grub-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v5 1/1] plainmount: Support plain encryption mode


From: Maxim Fomin
Subject: [PATCH v5 1/1] plainmount: Support plain encryption mode
Date: Sat, 16 Jul 2022 18:58:39 +0000

>From 06219fde309f1f87b9d52a70a7e992eaeb168449 Mon Sep 17 00:00:00 2001
From: Maxim Fomin <maxim@fomin.one>
Date: Sat, 16 Jul 2022 19:52:13 +0100
Subject: [PATCH v5 1/1] plainmount: Support plain encryption mode

This patch adds support for plain encryption mode (plain dm-crypt) via
new module/command named 'plainmount'.
---
 docs/grub.texi              |  82 +++++++
 grub-core/Makefile.core.def |   5 +
 grub-core/disk/plainmount.c | 429 ++++++++++++++++++++++++++++++++++++
 3 files changed, 516 insertions(+)
 create mode 100644 grub-core/disk/plainmount.c

diff --git a/docs/grub.texi b/docs/grub.texi
index af119dea3..b5ca222ac 100644
--- a/docs/grub.texi
+++ b/docs/grub.texi
@@ -4265,6 +4265,7 @@ you forget a command, you can run the command 
@command{help}
 * parttool::                    Modify partition table entries
 * password::                    Set a clear-text password
 * password_pbkdf2::             Set a hashed password
+* plainmount::                  Open device encrypted in plain mode.
 * play::                        Play a tune
 * probe::                       Retrieve device info
 * rdmsr::                       Read values from model-specific registers
@@ -4552,6 +4553,14 @@ function is supported, as Argon2 is not yet supported.

 Also, note that, unlike filesystem UUIDs, UUIDs for encrypted devices must be
 specified without dash separators.
+
+Successfully decrypted disks are named as (cryptoX) and have increasing 
numeration
+suffix for each new decrypted disk. If the encrypted disk hosts some higher 
level
+of abstraction (like LVM2 or MDRAID) it will be created under a separate device
+namespace in addition to the cryptodisk namespace.
+
+Support for plain encryption mode (plain dm-crypt) is provided via separate
+@command{plainmount} command.
 @end deffn

 @node cutmem
@@ -5060,6 +5069,79 @@ to generate password hashes.  @xref{Security}.
 @end deffn


+@node plainmount
+@subsection plainmount
+
+@deffn Command plainmount device @option{-c} cipher @option{-s} key size 
[@option{-h} hash]
+[@option{-S} sector size] [@option{-p} password] [@option{-u} uuid]
+[[@option{-d} keyfile] [@option{-O} keyfile offset]]
+
+
+Setup access to the encrypted device in plain mode. The device argument can 
point
+to a disk, partition or to a loopback file. Offset of the encrypted data at the
+device is specified in terms of 512 byte sectors with the blocklist syntax and
+loopback file.
+Example:
+
+@example
+loopback node (hd0,gpt1)2048+
+plainmount node
+@end example
+
+specifies encrypted data at offset 1MiB. The @command{plainmount} plainmount 
command
+can be used to open LUKS encrypted volume if its master key and parameters 
(key size,
+cipher, offset, etc) are known.
+
+Password can be specified in two ways: as a password data from a keyfile or as 
a secret
+passphrase. The keyfile parameter @option{-d} specifies path to the keyfile 
containing
+password data and has higher priority than the other password method. 
Specified password
+data in this mode is not hashed and is used directly as a cipher key. The 
option
+@option{-O} specifies offset in terms of bytes of the password data from the 
start of the
+keyfile. This option has no effect without the option @option{-d}. Offset of 
password data
+in the keyfile can be specified directly with option @option{-d} and using 
GRUB blocklist
+syntax. For example,
+
+@example
+plainmount -s 512 -d (hd0,gpt1)2048+
+plainmount -s 512 -d (hd0,gpt1) -O 1048576
+@end example
+
+both commands specify password data from the keyfile at the offset at 1MiB and 
64 byte
+(512 bits) long.
+
+If no keyfile is specified then the password supplied with the option 
@option{-p} is used
+or the password is requested interactively from the console. In both cases 
provided password
+is hashed with the algorithm specified by the option @option{-h}. This option 
is mandatory
+if no keyfile is specified, but it can be set to 'plain' which means that no 
hashing is done
+and such password is used directly as a key.
+
+Cipher @option{-c} and keysize @option{-s} options specify the cipher 
algorithm and the
+key size respectively and are mandatory options (apply to all methods to 
specify the
+password). Cipher must be specified with the mode (for example, 
'aes-xts-plain64'). Key size
+must not exceed 128 bytes and must be specified in bits.
+
+The optional parameter @option{-S} specifies encrypted device sector size. It 
must be
+at least 512 bytes long (default value) and a power of 2. @footnote{Current 
implementation
+of cryptsetup supports only 512/1024/2048/4096 byte sectors}. Disk sector size 
is
+configured when creating the encrypted volume. Attempting to decrypt such 
volume with
+different sector size than it was created with will not result in an error, 
but will
+decrypt to random bytes and thus prevent accessing the volume (in some cases 
filesystem
+driver can detect the filesystem presense, but nevertheless will refuse to 
mount it).
+
+By default new cryptodisk node will have uuid 
'109fea84-a6b7-34a8-4bd1-1c506305a401'
+where last digits are incremented for each subsequently created node up to 
2^10 nodes.
+Custom uuid can be specified with the option @option{-u}. Decrypted disks have 
the
+same naming rules as those decrypted by @command{cryptomount}.
+
+All encryption arguments (cipher, hash, key size, disk offset and disk sector
+size) must match the parameters used to create the volume. If any of them does 
not
+match the actual arguments used during the initial encryption, plainmount will 
create
+virtual device with the garbage data and GRUB will report unknown filesystem 
for such
+device. Writing data to such virtual device will result in the data loss if the
+underlying partition contained desired data.
+@end deffn
+
+
 @node play
 @subsection play

