[taler-sandcastle-ng] 25/39: sandcastle-ng: add support for config overrides

[gnunet]

This is an automated email from the git hooks/post-receive script.

devan-carpenter pushed a commit to branch master
in repository sandcastle-ng.

commit d9f796dce76ef5f5f5da7fcbc4d0597268278c77
Author: Devan Carpenter <devan@taler.net>
AuthorDate: Tue Dec 5 16:49:51 2023 -0500

    sandcastle-ng: add support for config overrides
---
 sandcastle-run                   |   7 +
 scripts/demo/setup-sandcastle.sh |   9 +-
 scripts/test/setup-sandcastle.sh | 511 ---------------------------------------
 3 files changed, 14 insertions(+), 513 deletions(-)

diff --git a/sandcastle-run b/sandcastle-run
index ee98e18..7b5ccd1 100755
--- a/sandcastle-run
+++ b/sandcastle-run
@@ -36,6 +36,11 @@ fi
 # We need to be careful with SELinux when using volume mounts, relabel!
 
 SETUP_NAME=${SANDCASTLE_SETUP_NAME:-demo}
+if [[ ! -z "${SANDCASTLE_OVERRIDE_NAME:-}" ]]; then
+       OVERRIDES="-v $PWD/overrides/${SANDCASTLE_OVERRIDE_NAME}:/overrides:Z"
+else
+       OVERRIDES=""
+fi
 
 podman run \
   -d \
@@ -49,7 +54,9 @@ podman run \
   -p=$SANDCASTLE_PORT_BANK_SPA:$PORT_INTERNAL_BANK_SPA \
   --name taler-sandcastle \
   --systemd=always \
+  --env "SANDCASTLE_OVERRIDE_NAME=${SANDCASTLE_OVERRIDE_NAME:=none}" \
   -v talerdata:/talerdata:Z \
+  $OVERRIDES \
   -v $PWD/scripts:/scripts:Z \
   -v $PWD/scripts/$SETUP_NAME:/provision:Z \
   --entrypoint /sbin/init \
diff --git a/scripts/demo/setup-sandcastle.sh b/scripts/demo/setup-sandcastle.sh
index 517690d..93691a5 100755
--- a/scripts/demo/setup-sandcastle.sh
+++ b/scripts/demo/setup-sandcastle.sh
@@ -20,7 +20,12 @@ echo "Provisioning sandcastle"
 # General configuration.
 # Might eventually be moved to an external file.
 
-CURRENCY=KUDOS
+# Source any ovverrides from external file
+if [[ "${SANDCASTLE_OVERRIDE_NAME:-}" != "none" ]]; then
+       cat /overrides
+       source "/overrides" || true
+fi
+CURRENCY=${CURRENCY:="KUDOS"}
 EXCHANGE_IBAN=DE159593
 EXCHANGE_PLAIN_PAYTO=payto://iban/$EXCHANGE_IBAN
 
EXCHANGE_FULL_PAYTO="payto://iban/$EXCHANGE_IBAN?receiver-name=Sandcastle+Echange+Inc"
@@ -35,7 +40,7 @@ MERCHANT_IBAN_TALER=DE1740597
 MERCHANT_IBAN_TOR=DE2648777
 MERCHANT_IBAN_SURVEY=DE0793060
 
-MYDOMAIN=demo.taler.net
+MYDOMAIN=${MYDOMAIN:="demo.taler.net"}
 LANDING_DOMAIN=$MYDOMAIN
 BANK_DOMAIN=bank.$MYDOMAIN
 EXCHANGE_DOMAIN=exchange.$MYDOMAIN
diff --git a/scripts/test/setup-sandcastle.sh b/scripts/test/setup-sandcastle.sh
deleted file mode 100755
index 00f30a9..0000000
--- a/scripts/test/setup-sandcastle.sh
+++ /dev/null
@@ -1,511 +0,0 @@
-#!/usr/bin/env bash
-
-# This scripts provisions all configuration and
-# services for the Taler sandcastle container.
