[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
11/57: gnu: Remove python-setuptools and python2-setuptools from inputs
|
From: |
Hartmut Goebel |
|
Subject: |
11/57: gnu: Remove python-setuptools and python2-setuptools from inputs (part 2) |
|
Date: |
Thu, 13 Oct 2016 15:20:32 +0000 (UTC) |
htgoebel pushed a commit to branch wip-python-build-system
in repository guix.
commit 19f0155bdbd0fd32ec9f75a3dbe6cdb4a129d171
Author: Hartmut Goebel <address@hidden>
Date: Wed Sep 28 13:30:54 2016 +0200
gnu: Remove python-setuptools and python2-setuptools from inputs (part 2)
This patch contains the changes where removing setuptools from the inputs
affected some code-lines beside.
* gnu/packages/admin.scm: Remove all inputs, native-inputs and
propagated-inputs where python-setuptools and python2-setuptools are the
sole entries. Remove python-setuptools and python2-setuptools listed on a
line by its own from inputs, native-inputs and propagated-inputs.
* gnu/packages/backup.scm: Likewise.
* gnu/packages/bioinformatics.scm: Likewise.
* gnu/packages/docbook.scm: Likewise.
* gnu/packages/freedesktop.scm: Likewise.
* gnu/packages/lirc.scm: Likewise.
* gnu/packages/mp3.scm: Likewise.
* gnu/packages/nutrition.scm: Likewise.
* gnu/packages/openstack.scm: Likewise.
* gnu/packages/password-utils.scm: Likewise.
* gnu/packages/python.scm: Likewise.
* gnu/packages/rdf.scm: Likewise.
* gnu/packages/terminals.scm: Likewise.
* gnu/packages/version-control.scm: Likewise.
* gnu/packages/xdisorg.scm: Likewise.
---
gnu/packages/admin.scm | 3 +-
gnu/packages/backup.scm | 3 +-
gnu/packages/bioinformatics.scm | 46 +++-----
gnu/packages/docbook.scm | 3 +-
gnu/packages/freedesktop.scm | 3 +-
gnu/packages/lirc.scm | 3 +-
gnu/packages/mp3.scm | 3 +-
gnu/packages/nutrition.scm | 6 +-
gnu/packages/openstack.scm | 18 +--
gnu/packages/password-utils.scm | 3 +-
gnu/packages/python.scm | 227 +++++++++++++-------------------------
gnu/packages/rdf.scm | 3 +-
gnu/packages/terminals.scm | 3 +-
gnu/packages/version-control.scm | 3 +-
gnu/packages/xdisorg.scm | 3 +-
15 files changed, 110 insertions(+), 220 deletions(-)
diff --git a/gnu/packages/admin.scm b/gnu/packages/admin.scm
index f0df5ff..325c2df 100644
--- a/gnu/packages/admin.scm
+++ b/gnu/packages/admin.scm
@@ -1354,8 +1354,7 @@ of supported upstream metrics systems simultaneously.")
"1bfc2xiplpad6f2nwi48y0kps7xqnsll85dlz63cy8k5bysl6d20"))))
(build-system python-build-system)
(native-inputs
- `(("python2-setuptools" ,python2-setuptools)
- ("python2-pycrypto" ,python2-pycrypto)
+ `(("python2-pycrypto" ,python2-pycrypto)
("python2-httplib2" ,python2-httplib2)
("python2-passlib" ,python2-passlib)
("python2-nose" ,python2-nose)
diff --git a/gnu/packages/backup.scm b/gnu/packages/backup.scm
index c56e4e8..25e17e0 100644
--- a/gnu/packages/backup.scm
+++ b/gnu/packages/backup.scm
@@ -66,8 +66,7 @@
"duplicity-test_selection-tmp.patch"))))
(build-system python-build-system)
(native-inputs
- `(("python2-setuptools" ,python2-setuptools)
- ("util-linux" ,util-linux))) ;setsid command, for the tests
+ `(("util-linux" ,util-linux))) ;setsid command, for the tests
(inputs
`(("python" ,python-2)
("librsync" ,librsync)
diff --git a/gnu/packages/bioinformatics.scm b/gnu/packages/bioinformatics.scm
index b2631ff..3beb38e 100644
--- a/gnu/packages/bioinformatics.scm
+++ b/gnu/packages/bioinformatics.scm
@@ -213,8 +213,7 @@ structure of the predicted RNA.")
("libtool" ,libtool)
("zlib" ,zlib)
("python-nose" ,python2-nose)
- ("python-pysam" ,python2-pysam)
- ("python-setuptools" ,python2-setuptools)))
+ ("python-pysam" ,python2-pysam)))
(inputs
`(("htslib" ,htslib)
("samtools" ,samtools)
@@ -528,8 +527,7 @@ intended to behave exactly the same as the original BWK
awk.")
("samtools" ,samtools)))
(native-inputs
`(("python-pyyaml" ,python2-pyyaml)
- ("python-nose" ,python2-nose)
- ("python-setuptools" ,python2-setuptools)))
+ ("python-nose" ,python2-nose)))
(home-page "https://pythonhosted.org/pybedtools/";)
(synopsis "Python wrapper for BEDtools programs")
(description
@@ -1336,8 +1334,7 @@ well as many of the command line options.")
`(("python-numpy" ,python2-numpy)
("zlib" ,zlib)))
(native-inputs
- `(("python-nose" ,python2-nose)
- ("python-setuptools" ,python2-setuptools)))
+ `(("python-nose" ,python2-nose)))
(home-page "http://bitbucket.org/james_taylor/bx-python/";)
(synopsis "Tools for manipulating biological data")
(description
@@ -1401,7 +1398,6 @@ multiple sequence alignments.")
("zlib" ,zlib)))
(native-inputs
`(("python-cython" ,python-cython)
- ("python-setuptools" ,python-setuptools)
;; Dependencies below are are for tests only.
("samtools" ,samtools)
("bcftools" ,bcftools)
@@ -1572,9 +1568,8 @@ databases.")
("python-numpy" ,python2-numpy)
("python-scipy" ,python2-scipy)))
(native-inputs
- `(("python-mock" ,python2-mock) ; for tests
- ("python-pytz" ,python2-pytz) ; for tests
- ("python-setuptools" ,python2-setuptools)))
+ `(("python-mock" ,python2-mock) ; for tests
+ ("python-pytz" ,python2-pytz))) ; for tests
(home-page "https://github.com/YeoLab/clipper";)
(synopsis "CLIP peak enrichment recognition")
(description
@@ -1747,8 +1742,7 @@ time.")
("zlib" ,zlib)))
(native-inputs
`(("python-cython" ,python2-cython)
- ("python-nose" ,python2-nose)
- ("python-setuptools" ,python2-setuptools)))
+ ("python-nose" ,python2-nose)))
(home-page "http://crossmap.sourceforge.net/";)
(synopsis "Convert genome coordinates between assemblies")
(description
@@ -1846,8 +1840,7 @@ preparation protocols.")
