[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Groff-commit] groff ChangeLog INSTALL.gen Makefile.in Makefil...
From: |
Bernd Warken |
Subject: |
[Groff-commit] groff ChangeLog INSTALL.gen Makefile.in Makefil... |
Date: |
Tue, 16 Apr 2013 19:00:47 +0000 |
CVSROOT: /cvsroot/groff
Module name: groff
Changes by: Bernd Warken <bwarken> 13/04/16 19:00:47
Modified files:
. : ChangeLog INSTALL.gen Makefile.in Makefile.sub
aclocal.m4
contrib/glilypond: subs.pl
m4 : groff.m4
src/roff/grog : Makefile.sub
Added files:
. : INSTALL.CVS
m4 : ax_prog_perl_version.m4
Removed files:
. : INSTALL.autotools
Log message:
INSTALL.gen: Replace this file by the daily `git' version of
`automake' `INSTALL' file.
INSTALL.autotools: Remove file.
INSTALL.CVS: New file, moved from `INSTALL.autotools'.
m4/ax_prog_perl_version.m4: New file, taken from package
`autoconf-archive-2013.04.06'.
m4/groff.m4: Remove unnecessary blank line.
Makefile.in: Add `$(PERLVERSION)'.
aclocal.m4: Run `autoreconf -I m4' (this includes
`aclocal -I m4'). This creates a suitable `aclocal.m4'. Remove
generated subdirectory `autom4te.cache'.
src/roff/grog/Makefile.sub: Correct `sed' command. Use `tabs'
that are needed by `GNU make'.
CVSWeb URLs:
http://cvs.savannah.gnu.org/viewcvs/groff/ChangeLog?cvsroot=groff&r1=1.1411&r2=1.1412
http://cvs.savannah.gnu.org/viewcvs/groff/INSTALL.gen?cvsroot=groff&r1=1.8&r2=1.9
http://cvs.savannah.gnu.org/viewcvs/groff/Makefile.in?cvsroot=groff&r1=1.129&r2=1.130
http://cvs.savannah.gnu.org/viewcvs/groff/Makefile.sub?cvsroot=groff&r1=1.21&r2=1.22
http://cvs.savannah.gnu.org/viewcvs/groff/aclocal.m4?cvsroot=groff&r1=1.61&r2=1.62
http://cvs.savannah.gnu.org/viewcvs/groff/INSTALL.CVS?cvsroot=groff&rev=1.1
http://cvs.savannah.gnu.org/viewcvs/groff/INSTALL.autotools?cvsroot=groff&r1=1.1&r2=0
http://cvs.savannah.gnu.org/viewcvs/groff/contrib/glilypond/subs.pl?cvsroot=groff&r1=1.2&r2=1.3
http://cvs.savannah.gnu.org/viewcvs/groff/m4/groff.m4?cvsroot=groff&r1=1.13&r2=1.14
http://cvs.savannah.gnu.org/viewcvs/groff/m4/ax_prog_perl_version.m4?cvsroot=groff&rev=1.1
http://cvs.savannah.gnu.org/viewcvs/groff/src/roff/grog/Makefile.sub?cvsroot=groff&r1=1.16&r2=1.17
Patches:
Index: ChangeLog
===================================================================
RCS file: /cvsroot/groff/groff/ChangeLog,v
retrieving revision 1.1411
retrieving revision 1.1412
diff -u -b -r1.1411 -r1.1412
--- ChangeLog 15 Apr 2013 23:40:53 -0000 1.1411
+++ ChangeLog 16 Apr 2013 19:00:42 -0000 1.1412
@@ -1,5 +1,28 @@
2013-04-16 Bernd Warken <address@hidden>
+ * INSTALL.gen: Replace this file by the daily `git' version of
+ `automake' `INSTALL' file.
+
+ * INSTALL.autotools: Remove file.
+
+ * INSTALL.CVS: New file, moved from `INSTALL.autotools'.
+
+ * m4/ax_prog_perl_version.m4: New file, taken from package
+ `autoconf-archive-2013.04.06'.
+
+ * m4/groff.m4: Remove unnecessary blank line.
+
+ * Makefile.in: Add `$(PERLVERSION)'.
