[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[MULTIBOOT2 DOC PATCH v3 07/13] multiboot2: Add description of support f
From: |
Daniel Kiper |
Subject: |
[MULTIBOOT2 DOC PATCH v3 07/13] multiboot2: Add description of support for EFI boot services |
Date: |
Tue, 6 Dec 2016 23:52:55 +0100 |
Signed-off-by: Daniel Kiper <address@hidden>
---
v3 - suggestions/fixes:
- replace u_virt with u32
(suggested by Andrei Borzenkov and Toomas Soome),
- change RAX/RBX to EAX/EBX in "EFI amd64 machine state with boot
services enabled" section,
- describe the kernel, the modules, etc. load addresses limitation
in "EFI amd64 machine state with boot services enabled" section,
- replace Multiboot-compliant with Multiboot2-compliant.
v2 - suggestions/fixes:
- clarify physical address meaning for EFI amd64
mode with boot services enabled
(suggested by Andrew Cooper).
---
doc/multiboot.texi | 124 ++++++++++++++++++++++++++++++++++++++++++++++++++++
doc/multiboot2.h | 2 +
2 files changed, 126 insertions(+)
diff --git a/doc/multiboot.texi b/doc/multiboot.texi
index 9af756a..9f13e74 100644
--- a/doc/multiboot.texi
+++ b/doc/multiboot.texi
@@ -528,6 +528,66 @@ The physical address to which the boot loader should jump
in order to
start running the operating system.
@end table
address@hidden EFI i386 entry address tag of Multiboot2 header
+
address@hidden
address@hidden
+ +-------------------+
+u16 | type = 8 |
+u16 | flags |
+u32 | size |
+u32 | entry_addr |
+ +-------------------+
address@hidden group
address@hidden example
+
+All of the address fields in this tag are physical addresses.
+The meaning of each is as follows:
+
address@hidden @code
+
address@hidden entry_addr
+The physical address to which the boot loader should jump in order to
+start running EFI i386 compatible operating system code.
address@hidden table
+
+This tag is taken into account only on EFI i386 platforms
+when Multiboot2 image header contains EFI boot services tag.
+Then entry point specified in ELF header and the entry address
+tag of Multiboot2 header are ignored.
+
address@hidden EFI amd64 entry address tag of Multiboot2 header
+
address@hidden
address@hidden
+ +-------------------+
+u16 | type = 9 |
+u16 | flags |
+u32 | size |
+u32 | entry_addr |
+ +-------------------+
address@hidden group
address@hidden example
+
+All of the address fields in this tag are physical addresses (paging
+mode is enabled and any memory space defined by the UEFI memory map
+is identity mapped, hence, virtual address equals physical address;
+Unified Extensible Firmware Interface Specification, Version 2.6,
+section 2.3.4, x64 Platforms, boot services). The meaning of each
+is as follows:
+
address@hidden @code
+
address@hidden entry_addr
+The physical address to which the boot loader should jump in order to
+start running EFI amd64 compatible operating system code.
address@hidden table
+
+This tag is taken into account only on EFI amd64 platforms
+when Multiboot2 image header contains EFI boot services tag.
+Then entry point specified in ELF header and the entry address
+tag of Multiboot2 header are ignored.
+
@node Console header tags
@subsection Flags tag
@@ -708,6 +768,70 @@ The OS image must leave interrupts disabled until it sets
up its own
On EFI system boot services must be terminated.
address@hidden EFI i386 machine state with boot services enabled
+
+When the boot loader invokes the 32-bit operating system on EFI i386
+platform and EFI boot services tag together with EFI i386 entry address
+tag are present in the image Multiboot2 header, the machine must have the
+following state:
+
address@hidden @samp
address@hidden EAX
+Must contain the magic value @samp{0x36d76289}; the presence of this
+value indicates to the operating system that it was loaded by a
+Multiboot2-compliant boot loader (e.g. as opposed to another type of
+boot loader that the operating system can also be loaded from).
+
address@hidden EBX
+Must contain the 32-bit physical address of the Multiboot2
+information structure provided by the boot loader (@pxref{Boot
+information format}).
address@hidden table
+
+All other processor registers, flag bits and state are set accordingly
+to Unified Extensible Firmware Interface Specification, Version 2.6,
+section 2.3.2, IA-32 Platforms, boot services.
+
address@hidden EFI amd64 machine state with boot services enabled
+
+When the boot loader invokes the 64-bit operating system on EFI amd64
+platform and EFI boot services tag together with EFI amd64 entry address
+tag are present in the image Multiboot2 header, the machine must have the
+following state:
+
address@hidden @samp
address@hidden EAX
+Must contain the magic value @samp{0x36d76289}; the presence of this
+value indicates to the operating system that it was loaded by a
+Multiboot2-compliant boot loader (e.g. as opposed to another type of
+boot loader that the operating system can also be loaded from).
