help-octave
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: gnuplot with octave


From: आनन्द गौरव
Subject: Re: gnuplot with octave
Date: Sun, 1 Jan 2006 09:44:04 +0530

Thanks Marius,
ls -l ...
gives the whole list in that particular directory.
i saw, there does exist a file named dispatch.oct

I'll do the needful as suggested by you.
But meanwhile, can you tell if there is any workaround.

Thanks and Regards,
Anand


On 1/1/06, address@hidden <address@hidden> wrote:
> Anand,
>
> David Collett's instructions are somewhat out of date.
>
> What does
>
> ls -l 
> /usr/local/libexec/octave/2.1.72/site/oct/powerpc-apple-darwin8.3.0/octave-forge
>
> say?
>
> Please update octave-2.1.72-1-osx3.tar.gz to octave-2.1.72-2-osx3.tar.gz and 
> install gcc-3.4.5-1-
> osx4.tar.gz from hmug.org.
>
> IIRC, octave-2.1.72-1-osx3.tar.gz was built with g95 which I no longer 
> support.
>
> Marius
>
>
> > Thanks a lot Marius.
> > I already had the suggested lines added in my .octaverc.
> > I am easily able to run aquaterm from finder.
> > It just opens an icon without any error etc.
> > I followed hte rpocedure mentioned in
> > http://dcollett.macosx.com/octaveOSX104.html
> > But I think I had some problem installing octave-forge. maybe because
> > of something not installed properly.
> > can we make out something from the error:
> >
> > error: couldn't link module
> > /usr/local/libexec/octave/2.1.72/site/oct/powerpc-apple-darwin8.3.0/octave-forge
> > /dispatch.oct
> > error: `dispatch' undefined near line 2 column 1
> > error: near line 2 of file
> > `/usr/local/share/octave/2.1.72/site/m/octave-forge/comm//PKG_ADD'
> > error: source: error sourcing file
> > `/usr/local/share/octave/2.1.72/site/m/octave-forge/comm//PKG_ADD'
> > error: unterminated string constant
> > parse error near line 1 of file /Users/Anand/.octaverc
> >
> >   syntax error
> >
> > >>> LOADPATH = [
> > '/usr/local/libexec/octave/2.1.72/site/oct/powerpc-apple-darwin8.3.0/octave-forg
> > e:/
> >
> > octave:1>
> >
> >
> > The installed revisions are as follows:
> >
> > octave-forge-2005.06.13-2.1.72-1
> > and
> > octave-2.1.72-1-osx3.tar.gz
> >
> > But I did not install X11 and I already had Xcode installed.
> >
> > What do you suggest
> >
> > Regards,
> > Anand
> >
> > PS: Wish you a happy new year 2006.
> >
> >
> > On 12/28/05, address@hidden <address@hidden> wrote:
> > > Ananad,
> > >
> > > What happens when you try to launch Aquaterm from the Finder? BTW what 
> > > version
> > of Aquaterm do you
> > > have installed?
> > >
> > > This is what I meant with revision:
> > >
> > > package-version-revision-osx4.tar.gz.
> > >
> > > octave and octave forge should be:
> > >
> > > version 2.1.72 and 2005.06.13
> > > revision 2 and 2.1.72-2
> > >
> > > respectively.
> > >
> > > Make sure that you have /usr/local/bin in your PATH and to use X11 add
> > DISPLAY=localhost:0 in your
> > > shell preference file. If you want to use X11 as your gnuplot terminal, 
> > > X11
> > must first be launched.
> > >
> > > Also make sure you create an .octaverc  with the following:
> > >
> > > LOADPATH = [
> > '/usr/local/libexec/octave/2.1.72/site/oct/powerpc-apple-darwin8.3.0/octave-forg
> > e:/
> > > usr/local/share/octave/2.1.72/site/m/octave-forge//:', LOADPATH ];
> > > EXEC_PATH = [
> > '/usr/local/libexec/octave/2.1.72/site/exec/powerpc-apple-darwin8.3.0:',
> > > EXEC_PATH ];
> > >
> > > This should fix the dispatch problem.
> > >
> > > Marius
> > >
> > >
> > > > Thanks Marius.
> > > > I installed it from hmug.org. I used the following version for 
> > > > octave-forge.
> > > > octave-forge-2005.06.13
