[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[taler-donau] branch master updated: some changes
|
From: |
gnunet |
|
Subject: |
[taler-donau] branch master updated: some changes |
|
Date: |
Tue, 19 Dec 2023 11:11:47 +0100 |
This is an automated email from the git hooks/post-receive script.
lukas-matyja pushed a commit to branch master
in repository donau.
The following commit(s) were added to refs/heads/master by this push:
new 41cdbea some changes
41cdbea is described below
commit 41cdbeace937703c138135f91bbfcc961a96e492
Author: Matyja Lukas Adam <lukas.matyja@students.bfh.ch>
AuthorDate: Tue Dec 19 11:11:40 2023 +0100
some changes
---
.gitignore | 1 +
config.status | 2298 +++++++
contrib/gana | 2 +-
contrib/sigp/donau_signatures.h | 44 +
contrib/sigp/donau_signatures.h.tmp | 12 +
libtool | 11951 ++++++++++++++++++++++++++++++++++
po/POTFILES | 1 +
po/donau.pot | 2669 ++++++++
src/testing/donau-unified-setup.sh | 4 +-
src/util/donau-config | 13 +
stamp-h1 | 1 +
taler_config.h | 331 +
12 files changed, 17324 insertions(+), 3 deletions(-)
diff --git a/.gitignore b/.gitignore
index b467486..a7852b0 100644
--- a/.gitignore
+++ b/.gitignore
@@ -12,3 +12,4 @@ src/include/donau_signatures.h
*.orig
src/donau-tools/taler-donau-dbinit
src/donau/donau-httpd
+src/testing/test_donau_api_home/.local/*
diff --git a/config.status b/config.status
new file mode 100755
index 0000000..d6a682f
--- /dev/null
+++ b/config.status
@@ -0,0 +1,2298 @@
+#! /bin/bash
+# Generated by configure.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=${CONFIG_SHELL-/bin/bash}
+export SHELL
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+as_nop=:
+if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1
+then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else $as_nop
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+
+# Reset variables that may have inherited troublesome values from
+# the environment.
+
+# IFS needs to be set, to space, tab, and newline, in precisely that order.
+# (If _AS_PATH_WALK were called with IFS unset, it would have the
+# side effect of setting IFS to empty, thus disabling word splitting.)
+# Quoting is to prevent editors from complaining about space-tab.
+as_nl='
+'
+export as_nl
+IFS=" "" $as_nl"
+
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# Ensure predictable behavior from utilities with locale-dependent output.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# We cannot yet rely on "unset" to work, but we need these variables
+# to be unset--not just set to an empty or harmless value--now, to
+# avoid bugs in old shells (e.g. pre-3.0 UWIN ksh). This construct
+# also avoids known problems related to "unset" and subshell syntax
+# in other old shells (e.g. bash 2.01 and pdksh 5.2.14).
+for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH
+do eval test \${$as_var+y} \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+
+# Ensure that fds 0, 1, and 2 are open.
+if (exec 3>&0) 2>/dev/null; then :; else exec 0</dev/null; fi
+if (exec 3>&1) 2>/dev/null; then :; else exec 1>/dev/null; fi
+if (exec 3>&2) ; then :; else exec 2>/dev/null; fi
+
+# The user is always right.
+if ${PATH_SEPARATOR+false} :; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ case $as_dir in #(((
+ '') as_dir=./ ;;
+ */) ;;
+ *) as_dir=$as_dir/ ;;
+ esac
+ test -r "$as_dir$0" && as_myself=$as_dir$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute
file name" >&2
+ exit 1
+fi
+
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"}
as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ printf "%s\n" "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null
+then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else $as_nop
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null
+then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else $as_nop
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+# Determine whether it's possible to make 'echo' print without a newline.
+# These variables are no longer used directly by Autoconf, but are AC_SUBSTed
+# for compatibility with existing Makefiles.
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+# For backward compatibility with old third-party macros, we provide
+# the shell variables $as_echo and $as_echo_n. New code should use
+# AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively.
+as_echo='printf %s\n'
+as_echo_n='printf %s'
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed
'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by donau $as_me 0.9.2, which was
+generated by GNU Autoconf 2.71. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+# Files that config.status was made for.
+config_files=" Makefile contrib/Makefile doc/Makefile doc/doxygen/Makefile
po/Makefile.in src/Makefile src/donau/Makefile src/donaudb/Makefile
src/donau-tools/Makefile src/lib/Makefile src/json/Makefile src/pq/Makefile
src/testing/Makefile src/include/Makefile src/util/Makefile"
+config_headers=" taler_config.h"
+config_commands=" depfiles libtool po-directories"
+
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <taler-bug@gnunet.org>."
+
+ac_cs_config=''
+ac_cs_version="\
+donau config.status 0.9.2
+configured by ./configure, generated by GNU Autoconf 2.71,
+ with options \"$ac_cs_config\"
+
+Copyright (C) 2021 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='/home/enigma/Documents/Taler/donau'
+srcdir='.'
