help-hurd
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Hurd installation trouble


From: Alfred M. Szmidt
Subject: Re: Hurd installation trouble
Date: Fri, 23 May 2003 11:36:00 +0200

   I used a old Debian Net Install CDROM to untar the
   gnu-latest.tar.gz on my first Partition (/dev/hda1) which i
   formated with `mke2fs /dev/hda1`.  Partition size is 1.5 GB. I
   tried also to format the Partition with `mke2fs -o hurd /dev/hda1`
   but if i do so, grub can't read this Disk.

Thats a new one.  Could you try to figure out what happened?  GRUB
shouldn't see any difference between a partition formated with "-o
hurd" and one that is formated without it.  Since they are basically
the same.

   apt-get update (just for testing):
   E: Failed to create IPC pipe to subprocess - pipe (-303 (ipc/mig) bad
   request message ID)
   E: Failed to create IPC pipe to subprocess - pipe (-303 (ipc/mig) bad
   request message ID)
   <snip>

This one is easy, you didn't format with "-o hurd".  Since if you
don't use that switch, you won't be able to create translators.

   Any hints what i did wrong ?

Did you read Neal H. Walfields installation guide?  You can find it at
http://hurd.gnu.org




reply via email to

[Prev in Thread] Current Thread [Next in Thread]