+
+ * aclocal.m4: Run `autoreconf -I m4' (this includes
+ `aclocal -I m4'). This creates a suitable `aclocal.m4'. Remove
+ generated subdirectory `autom4te.cache'.
+
+ * src/roff/grog/Makefile.sub: Correct `sed' command. Use `tabs'
+ that are needed by `GNU make'.
+
+2013-04-16 Bernd Warken <address@hidden>
+
* Makefile.sub: Add `m4/ax_compare_version.m4'.
* aclocal.m4: Run the latest `aclocal -I m4' which generates a
Index: INSTALL.gen
===================================================================
RCS file: /cvsroot/groff/groff/INSTALL.gen,v
retrieving revision 1.8
retrieving revision 1.9
diff -u -b -r1.8 -r1.9
--- INSTALL.gen 15 Apr 2013 23:40:54 -0000 1.8
+++ INSTALL.gen 16 Apr 2013 19:00:44 -0000 1.9
@@ -1,10 +1,10 @@
+This file comes from GNU automake, it shouldn't be changed.
+
Installation Instructions
*************************
-Copyright (C) 1994-1996, 1999-2002, 2004-2013
- Free Software Foundation, Inc.
-
-Last Update: 15 Apr 2013
+Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
+Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
@@ -46,13 +46,9 @@
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You need `configure.ac'
-if you want to change it or regenerate `configure' using a newer
-version of `autoconf'.
-
- You can also use `autoreconf -I m4' which does the same as `autoconf'
-together with some other internal things. For more information about the
usage of `GNU autotools', see the file `IKNSTALL.autotools'.
-
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
The simplest way to compile this package is:
Index: Makefile.in
===================================================================
RCS file: /cvsroot/groff/groff/Makefile.in,v
retrieving revision 1.129
retrieving revision 1.130
diff -u -b -r1.129 -r1.130
--- Makefile.in 15 Apr 2013 23:40:54 -0000 1.129
+++ Makefile.in 16 Apr 2013 19:00:45 -0000 1.130
@@ -484,6 +484,7 @@
"OTHERDEVDIRS=$(OTHERDEVDIRS)" \
"PAGE=$(PAGE)" \
"PERL=$(PERL)" \
+ "PERLVERSION=$(PERLVERSION)" \
"GHOSTSCRIPT=$(GHOSTSCRIPT)" \
"PSPRINT=$(PSPRINT)" \
"PURIFY=$(PURIFY)" \
Index: Makefile.sub
===================================================================
RCS file: /cvsroot/groff/groff/Makefile.sub,v
retrieving revision 1.21
retrieving revision 1.22
diff -u -b -r1.21 -r1.22
--- Makefile.sub 15 Apr 2013 23:40:54 -0000 1.21
+++ Makefile.sub 16 Apr 2013 19:00:46 -0000 1.22
@@ -38,6 +38,7 @@
M4MACROS=\
$(srcdir)/m4/ax_compare_version.m4 \
+ $(srcdir)/m4/ax_prog_perl_version.m4 \
$(srcdir)/m4/codeset.m4 \
$(srcdir)/m4/fcntl-o.m4 \
$(srcdir)/m4/glibc21.m4 \
Index: aclocal.m4
===================================================================
RCS file: /cvsroot/groff/groff/aclocal.m4,v
retrieving revision 1.61
retrieving revision 1.62
diff -u -b -r1.61 -r1.62
--- aclocal.m4 15 Apr 2013 23:40:54 -0000 1.61
+++ aclocal.m4 16 Apr 2013 19:00:46 -0000 1.62
@@ -12,74 +12,8 @@
# PARTICULAR PURPOSE.
m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS],
[])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
-# ===========================================================================
-# http://www.gnu.org/software/autoconf-archive/ax_prog_perl_version.html
-# ===========================================================================
-#
-# SYNOPSIS
-#
-# AX_PROG_PERL_VERSION([VERSION],[ACTION-IF-TRUE],[ACTION-IF-FALSE])
-#
-# DESCRIPTION
-#
-# Makes sure that perl supports the version indicated. If true the shell
-# commands in ACTION-IF-TRUE are executed. If not the shell commands in
-# ACTION-IF-FALSE are run. Note if $PERL is not set (for example by
-# running AC_CHECK_PROG or AC_PATH_PROG) the macro will fail.