+INSTALL='/usr/bin/install -c'
+MKDIR_P='/usr/bin/mkdir -p'
+AWK='mawk'
+test -n "$AWK" || AWK=awk
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=?*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ printf "%s\n" "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ printf "%s\n" "$ac_cs_config"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`printf "%s\n" "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`printf "%s\n" "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+ --help | --hel | -h )
+ printf "%s\n" "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+if $ac_cs_recheck; then
+ set X /bin/bash './configure' $ac_configure_extra_args --no-create
--no-recursion
+ shift
+ \printf "%s\n" "running CONFIG_SHELL=/bin/bash $*" >&6
+ CONFIG_SHELL='/bin/bash'
+ export CONFIG_SHELL
+ exec "$@"
+fi
+
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ printf "%s\n" "$ac_log"
+} >&5
+
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="" MAKE="make"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+macro_version='2.4.7'
+macro_revision='2.4.7'
+enable_static='no'
+enable_shared='yes'
+pic_mode='default'
+enable_fast_install='needless'
+shared_archive_member_spec=''
+SHELL='/bin/bash'
+ECHO='printf %s\n'
+PATH_SEPARATOR=':'
+host_alias=''
+host='x86_64-pc-linux-gnu'
+host_os='linux-gnu'
+build_alias=''
+build='x86_64-pc-linux-gnu'
+build_os='linux-gnu'
+SED='/usr/bin/sed'
+Xsed='/usr/bin/sed -e 1s/^X//'
+GREP='/usr/bin/grep'
+EGREP='/usr/bin/grep -E'
+FGREP='/usr/bin/grep -F'
+LD='/usr/bin/ld -m elf_x86_64'
+NM='/usr/bin/nm -B'
+LN_S='ln -s'
+max_cmd_len='1572864'
+ac_objext='o'
+exeext=''
+lt_unset='unset'
+lt_SP2NL='tr \040 \012'
+lt_NL2SP='tr \015\012 \040\040'
+lt_cv_to_host_file_cmd='func_convert_file_noop'
+lt_cv_to_tool_file_cmd='func_convert_file_noop'
+reload_flag=' -r'
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+FILECMD='file'
+OBJDUMP='objdump'
+deplibs_check_method='pass_all'
+file_magic_cmd='$MAGIC_CMD'
+file_magic_glob=''
+want_nocaseglob='no'
+DLLTOOL='false'
+sharedlib_from_linklib_cmd='printf %s\n'
+AR='ar'
+lt_ar_flags='cr'
+AR_FLAGS='cr'
+archiver_list_spec='@'
+STRIP='strip'
+RANLIB='ranlib'
+old_postinstall_cmds='chmod 644 $oldlib~$RANLIB $tool_oldlib'
+old_postuninstall_cmds=''
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs~$RANLIB $tool_oldlib'
+lock_old_archive_extraction='no'
+CC='gcc'
+CFLAGS='-Wall -Wno-address-of-packed-member -g -O2'
+compiler='gcc'
+GCC='yes'
+lt_cv_sys_global_symbol_pipe='/usr/bin/sed -n -e '\''s/^.*[
]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][
]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'' | /usr/bin/sed '\''/
__gnu_lto/d'\'''
+lt_cv_sys_global_symbol_to_cdecl='/usr/bin/sed -n -e '\''s/^T .*
\(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .*
\(.*\)$/extern char \1;/p'\'''
+lt_cv_sys_global_symbol_to_import=''
+lt_cv_sys_global_symbol_to_c_name_address='/usr/bin/sed -n -e '\''s/^: \(.*\)
.*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/
{"\1", (void *) \&\1},/p'\'''
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='/usr/bin/sed -n -e
'\''s/^: \(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e
'\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(lib.*\)$/ {"\1", (void *) \&\1},/p'\''
-e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"lib\1", (void *)
\&\1},/p'\'''
+lt_cv_nm_interface='BSD nm'
+nm_file_list_spec='@'
+lt_sysroot=''
+lt_cv_truncate_bin='/usr/bin/dd bs=4096 count=1'
+objdir='.libs'
+MAGIC_CMD='file'
+lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+lt_prog_compiler_pic=' -fPIC -DPIC'
+lt_prog_compiler_wl='-Wl,'
+lt_prog_compiler_static='-static'
+lt_cv_prog_compiler_c_o='yes'
+need_locks='no'
+MANIFEST_TOOL=':'
+DSYMUTIL=''
+NMEDIT=''
+LIPO=''
+OTOOL=''
+OTOOL64=''
+libext='a'
+shrext_cmds='.so'
+extract_expsyms_cmds=''
+archive_cmds_need_lc='no'
+enable_shared_with_static_runtimes='no'
+export_dynamic_flag_spec='$wl--export-dynamic'
+whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive'
+compiler_needs_object='no'
+old_archive_from_new_cmds=''
+old_archive_from_expsyms_cmds=''
+archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags
$wl-soname $wl$soname -o $lib'
+archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >>
$output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname
$wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
+module_cmds=''
+module_expsym_cmds=''
+with_gnu_ld='yes'
+allow_undefined_flag=''
+no_undefined_flag=''
+hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+hardcode_libdir_separator=''
+hardcode_direct='no'
+hardcode_direct_absolute='no'
+hardcode_minus_L='no'
+hardcode_shlibpath_var='unsupported'
+hardcode_automatic='no'
+inherit_rpath='no'
+link_all_deplibs='no'
+always_export_symbols='no'
+export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED
'\''s/.* //'\'' | sort | uniq > $export_symbols'
+exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+include_expsyms=''
+prelink_cmds=''
+postlink_cmds=''
+file_list_spec=''
+variables_saved_for_relink='PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX
COMPILER_PATH LIBRARY_PATH'
+need_lib_prefix='no'
+need_version='no'
+version_type='linux'
+runpath_var='LD_RUN_PATH'
+shlibpath_var='LD_LIBRARY_PATH'
+shlibpath_overrides_runpath='yes'
+libname_spec='lib$name'
+library_names_spec='$libname$release$shared_ext$versuffix
$libname$release$shared_ext$major $libname$shared_ext'
+soname_spec='$libname$release$shared_ext$major'
+install_override_mode=''
+postinstall_cmds=''
+postuninstall_cmds=''
+finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+finish_eval=''
+hardcode_into_libs='yes'
+sys_lib_search_path_spec='/usr/lib/gcc/x86_64-linux-gnu/12
/usr/lib/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib '
+configure_time_dlsearch_path='/lib /usr/lib
/usr/lib/x86_64-linux-gnu/libfakeroot /usr/local/lib
/usr/local/lib/x86_64-linux-gnu /lib/x86_64-linux-gnu /usr/lib/x86_64-linux-gnu
'
+configure_time_lt_sys_library_path=''
+hardcode_action='immediate'
+enable_dlopen='yes'
+enable_dlopen_self='yes'
+enable_dlopen_self_static='no'
+old_striplib='strip --strip-debug'
+striplib='strip --strip-unneeded'
+
+LTCC='gcc'
+LTCFLAGS='-g -O2'
+compiler='gcc'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in SHELL ECHO PATH_SEPARATOR SED GREP EGREP FGREP LD NM LN_S lt_SP2NL
lt_NL2SP reload_flag FILECMD OBJDUMP deplibs_check_method file_magic_cmd
file_magic_glob want_nocaseglob DLLTOOL sharedlib_from_linklib_cmd AR
archiver_list_spec STRIP RANLIB CC CFLAGS compiler lt_cv_sys_global_symbol_pipe
lt_cv_sys_global_symbol_to_cdecl lt_cv_sys_global_symbol_to_import
lt_cv_sys_global_symbol_to_c_name_address
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix lt_cv_nm_interface
nm_file_li [...]