diff --git a/grub-core/Makefile.core.def b/grub-core/Makefile.core.def
index 715994872..3910b7670 100644
--- a/grub-core/Makefile.core.def
+++ b/grub-core/Makefile.core.def
@@ -1174,6 +1174,11 @@ module = {
   common = disk/cryptodisk.c;
 };

+module = {
+  name = plainmount;
+  common = disk/plainmount.c;
+};
+
 module = {
   name = json;
   common = lib/json/json.c;
diff --git a/grub-core/disk/plainmount.c b/grub-core/disk/plainmount.c
new file mode 100644
index 000000000..154f79a4a
--- /dev/null
+++ b/grub-core/disk/plainmount.c
@@ -0,0 +1,429 @@
+/*
+ *  GRUB  --  GRand Unified Bootloader
+ *  Copyright (C) 2003,2007,2010,2011,2019  Free Software Foundation, Inc.
+ *
+ *  GRUB is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  GRUB is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include <grub/cryptodisk.h>
+#include <grub/dl.h>
+#include <grub/err.h>
+#include <grub/extcmd.h>
+#include <grub/partition.h>
+#include <grub/file.h>
+
+
+GRUB_MOD_LICENSE ("GPLv3+");
+#define BITS_PER_BYTE                  8
+#define PLAINMOUNT_DEFAULT_SECTOR_SIZE 512
+#define PLAINMOUNT_DEFAULT_UUID        "109fea84-a6b7-34a8-4bd1-1c506305a400"
+
+
+enum PLAINMOUNT_OPTION
+  {
+    OPTION_HASH,
+    OPTION_CIPHER,
+    OPTION_KEY_SIZE,
+    OPTION_SECTOR_SIZE,
+    OPTION_PASSWORD,
+    OPTION_KEYFILE,
+    OPTION_KEYFILE_OFFSET,
+    OPTION_UUID
+  };
+
+
+static const struct grub_arg_option options[] =
+  {
+    /* TRANSLATORS: It's still restricted to this module only.  */
+    {"hash", 'h', 0, N_("Password hash"), 0, ARG_TYPE_STRING},
+    {"cipher", 'c', 0, N_("Password cipher"), 0, ARG_TYPE_STRING},
+    {"key-size", 's', 0, N_("Key size (in bits)"), 0, ARG_TYPE_INT},
+    {"sector-size", 'S', 0, N_("Device sector size"), 0, ARG_TYPE_INT},
+    {"password", 'p', 0, N_("Password (key)"), 0, ARG_TYPE_STRING},
+    {"keyfile", 'd', 0, N_("Keyfile path"), 0, ARG_TYPE_STRING},
+    {"keyfile-offset", 'O', 0, N_("Keyfile offset"), 0, ARG_TYPE_INT},
+    {"uuid", 'u', 0, N_("Set device UUID"), 0, ARG_TYPE_STRING},
+    {0, 0, 0, 0, 0, 0}
+  };
+
+
+/* Cryptodisk setkey() function wrapper */
+static grub_err_t
+plainmount_setkey (grub_cryptodisk_t dev, grub_uint8_t *key,
+                   grub_size_t size)
+{
+  gcry_err_code_t code = grub_cryptodisk_setkey (dev, key, size);
+  if (code != GPG_ERR_NO_ERROR)
+    {
+      grub_dprintf ("plainmount", "password crypto status is %d\n", code);
+      return grub_error (GRUB_ERR_BAD_ARGUMENT, N_("cannot set specified 
key"));
+    }
+  return GRUB_ERR_NONE;
+}
+
+
+/* Configure cryptodisk uuid */
+static void plainmount_set_uuid (grub_cryptodisk_t dev, const char *user_uuid)
+{
+  grub_size_t pos = 0;
+
+  /* Size of user_uuid is checked in main func */
+  if (user_uuid != NULL)
+      grub_memcpy (dev->uuid, user_uuid, grub_strlen (user_uuid));
+  else
+    {
+      /*
+       * Set default UUID. Last digits start from 1 and are incremented for
+       * each new plainmount device by snprintf().
+       */
+      grub_snprintf (dev->uuid, sizeof (dev->uuid)-1, "%36lx", dev->id+1);
+      while (dev->uuid[pos++] == ' ');
+      grub_memcpy (dev->uuid, PLAINMOUNT_DEFAULT_UUID, pos-1);
+    }
