[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 3/4] efi: implemented LoadFile2 initr loading protocol for Li
From: |
Leif Lindholm |
Subject: |
Re: [PATCH 3/4] efi: implemented LoadFile2 initr loading protocol for Linux |
Date: |
Fri, 23 Oct 2020 13:32:46 +0100 |
User-agent: |
Mutt/1.10.1 (2018-07-13) |
initrd typo in subject
minor style comments below
On Fri, Oct 23, 2020 at 14:08:24 +0200, Ard Biesheuvel wrote:
> Recent Linux kernels will invoke the LoadFile2 protocol installed on
> a well-known vendor media path to load the initrd if it is exposed by
> the firmware. Using this method is preferred for two reasons:
> - the Linux kernel is in charge of allocating the memory, and so it can
> implement any placement policy it wants (given that these tend to
> change between kernel versions),
> - it is no longer necessary to modify the device tree provided by the
> firmware.
>
> So let's install this protocol when handling the 'initrd' command if
> such a recent kernel was detected (based on the PE/COFF image version),
> and defer loading the initrd contents until the point where the kernel
> invokes the LoadFile2 protocol.
>
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
> ---
> grub-core/loader/arm64/linux.c | 117 +++++++++++++++++++-
> 1 file changed, 116 insertions(+), 1 deletion(-)
>
> diff --git a/grub-core/loader/arm64/linux.c b/grub-core/loader/arm64/linux.c
> index ef3e9f9444ca..285422c7bd43 100644
> --- a/grub-core/loader/arm64/linux.c
> +++ b/grub-core/loader/arm64/linux.c
> @@ -48,9 +48,16 @@ static grub_uint32_t cmdline_size;
> static grub_addr_t initrd_start;
> static grub_addr_t initrd_end;
>
> +static struct grub_linux_initrd_context initrd_ctx = { 0, 0, 0 };
> +static grub_efi_handle_t initrd_lf2_handle;
> +static int initrd_use_loadfile2;
> +
> grub_err_t
> grub_arch_efi_linux_check_image (struct linux_arch_kernel_header * lh)
> {
> + struct grub_pe32_coff_header *coff_header;
> + struct grub_pe32_optional_header *optional_header;
> +
> if (lh->magic != GRUB_LINUX_ARMXX_MAGIC_SIGNATURE)
> return grub_error(GRUB_ERR_BAD_OS, "invalid magic number");
>
> @@ -61,6 +68,21 @@ grub_arch_efi_linux_check_image (struct
> linux_arch_kernel_header * lh)
> grub_dprintf ("linux", "UEFI stub kernel:\n");
> grub_dprintf ("linux", "PE/COFF header @ %08x\n", lh->hdr_offset);
>
> + coff_header = (struct grub_pe32_coff_header *)((unsigned long)lh +
> lh->hdr_offset);
> + optional_header = (struct grub_pe32_optional_header *)(coff_header + 1);
> +
> + /*
> + * Linux kernels built for any architecture are guaranteed to support the
> + * LoadFile2 based initrd loading protocol if the image version is >= 1.
> + */
> + if (optional_header->major_image_version >= 1)
> + initrd_use_loadfile2 = 1;
> + else
funky indentation
> + initrd_use_loadfile2 = 0;
> +
> + grub_dprintf ("linux", "LoadFile2 initrd loading %sabled\n",
> + initrd_use_loadfile2 ? "en" : "dis");
> +
> return GRUB_ERR_NONE;
> }
>
> @@ -230,13 +252,88 @@ allocate_initrd_mem (int initrd_pages)
> GRUB_EFI_LOADER_DATA);
> }
>
> +struct initrd_media_device_path {
> + grub_efi_vendor_media_device_path_t vendor;
> + grub_efi_device_path_t end;
> +} GRUB_PACKED;
> +
> +#define LINUX_EFI_INITRD_MEDIA_GUID \
> + { 0x5568e427, 0x68fc, 0x4f3d, \
> + { 0xac, 0x74, 0xca, 0x55, 0x52, 0x31, 0xcc, 0x68 } \
> + }
> +
> +static struct initrd_media_device_path initrd_lf2_device_path = {
> + {
> + {
> + GRUB_EFI_MEDIA_DEVICE_PATH_TYPE,
> + GRUB_EFI_VENDOR_MEDIA_DEVICE_PATH_SUBTYPE,
> + sizeof(grub_efi_vendor_media_device_path_t),
> + },
> + LINUX_EFI_INITRD_MEDIA_GUID
> + }, {
> + GRUB_EFI_END_DEVICE_PATH_TYPE,
> + GRUB_EFI_END_ENTIRE_DEVICE_PATH_SUBTYPE,
> + sizeof(grub_efi_device_path_t)
> + }
> +};
> +
> +static grub_efi_status_t
> +grub_efi_initrd_load_file2(grub_efi_load_file2_t *this,
Static functions don't need global prefixes (i.e., initrd_load_file2
would be sufficient).