+ case `eval \\$ECHO \\""\\$$var"\\"` in
+ *[\\\`\"\$]*)
+ eval "lt_$var=\\\"\`\$ECHO \"\$$var\" | \$SED
\"\$sed_quote_subst\"\`\\\"" ## exclude from sc_prohibit_nested_quotes
+ ;;
+ *)
+ eval "lt_$var=\\\"\$$var\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds old_postinstall_cmds old_postuninstall_cmds
old_archive_cmds extract_expsyms_cmds old_archive_from_new_cmds
old_archive_from_expsyms_cmds archive_cmds archive_expsym_cmds module_cmds
module_expsym_cmds export_symbols_cmds prelink_cmds postlink_cmds
postinstall_cmds postuninstall_cmds finish_cmds sys_lib_search_path_spec
configure_time_dlsearch_path configure_time_lt_sys_library_path; do
+ case `eval \\$ECHO \\""\\$$var"\\"` in
+ *[\\\`\"\$]*)
+ eval "lt_$var=\\\"\`\$ECHO \"\$$var\" | \$SED -e
\"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e
\"\$delay_variable_subst\"\`\\\"" ## exclude from sc_prohibit_nested_quotes
+ ;;
+ *)
+ eval "lt_$var=\\\"\$$var\\\""
+ ;;
+ esac
+done
+
+ac_aux_dir='./build-aux/'
+
+# See if we are running on zsh, and set the options that allow our
+# commands through without removal of \ escapes INIT.
+if test -n "${ZSH_VERSION+set}"; then
+ setopt NO_GLOB_SUBST
+fi
+
+
+ PACKAGE='donau'
+ VERSION='0.9.2'
+ RM='rm -f'
+ ofile='libtool'
+
+
+
+# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+ # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
+ # from automake < 1.5.
+ eval 'OBSOLETE_ALL_LINGUAS''=""'
+ # Capture the value of LINGUAS because we need it to compute CATALOGS.
+ LINGUAS="%UNSET%"
+
+
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "taler_config.h") CONFIG_HEADERS="$CONFIG_HEADERS taler_config.h" ;;
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+ "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;;
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "contrib/Makefile") CONFIG_FILES="$CONFIG_FILES contrib/Makefile" ;;
+ "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
+ "doc/doxygen/Makefile") CONFIG_FILES="$CONFIG_FILES doc/doxygen/Makefile"
;;
+ "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
+ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+ "src/donau/Makefile") CONFIG_FILES="$CONFIG_FILES src/donau/Makefile" ;;
+ "src/donaudb/Makefile") CONFIG_FILES="$CONFIG_FILES src/donaudb/Makefile"
;;
+ "src/donau-tools/Makefile") CONFIG_FILES="$CONFIG_FILES
src/donau-tools/Makefile" ;;
+ "src/lib/Makefile") CONFIG_FILES="$CONFIG_FILES src/lib/Makefile" ;;
+ "src/json/Makefile") CONFIG_FILES="$CONFIG_FILES src/json/Makefile" ;;
+ "src/pq/Makefile") CONFIG_FILES="$CONFIG_FILES src/pq/Makefile" ;;
+ "src/testing/Makefile") CONFIG_FILES="$CONFIG_FILES src/testing/Makefile"
;;
+ "src/include/Makefile") CONFIG_FILES="$CONFIG_FILES src/include/Makefile"
;;
+ "src/util/Makefile") CONFIG_FILES="$CONFIG_FILES src/util/Makefile" ;;
+
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test ${CONFIG_FILES+y} || CONFIG_FILES=$config_files
+ test ${CONFIG_HEADERS+y} || CONFIG_HEADERS=$config_headers
+ test ${CONFIG_COMMANDS+y} || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp= ac_tmp=
+ trap 'exit_status=$?
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+ trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+cat >>"$ac_tmp/subs1.awk" <<\_ACAWK &&
+S["am__EXEEXT_FALSE"]=""
+S["am__EXEEXT_TRUE"]="#"
+S["LTLIBOBJS"]=""
+S["LIBOBJS"]=""
+S["ENABLE_DOC_FALSE"]="#"
+S["ENABLE_DOC_TRUE"]=""
+S["gitcommand"]="/usr/bin/git"
+S["USE_COVERAGE_FALSE"]=""
+S["USE_COVERAGE_TRUE"]="#"
+S["JQ"]="/usr/bin/jq"
+S["HAVE_DEVELOPER_FALSE"]="#"
+S["HAVE_DEVELOPER_TRUE"]=""
+S["HAVE_POSTGRESQL_FALSE"]="#"
+S["HAVE_POSTGRESQL_TRUE"]=""
+S["POSTGRESQL_LIBS"]="-lpq "
+S["POSTGRESQL_VERSION"]="15.5"
+S["PKG_CONFIG_LIBDIR"]=""
+S["PKG_CONFIG_PATH"]=""
+S["PKG_CONFIG"]="/usr/bin/pkg-config"
+S["POSTGRESQL_LDFLAGS"]=""
+S["POSTGRESQL_LIBFLAGS"]=""
+S["POSTGRESQL_CPPFLAGS"]="-I/usr/include/postgresql "
+S["LIBGNURLCURL_LIBS"]="-lcurl"
