I just downloaded and installed 3.10 manually. I'm using an older Trimble (trying to get minicom to give me a coherent output so I can ask exactly what it is... I guess I'll bring home an Ashtech or another Trimble (or dig out the older PVT6...) to get something more identifiable.
ANYWAY, I've started gpsd with /dev/ttyUSB0, and then attempted to run gpsmon, and got the following:
gpsd://localhost:2947 JSON slave driver>
(81) {"class":"VERSION","release":"3.10","rev":"3.10","proto_major":3,"proto_minor":9}
(172) {"class":"DEVICES","devices":[{"class":"DEVICE","path":"/dev/ttyUSB0","activated":"2013-11-25T04:41:21.677Z","native":0,"bps":4800,"parity":"N","stopbits":1,"cycle":1.00}]}
(122) {"class":"WATCH","enable":true,"json":false,"nmea":false,"raw":2,"scaled":false,"timing":false,"split24":false,"pps":true}
In fact, this is a change from a bit earlier, where it was claiming to have found TSIP at 38400, but claimed a TSIP driver failure.
Dare I ask what I'm doing wrong?
Thanks, gerry
--
Gerry Creager
NSSL/CIMMS
405.325.6371
++++++++++++++++++++++
“Big whorls have little whorls,
That feed on their velocity;
And little whorls have lesser whorls,
And so on to viscosity.”
Lewis Fry Richardson (1881-1953)