+  COMPILE_TIME_ASSERT (sizeof (dev->uuid) >= sizeof (PLAINMOUNT_DEFAULT_UUID));
+}
+
+
+/* Configure cryptodevice sector size (-S option) */
+static grub_err_t
+plainmount_configure_sectors (grub_cryptodisk_t dev, grub_disk_t disk,
+                              grub_size_t sector_size)
+{
+  dev->total_sectors = grub_disk_native_sectors (disk);
+  if (dev->total_sectors == GRUB_DISK_SIZE_UNKNOWN)
+    return grub_error (GRUB_ERR_BAD_DEVICE, N_("cannot determine disk %s 
size"),
+                       disk->name);
+
+  /* Convert size to sectors */
+  dev->log_sector_size = grub_log2ull (sector_size);
+  dev->total_sectors = grub_convert_sector (dev->total_sectors,
+                                           GRUB_DISK_SECTOR_BITS,
+                                            dev->log_sector_size);
+  if (dev->total_sectors == 0)
+    return grub_error (GRUB_ERR_BAD_DEVICE,
+                      N_("cannot set specified sector size on disk %s"),
+                      disk->name);
+
+  grub_dprintf ("plainmount", "log_sector_size=%d, total_sectors=%"
+               PRIuGRUB_SIZE"\n", dev->log_sector_size, dev->total_sectors);
+  return GRUB_ERR_NONE;
+}
+
+
+/* Hashes a password into a key and stores it with cipher. */
+static grub_err_t
+plainmount_configure_password (grub_cryptodisk_t dev, grub_disk_t disk,
+                               const char *hash, grub_uint8_t *key_data,
+                              grub_size_t key_size)
+{
+  const gcry_md_spec_t *gcry_hash;
+  grub_uint8_t derived_hash[GRUB_CRYPTODISK_MAX_KEYLEN * 2], *dh = 
derived_hash;
+  char *p;
+  unsigned int round, i;
+  unsigned int len, size;
+
+  /* Option -p was not set */
+  if (key_data[0] == '\0')
+  {
+    char *part = grub_partition_get_name (disk->partition);
+    grub_printf_ (N_("Enter passphrase for %s%s%s: "), disk->name,
+                  disk->partition != NULL ? "," : "",
+                  part != NULL ? part : N_("UNKNOWN"));
+    grub_free (part);
+
+    if (!grub_password_get ((char*)key_data, GRUB_CRYPTODISK_MAX_PASSPHRASE-1))
+        grub_error (GRUB_ERR_BAD_ARGUMENT, N_("error reading password"));
+  }
+
+  /* Support none (plain) hash */
+  if (grub_strcmp (hash, "plain") == 0)
+    {
+      dev->hash = NULL;
+      return plainmount_setkey (dev, key_data, key_size);
+    }
+
+  /* Check hash */
+  gcry_hash = grub_crypto_lookup_md_by_name (hash);
+  if (!gcry_hash)
+    return grub_error (GRUB_ERR_FILE_NOT_FOUND,
+                       N_("couldn't load %s hash"),
+                       hash);
+
+  if (gcry_hash->mdlen > GRUB_CRYPTODISK_MAX_KEYLEN)
+    return grub_error (GRUB_ERR_BAD_ARGUMENT,
+                       N_("hash length %"PRIuGRUB_SIZE" exceeds maximum %d 
bits"),
+                       gcry_hash->mdlen * BITS_PER_BYTE,
+                       GRUB_CRYPTODISK_MAX_KEYLEN * BITS_PER_BYTE);
+
+  dev->hash = gcry_hash;
+  len = dev->hash->mdlen;
+  p = grub_malloc (key_size + 2 + (key_size / len));
+  if (p == NULL)
+    return GRUB_ERR_OUT_OF_MEMORY;
+
+  /*
+   * Hash password. Adapted from cryptsetup.
+   * https://gitlab.com/cryptsetup/cryptsetup/-/blob/main/lib/crypt_plain.c
+   */
+  for (round = 0, size = key_size; size; round++, dh += len, size -= len)
+    {