+
address@hidden EBX
+Must contain the 64-bit physical address (paging mode is enabled and any
+memory space defined by the UEFI memory map is identity mapped, hence,
+virtual address equals physical address; Unified Extensible Firmware
+Interface Specification, Version 2.6, section 2.3.4, x64 Platforms, boot
+services) of the Multiboot2 information structure provided by the boot
+loader (@pxref{Boot information format}).
address@hidden table
+
+All other processor registers, flag bits and state are set accordingly
+to Unified Extensible Firmware Interface Specification, Version 2.6,
+section 2.3.4, x64 Platforms, boot services.
+
+The bootloader must not load any part of the kernel, the modules, the
Multiboot2
+information structure, etc. higher than 4 GiB - 1. This requirement is put in
+force because most of currently specified tags supports 32-bit addresses only.
+Additionally, some kernels, even if they run on EFI 64-bit platform, still
+execute some parts of its initialization code in 32-bit mode.
+
+Note: If at some point there is a need for full 64-bit mode support in
Multiboot2
+protocol then it should be designed very carefully. Especially it should be
taken
+into account that 32-bit and 64-bit mode code should coexist in an image
without
+any issue. The image should have a chance to inform the bootloader that it
supports
+full 64-bit mode. If it is the case then the bootloader should provide 64-bit
tags
+if it is desired and possible. Otherwise 32-bit tags should be used.
+
@node Boot information format
@section Boot information
@subsection Boot information format
diff --git a/doc/multiboot2.h b/doc/multiboot2.h
index 78337f5..240400d 100644
--- a/doc/multiboot2.h
+++ b/doc/multiboot2.h
@@ -69,6 +69,8 @@
#define MULTIBOOT_HEADER_TAG_FRAMEBUFFER 5
#define MULTIBOOT_HEADER_TAG_MODULE_ALIGN 6
#define MULTIBOOT_HEADER_TAG_EFI_BS 7
+#define MULTIBOOT_HEADER_TAG_ENTRY_ADDRESS_EFI32 8
+#define MULTIBOOT_HEADER_TAG_ENTRY_ADDRESS_EFI64 9
#define MULTIBOOT_ARCHITECTURE_I386 0
#define MULTIBOOT_ARCHITECTURE_MIPS32 4
--
1.7.10.4
- [MULTIBOOT2 DOC PATCH v3 00/13] multiboot2: Update documentation, Daniel Kiper, 2016/12/06
- [MULTIBOOT2 DOC PATCH v3 02/13] multiboot2: Replace u_virt with u32, Daniel Kiper, 2016/12/06
- [MULTIBOOT2 DOC PATCH v3 01/13] multiboot2: Replace u_phys with u32, Daniel Kiper, 2016/12/06
- [MULTIBOOT2 DOC PATCH v3 04/13] multiboot2: Replace redundant if with the, Daniel Kiper, 2016/12/06
- [MULTIBOOT2 DOC PATCH v3 05/13] multiboot2: Clarify meaning of information request header tag, Daniel Kiper, 2016/12/06
- [MULTIBOOT2 DOC PATCH v3 03/13] multiboot2: Rename Multiboot to Multiboot2, Daniel Kiper, 2016/12/06
- [MULTIBOOT2 DOC PATCH v3 06/13] multiboot2: Fix description of EFI boot services tag, Daniel Kiper, 2016/12/06
- [MULTIBOOT2 DOC PATCH v3 07/13] multiboot2: Add description of support for EFI boot services,
Daniel Kiper <=
- [MULTIBOOT2 DOC PATCH v3 10/13] multiboot2: Say that memory maps may not be available on EFI platforms, Daniel Kiper, 2016/12/06
- [MULTIBOOT2 DOC PATCH v3 08/13] multiboot2: Add description of EFI image handle tags, Daniel Kiper, 2016/12/06
- [MULTIBOOT2 DOC PATCH v3 09/13] multiboot2: Add description of support for relocatable images, Daniel Kiper, 2016/12/06
- [MULTIBOOT2 DOC PATCH v3 11/13] multiboot2: Add C structure members alignment and padding consideration section, Daniel Kiper, 2016/12/06
- [MULTIBOOT2 DOC PATCH v3 12/13] multiboot2: Add me to authors, Daniel Kiper, 2016/12/06
- [MULTIBOOT2 DOC PATCH v3 13/13] multiboot2: Bump version to 2.0, Daniel Kiper, 2016/12/06
- Re: [MULTIBOOT2 DOC PATCH v3 00/13] multiboot2: Update documentation, Konrad Rzeszutek Wilk, 2016/12/06