gpsd-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[gpsd-users] ntpd fails to synch


From: Kohan, Rabie S (US)
Subject: [gpsd-users] ntpd fails to synch
Date: Mon, 8 May 2017 21:11:12 +0000

Hello,
I am running gpsd without PPS, using only segment 0 (NTP0).

Issue:
gpsd writes to the shared memory, ntpd attaches to the shared memory, however, 
it fails to synch.

gpsd version -  3.17
OS - Linux
ntpd version - 4.2.6p5
GPS source - using Rockwell Defense Advanced GPS Receiver, transmitting 
NMEA0183 messages to the host serial port #0 


ntp.conf:
server 127.127.28.0 # minpoll 4 maxpoll 4 
fudge 127.127.28.0 time1 0.535 refid GPS

ipcm -m :
------ Shared Memory Segments --------
key        shmid      owner      perms      bytes      nattch     status
0x4e545030 0                root       600        96           2
0x4e545031 32769      root       600        96            1
0x4e545032 65538      root       666        96            1
0x4e545033 98307      root       666        96            1
0x4e545034 131076     root       666        96          1
0x4e545035 163845     root       666        96          1
0x4e545036 196614     root       666        96          1
0x4e545037 229383     root       666        96          1
0x00003487 262152     kohanrs    666        16384      0

ntpq -p:
    remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
 SHM(0)          .GPS.            0 l    -   64    0    0.000    0.000   0.000


ntpshmmon version 1
#      Name   Seen@                Clock                Real               L 
Prec
sample NTP0 1494277387.944710290 1494277387.944531342 1494252187.000000000 0 -20
sample NTP0 1494277388.943110679 1494277388.942423863 1494252188.000000000 0 -20
sample NTP0 1494277389.943376046 1494277389.942866396 1494252189.000000000 0 -20
sample NTP0 1494277390.945270833 1494277390.945073224 1494252190.000000000 0 -20
sample NTP0 1494277391.944673410 1494277391.943928826 1494252191.000000000 0 -20
sample NTP0 1494277392.943927691 1494277392.943768819 1494252192.000000000 0 -20
sample NTP0 1494277393.946317499 1494277393.946173884 1494252193.000000000 0 -20
sample NTP0 1494277394.944482589 1494277394.943591779 1494252194.000000000 0 -20
sample NTP0 1494277395.944159131 1494277395.944012477 1494252195.000000000 0 -20


Any recommendation is appreciated.

Rabie



-----Original Message-----
From: Gary E. Miller [mailto:address@hidden 
Sent: Thursday, May 04, 2017 10:50 PM
To: Kohan, Rabie S (US) <address@hidden>
Cc: address@hidden
Subject: Re: [gpsd-users] Posting messages

Yo Rabie S (US)!

On Thu, 4 May 2017 17:42:04 +0000
"Kohan, Rabie S (US)" <address@hidden> wrote:

> Would you explain the procedure for posting messages to gpsd users?

Send an email to the list.  Just be on topic.

RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        address@hidden  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can’t measure it, you can’t improve it." - Lord Kelvin

reply via email to

[Prev in Thread] Current Thread [Next in Thread]