grub-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v2 4/8] tests: Fail immediately when grub-shell fails and do not


From: Glenn Washburn
Subject: [PATCH v2 4/8] tests: Fail immediately when grub-shell fails and do not occlude the error code
Date: Wed, 25 Aug 2021 02:03:58 -0500

If grub-shell fails, that means that whatever was being tested was not
actually tested. So fail immediately. Sometimes grub-shell is not the last
command in a pipeline of several commands, and in this case the failed error
code can be hidden by a later failing command or hidden when 'set -e' is not
set and there are subsequent successful commands. When the test script fails
because of a failure in grub-shell, then test script should exit with the
failed exit code of grub-shell.

Signed-off-by: Glenn Washburn <development@efficientek.com>
---
 tests/ahci_test.in             | 6 +++++-
 tests/cdboot_test.in           | 3 ++-
 tests/core_compress_test.in    | 6 ++++--
 tests/ehci_test.in             | 6 +++++-
 tests/fddboot_test.in          | 3 ++-
 tests/grub_cmd_date.in         | 3 ++-
 tests/grub_cmd_test.in         | 1 +
 tests/grub_script_blockarg.in  | 2 +-
 tests/grub_script_expansion.in | 3 ++-
 tests/gzcompress_test.in       | 3 ++-
 tests/hddboot_test.in          | 3 ++-
 tests/lzocompress_test.in      | 3 ++-
 tests/netboot_test.in          | 3 ++-
 tests/ohci_test.in             | 6 +++++-
 tests/partmap_test.in          | 4 ++--
 tests/pata_test.in             | 3 ++-
 tests/test_sha512sum.in        | 1 +
 tests/uhci_test.in             | 6 +++++-
 tests/xzcompress_test.in       | 3 ++-
 19 files changed, 49 insertions(+), 19 deletions(-)

diff --git a/tests/ahci_test.in b/tests/ahci_test.in
index d844fe680..30dc9d31a 100644
--- a/tests/ahci_test.in
+++ b/tests/ahci_test.in
@@ -41,7 +41,11 @@ echo "hello" > "$outfile"
 
 tar cf "$imgfile" "$outfile"
 
-if [ "$(echo "nativedisk; source '(ahci0)/$outfile';" | "${grubshell}" 
--qemu-opts="-drive id=disk,file=$imgfile,if=none -device ahci,id=ahci -device 
ide-hd,drive=disk,bus=ahci.0 " | tail -n 1)" != "Hello World" ]; then
+echo "nativedisk; source '(ahci0)/$outfile';" |
+    "${grubshell}" --qemu-opts="-drive id=disk,file=$imgfile,if=none
+                               -device ahci,id=ahci
+                               -device ide-hd,drive=disk,bus=ahci.0" >$outfile
+if [ "$(cat "$outfile" | tail -n 1)" != "Hello World" ]; then
    rm "$imgfile"
    rm "$outfile"
    exit 1
diff --git a/tests/cdboot_test.in b/tests/cdboot_test.in
index 75acdfedb..7229f79fb 100644
--- a/tests/cdboot_test.in
+++ b/tests/cdboot_test.in
@@ -34,6 +34,7 @@ case "${grub_modinfo_target_cpu}-${grub_modinfo_platform}" in
        exit 0;;
 esac
 
-if [ "$(echo hello | "${grubshell}" --boot=cd)" != "Hello World" ]; then
+v=`echo hello | "${grubshell}" --boot=cd`
+if [ "$v" != "Hello World" ]; then
    exit 1
 fi
diff --git a/tests/core_compress_test.in b/tests/core_compress_test.in
index 9d216ebcf..90dd00607 100644
--- a/tests/core_compress_test.in
+++ b/tests/core_compress_test.in
@@ -27,10 +27,12 @@ case "${grub_modinfo_target_cpu}-${grub_modinfo_platform}" 
in
 esac
 
 
-if [ "$(echo hello | "${grubshell}" --grub-mkimage-extra=--compress=xz)" != 
"Hello World" ]; then
+v=`echo hello | "${grubshell}" --grub-mkimage-extra=--compress=xz`
+if [ "$v" != "Hello World" ]; then
    exit 1
 fi
 