(alist-delete 'check %standard-phases))))
(native-inputs
`(("python-cython" ,python-cython)
- ("python-nose" ,python-nose)
- ("python-setuptools" ,python-setuptools)))
+ ("python-nose" ,python-nose)))
(home-page "https://code.google.com/p/cutadapt/";)
(synopsis "Remove adapter sequences from nucleotide sequencing reads")
(description
@@ -2018,9 +2011,8 @@ trees (phylogenies) and characters.")
("python-pysam" ,python2-pysam)
("python-pybigwig" ,python2-pybigwig)))
(native-inputs
- `(("python-mock" ,python2-mock) ;for tests
- ("python-pytz" ,python2-pytz) ;for tests
- ("python-setuptools" ,python2-setuptools)))
+ `(("python-mock" ,python2-mock) ;for tests
+ ("python-pytz" ,python2-pytz))) ;for tests
(home-page "https://github.com/fidelram/deepTools";)
(synopsis "Tools for normalizing and visualizing deep-sequencing data")
(description
@@ -2676,8 +2668,7 @@ comment or quality sections.")
("python-pysam" ,python2-pysam)
("python-networkx" ,python2-networkx)))
(native-inputs
- `(("python-cython" ,python2-cython)
- ("python-setuptools" ,python2-setuptools)))
+ `(("python-cython" ,python2-cython)))
(home-page "http://grit-bio.org";)
(synopsis "Tool for integrative analysis of RNA-seq type assays")
(description
@@ -2923,8 +2914,7 @@ data. It also provides the bgzip, htsfile, and tabix
utilities.")
("python-numpy" ,python-numpy)
("python-matplotlib" ,python-matplotlib)))
(native-inputs
- `(("python-cython" ,python-cython)
- ("python-setuptools" ,python-setuptools)))
+ `(("python-cython" ,python-cython)))
(home-page "https://github.com/nboley/idr";)
(synopsis "Tool to measure the irreproducible discovery rate (IDR)")
(description
@@ -3412,9 +3402,8 @@ linker_so='gcc -shared'); defines")))))
("python-scipy" ,python2-scipy)
("python-matplotlib" ,python2-matplotlib)))
(native-inputs
- `(("python-mock" ,python2-mock) ;for tests
- ("python-pytz" ,python2-pytz) ;for tests
- ("python-setuptools" ,python2-setuptools)))
+ `(("python-mock" ,python2-mock) ;for tests
+ ("python-pytz" ,python2-pytz))) ;for tests
(home-page "http://genes.mit.edu/burgelab/miso/index.html";)
(synopsis "Mixture of Isoforms model for RNA-Seq isoform quantitation")
(description
@@ -3551,8 +3540,7 @@ files and writing bioinformatics applications.")
("python-pandas" ,python2-pandas)
("python-pysnptools" ,python2-pysnptools)))
(native-inputs
- `(("python-setuptools" ,python2-setuptools)
- ("python-mock" ,python2-mock)
+ `(("python-mock" ,python2-mock)
("python-nose" ,python2-nose)
("unzip" ,unzip)))
(home-page "https://github.com/PMBio/warpedLMM";)
@@ -3614,8 +3602,7 @@ the phenotype as it models the data.")
("python-h5py" ,python2-h5py)))
(native-inputs
`(("python-cython" ,python2-cython)
- ("python-nose" ,python2-nose)
- ("python-setuptools" ,python2-setuptools)))
+ ("python-nose" ,python2-nose)))
(home-page "https://github.com/PacificBiosciences/cDNA_primer";)
(synopsis "Analyze transcriptome data generated with the Iso-Seq
protocol")
(description
@@ -4739,8 +4726,7 @@ bioinformatics file formats, sequence alignment, and
more.")
;; should be removed.
`(("python-biopython" ,python2-biopython-1.66)))
(native-inputs
- `(("python-setuptools" ,python2-setuptools)
- ("python-nose" ,python2-nose)))
+ `(("python-nose" ,python2-nose)))
(home-page "http://github.com/fhcrc/seqmagick";)
(synopsis "Tools for converting and modifying sequence files")
(description
diff --git a/gnu/packages/docbook.scm b/gnu/packages/docbook.scm
index 3d18d45..8efe417 100644
--- a/gnu/packages/docbook.scm
+++ b/gnu/packages/docbook.scm
@@ -185,8 +185,7 @@ by no means limited to these applications.) This package
provides XML DTDs.")
(build-system python-build-system)
;; TODO: Add xfig/transfig for fig2dev utility
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("texlive" ,texlive)
+ `(("texlive" ,texlive)
("imagemagick" ,imagemagick) ;for convert
("inkscape" ,inkscape) ;for svg conversion
("docbook" ,docbook-xml)
diff --git a/gnu/packages/freedesktop.scm b/gnu/packages/freedesktop.scm
index 84154b3..4f885a0 100644
--- a/gnu/packages/freedesktop.scm
+++ b/gnu/packages/freedesktop.scm
@@ -251,8 +251,7 @@ of a the system to know what users are logged in, and
where.")
(native-inputs
`(("shared-mime-info" ,shared-mime-info) ;for tests
("hicolor-icon-theme" ,hicolor-icon-theme) ;for tests
- ("python-nose" ,python-nose)
- ("python-setuptools" ,python-setuptools)))
+ ("python-nose" ,python-nose)))
(home-page "http://freedesktop.org/wiki/Software/pyxdg";)
(synopsis "Implementations of freedesktop.org standards in Python")
(description
diff --git a/gnu/packages/lirc.scm b/gnu/packages/lirc.scm
index b8fbeb6..d4c2d18 100644
--- a/gnu/packages/lirc.scm
+++ b/gnu/packages/lirc.scm
@@ -134,5 +134,4 @@ on just one button press.")
(lambda _
(zero? (system* "make" "py2")))))))
(native-inputs
- `(("python2-setuptools" ,python2-setuptools)
- ("python2-cython" ,python2-cython))))))
+ `(("python2-cython" ,python2-cython))))))
diff --git a/gnu/packages/mp3.scm b/gnu/packages/mp3.scm
index 37407cd..eac2d23 100644
--- a/gnu/packages/mp3.scm
+++ b/gnu/packages/mp3.scm
@@ -470,8 +470,7 @@ compression format (.mpc files).")
(arguments
`(#:python ,python-2))
(native-inputs
- `(("python2-setuptools" ,python2-setuptools)
- ("python2-nose" ,python2-nose)
+ `(("python2-nose" ,python2-nose)
("python2-sphinx" ,python2-sphinx)
("python2-coverage" ,python2-coverage)))
(synopsis "MP3 tag ID3 metadata editor")
diff --git a/gnu/packages/nutrition.scm b/gnu/packages/nutrition.scm
index 6363798..9e0430b 100644
--- a/gnu/packages/nutrition.scm
+++ b/gnu/packages/nutrition.scm
@@ -52,11 +52,7 @@
`(("pygtk" ,python2-pygtk)
("sqlalchemy" ,python2-sqlalchemy)
("python-pillow" ,python2-pillow)
- ("elib.intl" ,python2-elib.intl)
- ;; XXX: This really isn't an input for gourmet but of pillow. Making
- ;; it a propagated input in pillow doesn't seem to get its site path
- ;; into gourmet's wrapper's PYTHONPATH however...