-#
-# Example:
-#
-# AC_PATH_PROG([PERL],[perl])
-# AX_PROG_PERL_VERSION([5.8.0],[ ... ],[ ... ])
-#
-# This will check to make sure that the perl you have supports at least
-# version 5.8.0.
-#
-# NOTE: This macro uses the $PERL variable to perform the check.
-# AX_WITH_PERL can be used to set that variable prior to running this
-# macro. The $PERL_VERSION variable will be valorized with the detected
-# version.
-#
-# LICENSE
-#
-# Copyright (c) 2009 Francesco Salvestrini <address@hidden>
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice
-# and this notice are preserved. This file is offered as-is, without any
-# warranty.
-
-#serial 11
-
-AC_DEFUN([AX_PROG_PERL_VERSION],[
- AC_REQUIRE([AC_PROG_SED])
- AC_REQUIRE([AC_PROG_GREP])
-
- AS_IF([test -n "$PERL"],[
- ax_perl_version="$1"
-
- AC_MSG_CHECKING([for perl version])
- changequote(<<,>>)
- perl_version=`$PERL --version 2>&1 | $GREP "This is perl" | $SED -e
's/.* v\([0-9]*\.[0-9]*\.[0-9]*\) .*/\1/'`
- changequote([,])
- AC_MSG_RESULT($perl_version)
-
- AC_SUBST([PERL_VERSION],[$perl_version])
-
- AX_COMPARE_VERSION([$ax_perl_version],[le],[$perl_version],[
- :
- $2
- ],[
- :
- $3
- ])
- ],[
- AC_MSG_WARN([could not find the perl interpreter])
- $3
- ])
-])
-
m4_include([m4/ax_compare_version.m4])
+m4_include([m4/ax_prog_perl_version.m4])
m4_include([m4/codeset.m4])
m4_include([m4/fcntl-o.m4])
m4_include([m4/glibc21.m4])
Index: contrib/glilypond/subs.pl
===================================================================
RCS file: /cvsroot/groff/groff/contrib/glilypond/subs.pl,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -b -r1.2 -r1.3
--- contrib/glilypond/subs.pl 12 Apr 2013 21:45:56 -0000 1.2
+++ contrib/glilypond/subs.pl 16 Apr 2013 19:00:46 -0000 1.3
@@ -427,7 +427,7 @@
my $p = $Globals->{'prog'};
my $usage = EMPTYSTRING;
- $usage = '###### usage:' . "\n" if ( $Args -> { 'verbose' } );
+ $usage = '###### usage:' . "\n" if ( $Args->{'verbose'} );
$usage .= qq*Options for $p:
Read a `roff' file or standard input and transform `lilypond' parts
(everything between `.lilypond start' and `.lilypond end') into
@@ -470,7 +470,7 @@
my $pv = &perl_version();
$usage .= "\n" . 'Perl version ' . $pv . ' needed.' if ( $pv );
- $main::stdout -> print( $usage );
+ $main::stdout->print( $usage );
} # end sub usage()
@@ -486,8 +486,8 @@
my $output = EMPTYSTRING;
$output = "###### version:\n" if ( $Args -> { 'verbose' } );
$output .= "`" . $Globals -> { 'prog' } . "' version `" .
- $Legalese -> { 'version' } . "' of `" .
- $Legalese -> { 'last_update' } . "' is part of `GNU groff'" . $end;
+ $Legalese->{'version'} . "' of `" .
+ $Legalese->{'last_update'} . "' is part of `GNU groff'" . $end;
$stdout -> print( $output );
} # end sub version()
Index: m4/groff.m4
===================================================================
RCS file: /cvsroot/groff/groff/m4/groff.m4,v
retrieving revision 1.13
retrieving revision 1.14
diff -u -b -r1.13 -r1.14
--- m4/groff.m4 15 Apr 2013 15:14:31 -0000 1.13
+++ m4/groff.m4 16 Apr 2013 19:00:47 -0000 1.14
@@ -148,7 +148,6 @@
AC_MSG_WARN([missing program$plural:
The program$plural
-
$missing
cannot be found in the PATH.