-if [ "$(echo hello | "${grubshell}" --grub-mkimage-extra=--compress=none)" != 
"Hello World" ]; then
+v=`echo hello | "${grubshell}" --grub-mkimage-extra=--compress=none`
+if [ "$v" != "Hello World" ]; then
    exit 1
 fi
diff --git a/tests/ehci_test.in b/tests/ehci_test.in
index b197f8cdc..64bd80070 100644
--- a/tests/ehci_test.in
+++ b/tests/ehci_test.in
@@ -41,7 +41,11 @@ echo "hello" > "$outfile"
 
 tar cf "$imgfile" "$outfile"
 
-if [ "$(echo "nativedisk; source '(usb0)/$outfile';" | "${grubshell}" 
--qemu-opts="-device ich9-usb-ehci1 -drive id=my_usb_disk,file=$imgfile,if=none 
-device usb-storage,drive=my_usb_disk" | tail -n 1)" != "Hello World" ]; then
+echo "nativedisk; source '(usb0)/$outfile';" |
+    "${grubshell}" --qemu-opts="-device ich9-usb-ehci1
+                               -drive id=my_usb_disk,file=$imgfile,if=none
+                               -device usb-storage,drive=my_usb_disk" >$outfile
+if [ "$(cat "$outfile" | tail -n 1)" != "Hello World" ]; then
    rm "$imgfile"
    rm "$outfile"
    exit 1
diff --git a/tests/fddboot_test.in b/tests/fddboot_test.in
index 2d7dfc889..1bbe60ee5 100644
--- a/tests/fddboot_test.in
+++ b/tests/fddboot_test.in
@@ -46,6 +46,7 @@ case "${grub_modinfo_target_cpu}-${grub_modinfo_platform}" in
        exit 0;;
 esac
 
-if [ "$(echo hello | "${grubshell}" --boot=fd --mkrescue-arg="--compress=xz 
--fonts= --locales= --themes= -no-pad")" != "Hello World" ]; then
+v=`echo hello | "${grubshell}" --boot=fd --mkrescue-arg="--compress=xz 
--fonts= --locales= --themes= -no-pad"`
+if [ "$v" != "Hello World" ]; then
    exit 1
 fi
diff --git a/tests/grub_cmd_date.in b/tests/grub_cmd_date.in
index f7c9ca004..f9156691e 100644
--- a/tests/grub_cmd_date.in
+++ b/tests/grub_cmd_date.in
@@ -9,7 +9,8 @@ if [ "${grub_modinfo_target_cpu}-${grub_modinfo_platform}" = 
sparc64-ieee1275 ];
 fi
 
 pdt="$(date -u +%s)"
-dt=`echo date | @builddir@/grub-shell | sed 's, [A-Z][a-z]*$,,'`
+dt=`echo date | @builddir@/grub-shell`
+dt=`echo "$dt" | sed 's, [A-Z][a-z]*$,,'`
 dtg="$(date -u -d "$dt" +%s)"
 ndt="$(date -u +%s)"
 
diff --git a/tests/grub_cmd_test.in b/tests/grub_cmd_test.in
index 3399eb292..dac6f7d6a 100644
--- a/tests/grub_cmd_test.in
+++ b/tests/grub_cmd_test.in
@@ -1,4 +1,5 @@
 #! @BUILD_SHEBANG@
+set -e
 
 # create a randome file
 empty="`mktemp "${TMPDIR:-/tmp}/tmp.XXXXXXXXXX"`" || exit 1
diff --git a/tests/grub_script_blockarg.in b/tests/grub_script_blockarg.in
index 6ea9b8c3d..6152cc141 100644
--- a/tests/grub_script_blockarg.in
+++ b/tests/grub_script_blockarg.in
@@ -1,4 +1,4 @@
-#! @BUILD_SHEBANG@
+#! @BUILD_SHEBANG@ -e
 
