[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: sgi O2 supported?
|
From: |
Andrei Borzenkov |
|
Subject: |
Re: sgi O2 supported? |
|
Date: |
Sat, 7 Jan 2017 22:54:04 +0300 |
|
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.5.1 |
07.01.2017 22:34, Waldemar Brodkorb пишет:
> Hi,
>
> can I use grub to bootup Linux/mips64 from SCSI disk on a
> SGI O2 machine?
>
> I cross-compiled grub (git hash
> 07662af7aed55bcec448bc2a6610de1f0cb62100).
> The toolchain is fine, I can bootup a Linux system via TFTP.
>
> I create a grub.img
For which platform?
> with following modules included:
> boot linux ext2 part_dvh normal
>
> I copy grub.img with dvhtool to the volume header and
> try to bootup:
>
>> setenv OSLoader grub
>> boot
> 341112
> Cannot load scsi(0)disk(1)rdisk(0)partition(8)/grub.
> Range check failure: text start 0x881ffde0, size 0x53478.
> Text section would overwrite an already loaded program.Unable to
> execute scsi(0)disk(1)rdisk(0)partition(8)/grub: not enough space
> Unable to load scsi(0)disk(1)rdisk(0)partition(8)/grub: not enough
> space
>
> Seems like the load address is bad?
>
> Is it possible to use grub for this task?
>
> best regards
> Waldemar
>
> _______________________________________________
> Grub-devel mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/grub-devel
>