- ("python-setuptools" ,python2-setuptools)))
+ ("elib.intl" ,python2-elib.intl)))
(arguments
`(#:python ,python-2 ;exception and print syntax
#:tests? #f)) ;tests look bitrotted
diff --git a/gnu/packages/openstack.scm b/gnu/packages/openstack.scm
index 9cbce7b..eee066e 100644
--- a/gnu/packages/openstack.scm
+++ b/gnu/packages/openstack.scm
@@ -121,8 +121,7 @@ manner.")
("python-pyflakes-0.8.1" ,python-pyflakes-0.8.1)
("python-six" ,python-six)))
(inputs
- `(("python-setuptools" ,python-setuptools)
- ;; Tests
+ `(;; Tests
("python-testscenarios" ,python-testscenarios)))
(home-page "http://github.com/openstack-dev/hacking";)
(synopsis "OpenStack hacking guideline enforcement")
@@ -221,8 +220,7 @@ tested on Python version 3.2, 2.7 and 2.6.")
("python-subunit" ,python-subunit)
("python-testtools" ,python-testtools)))
(inputs
- `(("python-babel" ,python-babel)
- ("python-setuptools" ,python-setuptools)))
+ `(("python-babel" ,python-babel)))
(home-page "http://www.openstack.org/";)
(synopsis "Testr wrapper to provide functionality for OpenStack projects")
(description
@@ -290,8 +288,7 @@ portions of your testing code.")
(inputs
`(("python-pbr" ,python-pbr)))
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ;; Tests
+ `(;; Tests
("python-docutils" ,python-docutils)
("python-mock" ,python-mock)
("python-oslotest" ,python-oslotest)
@@ -345,8 +342,7 @@ extensions.")
`(("python-babel" ,python-babel)
("python-mock" ,python-mock)
("python-os-testr" ,python-os-testr)
- ("python-oslotest" ,python-oslotest)
- ("python-setuptools" ,python-setuptools)))
+ ("python-oslotest" ,python-oslotest)))
(home-page "http://www.openstack.org/";)
(synopsis "OpenStack functional testing library")
(description
@@ -483,8 +479,7 @@ in an application or library.")
("python-iso8601" ,python-iso8601)
("python-mock" ,python-mock)
("python-oslotest" ,python-oslotest)
- ("python-pbr" ,python-pbr)
- ("python-setuptools" ,python-setuptools)))
+ ("python-pbr" ,python-pbr)))
(home-page "http://launchpad.net/oslo";)
(synopsis "Python logging library of the Oslo project")
(description
@@ -656,8 +651,7 @@ handling.")
"1w4csvkah67rfpxylxnvs2s3594i0f9isy8pf4gnsqs5zirvjaa4"))))
(build-system python-build-system)
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-sphinx" ,python-sphinx)
+ `(("python-sphinx" ,python-sphinx)
;; and some packages for the tests
("openssl" ,openssl)
("python-coverage" ,python-coverage)
diff --git a/gnu/packages/password-utils.scm b/gnu/packages/password-utils.scm
index 30b538d..a535f02 100644
--- a/gnu/packages/password-utils.scm
+++ b/gnu/packages/password-utils.scm
@@ -249,8 +249,7 @@ random passwords that pass the checks.")
(native-inputs
`(("help2man" ,help2man)))
(inputs
- `(("python-setuptools" ,python2-setuptools)
- ("python2-xdo" ,python2-xdo)
+ `(("python2-xdo" ,python2-xdo)
("python2-pygpgme" ,python2-pygpgme)
("python2-pygtk" ,python2-pygtk)))
(propagated-inputs
diff --git a/gnu/packages/python.scm b/gnu/packages/python.scm
index 8954479..3862ad1 100644
--- a/gnu/packages/python.scm
+++ b/gnu/packages/python.scm
@@ -436,8 +436,7 @@ pidof, tty, taskset, pmap.")
"1z27wdxs5rj5xhhqfzvzn3yg682irkxw6dcs5jj7mcf97psk8gd8"))))
(build-system python-build-system)
(native-inputs
- `(("python-nose" ,python-nose)
- ("python-setuptools" ,python-setuptools)))
+ `(("python-nose" ,python-nose)))
(inputs
`(("python-py-bcrypt" ,python-py-bcrypt)))
(arguments
@@ -640,8 +639,7 @@ using Python 2.4 or higher and provides access to the Olson
timezone database.")
"0k43pi0p1dwpds2w0km3fw92wixzxv2vw7p09capxmjz5cfh23lw"))))
(build-system python-build-system)
(inputs
- `(("python-pytz" ,python-pytz)
- ("python-setuptools" ,python-setuptools)))
+ `(("python-pytz" ,python-pytz)))
(arguments `(#:tests? #f)) ; no test target
(home-page "http://babel.pocoo.org/";)
(synopsis
@@ -1344,8 +1342,7 @@ backported for previous versions of Python from 2.4 to
3.3.")
"0iv1c34npr4iynwpgv1vkjx9rjd18a85ir8c01gc5f7wp8iv7l1x"))))
(build-system python-build-system)
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-six" ,python-six)
+ `(("python-six" ,python-six)
("python-parse" ,python-parse)))
(arguments '(#:tests? #f)) ;TODO: tests require pytest
(home-page "https://github.com/jenisys/parse_type";)
@@ -1592,8 +1589,7 @@ code introspection, and logging.")
"@pytest.mark.xfail\n def test_remove_dir_prefix(self):")))))
(build-system python-build-system)
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-py" ,python-py)
+ `(("python-py" ,python-py)
("python-nose" ,python-nose)
("python-mock" ,python-mock)))
(home-page "http://pytest.org";)
@@ -1779,8 +1775,7 @@ result back.")
"0f4w84k8ck82syys7yg9maz93mqzc8p5ymis941x034v44jzq74m"))))
(build-system python-build-system)
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-pytest" ,python-pytest)))
+ `(("python-pytest" ,python-pytest)))
(home-page "http://pythonpaste.org/scripttest/";)
(synopsis "Python library to test command-line scripts")
(description "Scripttest is a Python helper library for testing
@@ -1808,8 +1803,7 @@ subprocess and see the output as well as any file
modifications.")
(propagated-inputs
`(("python-mimeparse" ,python-mimeparse)))
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-extras" ,python-extras)))
+ `(("python-extras" ,python-extras)))
(home-page "https://github.com/testing-cabal/testtools";)
(synopsis
"Extensions to the Python standard library unit testing framework")
@@ -1837,8 +1831,7 @@ compatibility.")
