|
From: | rishat |
Subject: | Re: grub with serial line configuration using PCI serial adapter |
Date: | Mon, 17 Oct 2016 19:41:59 +0300 |
User-agent: | Roundcube Webmail/1.2.0 |
On 2016-10-17 19:16, Andrei Borzenkov wrote:
17.10.2016 16:16, rishat пишет:setserial -g /dev/ttyS[0-4] /dev/ttyS0, UART: 16550A, Port: 0xa880, IRQ: 21...When I tried to manually type a "serial --speed=115200 --unit=0 --word=8--parity=no --stop=1" in the grub command line it complains that COM1 port don't exist. I have played with unit and port attributes but without any luck.Does "serial --port=a880 ..." work? If not, what exactly happens? Note that you may need to load at least PCI bus driver (insmod pci) for this to work.
I've tried to use it that way but it didn't find com port again. I'll try to do insmod pci and write to you tomorrow.By the way is it possible to share documentation about some useful modules in the grub? I havn't found any information using google.
_______________________________________________ Help-grub mailing list address@hidden https://lists.gnu.org/mailman/listinfo/help-grub
[Prev in Thread] | Current Thread | [Next in Thread] |