+S["HAVE_LIBCURL_FALSE"]="#"
+S["HAVE_LIBCURL_TRUE"]=""
+S["HAVE_LIBGNURL_FALSE"]=""
+S["HAVE_LIBGNURL_TRUE"]="#"
+S["LIBCURL"]="-lcurl"
+S["LIBCURL_CPPFLAGS"]=""
+S["_libcurl_config"]=""
+S["LIBGNURL"]=""
+S["LIBGNURL_CPPFLAGS"]=""
+S["_libgnurl_config"]=""
+S["POSUB"]="po"
+S["LTLIBINTL"]=""
+S["LIBINTL"]=""
+S["INTLLIBS"]=""
+S["LTLIBICONV"]="-liconv"
+S["LIBICONV"]="-liconv"
+S["INTL_MACOSX_LIBS"]=""
+S["CPP"]="gcc -E"
+S["XGETTEXT_EXTRA_OPTIONS"]=""
+S["MSGMERGE"]="/usr/bin/msgmerge"
+S["XGETTEXT_015"]="/usr/bin/xgettext"
+S["XGETTEXT"]="/usr/bin/xgettext"
+S["GMSGFMT_015"]="/usr/bin/msgfmt"
+S["MSGFMT_015"]="/usr/bin/msgfmt"
+S["GMSGFMT"]="/usr/bin/msgfmt"
+S["MSGFMT"]="/usr/bin/msgfmt"
+S["GETTEXT_MACRO_VERSION"]="0.19"
+S["USE_NLS"]="yes"
+S["MHD_HAVE_EPOLL_FALSE"]=""
+S["MHD_HAVE_EPOLL_TRUE"]="#"
+S["HAVE_EXPENSIVE_TESTS_FALSE"]=""
+S["HAVE_EXPENSIVE_TESTS_TRUE"]="#"
+S["LIBGCRYPT_LIBS"]="-L/usr/lib/x86_64-linux-gnu -lgcrypt"
+S["LIBGCRYPT_CFLAGS"]=""
+S["LIBGCRYPT_CONFIG"]="/usr/bin/libgcrypt-config"
+S["TALER_PLUGIN_LDFLAGS"]="-export-dynamic -avoid-version -module
-no-undefined"
+S["TALER_LIB_LDFLAGS"]="-export-dynamic -no-undefined"
+S["DOC_ONLY_FALSE"]=""
+S["DOC_ONLY_TRUE"]="#"
+S["DX_RULES"]=""
+S["PAPER_SIZE"]=""
+S["DOXYGEN_PAPER_SIZE"]=""
+S["GENERATE_LATEX"]="NO"
+S["DX_PDFLATEX"]=""
+S["DX_FLAG_pdf"]="0"
+S["DX_EGREP"]=""
+S["DX_DVIPS"]=""
+S["DX_MAKEINDEX"]=""
+S["DX_LATEX"]=""
+S["DX_FLAG_ps"]="0"
+S["DX_FLAG_html"]="0"
+S["GENERATE_CHI"]="NO"
+S["DX_FLAG_chi"]="0"
+S["GENERATE_HTMLHELP"]="NO"
+S["GENERATE_HTML"]="NO"
+S["HHC_PATH"]=""
+S["DX_HHC"]=""
+S["DX_FLAG_chm"]="0"
+S["GENERATE_XML"]="NO"
+S["DX_FLAG_xml"]="0"
+S["GENERATE_RTF"]="NO"
+S["DX_FLAG_rtf"]="0"
+S["GENERATE_MAN"]="NO"
+S["DX_FLAG_man"]="0"
+S["DOT_PATH"]=""
+S["HAVE_DOT"]="NO"
+S["DX_DOT"]=""
+S["DX_FLAG_dot"]="0"
+S["PERL_PATH"]=""
+S["DX_PERL"]="/usr/bin/perl"
+S["DX_DOXYGEN"]=""
+S["DX_FLAG_doc"]="0"
+S["PROJECT"]="donau"
+S["SRCDIR"]="."
+S["DX_ENV"]=" SRCDIR='.' PROJECT='donau' VERSION='0.9.2' HAVE_DOT='NO'
GENERATE_MAN='NO' GENERATE_RTF='NO' GENERATE_XML='NO' GENERATE_HTMLHELP='NO'
GENERATE_CHI="\
+"'NO' GENERATE_HTML='NO' GENERATE_LATEX='NO'"
+S["DX_DOCDIR4"]="doxygen-doc"
+S["DX_DOCDIR3"]="doxygen-doc"
+S["DX_DOCDIR2"]="doxygen-doc"
+S["DX_CONFIG4"]="$(srcdir)/Doxyfile"
+S["DX_CONFIG3"]="$(srcdir)/Doxyfile"
+S["DX_CONFIG2"]="$(srcdir)/Doxyfile"
+S["DX_DOCDIR"]="doxygen-doc"
+S["DX_CONFIG"]="$(srcdir)/Doxyfile"
+S["DX_PROJECT"]="donau"
+S["LT_SYS_LIBRARY_PATH"]=""
+S["OTOOL64"]=""
+S["OTOOL"]=""
+S["LIPO"]=""
+S["NMEDIT"]=""
+S["DSYMUTIL"]=""
+S["MANIFEST_TOOL"]=":"
+S["RANLIB"]="ranlib"
+S["ac_ct_AR"]="ar"
+S["AR"]="ar"
+S["DLLTOOL"]="false"
+S["OBJDUMP"]="objdump"
+S["FILECMD"]="file"
+S["NM"]="/usr/bin/nm -B"
+S["ac_ct_DUMPBIN"]=""
+S["DUMPBIN"]=""
+S["LD"]="/usr/bin/ld -m elf_x86_64"
+S["FGREP"]="/usr/bin/grep -F"
+S["EGREP"]="/usr/bin/grep -E"
+S["GREP"]="/usr/bin/grep"
+S["SED"]="/usr/bin/sed"
+S["LIBTOOL"]="$(SHELL) $(top_builddir)/libtool"
+S["LN_S"]="ln -s"
+S["am__fastdepOBJC_FALSE"]="#"
+S["am__fastdepOBJC_TRUE"]=""
+S["OBJCDEPMODE"]="depmode=gcc3"
+S["ac_ct_OBJC"]="gcc"
+S["OBJCFLAGS"]=""
+S["OBJC"]="gcc"
+S["am__fastdepCC_FALSE"]="#"
+S["am__fastdepCC_TRUE"]=""
+S["CCDEPMODE"]="depmode=gcc3"
+S["am__nodep"]="_no"
+S["AMDEPBACKSLASH"]="\\"
+S["AMDEP_FALSE"]="#"
+S["AMDEP_TRUE"]=""
+S["am__include"]="include"
+S["DEPDIR"]=".deps"
+S["OBJEXT"]="o"
+S["EXEEXT"]=""
+S["ac_ct_CC"]="gcc"
+S["CPPFLAGS"]=" -I/usr/include/postgresql "
+S["LDFLAGS"]=""
+S["CFLAGS"]="-Wall -Wno-address-of-packed-member -g -O2"
+S["CC"]="gcc"
+S["AM_BACKSLASH"]="\\"
+S["AM_DEFAULT_VERBOSITY"]="0"
+S["AM_DEFAULT_V"]="$(AM_DEFAULT_VERBOSITY)"
+S["AM_V"]="$(V)"
+S["CSCOPE"]="cscope"
+S["ETAGS"]="etags"
+S["CTAGS"]="ctags"
+S["am__untar"]="tar -xf -"
+S["am__tar"]="tar --format=posix -chf - \"$$tardir\""
+S["AMTAR"]="$${TAR-tar}"
+S["am__leading_dot"]="."