> + grub_efi_device_path_t *device_path,
> + grub_efi_boolean_t boot_policy,
> + grub_efi_uintn_t *buffer_size,
> + void *buffer);
> +
> +static grub_efi_load_file2_t initrd_lf2 = {
> + grub_efi_initrd_load_file2
> +};
> +
> +static grub_efi_status_t
> +grub_efi_initrd_load_file2(grub_efi_load_file2_t *this,
> + grub_efi_device_path_t *device_path,
> + grub_efi_boolean_t boot_policy,
> + grub_efi_uintn_t *buffer_size,
> + void *buffer)
> +{
> + grub_efi_status_t status = GRUB_EFI_SUCCESS;
> + grub_efi_uintn_t initrd_size;
> +
> + if (!this || this != &initrd_lf2 || !buffer_size)
> + return GRUB_EFI_INVALID_PARAMETER;
> +
> + if (device_path->type != GRUB_EFI_END_DEVICE_PATH_TYPE ||
> + device_path->subtype != GRUB_EFI_END_ENTIRE_DEVICE_PATH_SUBTYPE)
> + return GRUB_EFI_NOT_FOUND;
> +
> + if (boot_policy)
> + return GRUB_EFI_UNSUPPORTED;
> +
> + initrd_size = grub_get_initrd_size (&initrd_ctx);
> + if (!buffer || *buffer_size < initrd_size)
> + {
> + *buffer_size = initrd_size;
> + return GRUB_EFI_BUFFER_TOO_SMALL;
> + }
> +
> + grub_dprintf ("linux", "Loading initrd via LOAD_FILE2_PROTOCOL\n");
> +
> + if (grub_initrd_load (&initrd_ctx, NULL, buffer))
> + status = GRUB_EFI_LOAD_ERROR;
> +
> + grub_initrd_close (&initrd_ctx);
> + return status;
> +}
> +
> static grub_err_t
> grub_cmd_initrd (grub_command_t cmd __attribute__ ((unused)),
> int argc, char *argv[])
> {
> - struct grub_linux_initrd_context initrd_ctx = { 0, 0, 0 };
> int initrd_size, initrd_pages;
> void *initrd_mem = NULL;
> + grub_efi_guid_t load_file2_guid = GRUB_EFI_LOAD_FILE2_PROTOCOL_GUID;
> + grub_efi_guid_t device_path_guid = GRUB_EFI_DEVICE_PATH_GUID;
> + grub_efi_boot_services_t *b;
> + grub_efi_status_t status;
>
> if (argc == 0)
> {
> @@ -254,6 +351,24 @@ grub_cmd_initrd (grub_command_t cmd __attribute__
> ((unused)),
> if (grub_initrd_init (argc, argv, &initrd_ctx))
> goto fail;
>
> + if (initrd_use_loadfile2 && !initrd_lf2_handle)
> + {
> + b = grub_efi_system_table->boot_services;
> + status = b->install_multiple_protocol_interfaces (&initrd_lf2_handle,
> + &load_file2_guid,
> + &initrd_lf2,
> + &device_path_guid,
> + &initrd_lf2_device_path,
> + NULL);
> + if (status == GRUB_EFI_OUT_OF_RESOURCES)
> + {
indented by spaces
> + grub_error (GRUB_ERR_OUT_OF_MEMORY, N_("out of memory"));
> + return grub_errno;
> + }
indented with tab
/
Leif
> + grub_dprintf ("linux", "LoadFile2 initrd loading protocol
> installed\n");
> + return GRUB_ERR_NONE;
> + }
> +
> initrd_size = grub_get_initrd_size (&initrd_ctx);
> grub_dprintf ("linux", "Loading initrd\n");
>
> --
> 2.17.1
>
- [PATCH 0/4] linux: implement LoadFile2 initrd loading, Ard Biesheuvel, 2020/10/23
- Re: [PATCH 0/4] linux: implement LoadFile2 initrd loading, Leif Lindholm, 2020/10/23
- [PATCH 1/4] loader/linux: permit NULL argument for argv[] in grub_initrd_load(), Ard Biesheuvel, 2020/10/23
- [PATCH 3/4] efi: implemented LoadFile2 initr loading protocol for Linux, Ard Biesheuvel, 2020/10/23
- Re: [PATCH 3/4] efi: implemented LoadFile2 initr loading protocol for Linux,
Leif Lindholm <=
- [PATCH 2/4] efi: add definition of LoadFile2 protocol, Ard Biesheuvel, 2020/10/23
- [PATCH 4/4] linux: ignore FDT unless we need to modify it, Ard Biesheuvel, 2020/10/23