-#
-# Important: This script needs to be completely
-# idempotent, nothing must break if it is executed
-# multiple times.
-
-set -eu
-set -x
-
-if [[ ! -z "${SANDCASTLE_SKIP_SETUP:-}" ]]; then
-  echo "skipping sandcastle setup, requested by environment var 
SANDCASTLE_SKIP_SETUP"
-  exit 1
-fi
-
-echo "Provisioning sandcastle"
-
-# General configuration.
-# Might eventually be moved to an external file.
-
-CURRENCY=TESTKUDOS
-EXCHANGE_IBAN=DE159593
-EXCHANGE_PLAIN_PAYTO=payto://iban/$EXCHANGE_IBAN
-EXCHANGE_FULL_PAYTO="payto://iban/$EXCHANGE_IBAN?receiver-name=Sandcastle+Echange+Inc"
-EXCHANGE_BANK_PASSWORD=sandbox
-
-# Randomly generated IBANs for the merchants
-MERCHANT_IBAN_DEFAULT=DE5135717
-MERCHANT_IBAN_POS=DE4218710
-MERCHANT_IBAN_BLOG=DE8292195
-MERCHANT_IBAN_GNUNET=DE9709960
-MERCHANT_IBAN_TALER=DE1740597
-MERCHANT_IBAN_TOR=DE2648777
-MERCHANT_IBAN_SURVEY=DE0793060
-
-MYDOMAIN=test.taler.net
-LANDING_DOMAIN=$MYDOMAIN
-BANK_DOMAIN=bank.$MYDOMAIN
-EXCHANGE_DOMAIN=exchange.$MYDOMAIN
-MERCHANT_DOMAIN=backend.$MYDOMAIN
-BLOG_DOMAIN=shop.$MYDOMAIN
-DONATIONS_DOMAIN=donations.$MYDOMAIN
-SURVEY_DOMAIN=survey.$MYDOMAIN
-
-# Ports of the services running inside the container.
-# Should be synchronized with the sandcastle-run script.
-PORT_INTERNAL_EXCHANGE=8201
-PORT_INTERNAL_MERCHANT=8301
-PORT_INTERNAL_LIBEUFIN_BANK=8080
-PORT_INTERNAL_LANDING=8501
-PORT_INTERNAL_BLOG=8502
-PORT_INTERNAL_DONATIONS=8503
-PORT_INTERNAL_SURVEY=8504
-PORT_INTERNAL_BANK_SPA=8505
-
-# Just make sure the services are stopped
-systemctl stop taler-exchange.target
-systemctl stop taler-merchant-httpd.service
-systemctl stop postgresql.service
-systemctl stop taler-demo-landing.service
-systemctl stop taler-demo-blog.service
-systemctl stop taler-demo-donations.service
-systemctl stop taler-demo-survey.service
-systemctl stop libeufin-bank.service
-
-# We now make sure that some important locations are symlinked to
-# the persistent storage volume.
-# Files that already exist in this location are moved to the storage volume
-# and then symlinked.
-# These locations are:
-# /etc/taler
-# /etc/libeufin-bank
-# /var/lib/taler
-# postgres DB directory
-
-function lift_dir() {
-  src=$1
-  target=$2
-  if [[ -L "$src" ]]; then
-    # be idempotent
-    echo "$src is already a symlink"
-  elif [[ -d /talerdata/$target ]]; then
-    echo "symlinking existing /talerdata/$target"
-    rm -rf "$src"
-    ln -s "/talerdata/$target" "$src"
-  else
-    echo "symlinking new /talerdata/$target"
-    mv "$src" "/talerdata/$target"
-    ln -s "/talerdata/$target" "$src"
-  fi
-}
-
-lift_dir /var/lib/taler var-lib-taler
-lift_dir /etc/taler etc-taler
-lift_dir /etc/libeufin-bank etc-libeufin-bank
-lift_dir /var/lib/postgresql var-lib-postgresql
-lift_dir /usr/share/taler/terms usr-share-taler-terms
-
-# Caddy configuration.
