Re: [gpsd-users] gps source detection problem (GNS1301 receiver, serial port, gpsd 3.15 and current git, ARM cortex A8)

[Arndt Kritzner]

Hi Gary,

Am 01.10.2015 um 22:54 schrieb Gary E. Miller:
> Yo Arndt!
> 
> On Thu, 1 Oct 2015 22:21:58 +0200
> Arndt Kritzner <address@hidden> wrote:
> 
>> because gpsd's may be oversophisticated autodetection
>> magic didn't work on my UART. It was endlessly trying UART settings.
> 
> If you set the port properly before starting gpsd then you avoid
> the lengthy autobaud sequence.  You can also compile gpsd for
> just the GPS you are using to avoid trying to probe for GPS you
> do not support.

this is what I did. In my case the autobaud sequence never succeeds (at least 
not for some hours).

> 
>> For the moment I went back to gpsd 2.96 that does receive UART
>> correctly.
> 
> I can't count the number of known bugs in 2.96, going back is not a good
> thing.
> 
> 

Ok. As soon as I get a current gpsd to work I will change back to it.

Kind regards
Arndt
-- 

--
###############################################################
Dipl. Ing Arndt Kritzner    Tel:    (0385) 3993 448
Logic Way GmbH              Fax:    (0385) 3993 458
Hagenower Strasse 73        HTTP:   http://www.logicway.de
19061 Schwerin              email:  mailto:address@hidden
###############################################################