[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: No login prompt for the serial com port
From: |
Jordan Uggla |
Subject: |
Re: No login prompt for the serial com port |
Date: |
Thu, 13 Jul 2017 21:06:42 -0700 |
On Thu, Jul 13, 2017 at 7:12 PM, Hilbert Tu(杜睿哲_Pegatron)
<address@hidden> wrote:
> Hi Jordan,
>
> Thanks for your help.
>
> Following is the output of my system boot up parameters:
> address@hidden:~# cat /proc/cmdline
> console=ttyS1,115200 console=tty1 root=/dev/ram ramdisk_size=102400
That is very different than the kernel parameters you're passing when
using grub: root=/dev/ram0 iso-scan/filename=${isofile} console=tty1
console=ttyS1,115200n8 ramdisk_size=102400
It also appears as though you're loop booting from an iso image when
booting via grub, but not doing so when booting via uboot (no
iso-scan/filename= parameter when booted via uboot), which would be a
significant difference as well.
Try loading exactly the same kernel and initramfs, with exactly the
same kernel parameters ( console=ttyS1,115200 console=tty1
root=/dev/ram ramdisk_size=102400 ) using grub and I expect it will
boot the same way it does with uboot.
--
Jordan Uggla (Jordan_U on irc.freenode.net)