[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Mach unable to boot (?)
From: |
asubedi |
Subject: |
RE: Mach unable to boot (?) |
Date: |
Fri, 18 Jul 2003 12:40:52 -0500 |
>===== Original Message From Robert Millan <zeratul2@wanadoo.es> =====
[snip]
>--
Hello,
>Robert Millan
I was successfuly able to install the Debian GNU/Hurd K3 in my laptop with
little effort. I dont have a floppy drive in my laptop so I did not read about
any grub image stuff in the installation manual, however the grub command in
the grub.conf that I used last time worked perfectly. I did not install most
of the packages and X since it was already about 2 last night... My mach
kernel and the whole system sits at hd0s6. The boot message gave some error
while reading the hd0s4 (start of the extended partion). I am yet to check the
log messages to know what exactly is going on. Also, the initial boot message
recognizes my ide/atapi dvd/cdrw as hd2 but the Hurd does not seem to set the
translator properly for the iso9660fs. It just dumps the `core' to the mount
point. I will file the appropriate bugs soon.
A. Subedi