+S["SET_MAKE"]=""
+S["AWK"]="mawk"
+S["mkdir_p"]="$(MKDIR_P)"
+S["MKDIR_P"]="/usr/bin/mkdir -p"
+S["INSTALL_STRIP_PROGRAM"]="$(install_sh) -c -s"
+S["STRIP"]="strip"
+S["install_sh"]="${SHELL}
/home/enigma/Documents/Taler/donau/build-aux/install-sh"
+S["MAKEINFO"]="${SHELL} '/home/enigma/Documents/Taler/donau/build-aux/missing'
makeinfo"
+S["AUTOHEADER"]="${SHELL}
'/home/enigma/Documents/Taler/donau/build-aux/missing' autoheader"
+S["AUTOMAKE"]="${SHELL} '/home/enigma/Documents/Taler/donau/build-aux/missing'
automake-1.16"
+S["AUTOCONF"]="${SHELL} '/home/enigma/Documents/Taler/donau/build-aux/missing'
autoconf"
+S["ACLOCAL"]="${SHELL} '/home/enigma/Documents/Taler/donau/build-aux/missing'
aclocal-1.16"
+S["VERSION"]="0.9.2"
+S["PACKAGE"]="donau"
+S["CYGPATH_W"]="echo"
+S["am__isrc"]=""
+S["INSTALL_DATA"]="${INSTALL} -m 644"
+S["INSTALL_SCRIPT"]="${INSTALL}"
+S["INSTALL_PROGRAM"]="${INSTALL}"
+S["target_os"]="linux-gnu"
+S["target_vendor"]="pc"
+S["target_cpu"]="x86_64"
+S["target"]="x86_64-pc-linux-gnu"
+S["host_os"]="linux-gnu"
+S["host_vendor"]="pc"
+S["host_cpu"]="x86_64"
+S["host"]="x86_64-pc-linux-gnu"
+S["build_os"]="linux-gnu"
+S["build_vendor"]="pc"
+S["build_cpu"]="x86_64"
+S["build"]="x86_64-pc-linux-gnu"
+S["target_alias"]=""
+S["host_alias"]=""
+S["build_alias"]=""
+S["LIBS"]=""
+S["ECHO_T"]=""
+S["ECHO_N"]="-n"
+S["ECHO_C"]=""
+S["DEFS"]="-DHAVE_CONFIG_H"
+S["mandir"]="${datarootdir}/man"
+S["localedir"]="${datarootdir}/locale"
+S["libdir"]="${exec_prefix}/lib"
+S["psdir"]="${docdir}"
+S["pdfdir"]="${docdir}"
+S["dvidir"]="${docdir}"
+S["htmldir"]="${docdir}"
+S["infodir"]="${datarootdir}/info"
+S["docdir"]="${datarootdir}/doc/${PACKAGE_TARNAME}"
+S["oldincludedir"]="/usr/include"
+S["includedir"]="${prefix}/include"
+S["runstatedir"]="${localstatedir}/run"
+S["localstatedir"]="${prefix}/var"
+S["sharedstatedir"]="${prefix}/com"
+S["sysconfdir"]="${prefix}/etc"
+S["datadir"]="${datarootdir}"
+S["datarootdir"]="${prefix}/share"
+S["libexecdir"]="${exec_prefix}/libexec"
+S["sbindir"]="${exec_prefix}/sbin"
+S["bindir"]="${exec_prefix}/bin"
+S["program_transform_name"]="s,x,x,"
+S["prefix"]="/usr/local"
+S["exec_prefix"]="${prefix}"
+S["PACKAGE_URL"]=""
+S["PACKAGE_BUGREPORT"]="taler-bug@gnunet.org"
+S["PACKAGE_STRING"]="donau 0.9.2"
+S["PACKAGE_VERSION"]="0.9.2"
+S["PACKAGE_TARNAME"]="donau"
+S["PACKAGE_NAME"]="donau"
+S["PATH_SEPARATOR"]=":"
+S["SHELL"]="/bin/bash"
+S["am__quote"]=""
+_ACAWK
+cat >>"$ac_tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = ""
+
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+D["PACKAGE_NAME"]=" \"donau\""
+D["PACKAGE_TARNAME"]=" \"donau\""
+D["PACKAGE_VERSION"]=" \"0.9.2\""
+D["PACKAGE_STRING"]=" \"donau 0.9.2\""
+D["PACKAGE_BUGREPORT"]=" \"taler-bug@gnunet.org\""
+D["PACKAGE_URL"]=" \"\""
+D["PACKAGE"]=" \"donau\""
+D["VERSION"]=" \"0.9.2\""
+D["HAVE_STDIO_H"]=" 1"
+D["HAVE_STDLIB_H"]=" 1"
+D["HAVE_STRING_H"]=" 1"
+D["HAVE_INTTYPES_H"]=" 1"
+D["HAVE_STDINT_H"]=" 1"
+D["HAVE_STRINGS_H"]=" 1"
+D["HAVE_SYS_STAT_H"]=" 1"
+D["HAVE_SYS_TYPES_H"]=" 1"
+D["HAVE_UNISTD_H"]=" 1"
+D["STDC_HEADERS"]=" 1"