+      for (i = 0; i < round; i++)
+       p[i] = 'A';
+
+      grub_strcpy (p + i, (char*) key_data);
+
+      if (len > size)
+       len = size;
+
+      grub_crypto_hash (dev->hash, dh, p, grub_strlen (p));
+    }
+  grub_free (p);
+  return GRUB_ERR_NONE;
+}
+
+
+/* Read key material from keyfile */
+static grub_err_t
+plainmount_configure_keyfile (char *keyfile, grub_uint8_t *key_data,
+                              grub_size_t key_size, grub_size_t keyfile_offset)
+{
+  grub_file_t g_keyfile = grub_file_open (keyfile, GRUB_FILE_TYPE_NONE);
+  if (g_keyfile == NULL)
+    return grub_error (GRUB_ERR_FILE_NOT_FOUND, N_("cannot open keyfile %s"),
+                       keyfile);
+
+  if (grub_file_seek (g_keyfile, keyfile_offset) == (grub_off_t)-1)
+    return grub_error (GRUB_ERR_FILE_READ_ERROR,
+                       N_("cannot seek keyfile at offset %"PRIuGRUB_SIZE),
+                      keyfile_offset);
+
+  if (key_size > (g_keyfile->size - keyfile_offset))
+    return grub_error (GRUB_ERR_BAD_ARGUMENT, N_("Specified key size (%"
+                       PRIuGRUB_SIZE") is too small for keyfile size (%"
+                       PRIuGRUB_SIZE") and offset (%"PRIuGRUB_SIZE")"),
+                       key_size, g_keyfile->size, keyfile_offset);
+
+  if (grub_file_read (g_keyfile, key_data, key_size) != (grub_ssize_t) 
key_size)
+    return grub_error (GRUB_ERR_FILE_READ_ERROR, N_("error reading key file"));
+  return GRUB_ERR_NONE;
+}
+
+
+/* Plainmount command entry point */
+static grub_err_t
+grub_cmd_plainmount (grub_extcmd_context_t ctxt, int argc, char **args)
+{
+  struct grub_arg_list *state = ctxt->state;
+  grub_cryptodisk_t dev = NULL;
+  grub_disk_t disk = NULL;
+  char *diskname, *disklast = NULL, *cipher, *mode, *hash, *keyfile, *uuid;
+  grub_size_t len, key_size, sector_size, keyfile_offset = 0;
+  grub_err_t err;
+  const char *p;
+  grub_uint8_t *key_data;
+
+  if (argc < 1)
+    return grub_error (GRUB_ERR_BAD_ARGUMENT, N_("device name required"));
+
+  /* Check whether required arguments are specified */
+  if (!state[OPTION_CIPHER].set || !state[OPTION_KEY_SIZE].set)
+      return grub_error (GRUB_ERR_BAD_ARGUMENT,
+                        "cipher and key size must be set");
+  if (!state[OPTION_HASH].set && !state[OPTION_KEYFILE].set)
+      return grub_error (GRUB_ERR_BAD_ARGUMENT, "hash algorithm must be set");
+
+  /* Check cipher mode */
+  if (!grub_strchr (state[OPTION_CIPHER].arg,'-'))
+    return grub_error (GRUB_ERR_BAD_ARGUMENT,
+                       N_("invalid cipher mode, must be of format 
cipher-mode"));
+
+  /* Check password size */
+  if (state[OPTION_PASSWORD].set && grub_strlen (state[OPTION_PASSWORD].arg) >
+                                                GRUB_CRYPTODISK_MAX_PASSPHRASE)
+    return grub_error (GRUB_ERR_BAD_ARGUMENT,
+                       N_("password exceeds maximium size"));
+
+  /* Check uuid length */
+  if (state[OPTION_UUID].set && grub_strlen (state[OPTION_UUID].arg) >
+                                sizeof (PLAINMOUNT_DEFAULT_UUID))
+    return grub_error (GRUB_ERR_BAD_ARGUMENT,
+                       N_("specified UUID exceeds maximum size"));
+
+  /* Parse plainmount arguments */
