[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: open SHM data only after cgps start
From: |
Gary E. Miller |
Subject: |
Re: open SHM data only after cgps start |
Date: |
Fri, 5 Feb 2021 13:34:47 -0800 |
Yo Hans!
On Fri, 5 Feb 2021 20:12:39 +0100
Hans Kurscheidt <lve0200@gmail.com> wrote:
> not so clear:
Welcome to my world. :-)
> Always fresh boot:
>
> w/ "-n" in /etc/default/gpsd
>
> Welcome to Debian Stretch with Armbian Linux 4.19.62-sunxi
> System load: 0.69 0.22 0.08 Up time: 0 min
> Memory usage: 16 % of 492MB IP: 192.168.1.22
> 192.168.100.1 CPU temp: 53°C
> Usage of /: 19% of 29G
>
> [ 0 security updates available, 2 updates total: apt upgrade ]
> Last check: 2021-02-05 20:04
>
> [ General system configuration (beta): armbian-config ]
>
> Last login: Fri Feb 5 19:35:38 2021 from 192.168.1.31
>
> hk@orangepizero:~$ systemctl status gpsd
> ● gpsd.service - GPS (Global Positioning System) Daemon
> Loaded: loaded (/etc/systemd/system/gpsd.service; enabled; vendor
> preset: enabled)
> Active: active (running) since Fri 2021-02-05 20:04:03 CET; 53s
> ago Main PID: 718 (gpsd)
> Tasks: 2 (limit: 4915)
> CGroup: /system.slice/gpsd.service
> └─718 /usr/sbin/gpsd -N -n /dev/ttyACM0
As I do not know systmed(rizzle), I can't comment intelligently on that.
> Feb 05 20:04:03 orangepizero systemd[1]: Started GPS (Global
> Positioning System) Daemon.
> hk@orangepizero:~$ ps -ef | grep gpsd
> nobody 718 1 0 20:04 ? 00:00:00 /usr/sbin/gpsd -N -n
> /dev/ttyACM0
> hk 1673 1619 0 20:05 pts/0 00:00:00 grep gpsd
So gpsd is running.
> ----------------------------
>
> w/out "-n" in /etc/default/gpsd
>
> Welcome to Debian Stretch with Armbian Linux 4.19.62-sunxi
> System load: 0.90 0.34 0.12 Up time: 1 min
> Memory usage: 16 % of 492MB IP: 192.168.1.22
> 192.168.100.1 CPU temp: 50°C
> Usage of /: 19% of 29G
>
> [ 0 security updates available, 2 updates total: apt upgrade ]
> Last check: 2021-02-05 20:07
>
> [ General system configuration (beta): armbian-config ]
>
> Last login: Fri Feb 5 20:04:43 2021 from 192.168.1.31
>
> hk@orangepizero:~$ systemctl status gpsd
> ● gpsd.service - GPS (Global Positioning System) Daemon
> Loaded: loaded (/etc/systemd/system/gpsd.service; enabled; vendor
> preset: enabled)
> Active: active (running) since Fri 2021-02-05 20:07:32 CET; 1min
> 2s ago Main PID: 702 (gpsd)
> Tasks: 1 (limit: 4915)
> CGroup: /system.slice/gpsd.service
> └─702 /usr/sbin/gpsd -N /dev/ttyACM0
>
> Feb 05 20:07:32 orangepizero systemd[1]: Started GPS (Global
> Positioning System) Daemon.
> hk@orangepizero:~$ ps -ef | grep gpsd
> nobody 702 1 0 20:07 ? 00:00:00 /usr/sbin/gpsd -N
> /dev/ttyACM0
> hk 1655 1621 0 20:08 pts/0 00:00:00 grep gpsd
That looks right to me.
> ??
What does not look correct to you?
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
gem@rellim.com Tel:+1 541 382 8588
Veritas liberabit vos. -- Quid est veritas?
"If you can't measure it, you can't improve it." - Lord Kelvin
pgpe5B7_mL9rT.pgp
Description: OpenPGP digital signature
- open SHM data only after cgps start, (continued)
- open SHM data only after cgps start, Hans Kurscheidt, 2021/02/05
- open SHM data only after cgps start, Hans Kurscheidt, 2021/02/05
- Re: open SHM data only after cgps start, Frank Nicholas, 2021/02/05
- Re: open SHM data only after cgps start, Gary E. Miller, 2021/02/05
- Re: open SHM data only after cgps start, Hans Kurscheidt, 2021/02/05
- Re: open SHM data only after cgps start, Frank Nicholas, 2021/02/05
- Re: open SHM data only after cgps start, Hans Kurscheidt, 2021/02/05
- Re: open SHM data only after cgps start, Frank Nicholas, 2021/02/05
- Re: open SHM data only after cgps start, Hans Kurscheidt, 2021/02/05
- Re: open SHM data only after cgps start,
Gary E. Miller <=
- Re: open SHM data only after cgps start, Hans Kurscheidt, 2021/02/06
- Re: open SHM data only after cgps start, shouldbe q931, 2021/02/06
- Re: open SHM data only after cgps start, Hans Kurscheidt, 2021/02/06
- Re: open SHM data only after cgps start, shouldbe q931, 2021/02/06
- Re: open SHM data only after cgps start, Gary E. Miller, 2021/02/06
- Re: open SHM data only after cgps start, shouldbe q931, 2021/02/07
- Re: open SHM data only after cgps start, Frank Nicholas, 2021/02/07
- Re: open SHM data only after cgps start, Gary E. Miller, 2021/02/07
- Re: open SHM data only after cgps start, Gary E. Miller, 2021/02/05
open SHM data only after cgps start, Hans Kurscheidt, 2021/02/05