 # Run GRUB script in a Qemu instance
 # Copyright (C) 2010  Free Software Foundation, Inc.
diff --git a/tests/grub_script_expansion.in b/tests/grub_script_expansion.in
index 9d0dcdd29..98d5a9068 100644
--- a/tests/grub_script_expansion.in
+++ b/tests/grub_script_expansion.in
@@ -17,7 +17,8 @@ set -e
 # You should have received a copy of the GNU General Public License
 # along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
 
-disks=`echo ls | @builddir@/grub-shell| grep -av '^Network protocols:$'| grep 
-av '^tftp http $'`
+disks=`echo ls | @builddir@/grub-shell`
+disks=`echo "$disks"| grep -av '^Network protocols:$'| grep -av '^tftp http $'`
 other=`echo insmod regexp\; echo \* | @builddir@/grub-shell`
 for d in $disks; do
     if echo "$d" |grep ',' >/dev/null; then
diff --git a/tests/gzcompress_test.in b/tests/gzcompress_test.in
index 42c8fe7c4..572b2a1a5 100644
--- a/tests/gzcompress_test.in
+++ b/tests/gzcompress_test.in
@@ -24,6 +24,7 @@ if ! which gzip >/dev/null 2>&1; then
    exit 77
 fi
 
-if [ "$(echo hello | "${grubshell}" --mkrescue-arg=--compress=gz)" != "Hello 
World" ]; then
+v=`echo hello | "${grubshell}" --mkrescue-arg=--compress=gz`
+if [ "$v" != "Hello World" ]; then
    exit 1
 fi
diff --git a/tests/hddboot_test.in b/tests/hddboot_test.in
index 6d70847a5..abe3e0ae1 100644
--- a/tests/hddboot_test.in
+++ b/tests/hddboot_test.in
@@ -31,7 +31,8 @@ case "${grub_modinfo_target_cpu}-${grub_modinfo_platform}" in
        exit 0;;
 esac
 
-if [ "$(echo hello | "${grubshell}" --boot=hd)" != "Hello World" ]; then
+v=`echo hello | "${grubshell}" --boot=hd`
+if [ "$v" != "Hello World" ]; then
    exit 1
 fi
 
diff --git a/tests/lzocompress_test.in b/tests/lzocompress_test.in
index 4e5f7e078..8f08a8046 100644
--- a/tests/lzocompress_test.in
+++ b/tests/lzocompress_test.in
@@ -24,6 +24,7 @@ if ! which lzop >/dev/null 2>&1; then
    exit 77
 fi
 
-if [ "$(echo hello | "${grubshell}" --mkrescue-arg=--compress=lzo)" != "Hello 
World" ]; then
+v=`echo hello | "${grubshell}" --mkrescue-arg=--compress=lzo`
+if [ "$v" != "Hello World" ]; then
    exit 1
 fi
diff --git a/tests/netboot_test.in b/tests/netboot_test.in
index 9f71e3d88..6a1d95a22 100644
--- a/tests/netboot_test.in
+++ b/tests/netboot_test.in
@@ -40,6 +40,7 @@ case "${grub_modinfo_target_cpu}-${grub_modinfo_platform}" in
        exit 0;;
 esac
 
-if [ "$(echo hello | "${grubshell}" --boot=net)" != "Hello World" ]; then
+v=`echo hello | "${grubshell}" --boot=net`
+if [ "$v" != "Hello World" ]; then
    exit 1
 fi
diff --git a/tests/ohci_test.in b/tests/ohci_test.in
index 8693f8c47..cc35f67a9 100644
--- a/tests/ohci_test.in
+++ b/tests/ohci_test.in
@@ -41,7 +41,11 @@ echo "hello" > "$outfile"
 
 tar cf "$imgfile" "$outfile"
 
