[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH] btrfs: disable zstd support for i386-pc
From: |
Daniel Kiper |
Subject: |
Re: [PATCH] btrfs: disable zstd support for i386-pc |
Date: |
Wed, 13 Nov 2019 12:00:50 +0100 |
User-agent: |
NeoMutt/20170113 (1.7.2) |
On Thu, Nov 07, 2019 at 12:52:35PM +0100, Daniel Kiper wrote:
> On Wed, Nov 06, 2019 at 11:15:04AM -0800, Vladimir 'phcoder' Serbinenko wrote:
> > Please don't do it this way. The right solution is to move it to separate
> > module and include zstd module when needed. Not everybody uses btrfs
> > embedded area. I recommend not to use it. Using mbr gap or BBP is the
> > recommended way.
>
> I will put the cat among the pigeons. Maybe we should finally stop
> pretending that the GRUB supports small MBR gaps. Otherwise we will
> be fighting with such issues endlessly.
Bumping the thread... Nobody objects? Hmmm...
> Daniel
>
> > On Tue, 5 Nov 2019, 01:25 Michael Chang, <address@hidden> wrote:
> >
> > > The zstd support in btrfs has dependenciy to zstd module and core.img
> > > grows its size significantly to 75KB on my system. The resulted image
> > > cannot be installed into btrfs bootloader area in the size of 64KB and
> > > eventually fails with following message.
> > >
> > > /usr/sbin/grub-install: warning: your core.img is unusually large. It
> > > won't fit in the embedding area.
> > > /usr/sbin/grub-install: error: filesystem `btrfs' doesn't support
> > > blocklists.
> > >
> > > The patch disabled the zstd support of btrfs in pc-bios platform to
> > > avoid the regression. The resulting size is 56KB, albeit a bit too close
> > > to the 64KB but works. This is simple workaround until a proper fix
> > > landed upstream.
> > >
> > > Signed-off-by: Michael Chang <address@hidden>
> > > ---
> > > grub-core/fs/btrfs.c | 18 ++++++++++++++++++
> > > 1 file changed, 18 insertions(+)
> > >
> > > diff --git a/grub-core/fs/btrfs.c b/grub-core/fs/btrfs.c
> > > index 48bd3d04a..8f98892d3 100644
> > > --- a/grub-core/fs/btrfs.c
> > > +++ b/grub-core/fs/btrfs.c
> > > @@ -17,6 +17,7 @@
> > > * along with GRUB. If not, see <http://www.gnu.org/licenses/>.
> > > */
> > >
> > > +#ifndef GRUB_MACHINE_PCBIOS
> > > /*
> > > * Tell zstd to expose functions that aren't part of the stable API,
> > > which
> > > * aren't safe to use when linking against a dynamic library. We vendor
> > > in a
> > > @@ -24,6 +25,7 @@
> > > * functions to provide our own allocator, which uses grub_malloc(), to
> > > zstd.