Consequently, groff's HTML backend (grohtml) will not work properly;
Index: src/roff/grog/Makefile.sub
===================================================================
RCS file: /cvsroot/groff/groff/src/roff/grog/Makefile.sub,v
retrieving revision 1.16
retrieving revision 1.17
diff -u -b -r1.16 -r1.17
--- src/roff/grog/Makefile.sub 12 Apr 2013 15:14:37 -0000 1.16
+++ src/roff/grog/Makefile.sub 16 Apr 2013 19:00:47 -0000 1.17
@@ -2,9 +2,10 @@
# File position: <groff-source>/src/roff/grog/Makefile.sub
-# Copyright (C) 1993, 2006, 2009, 2013 Free Software Foundation, Inc.
+# Copyright (C) 1993, 2006, 2009, 2013
+# Free Software Foundation, Inc.
-# Last update: 12 Apr 2013
+# Last update: 16 Apr 2013
# This file is part of `grog' which is part of `groff'.
@@ -24,57 +25,64 @@
########################################################################
MAN1=grog.n
-MOSTLYCLEANADD=grog $(MAN1) HAVE_PERL
+MOSTLYCLEANADD=grog $(MAN1)
# not all make programs have $(RM) predefined.
RM=rm -f
all: grog $(MAN1)
-GROG=$(srcdir)/perl_test.pl
-
+# lib .pl-files
+#GROG=$(srcdir)/subs.pl
+GROG=
GROG_=`echo $(GROG) | sed 's|$(srcdir)/||g'`
-grog: grog.pl $(SH_DEPS_SED_SCRIPT)
- -$(RM) -f $@;
- if perl $(srcdir)/perl_test.pl 2>&1 >/dev/null; then \
- : >HAVE_PERL; \
- echo "Perl version works for "$@"'."; \
+
+# Perl version works for all parts of `groff'.
+
+grog: grog.pl $(GROG) $(SH_DEPS_SED_SCRIPT)
+ -$(RM) "$@";
sed -f "$(SH_DEPS_SED_SCRIPT)" \
+ -e "1s|^\(#! \).*perl|\\1$(PERL)|" \
-e "s|@g@|$(g)|g" \
-e "s|@BINDIR@|$(DESTDIR)$(bindir)|g" \
-e "s|@libdir@|$(DESTDIR)$(libdir)|g" \
-e "s|@EGREP@|$(EGREP)|g" \
-e "s|@VERSION@|$(version)$(revision)|" \
-e "$(SH_SCRIPT_SED_CMD)" \
- $(srcdir)/grog.pl >$@; \
- chmod +x $@; \
- else \
- echo "This program "$@" needs a newer version of Perl."; \
- exit 1; \
- fi;
+ $(srcdir)/grog.pl >$@;
+ chmod +x $@;
+
+.PHONY: install_data
install_data: grog
- -test -d $(DESTDIR)$(bindir) || $(mkinstalldirs) $(DESTDIR)$(bindir);
- $(RM) $(DESTDIR)$(bindir)/grog;
- $(INSTALL_SCRIPT) grog $(DESTDIR)$(bindir)/grog;
- -test -d $(DESTDIR)$(grog_dir) \
- || $(mkinstalldirs) $(DESTDIR)$(grog_dir);
- for f in $(GROG_); do \
- $(RM) $(DESTDIR)$(grog_dir)/$$f; \
- done
- if test -f HAVE_PERL; then \
+ -test -d "$(DESTDIR)$(bindir)" || \
+ $(mkinstalldirs) "$(DESTDIR)$(bindir)";
+ -$(RM) "$(DESTDIR)$(bindir)/grog";
+ $(INSTALL_SCRIPT) grog "$(DESTDIR)$(bindir)/grog";
+ -test -d $(DESTDIR)$(grog_dir) || \
+ $(mkinstalldirs) "$(DESTDIR)$(grog_dir)";
+ -$(RM) "$(DESTDIR)$(grog_dir)/grog";
+ $(INSTALL_SCRIPT) "$(srcdir)/grog" "$(DESTDIR)$(grog_dir)/grog";
for f in $(GROG_); do \
- $(INSTALL_SCRIPT) $(srcdir)/$$f $(DESTDIR)$(grog_dir)/$$f; \
- done; \
- fi;
-
-
+ -$(RM) "$(DESTDIR)$(grog_dir)/$$f"; \
+ $(INSTALL_SCRIPT) "$(srcdir)/$$f" "$(DESTDIR)$(grog_dir)/$$f"; \
+ done;
+.PHONY: uninstall_data
uninstall_sub:
- $(RM) $(DESTDIR)$(bindir)/grog
+ -$(RM) "$(DESTDIR)$(bindir)/grog";
for f in $(GROG_); do \
- $(RM) $(DESTDIR)$(grog_dir)/$$f; \
+ -$(RM) "$(DESTDIR)$(grog_dir)/$$f"; \
done;
- -test -d $(DESTDIR)$(libdir)/groff/grog || \
- rmdir $(DESTDIR)$(libdir)/groff/grog;
+ -test -d "$(DESTDIR)$(libdir)/groff/grog" || \
+ -rmdir "$(DESTDIR)$(libdir)/groff/grog";
+
+
+########################################################################
