Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO

[Charles Muggen]

I cloned the micro SD card and moved to another Raspi 3.
I ran sudo -s, so now I'm root.

I ran ./gpsd/gpsd -n /dev/gpsd0
I get good, clean NMEA messages and PPS bars.

But then I ran ntpq -p
I get the following.
I seem to have lost everything.


     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
 0.debian.pool.n .POOL.          16 p    -   64    0    0.000    0.000   0.001
 1.debian.pool.n .POOL.          16 p    -   64    0    0.000    0.000   0.001
 2.debian.pool.n .POOL.          16 p    -   64    0    0.000    0.000   0.001
 3.debian.pool.n .POOL.          16 p    -   64    0    0.000    0.000   0.001
 SHM(2)          .SHM.            0 l    -   64    0    0.000    0.000   0.000



> Sent: Thursday, February 08, 2018 at 4:41 PM
> From: "Gary E. Miller" <address@hidden>
> To: address@hidden
> Subject: Re: [gpsd-users] problem with Stratum-1-Microserver HOWTO
>
> Yo Charles!
> 
> On Thu, 8 Feb 2018 22:24:19 +0100
> "Charles Muggen" <address@hidden> wrote:
> 
> > but if I run ntpshmmon using:
> >   sudo ./gpsd/gpsd /dev/gpsd0
> >   sudo ./gpsd/ntpshmmon
> 
> You forgot the -n argument to gpsd.  You should be root and type:
>       ./gpsd/gpsd -n /dev/gpsd0
> 
> Stop the sudo stuff, it just causes problems.
> 
> RGDS
> GARY
> ---------------------------------------------------------------------------
> Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
>       address@hidden  Tel:+1 541 382 8588
> 
>           Veritas liberabit vos. -- Quid est veritas?
>     "If you can’t measure it, you can’t improve it." - Lord Kelvin
>