grub-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [f2fs-dev] [PATCH v6] F2FS support


From: Jaegeuk Kim
Subject: Re: [f2fs-dev] [PATCH v6] F2FS support
Date: Mon, 22 Feb 2016 10:21:49 -0800
User-agent: Mutt/1.5.23 (2014-03-12)

Hi Andrei,

I'll send v7 which addresses your comment.

Thanks,

On Mon, Feb 22, 2016 at 12:25:26PM +0300, Andrei Borzenkov wrote:
> 08.01.2016 22:41, Jaegeuk Kim пишет:
> > Change log from v5:
> >  o fix build warning for ARM, reported by Michael Zimmermann
> > 
> > Thanks to Michael for testing this patch.
> > 
> > -- >8 --
> > From 284fd66662a6d5e07770cc021c8f59b538471c35 Mon Sep 17 00:00:00 2001
> > From: Jaegeuk Kim <address@hidden>
> > Date: Tue, 17 Nov 2015 12:45:13 -0800
> > Subject: [PATCH] F2FS support
> > 
> > "F2FS (Flash-Friendly File System) is flash-friendly file system which was 
> > merged
> > into Linux kernel v3.8 in 2013.
> > 
> > The motive for F2FS was to build a file system that from the start, takes 
> > into
> > account the characteristics of NAND flash memory-based storage devices 
> > (such as
> > solid-state disks, eMMC, and SD cards).
> > 
> > F2FS was designed on a basis of a log-structured file system approach, which
> > remedies some known issues of the older log structured file systems, such as
> > the snowball effect of wandering trees and high cleaning overhead. In 
> > addition,
> > since a NAND-based storage device shows different characteristics according 
> > to
> > its internal geometry or flash memory management scheme (such as the Flash
> > Translation Layer or FTL), it supports various parameters not only for
> > configuring on-disk layout, but also for selecting allocation and cleaning
> > algorithm.", quote by https://en.wikipedia.org/wiki/F2FS.
> > 
> > The source codes for F2FS are available from:
> > 
> > http://git.kernel.org/cgit/linux/kernel/git/jaegeuk/f2fs.git
> > http://git.kernel.org/cgit/linux/kernel/git/jaegeuk/f2fs-tools.git
> > 
> 
> Sorry for delay. I'm fine with it (with single nitpick, see below);
> Vladimir has final word whether this can be committed.
> ...
> 
> > +static grub_ssize_t
> > +grub_f2fs_read_file (grub_fshelp_node_t node,
> > +           grub_disk_read_hook_t read_hook, void *read_hook_data,
> > +           grub_off_t pos, grub_size_t len, char *buf)
> > +{
> > +  struct grub_f2fs_inode *inode = &node->inode.i;
> > +  grub_off_t filesize = grub_f2fs_file_size (inode);
> > +  char *inline_addr = __inline_addr (inode);
> > +
> > +  if (inode->i_inline & F2FS_INLINE_DATA)
> > +    {
> > +      if (pos > filesize || filesize > MAX_INLINE_DATA)
> 
> GRUB checks that pos < filesize before calling into fs so this is
> redundant. And filesize check is static so can be done in ->open.



reply via email to

[Prev in Thread] Current Thread [Next in Thread]