-# We use the caddy reverse proxy with automatic
-# internal TLS setup to ensure that the services are
-# reachable inside the container without any external
-# DNS setup under the same domain name and with TLS
-# from inside the container.
-
-systemctl stop caddy.service
-
-cat <<EOF > /etc/caddy/Caddyfile
-https://$BANK_DOMAIN {
-  tls internal
-  reverse_proxy :8080 {
-    # libeufin-bank should eventually not require this anymore,
-    # but currently doesn't work without this header.
-    header_up X-Forwarded-Prefix ""
-  }
-}
-
-https://$EXCHANGE_DOMAIN {
-  tls internal
-  reverse_proxy unix//run/taler/exchange-httpd/exchange-http.sock
-}
-
-https://$MERCHANT_DOMAIN {
-  tls internal
-  reverse_proxy unix//run/taler/merchant-httpd/merchant-http.sock
-}
-
-# Services that only listen on unix domain sockets
-# are reverse-proxied to serve on a TCP port.
-
-:$PORT_INTERNAL_EXCHANGE {
-  reverse_proxy unix//run/taler/exchange-httpd/exchange-http.sock
-}
-
-:$PORT_INTERNAL_MERCHANT {
-  reverse_proxy unix//run/taler/merchant-httpd/merchant-http.sock {
-    # Set this, or otherwise wrong taler://pay URIs will be generated.
-    header_up X-Forwarded-Proto "https"
-  }
-}
-
-:$PORT_INTERNAL_BANK_SPA {
-  root * /usr/share/libeufin-bank/spa
-  root /demobank-ui-settings.js /etc/libeufin-bank/
-  file_server
-}
-EOF
-
-cat <<EOF >> /etc/hosts
-# Start of Taler Sandcastle Domains
-127.0.0.1 $LANDING_DOMAIN
-127.0.0.1 $BANK_DOMAIN
-127.0.0.1 $EXCHANGE_DOMAIN
-127.0.0.1 $MERCHANT_DOMAIN
-127.0.0.1 $BLOG_DOMAIN
-127.0.0.1 $DONATIONS_DOMAIN
-127.0.0.1 $SURVEY_DOMAIN
-# End of Taler Sandcastle Domains
-EOF
-
-systemctl start caddy.service
-
-# Install local, internal CA certs for caddy
-caddy trust
-
-systemctl start postgresql.service
-
-# Set up bank
-
-BANK_DB=libeufinbank
-# Use "|| true" to continue if these already exist.
-sudo -i -u postgres createuser -d libeufin-bank || true
-sudo -i -u postgres createdb -O libeufin-bank $BANK_DB || true
-
-sudo -i -u libeufin-bank libeufin-bank dbinit
-
-cat <<EOF >/etc/libeufin-bank/libeufin-bank.conf
-[libeufin-bank]
-CURRENCY = $CURRENCY
-DEFAULT_CUSTOMER_DEBT_LIMIT = $CURRENCY:5000
-DEFAULT_ADMIN_DEBT_LIMIT = $CURRENCY:200000000000
-REGISTRATION_BONUS = $CURRENCY:100
-REGISTRATION_BONUS_ENABLED = yes
-SPA_CAPTCHA_URL = https://$BANK_DOMAIN/webui/#/operation/{woid}
-SUGGESTED_WITHDRAWAL_EXCHANGE = https://$EXCHANGE_DOMAIN/
-
-[currency-$CURRENCY]
-ENABLED = YES
-name = "$CURRENCY (Taler Demonstrator)"
-code = "$CURRENCY"
-decimal_separator = "."