+# Emacs settings
+########################################################################
+#
+# Local Variables:
+# mode: makefile
+# End:
Index: INSTALL.CVS
===================================================================
RCS file: INSTALL.CVS
diff -N INSTALL.CVS
--- /dev/null 1 Jan 1970 00:00:00 -0000
+++ INSTALL.CVS 16 Apr 2013 19:00:43 -0000 1.1
@@ -0,0 +1,69 @@
+ Copyright 2013
+ Free Software Foundation, Inc.
+
+ Last Update: 16 Apr 2013
+
+ Copying and distribution of this file, with or without modification,
+ are permitted in any medium without royalty provided the copyright
+ notice and this notice are preserved.
+
+This file contains information that supplements the generic
+installation instructions in file `INSTALL.autotools'.
+
+
+If you want to start compiling the `groff' system with an existing
+script `configure' you won't need the information ion this file.
+
+
+But if you want to use the `GNU autotools' (`aclocal', `autoreconf')
+for creating the following and some more files:
+
+ aclocal.m4
+ configure
+ Makefile
+
+
+To change the file `aclocal.m4', run the shell command
+
+ $ aclocal -I m4
+
+
+To recreate the files `configure' and `Makefile', use the shell command
+
+ $ autoreconf -I m4
+
+
+The option `-I m4' is necessary. It refers to the subdirectory `m4'
+that has files with m4 macro definitions that are needed by the
+`autotools'.
+
+
+If you use an old `autoreconf' version < 2.69, there might be an
+error warning like:
+
+ /usr/share/aclocal/gtkglextmm-1.2.m4:225: warning: underquoted \
+definition of AC_GTKGLEXTMM_SUPPORTS_MULTIHEAD
+ /usr/share/aclocal/gtkglextmm-1.2.m4:225: run info \
+'(automake)Extending aclocal'
+ /usr/share/aclocal/gtkglextmm-1.2.m4:225: or see \
+http://www.gnu.org/software/automake/manual/automake.html#Extending-aclocal
+
+Just ignore this. It doesn't occur in the actual versions of `autoreconf'.
+
+
+You may even use the shell command
+
+ $ autoconf
+
+instead of `autoreconf', but that will ignore some features. So
+`autoreconf' is better.
+
+
+`automake' is not used. `autoreconf' does part of this. If you know
+about creating `Makefile.am' files we are glad to have you for the
+inclusion of `automake'. Take contact with the `groff Mailinglist'.
+
+
+After the use of the `GNU autotools', the usual compilation should
+work. If the run of `configure' produces error reports you have
+produced errors in the `autotools' modification.
Index: m4/ax_prog_perl_version.m4
===================================================================
RCS file: m4/ax_prog_perl_version.m4
diff -N m4/ax_prog_perl_version.m4
--- /dev/null 1 Jan 1970 00:00:00 -0000
+++ m4/ax_prog_perl_version.m4 16 Apr 2013 19:00:46 -0000 1.1
@@ -0,0 +1,66 @@
+# ===========================================================================
+# http://www.gnu.org/software/autoconf-archive/ax_prog_perl_version.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# AX_PROG_PERL_VERSION([VERSION],[ACTION-IF-TRUE],[ACTION-IF-FALSE])
+#
+# DESCRIPTION
+#
+# Makes sure that perl supports the version indicated. If true the shell
+# commands in ACTION-IF-TRUE are executed. If not the shell commands in
+# ACTION-IF-FALSE are run. Note if $PERL is not set (for example by
+# running AC_CHECK_PROG or AC_PATH_PROG) the macro will fail.