"1671jvrvqlmbnc42j7pc5y6vc37q44aiwrq0zic652pxyy2fxvjg"))))
(build-system python-build-system)
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-testtools" ,python-testtools)
+ `(("python-testtools" ,python-testtools)
("python-mimeparse" ,python-mimeparse)))
(home-page "https://launchpad.net/testscenarios";)
(synopsis "Pyunit extension for dependency injection")
@@ -1890,8 +1883,7 @@ use of resources by test cases.")
"1nkw9wfbvizmpajbj3in8ns07g7lwkiv8hip14jjlwk3cacls6jv"))))
(build-system python-build-system)
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-testtools" ,python-testtools)
+ `(("python-testtools" ,python-testtools)
("python-mimeparse" ,python-mimeparse)
("python-testscenarios" ,python-testscenarios)))
(home-page "http://launchpad.net/subunit";)
@@ -1954,9 +1946,7 @@ Python tests.")
(arguments
`(#:tests? #f)) ;; Most tests seem to use the Internet.
(inputs
- `(("python-fixtures-0.3.16" ,python-fixtures-0.3.16)
- ("python-pip" ,python-pip)
- ("python-setuptools" ,python-setuptools)))
+ `(("python-fixtures-0.3.16" ,python-fixtures-0.3.16)))
(home-page "https://launchpad.net/pbr";)
(synopsis "Change the default behavior of Python’s setuptools")
(description
@@ -1991,8 +1981,7 @@ and sensible default behaviors into your setuptools run.")
`(("python-fixtures" ,python-fixtures)
("python-mimeparse" ,python-mimeparse)
("python-mock" ,python-mock)
- ("python-setuptools" ,python-setuptools)
- ("python-six" ,python-six)
+ ("python-six" ,python-six)
("python-sphinx" ,python-sphinx)
("python-testrepository" ,python-testrepository)
("python-testresources" ,python-testresources)
@@ -2058,8 +2047,7 @@ Python tests.")
`(("python-fixtures-0.3.16" ,python-fixtures-0.3.16)
("python-testtools" ,python-testtools)))
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-subunit" ,python-subunit)
+ `(("python-subunit" ,python-subunit)
("python-mimeparse" ,python-mimeparse)))
(home-page "https://launchpad.net/testrepository";)
(synopsis "Database for Python test results")
@@ -2161,8 +2149,7 @@ backported from Python 2.7 for Python 2.4+.")
"1iypp6z46r19n4xmgx6m1lwmlpfjh8vapq8izigrqlaarvp2y64c"))))
(build-system python-build-system)
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-six" ,python-six)
+ `(("python-six" ,python-six)
("python-parse" ,python-parse)
("python-parse-type" ,python-parse-type)))
(arguments `(#:tests? #f)) ;TODO: tests require nose>=1.3 and
@@ -2290,8 +2277,7 @@ with sensible defaults out of the box.")
"0j0n38hg1jvrmyy68f9ikvzq1gs9g0sx4ws7maf8wi3bwbbqmfqy"))))
(build-system python-build-system)
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-jsonschema" ,python-jsonschema)
+ `(("python-jsonschema" ,python-jsonschema)
("python-pytest-cov" ,python-pytest-cov)))
(home-page "https://bitbucket.org/pypa/wheel/";)
(synopsis "Format for built Python packages")
@@ -2326,8 +2312,7 @@ installed with a newer @code{pip} or with wheel's own
command line utility.")
"0zsqrzlybf25xscgi7ja4s48y2abf9wvjkn47wh984qgs1fq2xy5"))))
(build-system python-build-system)
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-py" ,python-py)
+ `(("python-py" ,python-py)
("python-pytest" ,python-pytest)
("python-pytest-cov" ,python-pytest-cov)
("python-wheel" ,python-wheel)))
@@ -2390,8 +2375,7 @@ version numbers.")
"0hddbqjm4jq63y8jf44nswina1crjs16l9snb6m3vvgyg31klrrn"))))
(build-system python-build-system)
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-vcversioner" ,python-vcversioner)))
+ `(("python-vcversioner" ,python-vcversioner)))
(home-page "http://github.com/Julian/jsonschema";)
(synopsis "Implementation of JSON Schema for Python")
(description
@@ -2444,8 +2428,7 @@ somewhat intelligeble.")
"1556v2jppd8mjkkj66pxb5rcazm35jq81r233mdl8hfmz9n3icp1"))))
(build-system python-build-system)
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-pytest-runner" ,python-pytest-runner)))
+ `(("python-pytest-runner" ,python-pytest-runner)))
(arguments
'(#:tests? #f)) ; test suite doesn't work
(home-page "http://github.com/progrium/pyjwt";)
@@ -2574,8 +2557,7 @@ object.")
(("skipif.*") "skipif(True, reason=\"Guix\")\n"))
(zero? (system* "py.test")))))))
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-mock" ,python-mock)
+ `(("python-mock" ,python-mock)
("python-pytest" ,python-pytest)))
(home-page "https://virtualenv.pypa.io/";)
(synopsis "Virtual Python environment builder")
@@ -2623,8 +2605,7 @@ for Python.")
"1x0v41lp5m1pjix3l46zx02b7lqp2hflgpnxwkywxynvi3zz47xw"))))
(build-system python-build-system)
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-markupsafe" ,python-markupsafe)))
+ `(("python-markupsafe" ,python-markupsafe)))
(home-page "http://jinja.pocoo.org/";)
(synopsis "Python template engine")
(description
@@ -2669,8 +2650,7 @@ logic-free templating system Mustache.")
"1dvw3f8jgj6h0fxkghbgyclvdzc7l0ig7n0vis70awb5kczb9bs3"))))
(build-system python-build-system)
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-nose" ,python-nose)))
+ `(("python-nose" ,python-nose)))
(home-page "http://pythonhosted.org/joblib/";)
(synopsis "Using Python functions as pipeline jobs")
(description
@@ -2748,8 +2728,7 @@ reStructuredText.")
"011xizm3jnmf4cvs5i6kgf6c5nn046h79i8j0vd0f27yw9j3p4wl"))))
(build-system python-build-system)
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-jinja2" ,python-jinja2)
+ `(("python-jinja2" ,python-jinja2)
("python-docutils" ,python-docutils)
("python-pygments" ,python-pygments)))
(home-page "http://sphinx-doc.org/";)
@@ -2806,8 +2785,7 @@ sources.")
"0mkimp1fpdan4p3882vzcws4l594k71ich4g0wq97jbra7p602n0"))))
(build-system python-build-system)
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-pytz" ,python-pytz)
+ `(("python-pytz" ,python-pytz)
("python-six" ,python-six)))
(home-page "https://github.com/getpelican/feedgenerator";)
(synopsis
@@ -2960,8 +2938,7 @@ mining and data analysis.")
("python-six" ,python-six)
("python-pillow" ,python-pillow)))
(native-inputs
- `(("python-cython" ,python-cython)
- ("python-setuptools" ,python-setuptools)))
+ `(("python-cython" ,python-cython)))
(home-page "http://scikit-image.org/";)
(synopsis "Image processing in Python")
(description
@@ -2996,8 +2973,7 @@ mining and data analysis.")