-if [ "$(echo "nativedisk; source '(usb0)/$outfile';" | "${grubshell}" 
--qemu-opts="-device pci-ohci -drive id=my_usb_disk,file=$imgfile,if=none 
-device usb-storage,drive=my_usb_disk" | tail -n 1)" != "Hello World" ]; then
+echo "nativedisk; source '(usb0)/$outfile';" |
+    "${grubshell}" --qemu-opts="-device pci-ohci
+                               -drive id=my_usb_disk,file=$imgfile,if=none
+                               -device usb-storage,drive=my_usb_disk" >$outfile
+if [ "$(cat "$outfile" | tail -n 1)" != "Hello World" ]; then
    rm "$imgfile"
    rm "$outfile"
    exit 1
diff --git a/tests/partmap_test.in b/tests/partmap_test.in
index 7353dc70e..5f18ab51c 100644
--- a/tests/partmap_test.in
+++ b/tests/partmap_test.in
@@ -58,8 +58,8 @@ list_parts () {
     shift
 
     echo ls | "${grubshell}" --disk="${imgfile}" \
-       --modules=$mod | tr -d "\n\r" > "${outfile}"
-    cat "${outfile}"
+       --modules=$mod > "${outfile}"
+    cat "${outfile}" | tr -d "\n\r"
     echo
 }
 
diff --git a/tests/pata_test.in b/tests/pata_test.in
index 4b18fdef3..3d19cecde 100644
--- a/tests/pata_test.in
+++ b/tests/pata_test.in
@@ -45,7 +45,8 @@ echo "hello" > "$outfile"
 
 tar cf "$imgfile" "$outfile"
 
-if [ "$(echo "nativedisk; source '($indisk)/$outfile';" | "${grubshell}" 
--qemu-opts="-$disk $imgfile")" != "Hello World" ]; then
+v=`echo "nativedisk; source '($indisk)/$outfile';" | "${grubshell}" 
--qemu-opts="-$disk $imgfile"`
+if [ "$v" != "Hello World" ]; then
    rm "$imgfile"
    rm "$outfile"
    exit 1
diff --git a/tests/test_sha512sum.in b/tests/test_sha512sum.in
index 027092a8b..d97b7ae2c 100644
--- a/tests/test_sha512sum.in
+++ b/tests/test_sha512sum.in
@@ -1,4 +1,5 @@
 #! @BUILD_SHEBANG@
+set -e
 
 # create a randome file
 file="`mktemp "${TMPDIR:-/tmp}/tmp.XXXXXXXXXX"`" || exit 1
diff --git a/tests/uhci_test.in b/tests/uhci_test.in
index f0eec5032..6aab10ba6 100644
--- a/tests/uhci_test.in
+++ b/tests/uhci_test.in
@@ -41,7 +41,11 @@ echo "hello" > "$outfile"
 
 tar cf "$imgfile" "$outfile"
 
-if [ "$(echo "nativedisk; source '(usb0)/$outfile';" | "${grubshell}" 
--qemu-opts="-device ich9-usb-uhci1 -drive id=my_usb_disk,file=$imgfile,if=none 
-device usb-storage,drive=my_usb_disk" | tail -n 1)" != "Hello World" ]; then
+echo "nativedisk; source '(usb0)/$outfile';" |
+    "${grubshell}" --qemu-opts="-device ich9-usb-uhci1
+                               -drive id=my_usb_disk,file=$imgfile,if=none
+                               -device usb-storage,drive=my_usb_disk" >$outfile
+if [ "$(cat "$outfile" | tail -n 1)" != "Hello World" ]; then
    rm "$imgfile"
    rm "$outfile"
    exit 1
diff --git a/tests/xzcompress_test.in b/tests/xzcompress_test.in
index 03bfb5e95..61acba33b 100644
--- a/tests/xzcompress_test.in
+++ b/tests/xzcompress_test.in
@@ -24,6 +24,7 @@ if ! which xz >/dev/null 2>&1; then
    exit 77
 fi
 
-if [ "$(echo hello | "${grubshell}" --mkrescue-arg=--compress=xz)" != "Hello 
World" ]; then
+v=`echo hello | "${grubshell}" --mkrescue-arg=--compress=xz`
+if [ "$v" != "Hello World" ]; then
    exit 1
 fi
-- 
2.27.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]