Re: core-updates call for testing

[Marius Bakke]

sirgazil <address@hidden> writes:

>  ---- On Fri, 24 Apr 2020 03:20:41 +0000 sirgazil <address@hidden> wrote ----
>  >  ---- On Thu, 23 Apr 2020 23:24:23 +0000 Marius Bakke <address@hidden> 
> wrote ----
>  >  > Hello Guix!
>  >  > 
>  >  > The "core-updates" branch is ready for testing!  According to 'guix
>  >  > weather', the substitute coverage is slightly better than on "master"
>  >  > for x86_64.  You can get it by running:
>  >  > 
>  >  >   guix pull --branch=core-updates
>  >  > 
>  >  > Please try upgrading your profiles and systems and file bugs for
>  >  > anything that does not work for you.  GNOME users in particular are
>  >  > encouraged to try the new GNOME 3.34 and report any regressions.
>  > 
>  > I pulled from core-updates without problems, but "guix upgrade" failed.
>  > 
>  > First, when running "guix upgrade", I got the following message, which I 
> think is confusing because I use GNU, not Guix on a foreign distro:
>  > 
>  >     $ guix upgrade
>  >     guile: warning: failed to install locale
>  >     hint: Consider installing the `glibc-utf8-locales' or `glibc-locales' 
> package and defining `GUIX_LOCPATH', along these lines:
>  > 
>  >          guix package -i glibc-utf8-locales
>  >          export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale"
>  > 
>  >     See the "Application Setup" section in the manual, for more info.
>  > 
>  > Then, everything was going alright, until building emacs-guix derivation 
> failed:
>  > 
>  >     building 
> /gnu/store/6kdl0pyv7i571d6b4vcxskr75ffqw1mk-emacs-guix-0.5.2.drv...
>  >     \ 'configure' phasebuilder for 
> `/gnu/store/6kdl0pyv7i571d6b4vcxskr75ffqw1mk-emacs-guix-0.5.2.drv' failed 
> with exit code 1
>  >     build of 
> /gnu/store/6kdl0pyv7i571d6b4vcxskr75ffqw1mk-emacs-guix-0.5.2.drv failed
>  >     View build log at 
> '/var/log/guix/drvs/6k/dl0pyv7i571d6b4vcxskr75ffqw1mk-emacs-guix-0.5.2.drv.bz2'.
>  >     guix upgrade: error: build of 
> `/gnu/store/6kdl0pyv7i571d6b4vcxskr75ffqw1mk-emacs-guix-0.5.2.drv' failed
>  > 
>  > 
>  > The build log said:
>  > 
>  >     starting phase `configure'
>  >     source directory: 
> "/tmp/guix-build-emacs-guix-0.5.2.drv-0/emacs-guix-0.5.2" (relative from 
> build: ".")
>  >     build directory: 
> "/tmp/guix-build-emacs-guix-0.5.2.drv-0/emacs-guix-0.5.2"
>  >     configure flags: 
> ("CONFIG_SHELL=/gnu/store/pwcp239kjf7lnj5i4lkdzcfcxwcfyk72-bash-minimal-5.0.16/bin/bash"
>  
> "SHELL=/gnu/store/pwcp239kjf7lnj5i4lkdzcfcxwcfyk72-bash-minimal-5.0.16/bin/bash"
>  "--prefix=/gnu/store/bqplgazij77awh62579p56wbnxdb1c2l-emacs-guix-0.5.2" 
> "--enable-fast-install" "--build=x86_64-unknown-linux-gnu")
>  >     configure: WARNING: unrecognized options: --enable-fast-install
>  >     checking for a BSD-compatible install... 
> /gnu/store/57xj5gcy1jbl9ai2lnrqnpr0dald9i65-coreutils-8.32/bin/install -c
>  >     checking whether build environment is sane... yes
>  >     checking for a thread-safe mkdir -p... 
> /gnu/store/57xj5gcy1jbl9ai2lnrqnpr0dald9i65-coreutils-8.32/bin/mkdir -p
>  >     checking for gawk... gawk
>  >     checking whether make sets $(MAKE)... no
>  >     checking whether make supports nested variables... yes
>  >     checking whether make supports nested variables... (cached) yes
>  >     checking for pkg-config... 
> /gnu/store/krpyb0zi700dcrg9cc8932w4v0qivdg9-pkg-config-0.29.2/bin/pkg-config
>  >     checking pkg-config is at least version 0.9.0... yes
>  >     configure: checking for guile 2.2
>  >     configure: checking for guile 2.0
>  >     configure: error: 
>  >     No Guile development packages were found.
>  > 
>  >     Please verify that you have Guile installed.  If you installed Guile
>  >     from a binary distribution, please verify that you have also installed
>  >     the development packages.  If you installed it yourself, you might need
>  >     to adjust your PKG_CONFIG_PATH; see the pkg-config man page for more.
>  > 
>  >     command 
> "/gnu/store/pwcp239kjf7lnj5i4lkdzcfcxwcfyk72-bash-minimal-5.0.16/bin/bash" 
> "./configure" 
> "CONFIG_SHELL=/gnu/store/pwcp239kjf7lnj5i4lkdzcfcxwcfyk72-bash-minimal-5.0.16/bin/bash"
>  
> "SHELL=/gnu/store/pwcp239kjf7lnj5i4lkdzcfcxwcfyk72-bash-minimal-5.0.16/bin/bash"
>  "--prefix=/gnu/store/bqplgazij77awh62579p56wbnxdb1c2l-emacs-guix-0.5.2" 
> "--enable-fast-install" "--build=x86_64-unknown-linux-gnu" failed with status 
> 1
>  > 
>  > 
>
>
> Then, I decided to remove emacs-guix, and try again to upgrade. This time, 
> one of my packages in a custom channel failed with "no code for (term 
> ansi-color)" (the package definition: 
> https://gitlab.com/sirgazil/guix-channel-x/-/blob/master/sirgazil-x/packages/guile.scm#L13).
>  This is not a new package in my profile, I've been using it for a long time. 
> Since both error seemed to be related to Guile, I removed all Guile-related 
> packages from my profile and tried upgrading again. This time, the upgrade 
> succeeded.

