help-hurd
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

boot hangs on network device driver load


From: Paul Bukowski
Subject: boot hangs on network device driver load
Date: Mon, 31 Jan 2005 21:47:45 +0000

Hello!
My first boot of hurd:
gnumach is booting (i think so), it recognizes hd0 (hurd drive) hd1 (cdrom)... scsi not found... and then rtl8139 driver is loaded with irq 9. After that it tries to load via-rhine network driver (i don't have that card) and system hungs :(

On linux i've got:
aristo% cat /proc/interrupts
          CPU0
 0:    1857780          XT-PIC  timer
 1:       4022          XT-PIC  i8042
 2:          0          XT-PIC  cascade
 3:       9123          XT-PIC  serial
 4:        838          XT-PIC  Intel 82801CA-ICH3
 8:          2          XT-PIC  rtc
 9:       1954          XT-PIC  acpi, uhci_hcd, eth0
10:          1          XT-PIC  uhci_hcd, i915@pci:0000:00:02.0
12:     199558          XT-PIC  i8042
14:      12940          XT-PIC  ide0
NMI:          0
LOC:          0
ERR:          0
MIS:          0

I think it can be because usb is shared with eth0, but there is no load of usb driver on hurd! and any other driver is not on irq9....

Any sugestions?

Paul Bukowski




reply via email to

[Prev in Thread] Current Thread [Next in Thread]