+D["HAVE_DLFCN_H"]=" 1"
+D["LT_OBJDIR"]=" \".libs/\""
+D["HAVE_UNSIGNED_LONG_LONG_INT"]=" 1"
+D["HAVE_LONG_LONG_INT"]=" 1"
+D["HAVE_STDINT_H"]=" 1"
+D["HAVE_STDLIB_H"]=" 1"
+D["HAVE_STRING_H"]=" 1"
+D["HAVE_UNISTD_H"]=" 1"
+D["HAVE_SYS_SOCKET_H"]=" 1"
+D["HAVE_SYS_UN_H"]=" 1"
+D["HAVE_NETINET_IN_H"]=" 1"
+D["HAVE_NETINET_IP_H"]=" 1"
+D["NEED_LIBGCRYPT_VERSION"]=" \"1.6.1\""
+D["EPOLL_SUPPORT"]=" 1"
+D["HAVE_EPOLL_CREATE1"]=" 1"
+D["HAVE_GNUNET_GNUNET_UTIL_LIB_H"]=" 1"
+D["HAVE_GNUNET_GNUNET_JSON_LIB_H"]=" 1"
+D["ENABLE_NLS"]=" 1"
+D["HAVE_GETTEXT"]=" 1"
+D["HAVE_DCGETTEXT"]=" 1"
+D["HAVE_LIBCURL"]=" 1"
+D["LIBCURL_FEATURE_ASYNCHDNS"]=" 1"
+D["LIBCURL_FEATURE_GSS_API"]=" 1"
+D["LIBCURL_FEATURE_HSTS"]=" 1"
+D["LIBCURL_FEATURE_HTTP2"]=" 1"
+D["LIBCURL_FEATURE_HTTPS_PROXY"]=" 1"
+D["LIBCURL_FEATURE_IDN"]=" 1"
+D["LIBCURL_FEATURE_IPV6"]=" 1"
+D["LIBCURL_FEATURE_KERBEROS"]=" 1"
+D["LIBCURL_FEATURE_LARGEFILE"]=" 1"
+D["LIBCURL_FEATURE_NTLM"]=" 1"
+D["LIBCURL_FEATURE_NTLM_WB"]=" 1"
+D["LIBCURL_FEATURE_PSL"]=" 1"
+D["LIBCURL_FEATURE_SPNEGO"]=" 1"
+D["LIBCURL_FEATURE_SSL"]=" 1"
+D["LIBCURL_FEATURE_TLS_SRP"]=" 1"
+D["LIBCURL_FEATURE_UNIXSOCKETS"]=" 1"
+D["LIBCURL_FEATURE_ALT_SVC"]=" 1"
+D["LIBCURL_FEATURE_BROTLI"]=" 1"
+D["LIBCURL_FEATURE_LIBZ"]=" 1"
+D["LIBCURL_FEATURE_THREADSAFE"]=" 1"
+D["LIBCURL_FEATURE_ZSTD"]=" 1"
+D["LIBCURL_PROTOCOL_DICT"]=" 1"
+D["LIBCURL_PROTOCOL_FILE"]=" 1"
+D["LIBCURL_PROTOCOL_FTP"]=" 1"
+D["LIBCURL_PROTOCOL_FTPS"]=" 1"
+D["LIBCURL_PROTOCOL_GOPHER"]=" 1"
+D["LIBCURL_PROTOCOL_GOPHERS"]=" 1"
+D["LIBCURL_PROTOCOL_HTTP"]=" 1"
+D["LIBCURL_PROTOCOL_HTTPS"]=" 1"
+D["LIBCURL_PROTOCOL_IMAP"]=" 1"
+D["LIBCURL_PROTOCOL_IMAPS"]=" 1"
+D["LIBCURL_PROTOCOL_LDAP"]=" 1"
+D["LIBCURL_PROTOCOL_LDAPS"]=" 1"
+D["LIBCURL_PROTOCOL_MQTT"]=" 1"
+D["LIBCURL_PROTOCOL_POP3"]=" 1"
+D["LIBCURL_PROTOCOL_POP3S"]=" 1"
+D["LIBCURL_PROTOCOL_RTMP"]=" 1"
+D["LIBCURL_PROTOCOL_RTSP"]=" 1"
+D["LIBCURL_PROTOCOL_SCP"]=" 1"
+D["LIBCURL_PROTOCOL_SFTP"]=" 1"
+D["LIBCURL_PROTOCOL_SMB"]=" 1"
+D["LIBCURL_PROTOCOL_SMBS"]=" 1"
+D["LIBCURL_PROTOCOL_SMTP"]=" 1"
+D["LIBCURL_PROTOCOL_SMTPS"]=" 1"
+D["LIBCURL_PROTOCOL_TELNET"]=" 1"
+D["LIBCURL_PROTOCOL_TFTP"]=" 1"
+D["HAVE_DECL_CURLINFO_TLS_SESSION"]=" 1"
+D["HAVE_LIBGNURL"]=" 0"
+D["HAVE_LIBCURL"]=" 1"
+D["HAVE_GNUNET_GNUNET_CURL_LIB_H"]=" 1"
+D["HAVE_POSTGRESQL"]=" 1"
+D["HAVE_LIBPQ_FE_H"]=" 1"
+D["HAVE_POSTGRESQL"]=" 1"
+D["HAVE_GNUNET_GNUNET_PQ_LIB_H"]=" 1"
+D["HAVE_GNUNET_GNUNET_SQ_LIB_H"]=" 1"
+D["HAVE_DEVELOPER"]=" 1"
+D["GNUNET_EXTRA_LOGGING"]=" 0"
+D["VCS_VERSION"]=" \"git-7519e05\""
+D["HAVE_INTMAX_T"]=" 1"
+D["HAVE_UINTMAX_T"]=" 1"
+D["HAVE_STRDUP"]=" 1"
+ for (key in D) D_is_set[key] = 1
+ FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t
]+[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*([\t
(]|$)/ {
+ line = $ 0
+ split(line, arg, " ")
+ if (arg[1] == "#") {
+ defundef = arg[2]
+ mac1 = arg[3]
+ } else {
+ defundef = substr(arg[1], 2)
+ mac1 = arg[2]
+ }
+ split(mac1, mac2, "(") #)
+ macro = mac2[1]
+ prefix = substr(line, 1, index(line, defundef) - 1)
+ if (D_is_set[macro]) {
+ # Preserve the white space surrounding the "#".
