[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Brother HL-2130: CUPS, foomatic, hpijs
From: |
Pierre Neidhardt |
Subject: |
Brother HL-2130: CUPS, foomatic, hpijs |
Date: |
Fri, 20 Jul 2018 11:40:06 +0200 |
User-agent: |
mu4e 1.0; emacs 26.1 |
Hi there!
Trying to get a Brother HL-2130 running on my GuixSD here.
I had a glimpse at
https://lists.gnu.org/archive/html/help-guix/2017-09/msg00099.html
According to
https://wiki.archlinux.org/index.php/CUPS/Printer-specific_problems#Brother
it should work with
foomatic (using the HL-2140 driver) or hplip
Both of which seem to be the same according to
http://www.openprinting.org/printer/Brother/Brother-HL-2140
So I've setup a CUPS print with the following PPD:
http://www.openprinting.org/ppd-o-matic.php?driver=hpijs-pcl5e&printer=Brother-HL-2140&show=0
Printing a test page yields an error.
Excerpt from the /var/log/cups/error_log:
--8<---------------cut here---------------start------------->8---
D [20/Jul/2018:11:27:01 +0200] [Job 1]
================================================
D [20/Jul/2018:11:27:01 +0200] [Job 1] File: <STDIN>
D [20/Jul/2018:11:27:01 +0200] [Job 1]
================================================
D [20/Jul/2018:11:27:01 +0200] [Job 1] PAGE: 1 1
D [20/Jul/2018:11:27:01 +0200] [Job 1] Filetype: PDF
D [20/Jul/2018:11:27:01 +0200] [Job 1] Storing temporary files in
/var/spool/cups/tmp
D [20/Jul/2018:11:27:01 +0200] [Job 1] PID 8125
(/gnu/store/sa5f2am437p2zfz0awj3mg0j5wk6dl7a-cups-server-bin/lib/cups/filter/pdftopdf)
exited with no errors.
D [20/Jul/2018:11:27:01 +0200] [Job 1] File contains 1 pages
D [20/Jul/2018:11:27:01 +0200] [Job 1] Starting renderer with command: gs
-dShowAcroForm -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -dNOMEDIAATTRS
-dNOINTERPOLATE -sDEVICE=ijs -sIjsServer=hpijs
-sDeviceManufacturer=\"HEWLETT-PACKARD\" -sDeviceModel=\"HP LaserJet\"
-dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -dDuplex=false -r300
-sIjsParams=Quality:Quality=1,Quality:ColorMode=0,Quality:MediaType=0,Quality:PenSet=0,PS:MediaPosition=7
-dIjsUseOutputFD -sOutputFile=- /var/spool/cups/tmp/foomatic-iD2WWS
D [20/Jul/2018:11:27:01 +0200] [Job 1] Starting process \"kid3\" (generation 1)
D [20/Jul/2018:11:27:01 +0200] [Job 1] Starting process \"kid4\" (generation 2)
D [20/Jul/2018:11:27:01 +0200] [Job 1] Starting process \"renderer\"
(generation 2)
D [20/Jul/2018:11:27:01 +0200] [Job 1] JCL: address@hidden
D [20/Jul/2018:11:27:01 +0200] [Job 1] <job data>
D [20/Jul/2018:11:27:01 +0200] [Job 1] sh: hpijs: command not found
D [20/Jul/2018:11:27:01 +0200] [Job 1] GPL Ghostscript 9.23: Can\'t start ijs
server \"hpijs\"
D [20/Jul/2018:11:27:01 +0200] [Job 1] **** Unable to open the initial device,
quitting.
D [20/Jul/2018:11:27:01 +0200] [Job 1] renderer exited with status 1
D [20/Jul/2018:11:27:01 +0200] [Job 1] Possible error on renderer command line
or PostScript error. Check options.Kid3 exit status: 3
D [20/Jul/2018:11:27:01 +0200] [Job 1] PID 8126
(/gnu/store/sa5f2am437p2zfz0awj3mg0j5wk6dl7a-cups-server-bin/lib/cups/filter/foomatic-rip)
stopped with status 9.
D [20/Jul/2018:11:27:01 +0200] [Job 1] PID 8127
(/gnu/store/sa5f2am437p2zfz0awj3mg0j5wk6dl7a-cups-server-bin/lib/cups/backend/usb)
exited with no errors.
D [20/Jul/2018:11:27:01 +0200] [Job 1] End of messages
D [20/Jul/2018:11:27:01 +0200] [Job 1] printer-state=3(idle)
D [20/Jul/2018:11:27:01 +0200] [Job 1] printer-state-message="Filter failed"
D [20/Jul/2018:11:27:01 +0200] [Job 1] printer-state-reasons=none
--8<---------------cut here---------------end--------------->8---
I think the issue is that the hpijs command is missing.
On Debian, it's packaged as
/usr/bin/hpijs printer-driver-hpijs [not powerpc]
Do we need this piece of software?
--
Pierre Neidhardt
signature.asc
Description: PGP signature
- Brother HL-2130: CUPS, foomatic, hpijs,
Pierre Neidhardt <=