[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Changing Between Baud Rates on a uBlox Receiver without Programmable
|
From: |
Gary E. Miller |
|
Subject: |
Re: Changing Between Baud Rates on a uBlox Receiver without Programmable Flash Memory |
|
Date: |
Tue, 11 Jan 2022 20:03:44 -0800 |
Yo Joshua!
On Tue, 11 Jan 2022 22:50:52 -0500
Joshua Quesenberry <engnfrc@gmail.com> wrote:
> I frequently have to work with uBlox receivers lacking programmable
> flash memory and I'm wondering what mechanisms (if any) GPSd has
> available to switch from the default baud rate of 9600 (or sometimes
> 38400) to a higher baud rate. Once configured a system would use the
> higher baud rate across reboots unless there's a full power cycle, at
> which time the default baud rate is present. I know GPSd does
> auto-bauding, but I think that would only get me to the 9600 baud
> rate?
Have you read the gpsd, gpsctl and ubtool man pages?
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
gem@rellim.com Tel:+1 541 382 8588
Veritas liberabit vos. -- Quid est veritas?
"If you can't measure it, you can't improve it." - Lord Kelvin
pgpYGwZ1HdOGp.pgp
Description: OpenPGP digital signature