-fractional_input_digits = 2
-fractional_normal_digits = 2
-fractional_trailing_zero_digits = 2
-is_currency_name_leading = NO
-alt_unit_names = {"0":"$CURRENCY"}
-EOF
-
-cat <<EOF >/etc/libeufin-bank/demobank-ui-settings.js
-globalThis.talerDemobankSettings = {
-  // Only Admin adds users
-  allowRegistrations: false,
-  bankName: "Taler Bank",
-  allowRegistrations: true,
-  simplePasswordForRandomAccounts: true,
-  allowRandomAccountCreation: true,
-  // Show explainer text and navbar to other demo sites
-  showDemoNav: false,
-  demoSites: [
-    ["Landing", "https://$LANDING_DOMAIN/";],
-    ["Bank", "https://$BANK_DOMAIN/";],
-    ["Essay Shop", "https://$BLOG_DOMAIN/";],
-    ["Donations", "https://$DONATIONS_DOMAIN/";],
-    ["Survey", "https://$SURVEY_DOMAIN/";],
-  ],
-  backendBaseURL: "https://$BANK_DOMAIN/";,
-};
-EOF
-
-systemctl enable --now libeufin-bank.service
-
-# TODO: Create accounts for exchange and merchants
-
-taler-harness deployment wait-taler-service libeufin-bank 
https://$BANK_DOMAIN/config
-taler-harness deployment provision-bank-account https://$BANK_DOMAIN/ \
-  --login exchange --exchange --public \
-  --payto $EXCHANGE_PLAIN_PAYTO \
-  --name Exchange \
-  --password sandbox
-
-taler-harness deployment provision-bank-account https://$BANK_DOMAIN/ \
-  --login merchant-default --public \
-  --payto "payto://iban/$MERCHANT_IBAN_DEFAULT" \
-  --name "Default Demo Merchant" \
-  --password sandbox
-
-taler-harness deployment provision-bank-account https://$BANK_DOMAIN/ \
-  --login merchant-pos --public \
-  --payto "payto://iban/$MERCHANT_IBAN_POS" \
-  --name "PoS Merchant" \
-  --password sandbox
-
-taler-harness deployment provision-bank-account https://$BANK_DOMAIN/ \
-  --login merchant-blog --public \
-  --payto "payto://iban/$MERCHANT_IBAN_BLOG" \
-  --name "Blog Merchant" \
-  --password sandbox
-
-taler-harness deployment provision-bank-account https://$BANK_DOMAIN/ \
-  --login merchant-gnunet --public \
-  --payto "payto://iban/$MERCHANT_IBAN_GNUNET" \
-  --name "GNUnet Donations Merchant" \
-  --password sandbox
-
-taler-harness deployment provision-bank-account https://$BANK_DOMAIN/ \
-  --login merchant-taler --public \
-  --payto "payto://iban/$MERCHANT_IBAN_TALER" \
-  --name "Taler Donations Merchant" \
-  --password sandbox
-
-taler-harness deployment provision-bank-account https://$BANK_DOMAIN/ \
-  --login merchant-tor --public \
-  --payto "payto://iban/$MERCHANT_IBAN_TOR" \
-  --name "Tor Donations Merchant" \
-  --password sandbox
-
-taler-harness deployment provision-bank-account https://$BANK_DOMAIN/ \
-  --login merchant-survey --public \
-  --payto "payto://iban/$MERCHANT_IBAN_SURVEY" \
-  --name "Tor Survey Merchant" \
-  --password sandbox
-
-# Set up exchange
-
-MASTER_PUBLIC_KEY=$(sudo -i -u taler-exchange-offline taler-exchange-offline 
-LDEBUG setup)
-
-EXCHANGE_DB=talerexchange
-# Use "|| true" to continue if these already exist.
-sudo -i -u postgres createuser -d taler-exchange-httpd || true
-sudo -i -u postgres createuser taler-exchange-wire || true
-sudo -i -u postgres createuser taler-exchange-closer || true
-sudo -i -u postgres createuser taler-exchange-aggregator || true
-sudo -i -u postgres createdb -O taler-exchange-httpd $EXCHANGE_DB || true
-
-# Generate /etc/taler/conf.d/setup.conf
-cat <<EOF > /etc/taler/conf.d/setup.conf
-[taler]
-CURRENCY = $CURRENCY
-CURRENCY_ROUND_UNIT = $CURRENCY:0.01
-
-[currency-$CURRENCY]
-ENABLED = YES
-name = "$CURRENCY (Taler Demonstrator)"
-code = "$CURRENCY"
-decimal_separator = "."