Thanks for testing!  I fixed the emacs-guix issue in commit
f568581c2bfb3a7367442c9ccc23613c43f6f1e9 plus some related changes in
962554ddcf86675362486a683acd94863ba68d8a and
9b42918edd3f7e9d505c874d3947c0a0815fe551.

> I moved on to reconfiguring the system with "sudo system reconfigure 
> my-gnome-config.scm", which failed with the following error:
>
> downloading from 
> https://ci.guix.gnu.org/nar/lzip/24yvi2yyknfrpyb7linxd09dkpc560xp-nss-certs-3.50
>  ...
>  nss-certs-3.50  133KiB                                                       
>                                                                               
>                                         314KiB/s 00:00 [########          ]  
> 48.3%Backtrace:
>            3 (apply-smob/1 #<catch-closure 7fb8bcb391e0>)
> In ice-9/boot-9.scm:
>     705:2  2 (call-with-prompt _ _ #<procedure default-prompt-handle?>)
> In ice-9/eval.scm:
>     619:8  1 (_ #(#(#<directory (guile-user) 7fb8bc7cf140>)))
> In guix/ui.scm:
>   1936:12  0 (run-guix-command _ . _)
>
> guix/ui.scm:1936:12: In procedure run-guix-command:
> Throw to key `encoding-error' with args `("scm_to_stringn" "cannot convert 
> wide string to output locale" 84 #f #f)'.
> substitution of /gnu/store/24yvi2yyknfrpyb7linxd09dkpc560xp-nss-certs-3.50 
> failed
> killing process 2771
> guix system: error: some substitutes for the outputs of derivation 
> `/gnu/store/qnc4hww9jcc3sdd0hqs0n6zsfirf8h5r-nss-certs-3.50.drv' failed 
> (usually happens due to networking issues); try `--fallback' to build 
> derivation from source

I'm not sure what the problem here is.  Can you try adding --fallback to
the upgrade command?

signature.asc
Description: PGP signature