Summary: GRUB installed but boot failed on Fujitsu M10-4

[Sonnie Hook]

This is an Fujitsu M10-4 machine. DVD drive is installed on rear USB. Flash disk is installed on front USB.

cdrom is an alias of /address@hidden/address@hidden/address@hidden/address@hidden/address@hidden/address@hidden,1/address@hidden/disk

When booting from cdrom, the first lines are pasted below. I'm not sure if this is a problem:
[    1.265722] pci_sun4v: pci_iotsb_conf failed error: 6
[    1.265754] pci_sun4v: Error creating ATU IOTSB
[    1.265760] pci_sun4v: ATU init failed, err=6
[    1.285642] pci_sun4v: pci_iotsb_conf failed error: 6
[    1.285672] pci_sun4v: Error creating ATU IOTSB
[    1.285676] pci_sun4v: ATU init failed, err=6
[    1.306054] pci_sun4v: pci_iotsb_conf failed error: 6
[    1.306085] pci_sun4v: Error creating ATU IOTSB
[    1.306090] pci_sun4v: ATU init failed, err=6
[    1.326480] pci_sun4v: pci_iotsb_conf failed error: 6
[    1.326512] pci_sun4v: Error creating ATU IOTSB
[    1.326517] pci_sun4v: ATU init failed, err=6

The whole installation procedure is fine. After installing GRUB on /dev/sda1, I entered a shell and installed GRUB on /dev/sdb1 manually. Below are some outputs of commands that might help.

# archdetect
sparc64/sun4v_gpt                                                              

# partmap /dev/sda
gpt

# parted /dev/sda print
Model: LSI Logical Volume (scsi)
Disk /dev/sda: 599GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags:

Number  Start   End     Size    File system     Name  Flags
 1      1049kB  10.5MB  9437kB                     bios_grub
 2      10.5MB  533GB   533GB   ext4
 3      533GB   599GB   66.4GB  linux-swap(v1)

# parted /dev/sdb print
Model: Generic Flash Disk (scsi)
Disk /dev/sdb: 8179MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:

Number  Start   End     Size    File system  Name  Flags
 1      1049kB  30.4MB  29.4MB  ntfs               bios_grub
 
# mount -o bind /dev /target/dev
# mount -o bind /proc /target/proc
# mount -o bind /sys /target/sys
# chroot /target

# grub-ofpathname /dev/sda1
/address@hidden/address@hidden/address@hidden/address@hidden/address@hidden/address@hidden,0:a
# grub-ofpathname /dev/sdb1
/address@hidden/address@hidden/address@hidden/address@hidden/address@hidden/address@hidden,1/address@hidden,0:a

# grub-install --force-extra-removable "/dev/sdb"
Installing for sparc64-ieee1275 platform.
Installation finished. No error reported.

-------

{0} ok cd /packages/disk-label
{0} ok .properties
gpt
supported-labels gpt
sun
mbr
name disk-label

{0} ok boot /address@hidden/address@hidden/address@hidden/address@hidden/address@hidden/address@hidden,0:a
Boot device: /address@hidden/address@hidden/address@hidden/address@hidden/address@hidden/address@hidden,0:a  File and args:

Can't open boot device

{0} ok boot /address@hidden/address@hidden/address@hidden/address@hidden/address@hidden/address@hidden,1/address@hidden,0:a
Boot device: /address@hidden/address@hidden/address@hidden/address@hidden/address@hidden/address@hidden,1/address@hidden,0:a  File and args:
GRUB Loading kernel.
vitual-device not found.
ERROR: Last Trap: Fast Data Access MMU Miss
TL:   1

%TL:1 %TT:68 %TPC:127a0 %TnPC:127a4
%TSTATE:1602  %CWP:2
   %PSTATE:16 AG:0 IE:1 PRIV:1 AM:0 PEF:1 RED:0 MM:0 TLE:0 CLE:0 MG:0 IG:0
   %ASI:0  %CCR:0  XCC:nzvc   ICC:nzvc

%TL:2 %TT:183 %TPC:f0249ccc %TnPC:f0200d00
%TSTATE:10000001402  %CWP:2
   %PSTATE:14 AG:0 IE:0 PRIV:1 AM:0 PEF:1 RED:0 MM:0 TLE:0 CLE:0 MG:0 IG:0
   %ASI:0  %CCR:0  XCC:nzvc   ICC:nzvc

        INs             LOCALs          OUTs
0:             254c0         2d3c2808            25360
1:                 0         6db08fa4                0
2:             257c2                0                0
3:             255e0                0                3
4:             2c200         ffb06cb0            25620
5:                 0         fefc57f8            25520
6:             6b2b1         f0285e54            6b201
7:              53d8         f022a2fc            11e10

        Normal          GL=1
0:                 0                0
1:                 0                2
2:                 0     7c000fffc000
3:                 0     7c0000400740
4:             19000     7c000fffc000
5:                2f     7c000ff53a90
6:                 0     7c000ff53d60
7:                 0         f0249c04
%PC  127a0 %nPC 127a4
%TBA f0200000 %CCR 16 XCC:nzvC   ICC:nZVc
alive-check-started-number = 8

Instruction Fault Address:            25e000
Instruction Fault Context:                 0
Data Fault Address:                        0
Data Fault Context:                        0

Instruction code: d80a4001


            255e0
                0
            19028
            2c1a0
            2a180
 fee58c3800000004
              63c
       100000000c
                0
            25820
                3