;; Tests require a running Redis server
(arguments '(#:tests? #f))
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-pytest" ,python-pytest)))
+ `(("python-pytest" ,python-pytest)))
(home-page "https://github.com/andymccurdy/redis-py";)
(synopsis "Redis Python client")
(description
@@ -3168,8 +3144,7 @@ capabilities.")
("python2-pysnptools" ,python2-pysnptools)))
(native-inputs
`(("unzip" ,unzip)
- ("python2-mock" ,python2-mock)
- ("python2-setuptools" ,python2-setuptools)))
+ ("python2-mock" ,python2-mock)))
(home-page
"http://research.microsoft.com/en-us/um/redmond/projects/mscompbio/fastlmm/";)
(synopsis "Perform genome-wide association studies on large data sets")
(description
@@ -3309,8 +3284,7 @@ that client code uses to construct the grammar directly
in Python code.")
(("3") "2"))))))
(build-system python-build-system)
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-docutils" ,python-docutils)
+ `(("python-docutils" ,python-docutils)
("python-sphinx" ,python-sphinx)
("python-nose" ,python-nose)))
(home-page "https://pypi.python.org/pypi/numpydoc";)
@@ -3390,8 +3364,7 @@ transcendental functions).")
("python-pycairo" ,python-pycairo)
("python-cairocffi" ,python-cairocffi)))
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-dateutil" ,python-dateutil-2)
+ `(("python-dateutil" ,python-dateutil-2)
("python-six" ,python-six)
("python-pytz" ,python-pytz)
("python-numpy" ,python-numpy-bootstrap)
@@ -3517,8 +3490,7 @@ toolkits.")
("python2-pandas" ,python2-pandas)
("python2-six" ,python2-six)))
(native-inputs
- `(("unzip" ,unzip)
- ("python2-setuptools" ,python2-setuptools)))
+ `(("unzip" ,unzip)))
(home-page
"http://research.microsoft.com/en-us/um/redmond/projects/mscompbio/";)
(synopsis "Library for reading and manipulating genetic data")
(description
@@ -3547,8 +3519,7 @@ operators such as union, intersection, and difference.")
("pcre" ,pcre)
("r" ,r)))
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ("zlib" ,zlib)))
+ `(("zlib" ,zlib)))
(home-page "http://rpy.sourceforge.net/";)
(synopsis "Python interface to the R language")
(description "rpy2 is a redesign and rewrite of rpy. It is providing a
@@ -3863,8 +3834,7 @@ services for your Python modules and applications.")
"1w9x3dfrg8b5lqhpjl0fczfyf9842wbqwgxbjjq4vfpxv5jwm49l"))))
(build-system python-build-system)
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-nose" ,python-nose)))
+ `(("python-nose" ,python-nose)))
(inputs
`(("freetype" ,freetype)
("lcms" ,lcms)
@@ -3926,8 +3896,7 @@ a general image processing tool.")
(outputs '("out" "doc"))
(build-system python-build-system)
(native-inputs
- `(("pkg-config" ,pkg-config)
- ("python-setuptools" ,python-setuptools)))
+ `(("pkg-config" ,pkg-config)))
(arguments
`(#:phases
(alist-replace
@@ -3978,8 +3947,7 @@ a front-end for C compilers or analysis tools.")
(native-inputs
`(("pkg-config" ,pkg-config)
("python-sphinx" ,python-sphinx)
- ("python-pytest" ,python-pytest)
- ("python-setuptools" ,python-setuptools)))
+ ("python-pytest" ,python-pytest)))
(arguments
`(#:phases
(alist-cons-after
@@ -4064,8 +4032,7 @@ support for Python 3 and PyPy. It is based on cffi.")
(native-inputs
`(("pkg-config" ,pkg-config)
("python-sphinx" ,python-sphinx)
- ("python-docutils" ,python-docutils)
- ("python-setuptools" ,python-setuptools)))
+ ("python-docutils" ,python-docutils)))
(propagated-inputs
`(("python-xcffib" ,python-xcffib))) ; used at run time
(arguments
@@ -4142,8 +4109,7 @@ etc. The core of this module is a decorator factory.")
;; should be set to the path of the libdrmaa library.
(arguments '(#:tests? #f))
(native-inputs
- `(("python-nose" ,python-nose)
- ("python-setuptools" ,python-setuptools)))
+ `(("python-nose" ,python-nose)))
(home-page "https://pypi.python.org/pypi/drmaa";)
(synopsis "Python bindings for the DRMAA library")
(description
@@ -4251,8 +4217,7 @@ them as the version argument or in a SCM managed file.")
(propagated-inputs
`(("python-appdirs" ,python-appdirs)))
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-setuptools-scm" ,python-setuptools-scm)
+ `(("python-setuptools-scm" ,python-setuptools-scm)
("python-pytest" ,python-pytest)
("python-pytest-runner" ,python-pytest-runner)))
(home-page "http://github.com/jaraco/path.py";)
@@ -4307,8 +4272,7 @@ PickleShare.")
(base32 "0wwi1c6md4vkbcsfsf8dklf3vr4mcdj4mpxkanwgb6jb1432x5yw"))))
(build-system python-build-system)
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ("unzip" ,unzip)))
+ `(("unzip" ,unzip)))
(home-page "http://cheeseshop.python.org/pypi/simplegeneric";)
(synopsis "Python module for simple generic functions")
(description
@@ -4415,8 +4379,7 @@ without using the configuration machinery.")
`(("pkg-config" ,pkg-config)
("python-sphinx" ,python-sphinx)
("texlive" ,texlive)
- ("texinfo" ,texinfo)
- ("python-setuptools" ,python-setuptools)))
+ ("texinfo" ,texinfo)))
(arguments
`(#:phases
(modify-phases %standard-phases
@@ -4662,8 +4625,7 @@ implementation of D-Bus.")
"0w4jb0wpx785qw42r3h4fh7gl5w2968q48i7gygybsfxck8nzffs"))))
(build-system python-build-system)
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("sqlite" ,sqlite)))
+ `(("sqlite" ,sqlite)))
(arguments
`(#:phases
;; swap check and install phases
@@ -4698,8 +4660,7 @@ translate the complete SQLite API into Python.")
(build-system python-build-system)
(inputs
`(("libxml2" ,libxml2)
- ("libxslt" ,libxslt)
- ("python-setuptools" ,python-setuptools)))
+ ("libxslt" ,libxslt)))
(home-page "http://lxml.de/";)
(synopsis
"Python XML processing library")
@@ -4843,8 +4804,7 @@ interfaces in an easy and portable manner.")
(propagated-inputs
`(("python-decorator" ,python-decorator)))
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-nose" ,python-nose)))
+ `(("python-nose" ,python-nose)))
(home-page "http://networkx.github.io/";)
(synopsis "Python module for creating and manipulating graphs and
networks")
(description
@@ -5164,8 +5124,7 @@ applications.")
