[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[gpsd-users] gpspipe switch to block non-NMEA output?
From: |
Bo Berglund |
Subject: |
[gpsd-users] gpspipe switch to block non-NMEA output? |
Date: |
Wed, 09 Mar 2016 08:49:41 +0100 |
When I run gpspipe -r I get this output:
gpspipe -r
{"class":"VERSION","release":"3.16","rev":"3.16","proto_major":3,"proto_minor":11}
{"class":"DEVICES","devices":[{"class":"DEVICE","path":"/dev/ttyUSB0","driver":"SiRF","subtype":"GSW3.2.4_3.1.00.12-SDK003P1.00a
","activated":"2016-03-09T07:46:02.598Z","flags":1,"native":1,"bps":4800,"parity":"N","stopbits":1,"cycle":1.00}]}
{"class":"WATCH","enable":true,"json":false,"nmea":true,"raw":0,"scaled":false,"timing":false,"split24":false,"pps":false}
$GPGSV,2,1,06,23,75,111,35,09,62,229,30,02,28,309,28,19,06,250,14*7B
$GPGSV,2,2,06,06,50,256,23,03,33,124,24*7E
>From now on only NMEA sentences are shown.
Is there any (undocumented) switch to block the leading "class" lines
from being output?
I have looked in man gpspipe but found nothing that does this, at
least not by what I understand from the descriptions.
--
Bo Berglund
Developer in Sweden
- [gpsd-users] gpspipe switch to block non-NMEA output?,
Bo Berglund <=