[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gpsd-users] control ublox-M8 by gpsctl
|
From: |
Gary E. Miller |
|
Subject: |
Re: [gpsd-users] control ublox-M8 by gpsctl |
|
Date: |
Wed, 1 Apr 2015 12:50:41 -0700 |
Yo Yunchuan!
On Wed, 01 Apr 2015 12:55:08 +0300
Yunchuan Geng <address@hidden> wrote:
> gpsctl -t "u-blox" -b -D 5 -x '\x06\x3E\x00\x00' /dev/ttymxc2
I playedd with this a bit, on 3.15-dev.
-x requires direct access, so I was wrong to say start gpsd first.
-t is not required, auto detect works fine.o
I ended up with this string:
gpsctl -D 5 -x "\xB5\x62\x06\x04\x04\x00\xFF\x87\x00\x00\x94\xF5" /dev/ttymxc2
Which works just fine at sending the hex string to the GPS.
Sadly it never waits for the answer...
Not sure how to fix it, but solving the generic configuration dump
problem is on my list.
Patches welcome, keep at it.
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97701
address@hidden Tel:+1(541)382-8588