[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
How to only show the raw commands run and the working directory?
From: |
Peng Yu |
Subject: |
How to only show the raw commands run and the working directory? |
Date: |
Fri, 8 Feb 2019 11:42:46 -0600 |
Hi,
For example, if I run the following commands. It shows many other
things that I don't need, like `Putting child 0x7f9ceec09200 ...`,
`Live child 0x7f9ceec09200 ...`
$ make --debug=j check
https://github.com/westes/flex/tree/master/tests
Also, it doesn't show the commands called to produce the "PASS"
results like below. Is there a way to only show the raw commands and
the corresponding working directory for each command? Thanks.
Putting child 0x7fcd8af3d770 (tableopts_opt_nr-Cae.log) PID 69330 on the chain.
Live child 0x7fcd8af3d770 (tableopts_opt_nr-Cae.log) PID 69330
PASS: tableopts_opt_nr-Cae.opt
Reaping winning child 0x7fcd8af3d770 PID 69330
Removing child 0x7fcd8af3d770 PID 69330 from chain.
Putting child 0x7fcd8af3dd20 (tableopts_opt_nr-Caef.log) PID 69337 on the chain.
Live child 0x7fcd8af3dd20 (tableopts_opt_nr-Caef.log) PID 69337
PASS: tableopts_opt_nr-Caef.opt
Reaping winning child 0x7fcd8af3dd20 PID 69337
Removing child 0x7fcd8af3dd20 PID 69337 from chain.
--
Regards,
Peng
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- How to only show the raw commands run and the working directory?,
Peng Yu <=