[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2] Makefile: Allow to set file systems modules for default_p
From: |
Daniel Kiper |
Subject: |
Re: [PATCH v2] Makefile: Allow to set file systems modules for default_payload.elf |
Date: |
Fri, 8 Mar 2019 11:45:41 +0100 |
User-agent: |
NeoMutt/20170113 (1.7.2) |
On Fri, Mar 08, 2019 at 02:34:55AM +0100, Paul Menzel wrote:
> Dear Daniel,
>
> On 07.03.19 20:37, Daniel Kiper wrote:
> > On Thu, Mar 07, 2019 at 12:16:06PM +0100, Paul Menzel wrote:
> > > Date: Wed Mar 6 08:14:28 2019 +0100
> > >
> > > By default all file system modules are added to the GRUB coreboot
> > > payload `default_payload.elf`. This makes the image quite big,
> > > especially as often not all modules are needed.
> > >
> > > Introduce the variable `FS_PAYLOAD_MODULES`, which can be used to
> > > explicitly set file systems modules to be added.
> > >
> > > $ make default_payload.elf
> > > test -f default_payload.elf && rm default_payload.elf || true
> > > pkgdatadir=. ./grub-mkstandalone --grub-mkimage=./grub-mkimage -O
> > > i386-coreboot -o default_payload.elf --modules='ahci pata ehci uhci ohci
> > > usb_keyboard usbms part_msdos ext2 fat at_keyboard part_gpt
> > > usbserial_usbdebug cbfs' --install-modules='ls linux search configfile
> > > normal cbtime cbls memrw iorw minicmd lsmmap lspci halt reboot hexdump
> > > pcidump regexp setpci lsacpi chain test serial multiboot cbmemc linux16
> > > gzio echo help syslinuxcfg xnu affs afs bfs btrfs cbfs cpio cpio_be exfat
> > > ext2 f2fs fat hfs hfsplus iso9660 jfs minix minix2 minix2_be minix3
> > > minix3_be minix_be newc nilfs2 ntfs odc procfs reiserfs romfs sfs squash4
> > > tar udf ufs1 ufs1_be ufs2 xfs zfs password_pbkdf2 ' --fonts= --themes=
> > > --locales= -d grub-core/ /boot/grub/grub.cfg=./coreboot.cfg
> > > $ ls -l default_payload.elf
> > > -rw-rw---- 1 joey joey 1199568 Mar 6 13:58 default_payload.elf
> > >
> > > $ make default_payload.elf FS_PAYLOAD_MODULES="" # ext2 already in
> > > `--modules`
> > > test -f default_payload.elf && rm default_payload.elf || true
> > > pkgdatadir=. ./grub-mkstandalone --grub-mkimage=./grub-mkimage -O
> > > i386-coreboot -o default_payload.elf --modules='ahci pata ehci uhci ohci
> > > usb_keyboard usbms part_msdos ext2 fat at_keyboard part_gpt
> > > usbserial_usbdebug cbfs' --install-modules='ls linux search configfile
> > > normal cbtime cbls memrw iorw minicmd lsmmap lspci halt reboot hexdump
> > > pcidump regexp setpci lsacpi chain test serial multiboot cbmemc linux16
> > > gzio echo help syslinuxcfg xnu password_pbkdf2 ' --fonts= --themes=
> > > --locales= -d grub-core/ /boot/grub/grub.cfg=./coreboot.cfg
> > > $ ls -l default_payload.elf
> > > -rw-rw---- 1 joey joey 832976 Mar 7 12:13 default_payload.elf
> > >
> > > So, the resulting payload size is around 370 kB smaller. (Adding it to
> > > the CBFS, it will be compressed, so the effective size difference will
> > > be smaller.)
> > >
> > > Signed-off-by: Paul Menzel <address@hidden>
> > > ---
> > > Makefile.am | 3 ++-
> > > 1 file changed, 2 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/Makefile.am b/Makefile.am
> > > index 94296a37e..1f4bb9b8c 100644
> > > --- a/Makefile.am
> > > +++ b/Makefile.am
> > > @@ -422,9 +422,10 @@ BOOTCHECK_TIMEOUT=180
> > > bootcheck: $(BOOTCHECKS)
> > >
> > > if COND_i386_coreboot
> > > +FS_PAYLOAD_MODULES ?= $(shell cat grub-core/fs.lst)
> > > default_payload.elf: grub-mkstandalone grub-mkimage FORCE
> > > test -f $@ && rm $@ || true
> > > - pkgdatadir=. ./grub-mkstandalone --grub-mkimage=./grub-mkimage -O
> > > i386-coreboot -o $@ --modules='ahci pata ehci uhci ohci usb_keyboard
> > > usbms part_msdos ext2 fat at_keyboard part_gpt usbserial_usbdebug cbfs'
> > > --install-modules='ls linux search configfile normal cbtime cbls memrw
> > > iorw minicmd lsmmap lspci halt reboot hexdump pcidump regexp setpci
> > > lsacpi chain test serial multiboot cbmemc linux16 gzio echo help
> > > syslinuxcfg xnu $(shell cat grub-core/fs.lst) password_pbkdf2
> > > $(EXTRA_PAYLOAD_MODULES)' --fonts= --themes= --locales= -d grub-core/
> > > /boot/grub/grub.cfg=$(srcdir)/coreboot.cfg
> >
> > If you do that why not go further and drop...
> >
> > > + pkgdatadir=. ./grub-mkstandalone --grub-mkimage=./grub-mkimage
> > > -O i386-coreboot -o $@ --modules='ahci pata ehci uhci ohci
> > > usb_keyboard usbms part_msdos ext2 fat at_keyboard part_gpt
> >
> > ... ext2, fat...
>
> They are added to the “core image”, so that one has a chance to load modules
> or other files like payloads from these common file systems. I suppose, it’s
> safer to have these included by default.
>
> > > usbserial_usbdebug cbfs' --install-modules='ls linux search configfile
> >
> > ... and cbfs from here? Does anything depend on these filesystems?
>
> Yes, at least the configuration file `etc/grub.cfg` is stored in CBFS. The
> file is read by the GRUB payload by default. So the module *cbfs* is
> essential for the GRUB payload.
OK, then Reviewed-by: Daniel Kiper <address@hidden>
Daniel