+  grub_errno = GRUB_ERR_NONE;
+  keyfile_offset = state[OPTION_KEYFILE_OFFSET].set ?
+                   grub_strtoull (state[OPTION_KEYFILE_OFFSET].arg, &p, 0) : 0;
+  if (state[OPTION_KEYFILE_OFFSET].set &&
+     (state[OPTION_KEYFILE_OFFSET].arg[0] == '\0' || *p != '\0' ||
+      grub_errno != GRUB_ERR_NONE))
+    return grub_error (GRUB_ERR_BAD_ARGUMENT, N_("unrecognized keyfile 
offset"));
+
+  sector_size = state[OPTION_SECTOR_SIZE].set ?
+               grub_strtoull (state[OPTION_SECTOR_SIZE].arg, &p, 0) :
+                PLAINMOUNT_DEFAULT_SECTOR_SIZE;
+  if (state[OPTION_SECTOR_SIZE].set && (state[OPTION_SECTOR_SIZE].arg[0] == 
'\0' ||
+                                       *p != '\0' || grub_errno != 
GRUB_ERR_NONE))
+    return grub_error (GRUB_ERR_BAD_ARGUMENT, N_("unrecognized sector size"));
+
+  /* Check key size */
+  key_size = grub_strtoull (state[OPTION_KEY_SIZE].arg, &p, 0);
+  if (state[OPTION_KEY_SIZE].arg[0] == '\0' || *p != '\0' ||
+      grub_errno != GRUB_ERR_NONE)
+    return grub_error (GRUB_ERR_BAD_ARGUMENT, N_("unrecognized key size"));
+  if (key_size % BITS_PER_BYTE != 0)
+    return grub_error (GRUB_ERR_BAD_ARGUMENT,
+                       N_("key size is not multiple of bits"));
+  key_size = key_size / BITS_PER_BYTE;
+  if (key_size > GRUB_CRYPTODISK_MAX_KEYLEN)
+    return grub_error (GRUB_ERR_BAD_ARGUMENT,
+                       N_("key size %"PRIuGRUB_SIZE" exceeds maximum %d bits"),
+                       key_size * BITS_PER_BYTE,
+                      GRUB_CRYPTODISK_MAX_KEYLEN * BITS_PER_BYTE);
+
+  /* Check disk sector size */
+  if (sector_size < GRUB_DISK_SECTOR_SIZE)
+    return grub_error (GRUB_ERR_BAD_ARGUMENT,
+                      N_("sector size -S must be at least %d"),
+                      GRUB_DISK_SECTOR_SIZE);
+  if ((sector_size & (sector_size - 1)) != 0)
+    return grub_error (GRUB_ERR_BAD_ARGUMENT, N_("sector size -S %"
+                       PRIuGRUB_SIZE" is not power of 2"), sector_size);
+
+  /* Allocate all stuff here */
+  hash =  state[OPTION_HASH].set ? grub_strdup (state[OPTION_HASH].arg) : NULL;
+  cipher = grub_strdup (state[OPTION_CIPHER].arg);
+  keyfile = state[OPTION_KEYFILE].set ?
+            grub_strdup (state[OPTION_KEYFILE].arg) : NULL;
+  dev = grub_zalloc (sizeof *dev);
+  key_data = grub_zalloc (GRUB_CRYPTODISK_MAX_PASSPHRASE);
+  uuid = state[OPTION_UUID].set ? grub_strdup (state[OPTION_UUID].arg) : NULL;
+  if ((!hash && state[OPTION_HASH].set) || !cipher ||
+      (!keyfile && state[OPTION_KEYFILE].set) || !dev || !key_data ||
+      (!uuid && state[OPTION_UUID].set))
+    {
+      err = grub_error (GRUB_ERR_OUT_OF_MEMORY, "out of memory");
+      goto exit;
+    }
+
+  /* Copy user password from -p option */
+  if (state[OPTION_PASSWORD].set)
+    grub_memcpy (key_data, state[OPTION_PASSWORD].arg,
+                grub_strlen (state[OPTION_PASSWORD].arg));
+
+  /* Copy user UUID from -u option */
+  if (state[OPTION_UUID].set)
+    grub_memcpy (uuid, state[OPTION_UUID].arg,
+                 grub_strlen (state[OPTION_UUID].arg));
+
+  /* Set cipher mode (tested above) */
+  mode = grub_strchr (cipher,'-');
+  *mode++ = '\0';
+
+  /* Check cipher */
