gpsd-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[gpsd-users] gpsd interfacing to SIM868 based Raspberry PI hat.


From: Thomas Schweikle
Subject: [gpsd-users] gpsd interfacing to SIM868 based Raspberry PI hat.
Date: Tue, 7 May 2019 12:26:22 +0200

Hi!

Configuration:
- Raspberry PI HAT based on SIM868 set to communicate with GPIO serial port
- Raspberry PI 2B+ GPIO set to serial, no console 8N1 at 115200baud

Hardware works. Can switch "on" this board. After sending

echo "ATE0" > /dev/ttyAMD0
echo "AT+CGNSPWR=1" > /dev/ttyAMA0

PPS LED turns blinking 1s pulses after about 28s. GPIO pin 18 is pulled every second.

# cat < /dev/ttyAMA0

does not give back anything.
Starting gpsd with

# gpsd -N /dev/ttyAMA0

starts gpsd running as user gpsd. But it does not lead to nothing. gpsd is just started nothing else happens. Seems to wait on data on /dev/ttyAMA0.

Any idea how to initialize the SIM868 based board to make it work with gpsd?

--
Thomas

reply via email to

[Prev in Thread] Current Thread [Next in Thread]