-fractional_input_digits = 2
-fractional_normal_digits = 2
-fractional_trailing_zero_digits = 2
-is_currency_name_leading = NO
-alt_unit_names = {"0":"$CURRENCY"}
-
-[exchange]
-AML_THRESHOLD = $CURRENCY:1000000
-MASTER_PUBLIC_KEY = $MASTER_PUBLIC_KEY
-BASE_URL = https://$EXCHANGE_DOMAIN/
-
-[exchange-account-default]
-PAYTO_URI = $EXCHANGE_FULL_PAYTO
-ENABLE_DEBIT = YES
-ENABLE_CREDIT = YES
-@inline-secret@ exchange-accountcredentials-default 
../secrets/exchange-accountcredentials-default.secret.conf
-EOF
-
-cat <<EOF >/etc/taler/secrets/exchange-db.secret.conf
-[exchangedb-postgres]
-CONFIG=postgres:///${EXCHANGE_DB}
-EOF
-chmod 440 /etc/taler/secrets/exchange-db.secret.conf
-chown root:taler-exchange-db /etc/taler/secrets/exchange-db.secret.conf
-
-cat <<EOF > /etc/taler/secrets/exchange-accountcredentials-default.secret.conf
-[exchange-accountcredentials-default]
-WIRE_GATEWAY_URL = https://$BANK_DOMAIN/accounts/exchange/taler-wire-gateway/
-WIRE_GATEWAY_AUTH_METHOD = basic
-USERNAME = exchange
-PASSWORD = ${EXCHANGE_BANK_PASSWORD}
-EOF
-chmod 400 /etc/taler/secrets/exchange-accountcredentials-default.secret.conf
-chown taler-exchange-wire:taler-exchange-db 
/etc/taler/secrets/exchange-accountcredentials-default.secret.conf
-
-if [[ ! -e /etc/taler/conf.d/$CURRENCY-coins.conf ]]; then
-  # Only create if necessary, as each [COIN-...] section
-  # has a unique name with a timestamp.
-  taler-harness deployment gen-coin-config \
-    --min-amount "${CURRENCY}:0.01" \
-    --max-amount "${CURRENCY}:100" \
-      >"/etc/taler/conf.d/$CURRENCY-coins.conf"
-fi
-
-echo "Initializing exchange database"
-sudo -u taler-exchange-httpd taler-exchange-dbinit -LDEBUG -c 
/etc/taler/taler.conf
-
-echo 'GRANT USAGE ON SCHEMA exchange TO "taler-exchange-wire";' | sudo -i -u 
postgres psql -f - ${EXCHANGE_DB}
-echo 'GRANT SELECT,INSERT,UPDATE,DELETE ON ALL TABLES IN SCHEMA exchange TO 
"taler-exchange-wire";' | sudo -i -u postgres psql -f - ${EXCHANGE_DB}
-echo 'GRANT USAGE ON SCHEMA _v TO "taler-exchange-wire";' | sudo -i -u 
postgres psql -f - ${EXCHANGE_DB}
-echo 'GRANT SELECT ON ALL TABLES IN SCHEMA _v TO "taler-exchange-wire";' | 
sudo -i -u postgres psql -f - ${EXCHANGE_DB}
-
-echo 'GRANT USAGE ON SCHEMA exchange TO "taler-exchange-closer";' | sudo -i -u 
postgres psql -f - ${EXCHANGE_DB}
-echo 'GRANT SELECT,INSERT,UPDATE,DELETE ON ALL TABLES IN SCHEMA exchange TO 
"taler-exchange-closer";' | sudo -i -u postgres psql -f - ${EXCHANGE_DB}
-echo 'GRANT USAGE ON SCHEMA _v TO "taler-exchange-closer";' | sudo -i -u 
postgres psql -f - ${EXCHANGE_DB}
-echo 'GRANT SELECT ON ALL TABLES IN SCHEMA _v TO "taler-exchange-closer";' | 
sudo -i -u postgres psql -f - ${EXCHANGE_DB}
-
-echo 'GRANT USAGE ON SCHEMA exchange TO "taler-exchange-aggregator";' | sudo 
-i -u postgres psql -f - ${EXCHANGE_DB}
-echo 'GRANT SELECT,INSERT,UPDATE,DELETE ON ALL TABLES IN SCHEMA exchange TO 
"taler-exchange-aggregator";' | sudo -i -u postgres psql -f - ${EXCHANGE_DB}
-echo 'GRANT USAGE ON SCHEMA _v TO "taler-exchange-aggregator";' | sudo -i -u 
postgres psql -f - ${EXCHANGE_DB}
-echo 'GRANT SELECT ON ALL TABLES IN SCHEMA _v TO "taler-exchange-aggregator";' 
| sudo -i -u postgres psql -f - ${EXCHANGE_DB}
-
-
-# # The ToS generator is currently borked, we don't generated ToS until that's 
fixed.
