[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Guix Printing Problems
Re: Guix Printing Problems
Thu, 23 Sep 2021 15:16:49 +0300
On Thu, Sep 23, 2021 at 09:30:44PM +1000, Peter wrote:
> Greetings! This is my first post. I hope I'm doing it right, and please
> forgive me if I'm not.
> I have installed GUIX (including CUPS) onto a Lenovo ThinkCentre P520c,
> successfully except that I cannot print from within the Guix installation. I
> have a trusty Brother HL-5350DN laser printer connected via ethernet to my
> local network. Pointing the browser to http//:localhost:631 brings up a CUPS
> interface, but produces an error message: "The web interface is currently
> disabled. Run "cupsctl WebInterface=yes" to enable it." I try that but
> "command not found". Commands I have used like 'systemctl start cups.service'
> etc don't work on Guix either. Is there a Guix equivalent? Attempts to enable
> the Web interface via the config.scm (GNU Guix Reference Manual 10.8.7) have
> also failed.
> And yet: if I type the IP address of the printer '192.168.1.108' directly
> into the browser, it shows up as "http://192.168.1.108/printer/main.html" and
> I find myself in a Brother utility for the printer, from which I can
> successfully do a test print. The Brother utility has a number of screens:
> Home Page, View Configuration, Maintenance Information, Find Device, Printer
> Settings, Administrator Settings, Reset & Test, Network Configuration.
> This ought to be encouraging, but when I attempt to print a working text
> document (e.g. via Gedit) although the printer is listed (along with IP
> address and all usual data) it says "Processing - Not connected?", despite
> the system clearly knowing the address etc.
> I set the printer up normally in Gnome Print Settings, but if I look at the
> View Print Queue, it says "Document Print Status: Processing - Not
> connected?". If I go into Server Settings to check the 'Publish shared
> printers connected to this system' setting the troubleshooter recommended, I
> get "CUPS server error: There was an error during CUPS operation: 'Failed to
> set settings'". Troubleshooting's final verdict is "There is no obvious
> solution to this problem."
> I'm foxed, and frustrated, and as a desperate work-round I have to ssh the
> file to another machine to be printed. By the way, I have successfully set up
> printing for MacOS, nixOS, Debian, and Arch, but GUIX (alone) fails to find
> the printer, except via the Brother utility.
> Any clues? I earnestly want this FSF-endorsed distribution to work.
> I'm including my config.scm, and the troubleshooting report.
Try adding yourself to the 'lp' group, under supplementary-groups. I
have myself added to the lp and the lpadmin group, I can never remember
which is the correct one.
Efraim Flashner <email@example.com> רנשלפ םירפא
GPG key = A28B F40C 3E55 1372 662D 14F7 41AA E7DC CA3D 8351
Confidentiality cannot be guaranteed on emails sent or received unencrypted
Description: PGP signature