[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: How to make/compile and link Open Source gnu-2.00 package?
From: |
Andrey Borzenkov |
Subject: |
Re: How to make/compile and link Open Source gnu-2.00 package? |
Date: |
Tue, 23 Jul 2013 20:58:48 +0400 |
В Tue, 23 Jul 2013 14:15:49 +0000
"Stojsavljevic, Zoran" <address@hidden> пишет:
> Hello to GRUB community,
>
> I continued to explore and read the documentations, and so far I was not able
> to boot from my GRUB made and install from original GRUB package.
>
> I had all tools installed in /usr/local/sbin (all relevant tools), and then
> executed the following command:
> grub-install --boot-directory=/media/rootfs/boot
> --directory=/usr/local/lib/grub/i386-coreboot target=x86_64
>
--directory and --target are mutually exclusive and normally none is
needed - grub-install will autodetect current platform. Only if you
want to install GRUB for platform different from current (e.g. install
GRUB for EFI while running in legacy BIOS mode).
--target means use modules from standard system-wide location and is
normally used after grub is installed. --directory overrides module
location and is usually used before installation.
> It installed for me everything on the target HDD (mounted on /media/rootfs),
> in the directory /media/rootfs/boot/grub/i386-coreboot (I found there file
> core.elf, size 105K).
>
> But I also used the following command from the same /usb/local/sbin:
> grub-mkimage --directory=/usr/local/lib/grub/i386-coreboot -o
> /media/rootfs/boot/grub/core.img -O i386-coreboot
>
> And this command built for me core.img in /media/rootfs/boot/grub of size 27K.
>
> It seems that these two files are identical,
grub-install detects which drivers are needed to access
--boot-directory and adds them to core.img. When using grub-mkimage
directly it is up to you to specify correct drivers.
> till the end of file, where core.img has directory in ascii: /boot/grub
>
> I try to embed both files consecutively in coreboot as payload, in sincere
> hope to boot to MBR and get the grub> prompt.
>
> But I did not succeed, and my IVB platform stopped at Post Code 0x00F8
> (PEI_RECOVERY_PPI_NOT_FOUND) instead stopping to (0x00A3) DXE IDE Detect.
>
Can't help you here, sorry.
> Any clue what I am doing wrong?
>
> Thank you,
> Zoran
> _______
> Most of The Time you should be "intel inside" to be capable to think "out of
> the box".
>
> From: Stojsavljevic, Zoran
> Sent: Thursday, July 18, 2013 3:48 PM
> To: address@hidden
> Subject: How to make/compile and link Open Source gnu-2.00 package?
>
> Hello,
>
> I would like to set/configure Open Source gnu-2.00 package (or later) in
> order to be able to support the following configuration on my target HDD:
>
> Directory /boot:
> address@hidden boot]$ ls -al
> total 84580
> drwxr-xr-x. 3 root root 4096 Jul 12 14:27 .
> drwxr-xr-x. 22 root root 4096 Jul 17 15:41 ..
> -rw-------. 1 root root 512 Feb 6 2012 backup_mbr
> lrwxrwxrwx. 1 root root 1 Feb 6 2012 boot -> .