`(("zeromq" ,zeromq)))
(native-inputs
`(("pkg-config" ,pkg-config)
- ("python-nose" ,python-nose)
- ("python-setuptools" ,python-setuptools)))
+ ("python-nose" ,python-nose)))
(home-page "http://github.com/zeromq/pyzmq";)
(synopsis "Python bindings for 0MQ")
(description
@@ -5233,8 +5192,7 @@ PEP 8.")
(build-system python-build-system)
(inputs
`(("python-pytest" ,python-pytest)
- ("python-pytest-runner" ,python-pytest-runner)
- ("python-setuptools" ,python-setuptools)))
+ ("python-pytest-runner" ,python-pytest-runner)))
(home-page "https://github.com/flintwork/mccabe";)
(synopsis "McCabe checker, plugin for flake8")
(description
@@ -5254,8 +5212,7 @@ complexity of Python source code.")
(uri (pypi-uri "mccabe" version))
(sha256
(base32
- "0fi4a81kr5bcv5p4xgibqr595hyj5dafkqgsmfk96mfy8w71fajs"))))
- (inputs `(("python-setuptools" ,python-setuptools)))))
+ "0fi4a81kr5bcv5p4xgibqr595hyj5dafkqgsmfk96mfy8w71fajs"))))))
(define-public python2-mccabe-0.2.1
(package-with-python2 python-mccabe-0.2.1))
@@ -5311,8 +5268,7 @@ complexity of Python source code.")
"0bs9cz4fr99r2rwig1b8jwaadl1nan7kgpdzqwj0bwbckwbmh7nc"))))
(build-system python-build-system)
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-pep8" ,python-pep8)
+ `(("python-pep8" ,python-pep8)
("python-pyflakes" ,python-pyflakes)
("python-mccabe" ,python-mccabe)
("python-mock" ,python-mock)
@@ -5332,8 +5288,7 @@ complexity of Python source code.")
(define-public python-flake8-2.2.4
(package (inherit python-flake8)
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-pep8" ,python-pep8-1.5.7)
+ `(("python-pep8" ,python-pep8-1.5.7)
("python-pyflakes" ,python-pyflakes-0.8.1)
("python-mccabe" ,python-mccabe-0.2.1)
("python-mock" ,python-mock)
@@ -5366,8 +5321,7 @@ complexity of Python source code.")
"17zqjp9m4d1w3jf2rbbq5xshcw24q1vlcv24gkgfqqyyymajxahx"))))
(build-system python-build-system)
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-nose" ,python-nose)
+ `(("python-nose" ,python-nose)
("python-cython" ,python-cython)))
(home-page "https://github.com/lepture/mistune";)
(synopsis "Markdown parser in pure Python")
@@ -5426,8 +5380,7 @@ markdown_py is also provided to convert Markdown files to
HTML.")
"0nggns5kikn32yyda2zrj1xdmh49pi3v0drggcdwljbv36r8zdyw"))))
(build-system python-build-system)
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-nose" ,python-nose)))
+ `(("python-nose" ,python-nose)))
(arguments
`(#:phases
(modify-phases %standard-phases
@@ -5578,8 +5531,7 @@ should be stored on various operating systems.")
`(("fuse" ,fuse)
("attr" ,attr)))
(native-inputs
- `(("pkg-config" ,pkg-config)
- ("python-setuptools" ,python-setuptools)))
+ `(("pkg-config" ,pkg-config)))
(synopsis "Python bindings for FUSE")
(description
"Python-LLFUSE is a set of Python bindings for the low level FUSE API.")
@@ -5752,8 +5704,7 @@ fractional seconds) of a clock which never goes
backwards.")
"02bhhzijfhv8hmi1i54d4b0v43liwhnywhflvxsv4x3zax9s3afq"))))
(build-system python-build-system)
(inputs
- `(("python-nose" ,python-nose)
- ("python-setuptools" ,python-setuptools)))
+ `(("python-nose" ,python-nose)))
(home-page "http://webob.org/";)
(synopsis "WSGI request and response object")
(description
@@ -5781,8 +5732,7 @@ object to help create WSGI responses.")
;; Current test in setup.py does not work as of 1.0.0, so use nose to
;; run tests instead for now.
(replace 'check (lambda _ (zero? (system* "nosetests")))))))
- (native-inputs `(("python-nose" ,python-nose)
- ("python-setuptools" ,python-setuptools)))
+ (native-inputs `(("python-nose" ,python-nose)))
(home-page "http://www.python-excel.org/";)
(synopsis "Library for extracting data from Excel files")
(description "This packages provides a library to extract data from
@@ -5861,8 +5811,7 @@ printing of sub-tables by specifying a row range.")
`(("python-numexpr" ,python-numexpr)
("python-numpy" ,python-numpy)))
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-cython" ,python-cython)
+ `(("python-cython" ,python-cython)
("pkg-config" ,pkg-config)))
(inputs
`(("hdf5" ,hdf5)
@@ -6147,8 +6096,7 @@ library.")
"08cm8d4228fj0qnrysy3qv1a6022zr3dcs25amd14lgxil6vvx26"))))
(build-system python-build-system)
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-virtualenv" ,python-virtualenv)
+ `(("python-virtualenv" ,python-virtualenv)
;; Tests
("python-mock" ,python-mock)
("python-pytest" ,python-pytest)
@@ -6264,8 +6212,7 @@ a hash value.")
(close-port port)
#t))))))
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("libarchive" ,libarchive)))
+ `(("libarchive" ,libarchive)))
(home-page "https://github.com/Changaco/python-libarchive-c";)
(synopsis "Python interface to libarchive")
(description
@@ -6388,8 +6335,7 @@ automatically detect a wide range of file encodings.")
"16bf890xbdz3m30rsv2qacklh2rdn1zrfspfnwzx9g7vwz8yw4r1"))))
(build-system python-build-system)
(native-inputs
- `(("python-pytest" ,python-pytest)
- ("python-setuptools" ,python-setuptools)))
+ `(("python-pytest" ,python-pytest)))
(arguments
`(#:phases (alist-replace
'check
@@ -6804,8 +6750,7 @@ This allows one to make simple text-mode user interfaces
on Unix-like systems")
(propagated-inputs
`(("python-pytz" ,python-pytz)))
(native-inputs
- `(("python-nose" ,python-nose)
- ("python-setuptools" ,python-setuptools)))
+ `(("python-nose" ,python-nose)))
(home-page "https://github.com/kurtraschke/pyRFC3339";)
(synopsis "Python timestamp library")
(description "Python library for generating and parsing RFC 3339-compliant
@@ -6858,8 +6803,7 @@ addon modules.")
(patches (search-patches "python-configobj-setuptools.patch"))))
(build-system python-build-system)
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-six" ,python-six)))
+ `(("python-six" ,python-six)))
(synopsis "Config file reading, writing and validation")
(description "ConfigObj is a simple but powerful config file reader and
writer: an ini file round tripper. Its main feature is that it is very easy to
@@ -7344,8 +7288,7 @@ Blog, News or Announcements section to a Sphinx website.")
