[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gpsd-users] Where should I start from?
|
From: |
Gary E. Miller |
|
Subject: |
Re: [gpsd-users] Where should I start from? |
|
Date: |
Wed, 3 Jul 2019 19:19:33 -0700 |
Yo raaj!
On Thu, 4 Jul 2019 08:44:58 +0800
raaj lokanathan <address@hidden> wrote:
> Does gpsd supports AT command?
You have the source. That is what grep is for.
A quick look does not show any driver using them.
> Are there any sample code for the AT command in gpsd?
Looks not. But sending commands to the GPS is the easiest part.
There are several examples of how to send: contib/motosend.c and
contrib/ashctl.c
> How can I
> implement the soft driver with the AT command for the gnss module?
Look at the other drivers. That is the easy part.
But first you need to send us the module documentation and sample output.
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
address@hidden Tel:+1 541 382 8588
Veritas liberabit vos. -- Quid est veritas?
"If you can’t measure it, you can’t improve it." - Lord Kelvin
pgpBRJBFZo5kI.pgp
Description: OpenPGP digital signature