+#
+# Example:
+#
+# AC_PATH_PROG([PERL],[perl])
+# AX_PROG_PERL_VERSION([5.8.0],[ ... ],[ ... ])
+#
+# This will check to make sure that the perl you have supports at least
+# version 5.8.0.
+#
+# NOTE: This macro uses the $PERL variable to perform the check.
+# AX_WITH_PERL can be used to set that variable prior to running this
+# macro. The $PERL_VERSION variable will be valorized with the detected
+# version.
+#
+# LICENSE
+#
+# Copyright (c) 2009 Francesco Salvestrini <address@hidden>
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice
+# and this notice are preserved. This file is offered as-is, without any
+# warranty.
+
+#serial 11
+
+AC_DEFUN([AX_PROG_PERL_VERSION],[
+ AC_REQUIRE([AC_PROG_SED])
+ AC_REQUIRE([AC_PROG_GREP])
+
+ AS_IF([test -n "$PERL"],[
+ ax_perl_version="$1"
+
+ AC_MSG_CHECKING([for perl version])
+ changequote(<<,>>)
+ perl_version=`$PERL --version 2>&1 | $GREP "This is perl" | $SED -e
's/.* v\([0-9]*\.[0-9]*\.[0-9]*\) .*/\1/'`
+ changequote([,])
+ AC_MSG_RESULT($perl_version)
+
+ AC_SUBST([PERL_VERSION],[$perl_version])
+
+ AX_COMPARE_VERSION([$ax_perl_version],[le],[$perl_version],[
+ :
+ $2
+ ],[
+ :
+ $3
+ ])
+ ],[
+ AC_MSG_WARN([could not find the perl interpreter])
+ $3
+ ])
+])
Index: INSTALL.autotools
===================================================================
RCS file: INSTALL.autotools
diff -N INSTALL.autotools
--- INSTALL.autotools 15 Apr 2013 23:40:54 -0000 1.1
+++ /dev/null 1 Jan 1970 00:00:00 -0000
@@ -1,69 +0,0 @@
- Copyright 2013
- Free Software Foundation, Inc.
-
- Last Update: 16 Apr 2013
-
- Copying and distribution of this file, with or without modification,
- are permitted in any medium without royalty provided the copyright
- notice and this notice are preserved.
-
-This file contains information that supplements the generic
-installation instructions in file `INSTALL.autotools'.
-
-
-If you want to start compiling the `groff' system with an existing
-script `configure' you won't need the information ion this file.
-
-
-But if you want to use the `GNU autotools' (`aclocal', `autoreconf')
-for creating the following and some more files:
-
- aclocal.m4
- configure
- Makefile
-
-
-To change the file `aclocal.m4', run the shell command
-
- $ aclocal -I m4
-
-
-To recreate the files `configure' and `Makefile', use the shell command
-
- $ autoreconf -I m4
-
-
-The option `-I m4' is necessary. It refers to the subdirectory `m4'
-that has files with m4 macro definitions that are needed by the
-`autotools'.
-
-
-If you use an old `autoreconf' version < 2.69, there might be an
-error warning like:
-
- /usr/share/aclocal/gtkglextmm-1.2.m4:225: warning: underquoted \
-definition of AC_GTKGLEXTMM_SUPPORTS_MULTIHEAD
- /usr/share/aclocal/gtkglextmm-1.2.m4:225: run info \
-'(automake)Extending aclocal'
- /usr/share/aclocal/gtkglextmm-1.2.m4:225: or see \
-http://www.gnu.org/software/automake/manual/automake.html#Extending-aclocal
-
-Just ignore this. It doesn't occur in the actual versions of `autoreconf'.
-
-
-You may even use the shell command
-
- $ autoconf
-
-instead of `autoreconf', but that will ignore some features. So
-`autoreconf' is better.
-
-
-`automake' is not used. `autoreconf' does part of this. If you know
-about creating `Makefile.am' files we are glad to have you for the
-inclusion of `automake'. Take contact with the `groff Mailinglist'.
-
-
-After the use of the `GNU autotools', the usual compilation should
-work. If the run of `configure' produces error reports you have
-produced errors in the `autotools' modification.