+ print prefix "define", macro P[macro] D[macro]
+ next
+ } else {
+ # Replace #undef with comments. This is necessary, for example,
+ # in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+ if (defundef == "undef") {
+ print "/*", prefix defundef, macro, "*/"
+ next
+ }
+ }
+}
+{ print }
+_ACAWK
+ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$ac_tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be
DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`printf "%s\n" "$ac_f" | sed
"s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ printf "%s\n" "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+printf "%s\n" "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`printf "%s\n" "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`printf "%s\n" "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`printf "%s\n" "$ac_dir_suffix" | sed
's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems
to ignore the --datarootdir setting" >&5
+printf "%s\n" "$as_me: WARNING: $ac_file_inputs seems to ignore the
--datarootdir setting" >&2;}
+ ac_datarootdir_hack='
+ s&@datadir@&${datarootdir}&g
+ s&@docdir@&${datarootdir}/doc/${PACKAGE_TARNAME}&g
+ s&@infodir@&${datarootdir}/info&g
+ s&@localedir@&${datarootdir}/locale&g
+ s&@mandir@&${datarootdir}/man&g
+ s&\${datarootdir}&${prefix}/share&g' ;;
+esac
+ac_sed_extra="/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[ ]*$//
+}
+
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
+ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a
reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&5
+printf "%s\n" "$as_me: WARNING: $ac_file contains a reference to the variable
\`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&2;}
+
+ rm -f "$ac_tmp/stdin"
+ case $ac_file in
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+ if test x"$ac_file" != x-; then
+ {
+ printf "%s\n" "/* $configure_input */" >&1 \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+ } >"$ac_tmp/config.h" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+printf "%s\n" "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f "$ac_file"
+ mv "$ac_tmp/config.h" "$ac_file" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ fi
+ else
+ printf "%s\n" "/* $configure_input */" >&1 \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+ || as_fn_error $? "could not create -" "$LINENO" 5
+ fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$_am_arg" : 'X\(//\)[^/]' \| \
+ X"$_am_arg" : 'X\(//\)$' \| \
+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$_am_arg" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+ :C) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: executing $ac_file
commands" >&5
+printf "%s\n" "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+ # Older Autoconf quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ # TODO: see whether this extra hack can be removed once we start
+ # requiring Autoconf 2.70 or later.
+ case $CONFIG_FILES in #(
+ *\'*) :
+ eval set x "$CONFIG_FILES" ;; #(
+ *) :
+ set x $CONFIG_FILES ;; #(
+ *) :
+ ;;
+esac
+ shift
+ # Used to flag and report bootstrapping failures.
+ am_rc=0
+ for am_mf
+ do
+ # Strip MF so we end up with the name of the file.
+ am_mf=`printf "%s\n" "$am_mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile which includes
+ # dependency-tracking related rules and includes.
+ # Grep'ing the whole file directly is not great: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
+ || continue
+ am_dirpart=`$as_dirname -- "$am_mf" ||
+$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$am_mf" : 'X\(//\)[^/]' \| \
+ X"$am_mf" : 'X\(//\)$' \| \
+ X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X"$am_mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ am_filepart=`$as_basename -- "$am_mf" ||
+$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$am_mf" : 'X\(//\)$' \| \
+ X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
+printf "%s\n" X/"$am_mf" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ { echo "$as_me:$LINENO: cd "$am_dirpart" \
+ && sed -e '/# am--include-marker/d' "$am_filepart" \
+ | $MAKE -f - am--depfiles" >&5
+ (cd "$am_dirpart" \
+ && sed -e '/# am--include-marker/d' "$am_filepart" \
+ | $MAKE -f - am--depfiles) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } || am_rc=$?
+ done
+ if test $am_rc -ne 0; then
+ { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "Something went wrong bootstrapping makefile fragments
+ for automatic dependency tracking. If GNU make was not used, consider
+ re-running the configure script with MAKE=\"gmake\" (or whatever is
+ necessary). You can also try re-running configure with the
+ '--disable-dependency-tracking' option to at least be able to build
+ the package (albeit without support for automatic dependency tracking).
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ { am_dirpart=; unset am_dirpart;}
+ { am_filepart=; unset am_filepart;}
+ { am_mf=; unset am_mf;}
+ { am_rc=; unset am_rc;}
+ rm -f conftest-deps.mk
+}
+ ;;
+ "libtool":C)
+
+ # See if we are running on zsh, and set the options that allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}"; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile=${ofile}T
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+# Generated automatically by $as_me ($PACKAGE) $VERSION
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the same
+# distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags=''
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shared archive member basename,for filename based shared library versioning
on AIX.
+shared_archive_member_spec=$shared_archive_member_spec
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# A file(cmd) program that detects file types.
+FILECMD=$lt_FILECMD
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method =
"file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive (by configure).
+lt_ar_flags=$lt_ar_flags
+
+# Flags to create an archive.
+AR_FLAGS=\${ARFLAGS-"\$lt_ar_flags"}
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is
needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# The name lister interface.
+nm_interface=$lt_lt_cv_nm_interface
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and where our libraries
should be installed.
+lt_sysroot=$lt_sysroot
+
+# Command to truncate a binary pipe.
+lt_truncate_bin=$lt_lt_cv_truncate_bin
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names. First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path
+
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x$2 in
+ x)
+ ;;
+ *:)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+ ;;
+ x:*)
+ eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+ ;;
+ *)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+
+
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in $*""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%;
s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test set != "${COLLECT_NAMES+set}"; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+
+
+ltmain=$ac_aux_dir/ltmain.sh
+
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ $SED '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+
+ ;;
+ "po-directories":C)
+ for ac_file in $CONFIG_FILES; do
+ # Support "outfile[:infile[:infile...]]"
