Re: ✘gpsd .23.2~rc1

[Ralph Nemitz]

Hi Gary,

 I did another test at my embedded system and had nearly the same 
strange output like Florian.

Regards,

Ralph

Am 12.04.22 um 12:53 schrieb Florian Kiera:
> Yo Gary!
>
> I tested "www/gpsd-client-example-code.adoc" example client on both 
> named versions (3.21**and 3.23.2~rc-1). I added an output in "line 56":
>
> printf("Satellites used: %d\n", gps_data.satellites_used);
>
> and experienced different outcomes. In 3.21 every time the cycle is 
> completed this output gives a valid value (>0). In 3.23.2~rc-1 only 
> every 3rd message gives a "valid" (>0) value for satellites used. Is 
> this intented?
>
> Just checked 3.22 too, works the same as 3.21.
>
> Regards Florian
> **
>
> Am 11.04.22 um 20:46 schrieb Gary E. Miller:
> > Yo Ralph!
> >
> > On Mon, 11 Apr 2022 09:11:44 +0200
> > Ralph Nemitz<nemitz@logicway.de>  wrote:
> >
> > > the data.raw file is attached. After "gpsdecode < data.raw" I saw
> > > values at nSat and uSat which are corresponding to cgps but in struct
> > > gps_data_t are no satellites_visible and satellites_used.
> > Looks good to me.  The JSON shows the used /seensats and cgps does too
> > My guess is you are checking for used and seen on reading a TPV insetad
> > of reading a SKY.
> >
> > I can't debug your code w/o seeing your code.
> >
> >
> > RGDS
> > GARY
> > --------------------------------------------------------------------------- 
> >
> > Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
> >     gem@rellim.com   Tel:+1  541 382 8588
> >
> >         Veritas liberabit vos. -- Quid est veritas?
> >      "If you can't measure it, you can't improve it." - Lord Kelvin
--

--
###############################################################
Dipl.-Phys. Ralph Nemitz    Tel.:    (0385) 3993 9354
Logic Way GmbH              Fax:     (0385) 3993 458
Hagenower Strasse 73        HTTP:    http://www.logicway.de
19061 Schwerin              E-Mail:  nemitz@logicway.de
###############################################################

out.txt
Description: Text document

test.c
Description: Text Data