[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gpsd-users] Coding Question
From: |
Gary E. Miller |
Subject: |
Re: [gpsd-users] Coding Question |
Date: |
Tue, 5 Feb 2019 15:59:06 -0800 |
Yo Roland!
On Tue, 5 Feb 2019 15:40:46 -0800
Roland Oswald <address@hidden> wrote:
> yeah, the RTCM is RTCM3.
And which messages in RTCM3?
And what version of NTRIP? 1.0 or 2.0?
> I just looked up what RTFM means.
Not all agree on what it means...
> Hopefully I understand what the ubxtool manual is saying.
You will not, until you understand the u-blox doc:
u-blox8-M8_ReceiverDescrProtSpec_(UBX-13003221).pdf
Starting with Section 26, RTK Mode Configuration. Then backup and read
sections 1 to 7.
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
address@hidden Tel:+1 541 382 8588
Veritas liberabit vos. -- Quid est veritas?
"If you can’t measure it, you can’t improve it." - Lord Kelvin
pgpDA9Tmx31Gl.pgp
Description: OpenPGP digital signature
- [gpsd-users] Coding Question, Roland Oswald, 2019/02/04
- Re: [gpsd-users] Coding Question, Gary E. Miller, 2019/02/05
- Message not available
- Re: [gpsd-users] Coding Question, Gary E. Miller, 2019/02/05
- Message not available
- Re: [gpsd-users] Coding Question, Gary E. Miller, 2019/02/05
- Message not available
- Re: [gpsd-users] Coding Question, Gary E. Miller, 2019/02/05
- Message not available
- Re: [gpsd-users] Coding Question, Gary E. Miller, 2019/02/05
- Message not available
- Re: [gpsd-users] Coding Question,
Gary E. Miller <=
- Message not available
- Re: [gpsd-users] Coding Question, Gary E. Miller, 2019/02/05
- Message not available
- Re: [gpsd-users] Coding Question, Gary E. Miller, 2019/02/06
- Message not available
- Re: [gpsd-users] Coding Question, Gary E. Miller, 2019/02/05