+  if (grub_cryptodisk_setcipher (dev, cipher, mode) != GRUB_ERR_NONE)
+    {
+      err = grub_error (GRUB_ERR_BAD_ARGUMENT, N_("invalid cipher %s"), 
cipher);
+      goto exit;
+    }
+
+  /* Open SOURCE disk */
+  diskname = args[0];
+  len = grub_strlen (diskname);
+  if (len && diskname[0] == '(' && diskname[len - 1] == ')')
+    {
+      disklast = &diskname[len - 1];
+      *disklast = '\0';
+      diskname++;
+    }
+  disk = grub_disk_open (diskname);
+  if (disk == NULL)
+    {
+      if (disklast)
+        *disklast = ')';
+      err = grub_error (GRUB_ERR_BAD_ARGUMENT, N_("cannot open disk %s"),
+                        diskname);
+      goto exit;
+    }
+
+  /* Warn if hash and keyfile are both provided */
+  if (keyfile != NULL && state[OPTION_HASH].arg)
+    grub_printf_ (N_("warning: hash is ignored if keyfile is specified\n"));
+
+  /* Warn if -p option is specified with keyfile */
+  if (state[OPTION_PASSWORD].set && state[OPTION_KEYFILE].set)
+    grub_printf_ (N_("warning: password specified with -p option "
+                     "is ignored if keyfile is provided\n"));
+
+  /* Warn of -O is provided without keyfile */
+  if (state[OPTION_KEYFILE_OFFSET].set && !state[OPTION_KEYFILE].set)
+    grub_printf_ (N_("warning: keyfile offset option -O "
+                     "specified without keyfile option -d\n"));
+
+  grub_dprintf ("plainmount", "parameters: cipher=%s, hash=%s, key_size=%"
+               PRIuGRUB_SIZE", keyfile=%s, keyfile offset=%"PRIuGRUB_SIZE"\n",
+                cipher, hash, key_size, keyfile, keyfile_offset);
+
+  err = plainmount_configure_sectors (dev, disk, sector_size);
+  if (err != GRUB_ERR_NONE)
+    goto exit;
+
+  /* Configure keyfile or password */
+  if (keyfile != NULL)
+    err = plainmount_configure_keyfile (keyfile, key_data, key_size,
+                                       keyfile_offset);
+  else
+    err = plainmount_configure_password (dev, disk, hash, key_data, key_size);
+  if (err != GRUB_ERR_NONE)
+    goto exit;
+
+  err = plainmount_setkey (dev, key_data, key_size);
+  if (err != GRUB_ERR_NONE)
+    goto exit;
+  err = grub_cryptodisk_insert (dev, diskname, disk);
+  if (err != GRUB_ERR_NONE)
+    goto exit;
+
+  dev->modname = "plainmount";
+  dev->source_disk = disk;
+  plainmount_set_uuid (dev, uuid);
+
+exit:
+  grub_free (hash);
+  grub_free (cipher);
+  grub_free (keyfile);
+  grub_free (key_data);
+  grub_free (uuid);
+  if (err != GRUB_ERR_NONE && disk)
+    grub_disk_close (disk);
+  if (err != GRUB_ERR_NONE && dev)
+    grub_free (dev);
+  return err;
+}
+
+static grub_extcmd_t cmd;
+GRUB_MOD_INIT (plainmount)
+{
+  cmd = grub_register_extcmd ("plainmount", grub_cmd_plainmount, 0,
+                             N_("-c cipher -s key-size [-h hash] [-S 
sector-size]"
+                             " [-o offset] [-p password] [-u uuid] "
+                             " [[-d keyfile] [-O keyfile offset]] <SOURCE>"),
+                             N_("Open partition encrypted in plain mode."),
+                             options);
+}
+
+GRUB_MOD_FINI (plainmount)
+{
+  grub_unregister_extcmd (cmd);
+}
--
2.37.1





reply via email to

[Prev in Thread] Current Thread [Next in Thread]