-TOS_PATH=/usr/share/taler/terms
-if [[ ! -e "$TOS_PATH/stamp-generated" ]]; then
-  # ToS generator is picky about the path that it is being run from
-  cd $TOS_PATH
-  taler-terms-generator -i exchange-tos-v0 -a "Taler Systems SA" -C "Taler 
Systems SA" -p a4 -o $TOS_PATH -l en
-  taler-terms-generator -i exchange-pp-v0 -a "Taler Systems SA" -C "Taler 
Systems SA" -p a4 -o $TOS_PATH -l en
-  taler-terms-generator -i exchange-tos-v0 -a "Taler Systems SA" -C "Taler 
Systems SA" -p a4 -o $TOS_PATH
-  taler-terms-generator -i exchange-pp-v0 -a "Taler Systems SA" -C "Taler 
Systems SA" -p a4 -o $TOS_PATH
-  touch "$TOS_PATH/stamp-generated"
-  cd -
-fi
-
-systemctl enable --now taler-exchange.target
-
-taler-harness deployment wait-taler-service taler-exchange 
https://$EXCHANGE_DOMAIN/config
-taler-harness deployment wait-endpoint https://$EXCHANGE_DOMAIN/management/keys
-
-sudo -i -u taler-exchange-offline \
-  taler-exchange-offline \
-  -c /etc/taler/taler.conf \
-  download \
-  sign \
-  upload
-
-sudo -i -u taler-exchange-offline \
-  taler-exchange-offline \
-  enable-account "${EXCHANGE_FULL_PAYTO}" \
-  wire-fee now iban "${CURRENCY}":0 "${CURRENCY}":0 \
-  global-fee now "${CURRENCY}":0 "${CURRENCY}":0 "${CURRENCY}":0 1h 6a 0 \
-  upload
-
-# Set up merchant backend
-
-MERCHANT_DB=talermerchant
-# Use "|| true" to continue if these already exist.
-sudo -i -u postgres createuser -d taler-merchant-httpd || true
-sudo -i -u postgres createdb -O taler-merchant-httpd $MERCHANT_DB || true
-
-cat <<EOF >/etc/taler/secrets/merchant-db.secret.conf
-[merchantdb-postgres]
-CONFIG=postgres:///${MERCHANT_DB}
-EOF
-chmod 440 /etc/taler/secrets/merchant-db.secret.conf
-chown taler-merchant-httpd:root /etc/taler/secrets/merchant-db.secret.conf
-
-sudo -u taler-merchant-httpd taler-merchant-dbinit -c /etc/taler/taler.conf
-
-cat <<EOF >/etc/taler/conf.d/merchant-exchanges.conf
-[merchant-exchange-sandcastle]
-EXCHANGE_BASE_URL = https://$EXCHANGE_DOMAIN/
-MASTER_KEY = $MASTER_PUBLIC_KEY
-CURRENCY = $CURRENCY
-EOF
-
-systemctl enable --now taler-merchant-httpd
-taler-harness deployment wait-taler-service taler-merchant 
https://$MERCHANT_DOMAIN/config
-
-taler-harness deployment provision-merchant-instance \
-  https://$MERCHANT_DOMAIN/ \
-  --management-token secret-token:sandbox \
-  --instance-token secret-token:sandbox \
-  --name Merchant \
-  --id default \
-  --payto "payto://iban/$MERCHANT_IBAN_DEFAULT?receiver-name=Merchant"
-
-taler-harness deployment provision-merchant-instance \
-  https://$MERCHANT_DOMAIN/ \
-  --management-token secret-token:sandbox \
-  --instance-token secret-token:sandbox \
-  --name "POS Merchant" \
-  --id pos \
