[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gpsd-users] gpsd not capturing device on startup
|
From: |
Joshua Quesenberry |
|
Subject: |
Re: [gpsd-users] gpsd not capturing device on startup |
|
Date: |
Tue, 15 Nov 2016 14:29:16 -0500 |
After rebooting the machine, I see that gpsd is running with the options I
gave it, but I'm unable to get data from the GPS. If I run cgps it
immediately returns with "GPS hung up." If I power cycle the GPS everything
starts working fine until I reboot again. Any idea what causes this? How to
fix it?
Thanks,
JQ
-----Original Message-----
From: Gary E. Miller [mailto:address@hidden
Sent: Tuesday, November 15, 2016 2:12 PM
To: Joshua Quesenberry <address@hidden>
Cc: address@hidden
Subject: Re: [gpsd-users] gpsd not capturing device on startup
Yo Joshua!
On Tue, 15 Nov 2016 13:57:22 -0500
"Joshua Quesenberry" <address@hidden> wrote:
> Is running `/usr/sbin/gpsd` sufficient for it to auto-magic everything
> else? Or do I need to run it like `/usr/sbin/gpsd -N -n -F
> /var/run/gpsd.sock /dev/ttyACM0` ? I read that it can dynamically
> add/remove devices?
My preferred way to run gpsd is: gpsd -n /dev/ttyUSB0
Others will run gpsd other ways.
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
address@hidden Tel:+1 541 382 8588