> -rw-r--r--. 1 root root 1236 May 10 2010 boot.readme
> -rw-r--r--. 1 root root 107874 May 20 2010 config-2.6.32.12-0.7-default
> drwxr-xr-x. 2 root root 4096 Mar 27 15:26 grub
> lrwxrwxrwx. 1 root root 28 Feb 6 2012 initrd ->
> initrd-2.6.32.12-0.7-default
> -rw-r--r--. 1 root root 6514736 Feb 6 2012 initrd-2.6.32.12-0.7-default
> -rw-r--r--. 1 root root 6667077 Mar 25 23:14 initrd-3.0.13default2
> -rw-------. 1 root root 22243322 Mar 27 14:17 initrd-3.4.37-0.27-default
> -rw-------. 1 root root 22539906 Mar 27 15:17 initrd-3.8.4-0.27-default
> -rw-r--r--. 1 root root 435712 Feb 6 2012 message
> -rw-r--r--. 1 root root 189729 May 20 2010
> symsets-2.6.32.12-0.7-default.tar.gz
> -rw-r--r--. 1 root root 495291 May 20 2010
> symtypes-2.6.32.12-0.7-default.gz
> -rw-r--r--. 1 root root 178468 May 20 2010
> symvers-2.6.32.12-0.7-default.gz
> -rw-r--r--. 1 root root 1651761 May 20 2010
> System.map-2.6.32.12-0.7-default -rw-r--r--. 1 root root 2332527 Mar 25
> 23:14 System.map-3.0.13default2 -rw-r--r--. 1 root root 2041118 Mar 27
> 14:17 System.map-3.4.37-0.27-default -rw-r--r--. 1 root root 2133832 Mar 27
> 15:17 System.map-3.8.4-0.27-default -rw-r--r--. 1 root root 3774506 May 20
> 2010 vmlinux-2.6.32.12-0.7-default.gz
> lrwxrwxrwx. 1 root root 29 Feb 6 2012 vmlinuz ->
> vmlinuz-2.6.32.12-0.7-default
> -rw-r--r--. 1 root root 3231872 May 20 2010 vmlinuz-2.6.32.12-0.7-default
> -rw-r--r--. 1 root root 4779280 Mar 25 23:14 vmlinuz-3.0.13default2
> -rw-r--r--. 1 root root 3454320 Mar 27 14:17 vmlinuz-3.4.37-0.27-default
> -rw-r--r--. 1 root root 3635840 Mar 27 15:17 vmlinuz-3.8.4-0.27-default
>
> I would like to have in /boot/grub/ the following (similar) directory on my
> target HDD as result of the grub-install command (in /usr/local/sbin on my
> development system):
>
> drwxr-xr-x. 2 root root 4096 Mar 27 15:26 .
> drwxr-xr-x. 3 root root 4096 Jul 12 14:27 ..
> -rw-------. 1 root root 10 Feb 6 2012 default
> -rw-------. 1 root root 47 Feb 6 2012 device.map
> -rw-r--r--. 1 root root 46 Feb 6 2012 device.map.old
> -rw-r--r--. 1 root root 8576 May 11 2010 e2fs_stage1_5
> -rw-r--r--. 1 root root 7840 May 11 2010 fat_stage1_5
> -rw-r--r--. 1 root root 7104 May 11 2010 ffs_stage1_5
> -rw-r--r--. 1 root root 7104 May 11 2010 iso9660_stage1_5
> -rw-r--r--. 1 root root 8576 May 11 2010 jfs_stage1_5
> -rw-------. 1 root root 1701 Mar 27 15:26 menu.lst
> -rw-------. 1 root root 1694 Feb 6 2012 menu.lst.old
> -rw-r--r--. 1 root root 7264 May 11 2010 minix_stage1_5
> -rw-r--r--. 1 root root 9600 May 11 2010 reiserfs_stage1_5
> -rw-r--r--. 1 root root 512 May 11 2010 stage1
> -rw-r--r--. 1 root root 101962 Feb 6 2012 stage2
> -rw-r--r--. 1 root root 7456 May 11 2010 ufs2_stage1_5
> -rw-r--r--. 1 root root 6656 May 11 2010 vstafs_stage1_5
> -rw-r--r--. 1 root root 9288 May 11 2010 xfs_stage1_5
>
> And would be able to jump from Coreboot to start executing stage1 (MBR)?
>
> Actually, I don't mind having *.elf which will somehow jump to /boot/grub (?)
> from Coreboot to see in the /boot all these kernels?
>
> Any GRUB BKM web page for that?
>
> Thank you,
> Zoran
> _______
> Most of The Time you should be "intel inside" to be capable to think "out of
> the box".
>
> Intel GmbH
> Dornacher Strasse 1
> 85622 Feldkirchen/Muenchen, Deutschland
> Sitz der Gesellschaft: Feldkirchen bei Muenchen
> Geschaeftsfuehrer: Christian Lamprechter, Hannes Schwaderer, Douglas Lusk
> Registergericht: Muenchen HRB 47456
> Ust.-IdNr./VAT Registration No.: DE129385895
> Citibank Frankfurt a.M. (BLZ 502 109 00) 600119052