Re: ath wireless power management failure

[Ricardo Wurmus]

Tiberiu <address@hidden> writes:

> Do you also have ath9k log messages and if so, could you please paste
> them here? Also, what chip does your WiFi card have?

There aren’t many ath9k log messages.  Here are the messages from
yesterday and today:

Feb  6 00:35:57 localhost vmunix: [   11.849588] ath9k 0000:02:00.0: enabling 
device (0000 -> 0002)
Feb  6 00:35:57 localhost vmunix: [   12.052196] ath9k 0000:02:00.0 wlp2s0: 
renamed from wlan0
Feb  6 09:23:44 localhost vmunix: [   12.052555] ath9k 0000:02:00.0 wlp2s0: 
renamed from wlan0
Feb  6 16:41:02 localhost vmunix: [21782.562086] [<ffffffffc0687570>] ath_isr 
[ath9k]
Feb  6 16:48:04 localhost vmunix: [   67.024255] ath9k 0000:02:00.0 wlp2s0: 
renamed from wlan0
Feb  6 18:18:40 localhost vmunix: [ 5507.166605] [<ffffffffc02eb570>] ath_isr 
[ath9k]
Feb  6 18:25:22 localhost vmunix: [   25.190524] ath9k 0000:02:00.0 wlp2s0: 
renamed from wlan0
Feb  6 22:02:25 localhost vmunix: [   53.568402] ath9k 0000:02:00.0 wlp2s0: 
renamed from wlan0
Feb  7 07:49:13 localhost vmunix: [ 4619.392030] ath9k 0000:02:00.0: Refused to 
change power state, currently in D3
Feb  7 07:53:51 localhost vmunix: [   64.161516] ath9k 0000:02:00.0 wlp2s0: 
renamed from wlan0
Feb  7 08:39:19 localhost vmunix: [ 2787.166577] [<ffffffffc0557570>] ath_isr 
[ath9k]
Feb  7 08:50:07 localhost vmunix: [   18.319719] ath9k 0000:02:00.0: enabling 
device (0000 -> 0002)
Feb  7 08:50:07 localhost vmunix: [   18.652179] ath9k 0000:02:00.0 wlp2s0: 
renamed from wlan0
Feb  7 11:55:49 localhost vmunix: [   69.031690] ath9k 0000:02:00.0 wlp2s0: 
renamed from wlan0

lspci says this about my network controller:

02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter 
(PCI-Express) (rev 01)

It used to work fine for several months.  Not sure if it’s failing or if
there’s bad interaction with the kernel/libreboot.

--
Ricardo

GPG: BCA6 89B6 3655 3801 C3C6  2150 197A 5888 235F ACAC
https://elephly.net