"1an5lkkqk1zha47198p42ji3m94xmzx1a03dn7866m87n4r4q8h5"))))
(build-system python-build-system)
(inputs
- `(("python-args" ,python-args)
- ("python-setuptools" ,python-setuptools)))
+ `(("python-args" ,python-args)))
(home-page "https://github.com/kennethreitz/clint";)
(synopsis "Command-line interface tools")
(description
@@ -7390,8 +7333,7 @@ Abstract Syntax Tree.")
"12rp1d9ba7nvd5rhaxi6xzx1rm67r1k1ylsrkzhpwnphqpb06cvj"))))
(build-system python-build-system)
(inputs
- `(("python-appdirs" ,python-appdirs)
- ("python-setuptools" ,python-setuptools)))
+ `(("python-appdirs" ,python-appdirs)))
(home-page "https://github.com/alex/rply";)
(synopsis "Parser generator for Python")
(description
@@ -7417,8 +7359,7 @@ with a new public API, and RPython support.")
(inputs
`(("python-astor" ,python-astor)
("python-clint" ,python-clint)
- ("python-rply" ,python-rply)
- ("python-setuptools" ,python-setuptools)))
+ ("python-rply" ,python-rply)))
(home-page "http://hylang.org/";)
(synopsis "Lisp frontend to Python")
(description
@@ -7555,8 +7496,7 @@ concurrent.futures package from Python 3.2")
(build-system python-build-system)
(arguments `(#:tests? #f))
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ;; some packages for tests
+ `(;; some packages for tests
("python-nose" ,python-nose)
("python-mock" ,python-mock)
("python-tornado" ,python-tornado)))
@@ -7611,8 +7551,7 @@ text.")
"0xwp929g7lvb1sghxfpqlxvgg96qcwqdbhh27sjplx30n3xp3wrh"))))
(build-system python-build-system)
(inputs
- `(("python-pyasn1" ,python-pyasn1)
- ("python-setuptools" ,python-setuptools)))
+ `(("python-pyasn1" ,python-pyasn1)))
(synopsis "Pure-Python RSA implementation")
(description "Python-RSA is a pure-Python RSA implementation. It supports
encryption and decryption, signing and verifying signatures, and key
@@ -7662,8 +7601,7 @@ Pytest but stripped of Pytest specific details.")
;; pytest breaks other packages.
'(#:tests? #f))
(inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-pluggy" ,python-pluggy)
+ `(("python-pluggy" ,python-pluggy)
("python-py" ,python-py)
("python-virtualenv" ,python-virtualenv)
("python-pytest" ,python-pytest)))
@@ -7788,8 +7726,7 @@ seamlessly into your existing Python unit testing work
flow.")
(strip-python2-variant python-hypothesis))))
(package (inherit hypothesis)
(native-inputs
- `(("python2-enum34" ,python2-enum34)
- ("python2-setuptools" ,python2-setuptools))))))
+ `(("python2-enum34" ,python2-enum34))))))
(define-public python-pytest-subtesthack
(package
@@ -8010,10 +7947,9 @@ file.")
(build-system python-build-system)
(native-inputs
`(("python-nose" ,python-nose)))
+ ;; Note: setuptools used at runtime for pkg_resources
(propagated-inputs
- `(;; Uses pkg_resources provided by setuptools internally.
- ("python-setuptools" ,python-setuptools)
- ("python-six" ,python-six)))
+ `(("python-six" ,python-six)))
(arguments
'(;; Tests don't pass on Python 3, but work fine on Python 2.
;; (As of 2.0.2, Python 3 support in Paste is presently a bit broken,
@@ -8054,10 +7990,9 @@ follows ideas flowing from WSGI (Web Standard Gateway
Interface).")
(build-system python-build-system)
(native-inputs
`(("python-nose" ,python-nose)))
+ ;; Note: setuptools used at runtime for pkg_resources
(propagated-inputs
- `(;; Uses pkg_resources provided by setuptools internally.
- ("python-setuptools" ,python-setuptools)
- ("python-paste" ,python-paste)
+ `(("python-paste" ,python-paste)
("python-pastedeploy" ,python-pastedeploy)))
(home-page "http://pythonpaste.org/script/";)
(arguments
@@ -8719,8 +8654,7 @@ encoding algorithms to do fuzzy string matching.")
`(;; It supports Python 3, but Python 3 can already do Unicode CSV.
#:python ,python-2))
(native-inputs
- `(("python2-setuptools" ,python2-setuptools)
- ("python2-unittest2" ,python2-unittest2)))
+ `(("python2-unittest2" ,python2-unittest2)))
(home-page "https://github.com/jdunck/python-unicodecsv";)
(synopsis "Unicode CSV module for Python 2")
(description "Unicodecsv is a drop-in replacement for Python 2.7's CSV
@@ -8875,8 +8809,7 @@ CloudFront content delivery network.")
"1pw0kmvc57sjmaxi6c54fqsnihqj6hvhc9y1vaz36axafzqam7bh"))))
(build-system python-build-system)
(native-inputs
- `(("python-nose" ,python-nose)
- ("python-setuptools" ,python-setuptools)))
+ `(("python-nose" ,python-nose)))
(inputs
`(("pkg-config" ,pkg-config)))
(arguments
@@ -9078,8 +9011,7 @@ Python. It generates C++ code and a Makefile."))
`(#:python ,python-2))
(build-system python-build-system)
(native-inputs
- `(("python2-unittest2" ,python2-unittest2)
- ("python2-setuptools" ,python2-setuptools)))
+ `(("python2-unittest2" ,python2-unittest2)))
(home-page "https://github.com/python-rope/rope";)
(synopsis "Refactoring library for Python")
(description "Rope is a refactoring library for Python. It facilitates
@@ -9172,8 +9104,7 @@ multiple processes (imagine multiprocessing, billiard,
futures, celery etc).
(system* "2to3" "--no-diff" "-wn" "sqlparse" "tests"))
(zero? (system* "py.test")))))))
(native-inputs
- `(("python-pytest" ,python-pytest)
- ("python-setuptools" ,python-setuptools)))
+ `(("python-pytest" ,python-pytest)))
(home-page "https://github.com/andialbrecht/sqlparse";)
(synopsis "Non-validating SQL parser")
(description "Sqlparse is a non-validating SQL parser for Python. It
@@ -9230,8 +9161,7 @@ are synchronized with data exchanges on \"channels\".")
(propagated-inputs
`(("python-greenlet" ,python-greenlet)))
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ("python-six" ,python-six)))
+ `(("python-six" ,python-six)))
(inputs
`(("c-ares" ,c-ares)
("libev" ,libev)))
@@ -9340,8 +9270,7 @@ It uses LR parsing and does extensive error checking.")
(("from common") "from nose.tools")))))
(build-system python-build-system)
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ;; For testing
+ `(;; For testing
("python-nose" ,python-nose)))
(home-page "https://bitbucket.org/astanin/python-tabulate";)
(synopsis "Pretty-print tabular data")
@@ -9500,8 +9429,7 @@ objects, patterned after the Mocha library for Ruby.")