> > > > What do you suggest I should do?
> > > >
> > > >
> > > > On 12/28/05, address@hidden <address@hidden> wrote:
> > > > > Anand,
> > > > >
> > > > > It doesn't seem to find the Aquaterm dylib. Can you launch Aquaterm 
> > > > > from
> > the
> > > > Finder?
> > > > >
> > > > > Given that you have installed into /usr/local, you are not using Fink 
> > > > > or
> > > > DarwinPorts. Did you build octave/
> > > > > octave-forge yourself or did you install from hmug.org? If so, which
> > revision?
> > > > >
> > > > > Marius
> > > > >
> > > > >
> > > > > > I have got Aqua installed as well as gnuplot but have some problem
> > > > > > plotting outputs.
> > > > > > I get the following error while plotting.
> > > > > > My system is mac, os X,tiger.
> > > > > >
> > > > > > octave:2>plot(y)
> > > > > > dyld: Library not loaded:
> > > > > > /Library/Frameworks/AquaTerm.framework/Versions/A/AquaTerm
> > > > > >   Referenced from: /usr/local/bin/gnuplot
> > > > > >   Reason: image not found
> > > > > >
> > > > > > Can somebody help.
> > > > > >
> > > > > > when i simply type gnuplot, I get similar error:
> > > > > >
> > > > > > [anand-gauravs-ibook-g4:~] Anand% gnuplot
> > > > > > dyld: Library not loaded:
> > > > > > /Library/Frameworks/AquaTerm.framework/Versions/A/AquaTerm
> > > > > >   Referenced from: /usr/local/bin/gnuplot
> > > > > >   Reason: image not found
> > > > > > Trace/BPT trap
> > > > > >
> > > > > >
> > > > > > On invoking, I get following error messege:
> > > > > >
> > > > > > error: couldn't link module
> > > > > >
> > > >
> > /usr/local/libexec/octave/2.1.72/site/oct/powerpc-apple-darwin8.3.0/octave-forge
> > > > > > /dispatch.oct
> > > > > > error: `dispatch' undefined near line 2 column 1
> > > > > > error: near line 2 of file
> > > > > > `/usr/local/share/octave/2.1.72/site/m/octave-forge/comm//PKG_ADD'
> > > > > > error: source: error sourcing file
> > > > > > `/usr/local/share/octave/2.1.72/site/m/octave-forge/comm//PKG_ADD'
> > > > > > error: unterminated string constant
> > > > > > parse error near line 2 of file /Users/Anand/.octaverc
> > > > > > syntax error
> > > > > >
> > > > > > Hoping for some help.
> > > > > >
> > > > > > Regards,
> > > > > > Anand
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > -------------------------------------------------------------
> > > > > Octave is freely available under the terms of the GNU GPL.
> > > > >
> > > > > Octave's home on the web:  http://www.octave.org
> > > > > How to fund new projects:  http://www.octave.org/funding.html
> > > > > Subscription information:  http://www.octave.org/archive.html
> > > > > -------------------------------------------------------------
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > -------------------------------------------------------------
> > > > Octave is freely available under the terms of the GNU GPL.
> > > >
> > > > Octave's home on the web:  http://www.octave.org
> > > > How to fund new projects:  http://www.octave.org/funding.html
> > > > Subscription information:  http://www.octave.org/archive.html
> > > > -------------------------------------------------------------
> > > >
> > >
>



-------------------------------------------------------------
Octave is freely available under the terms of the GNU GPL.

Octave's home on the web:  http://www.octave.org
How to fund new projects:  http://www.octave.org/funding.html
Subscription information:  http://www.octave.org/archive.html
-------------------------------------------------------------



reply via email to

[Prev in Thread] Current Thread [Next in Thread]