-  --payto "payto://iban/$MERCHANT_IBAN_POS?receiver-name=POS+Merchant"
-
-taler-harness deployment provision-merchant-instance \
-  https://$MERCHANT_DOMAIN/ \
-  --management-token secret-token:sandbox \
-  --instance-token secret-token:sandbox \
-  --name "Blog Merchant" \
-  --id blog \
-  --payto "payto://iban/$MERCHANT_IBAN_BLOG?receiver-name=Blog+Merchant"
-
-taler-harness deployment provision-merchant-instance \
-  https://$MERCHANT_DOMAIN/ \
-  --management-token secret-token:sandbox \
-  --instance-token secret-token:sandbox \
-  --name "GNUnet Merchant" \
-  --id gnunet \
-  --payto "payto://iban/$MERCHANT_IBAN_GNUNET?receiver-name=GNUnet+Merchant"
-
-taler-harness deployment provision-merchant-instance \
-  https://$MERCHANT_DOMAIN/ \
-  --management-token secret-token:sandbox \
-  --instance-token secret-token:sandbox \
-  --name "Taler Merchant" \
-  --id taler \
-  --payto "payto://iban/$MERCHANT_IBAN_TALER?receiver-name=Taler+Merchant"
-
-taler-harness deployment provision-merchant-instance \
-  https://$MERCHANT_DOMAIN/ \
-  --management-token secret-token:sandbox \
-  --instance-token secret-token:sandbox \
-  --name "Tor Merchant" \
-  --id tor \
-  --payto "payto://iban/$MERCHANT_IBAN_TOR?receiver-name=Tor+Merchant"
-
-
-# Now we set up the taler-merchant-demos
-
-cat <<EOF >/etc/taler/taler-merchant-frontends.conf
-# Different entry point, we need to repeat some settings.
-# In the future, taler-merchant-demos should become
-# robust enough to read from the main config.
-[taler]
-CURRENCY = $CURRENCY
-[frontends]
-BACKEND = https://$MERCHANT_DOMAIN/
-BACKEND_APIKEY = secret-token:sandbox
-[landing]
-SERVE = http
-HTTP_PORT = $PORT_INTERNAL_LANDING
-[blog]
-SERVE = http
-HTTP_PORT = $PORT_INTERNAL_BLOG
-[donations]
-SERVE = http
-HTTP_PORT = $PORT_INTERNAL_DONATIONS
-[survey]
-SERVE = http
-HTTP_PORT = $PORT_INTERNAL_SURVEY
-EOF
-
-# This really should not exist, the taler-merchant-frontends
-# should be easier to configure!
-cat <<EOF >/etc/taler/taler-merchant-frontends.env
-TALER_ENV_URL_INTRO=https://$LANDING_DOMAIN/
-TALER_ENV_URL_LANDING=https://$LANDING_DOMAIN/
-TALER_ENV_URL_BANK=https://$BANK_DOMAIN/
-TALER_ENV_URL_MERCHANT_BLOG=https://$BLOG_DOMAIN/
-TALER_ENV_URL_MERCHANT_DONATIONS=https://$DONATIONS_DOMAIN/
-TALER_ENV_URL_MERCHANT_SURVEY=https://$SURVEY_DOMAIN/
-EOF
-
-systemctl enable --now taler-demo-landing
-systemctl enable --now taler-demo-blog
-systemctl enable --now taler-demo-donations
-systemctl enable --now taler-demo-survey
-
-
-# FIXME: Maybe do some taler-wallet-cli test?
-# FIXME: How do we report errors occurring during the setup script?

-- 
To stop receiving notification emails like this one, please contact
gnunet@gnunet.org.