"1bz7hkdgpqcjs866y58z8jywpy7al0f4rxdr00bh2l5qddyw245j"))))
(build-system python-build-system)
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ;; For testing
+ `(;; For testing
("python-chai" ,python-chai)
("python-simplejson" ,python-simplejson)))
(propagated-inputs
@@ -9572,8 +9500,7 @@ Wikipedia code samples at
"1k2dcl6mqpn5bljyl6w42rqyd9mb3y9kh2mg7m2x3kfjwvg0rpva"))))
(build-system python-build-system)
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ;; For testing
+ `(;; For testing
("python-mock" ,python-mock)
("python-pytest" ,python-pytest)))
(propagated-inputs
@@ -9698,8 +9625,7 @@ parsing UK postcodes.")
"0vs0dkmg0dlaxf8w6q2i3k0i03gmp56ablldv7ci9x3nbadkn71g"))))
(build-system python-build-system)
(native-inputs
- `(("python-setuptools" ,python-setuptools)
- ;; For testing
+ `(;; For testing
("python-email-validator" ,python-email-validator)
("python-mock" ,python-mock)
("python-ukpostcodeparser" ,python-ukpostcodeparser)))
@@ -9882,8 +9808,7 @@ characters, mouse support, and auto suggestions.")
`(("python-docopt" ,python-docopt)
("python-jedi" ,python-jedi)
("python-prompt-toolkit" ,python-prompt-toolkit)
- ("python-pygments" ,python-pygments)
- ("python-setuptools" ,python-setuptools)))
+ ("python-pygments" ,python-pygments)))
(home-page "https://github.com/jonathanslenders/ptpython";)
(synopsis "Python Read-Eval-Print-Loop with nice IDE-like features")
(description
diff --git a/gnu/packages/rdf.scm b/gnu/packages/rdf.scm
index d0a362c..1a8d133 100644
--- a/gnu/packages/rdf.scm
+++ b/gnu/packages/rdf.scm
@@ -318,8 +318,7 @@ ideal (e.g. in LV2 implementations or embedded
applications).")
(inputs
`(("python-html5lib" ,python-html5lib)
("python-isodate" ,python-isodate)
- ("python-pyparsing" ,python-pyparsing)
- ("python-setuptools" ,python-setuptools)))
+ ("python-pyparsing" ,python-pyparsing)))
(home-page "https://github.com/RDFLib/rdflib";)
(synopsis
"Python RDF library")
diff --git a/gnu/packages/terminals.scm b/gnu/packages/terminals.scm
index 948906a..ac8161d 100644
--- a/gnu/packages/terminals.scm
+++ b/gnu/packages/terminals.scm
@@ -159,8 +159,7 @@ insert mode and command mode where keybindings have
different functions.")
(("'tput'")
(string-append "'" ncurses "/bin/tput'"))))
#t)))))
- (inputs `(("ncurses" ,ncurses)
- ("python-setuptools" ,python-setuptools)))
+ (inputs `(("ncurses" ,ncurses)))
(home-page "https://asciinema.org";)
(synopsis "Terminal session recorder")
(description
diff --git a/gnu/packages/version-control.scm b/gnu/packages/version-control.scm
index 9008d9f..aecaf0b 100644
--- a/gnu/packages/version-control.scm
+++ b/gnu/packages/version-control.scm
@@ -1156,8 +1156,7 @@ Mercurial, Bazaar, Darcs, CVS, Fossil, and Veracity.")
(build-system python-build-system)
(arguments `(#:python ,python-2))
(native-inputs
- `(("python2-setuptools" ,python2-setuptools)
- ;; for the tests
+ `(;; for the tests
("python2-six" ,python2-six)))
(propagated-inputs
`(("python2-dateutil" ,python2-dateutil-2)
diff --git a/gnu/packages/xdisorg.scm b/gnu/packages/xdisorg.scm
index 323ff11..a3f5fce 100644
--- a/gnu/packages/xdisorg.scm
+++ b/gnu/packages/xdisorg.scm
@@ -91,8 +91,7 @@
(inputs `(("pygtk" ,python2-pygtk)
("xrandr" ,xrandr)))
(native-inputs `(("gettext" ,gnu-gettext)
- ("python-docutils" ,python2-docutils)
- ("python-setuptools" ,python2-setuptools)))
+ ("python-docutils" ,python2-docutils)))
(home-page "https://christian.amsuess.com/tools/arandr/";)
(synopsis "Another RandR graphical user interface")
;; TRANSLATORS: "X11 resize-and-rotate" should not be translated.
- 31/57: gnu: python-hdf5: Correct inputs., (continued)
- 31/57: gnu: python-hdf5: Correct inputs., Hartmut Goebel, 2016/10/13
- 13/57: gnu: Remove python-setuptools and python2-setuptools from inputs (part 4a), Hartmut Goebel, 2016/10/13
- 45/57: gnu: python-scipy: Fix build., Hartmut Goebel, 2016/10/13
- 27/57: gnu: Ensure python-cython is a native-input., Hartmut Goebel, 2016/10/13
- 20/57: gnu: Fix inputs in python.scm, part 1: inputs -> propagated-inputs., Hartmut Goebel, 2016/10/13
- 53/57: gnu: python-pytest-xdist: Remove needless input python-apipkg., Hartmut Goebel, 2016/10/13
- 52/57: gnu: python-subunit, python-testrepository: Fix inputs, Hartmut Goebel, 2016/10/13
- 41/57: gnu: python2-pysnptools: Correct inputs., Hartmut Goebel, 2016/10/13
- 57/57: Add a series of FIXME and TODO comments., Hartmut Goebel, 2016/10/13
- 55/57: gnu: python-testscenarios: remove needless input "mimetools"., Hartmut Goebel, 2016/10/13
- 11/57: gnu: Remove python-setuptools and python2-setuptools from inputs (part 2),
Hartmut Goebel <=
- 01/57: gnu: ensure pip and setuptools are installed even for Python 2., Hartmut Goebel, 2016/10/13
- 15/57: gnu: Remove needless inputs python-pip and python2-pip., Hartmut Goebel, 2016/10/13
- 30/57: gnu: python-h5py: Remove needless "python2-variant" property., Hartmut Goebel, 2016/10/13
- 34/57: gnu: python-testrepositoryfixture: Correct inputs., Hartmut Goebel, 2016/10/13
- 07/57: guix: Add lint-checker for packages which should be no inputs at all., Hartmut Goebel, 2016/10/13
- 21/57: gnu: Fix inputs in python.scm, part 2: inputs -> native-inputs., Hartmut Goebel, 2016/10/13
- 02/57: guix: build all Python packages with --single-version-externally-managed., Hartmut Goebel, 2016/10/13
- 33/57: gnu: python-fixture: Enable tests., Hartmut Goebel, 2016/10/13
- 32/57: gnu: python-fixture: Correct inputs., Hartmut Goebel, 2016/10/13
- 36/57: gnu: python-singledispatch: correct inputs., Hartmut Goebel, 2016/10/13