> > > */
> > > #define ZSTD_STATIC_LINKING_ONLY
> > > +#endif
> > >
> > > #include <grub/err.h>
> > > #include <grub/file.h>
> > > @@ -35,7 +37,9 @@
> > > #include <grub/lib/crc.h>
> > > #include <grub/deflate.h>
> > > #include <minilzo.h>
> > > +#ifndef GRUB_MACHINE_PCBIOS
> > > #include <zstd.h>
> > > +#endif
> > > #include <grub/i18n.h>
> > > #include <grub/btrfs.h>
> > > #include <grub/crypto.h>
> > > @@ -56,8 +60,10 @@ GRUB_MOD_LICENSE ("GPLv3+");
> > > #define GRUB_BTRFS_LZO_BLOCK_MAX_CSIZE (GRUB_BTRFS_LZO_BLOCK_SIZE + \
> > > (GRUB_BTRFS_LZO_BLOCK_SIZE / 16) + 64
> > > + 3)
> > >
> > > +#ifndef GRUB_MACHINE_PCBIOS
> > > #define ZSTD_BTRFS_MAX_WINDOWLOG 17
> > > #define ZSTD_BTRFS_MAX_INPUT (1 << ZSTD_BTRFS_MAX_WINDOWLOG)
> > > +#endif
> > >
> > > typedef grub_uint8_t grub_btrfs_checksum_t[0x20];
> > > typedef grub_uint16_t grub_btrfs_uuid_t[8];
> > > @@ -229,7 +235,9 @@ struct grub_btrfs_extent_data
> > > #define GRUB_BTRFS_COMPRESSION_NONE 0
> > > #define GRUB_BTRFS_COMPRESSION_ZLIB 1
> > > #define GRUB_BTRFS_COMPRESSION_LZO 2
> > > +#ifndef GRUB_MACHINE_PCBIOS
> > > #define GRUB_BTRFS_COMPRESSION_ZSTD 3
> > > +#endif
> > >
> > > #define GRUB_BTRFS_OBJECT_ID_CHUNK 0x100
> > >
> > > @@ -1229,6 +1237,7 @@ grub_btrfs_read_inode (struct grub_btrfs_data *data,
> > > return grub_btrfs_read_logical (data, elemaddr, inode, sizeof (*inode),
> > > 0);
> > > }
> > >
> > > +#ifndef GRUB_MACHINE_PCBIOS
> > > static void *grub_zstd_malloc (void *state __attribute__((unused)),
> > > size_t size)
> > > {
> > > return grub_malloc (size);
> > > @@ -1318,6 +1327,7 @@ err:
> > >
> > > return ret;
> > > }
> > > +#endif
> > >
> > > static grub_ssize_t
> > > grub_btrfs_lzo_decompress(char *ibuf, grub_size_t isize, grub_off_t off,
> > > @@ -1494,8 +1504,12 @@ grub_btrfs_extent_read (struct grub_btrfs_data
> > > *data,
> > >
> > > if (data->extent->compression != GRUB_BTRFS_COMPRESSION_NONE
> > > && data->extent->compression != GRUB_BTRFS_COMPRESSION_ZLIB
> > > +#ifndef GRUB_MACHINE_PCBIOS
> > > && data->extent->compression != GRUB_BTRFS_COMPRESSION_LZO
> > > && data->extent->compression != GRUB_BTRFS_COMPRESSION_ZSTD)
> > > +#else
> > > + && data->extent->compression != GRUB_BTRFS_COMPRESSION_LZO)
> > > +#endif
> > > {
> > > grub_error (GRUB_ERR_NOT_IMPLEMENTED_YET,
> > > "compression type 0x%x not supported",
> > > @@ -1535,6 +1549,7 @@ grub_btrfs_extent_read (struct grub_btrfs_data
> > > *data,
> > > != (grub_ssize_t) csize)
> > > return -1;
> > > }
> > > +#ifndef GRUB_MACHINE_PCBIOS
> > > else if (data->extent->compression ==
> > > GRUB_BTRFS_COMPRESSION_ZSTD)
> > > {
> > > if (grub_btrfs_zstd_decompress (data->extent->inl,
> > > data->extsize -
> > > @@ -1544,6 +1559,7 @@ grub_btrfs_extent_read (struct grub_btrfs_data
> > > *data,
> > > != (grub_ssize_t) csize)
> > > return -1;
> > > }
> > > +#endif
> > > else
> > > grub_memcpy (buf, data->extent->inl + extoff, csize);
> > > break;
> > > @@ -1581,10 +1597,12 @@ grub_btrfs_extent_read (struct grub_btrfs_data
> > > *data,
> > > ret = grub_btrfs_lzo_decompress (tmp, zsize, extoff
> > > + grub_le_to_cpu64
> > > (data->extent->offset),
> > > buf, csize);
> > > +#ifndef GRUB_MACHINE_PCBIOS
> > > else if (data->extent->compression ==
> > > GRUB_BTRFS_COMPRESSION_ZSTD)
> > > ret = grub_btrfs_zstd_decompress (tmp, zsize, extoff
> > > + grub_le_to_cpu64
> > > (data->extent->offset),
> > > buf, csize);
> > > +#endif
> > > else
> > > ret = -1;
> > >
> > > --
> > > 2.16.4
- Re: [PATCH] btrfs: disable zstd support for i386-pc, (continued)