+ case "$ac_file" in
+ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ esac
+ # PO directories have a Makefile.in generated from Makefile.in.in.
+ case "$ac_file" in */Makefile.in)
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+ # Treat a directory as a PO directory if and only if it has a
+ # POTFILES.in file. This allows packages to have multiple PO
+ # directories under different names or in different locations.
+ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+ rm -f "$ac_dir/POTFILES"
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo
"creating $ac_dir/POTFILES"
+ gt_tab=`printf '\t'`
+ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[
${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\)
\\\\/\1/" > "$ac_dir/POTFILES"
+ POMAKEFILEDEPS="POTFILES.in"
+ # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+ # on $ac_dir but don't depend on user-specified configuration
+ # parameters.
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in
configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is
obsolete"
+ fi
+ ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//"
"$ac_given_srcdir/$ac_dir/LINGUAS"`
+ # Hide the ALL_LINGUAS assignment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # The set of available languages was given in configure.in.
+ # Hide the ALL_LINGUAS assignment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
+ fi
+ # Compute POFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+ # Compute UPDATEPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+ # Compute DUMMYPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+ # Compute GMOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ GMOFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ done
+ fi
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo
"creating $ac_dir/Makefile"
+ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r
$ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e
"s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e
"s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e
"s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" >
"$ac_dir/Makefile"
+ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+ if test -f "$f"; then
+ case "$f" in
+ *.orig | *.bak | *~) ;;
+ *) cat "$f" >> "$ac_dir/Makefile" ;;
+ esac
+ fi
+ done
+ fi
+ ;;
+ esac
+ done ;;
+
+ esac
+done # for ac_tag
+
+
+as_fn_exit 0
diff --git a/contrib/gana b/contrib/gana
index ec6c821..91e5fd6 160000
--- a/contrib/gana
+++ b/contrib/gana
@@ -1 +1 @@
-Subproject commit ec6c82120f0c3dca85429b86652fd25d3c25a886
+Subproject commit 91e5fd6edb1b3567fd151960059ffb911973a447
diff --git a/contrib/sigp/donau_signatures.h b/contrib/sigp/donau_signatures.h
new file mode 100644
index 0000000..ca33718
--- /dev/null
+++ b/contrib/sigp/donau_signatures.h
@@ -0,0 +1,44 @@
+/*
+ This file is part of DONAU
+ Copyright (C) 2014-2022 Donau Systems SA
+
+ DONAU is free software; you can redistribute it and/or modify it under the
+ terms of the GNU General Public License as published by the Free Software
+ Foundation; either version 3, or (at your option) any later version.
+
+ DONAU is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
+ A PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along with
+ DONAU; see the file COPYING. If not, see <http://www.gnu.org/licenses/>
+*/
+/**
+ * @file donau_signatures.h
+ * @brief message formats and signature constants used to define
+ * the binary formats of signatures in Donau
+ *
+ * This file should define the constants and C structs that one needs
+ * to know to implement Donau clients (wallets or merchants or
+ * auditor) that need to produce or verify Donau signatures.
+ */
+#ifndef DONAU_SIGNATURES_H
+#define DONAU_SIGNATURES_H
+
+
+
+
+
+/**
+ * The signature is done by the Donau. The Donau signes over the total amount
of the corresponding year, the corresponding year and the donation identifier
of a specific donor. The statement confirms that the donor made this total in
donations for the given year.
+ */
+#define DONAU_SIGNATURE_DONAU_DONATION_STATEMENT 1500
+
+
+/**
+ * The signature is made by a charity and shows that the charity is in
agreement with the donation request which it sends to the Donau. The charity
signs over all blinded identifiers and key pairs which it has received from the
donor. The signature affirms that the charity wants the donation receipts to be
issued on its behalf.
+ */
+#define DONAU_SIGNATURE_CHARITY_DONATION_CONFIRMATION 1501
+
+
+#endif
diff --git a/contrib/sigp/donau_signatures.h.tmp
b/contrib/sigp/donau_signatures.h.tmp
new file mode 100644
index 0000000..879c998
--- /dev/null
+++ b/contrib/sigp/donau_signatures.h.tmp
@@ -0,0 +1,12 @@
+
+
+/**
+ * The signature is done by the Donau. The Donau signes over the total amount
of the corresponding year, the corresponding year and the donation identifier
of a specific donor. The statement confirms that the donor made this total in
donations for the given year.
+ */
+#define DONAU_SIGNATURE_DONAU_DONATION_STATEMENT 1500
+
+
+/**
+ * The signature is made by a charity and shows that the charity is in
agreement with the donation request which it sends to the Donau. The charity
signs over all blinded identifiers and key pairs which it has received from the
donor. The signature affirms that the charity wants the donation receipts to be
issued on its behalf.
+ */
+#define DONAU_SIGNATURE_CHARITY_DONATION_CONFIRMATION 1501
diff --git a/libtool b/libtool
new file mode 100755
index 0000000..70ebd3a
--- /dev/null
+++ b/libtool
@@ -0,0 +1,11951 @@
+#! /bin/bash
+# Generated automatically by config.status (donau) 0.9.2
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the same
+# distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags=''
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: ${LT_SYS_LIBRARY_PATH=""}
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=2.4.7
+macro_revision=2.4.7
+
+# Whether or not to build static libraries.
+build_old_libs=no
+
+# Whether or not to build shared libraries.
+build_libtool_libs=yes
+
+# What type of objects to build.
+pic_mode=default
+
+# Whether or not to optimize for fast installation.
+fast_install=needless
+
+# Shared archive member basename,for filename based shared library versioning
on AIX.
+shared_archive_member_spec=
+
+# Shell to use when invoking shell scripts.
+SHELL="/bin/bash"
+
+# An echo program that protects backslashes.
+ECHO="printf %s\\n"
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=":"
+
+# The host system.
+host_alias=
+host=x86_64-pc-linux-gnu
+host_os=linux-gnu
+
+# The build system.
+build_alias=
+build=x86_64-pc-linux-gnu
+build_os=linux-gnu
+
+# A sed program that does not truncate output.
+SED="/usr/bin/sed"
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP="/usr/bin/grep"
+
+# An ERE matcher.
+EGREP="/usr/bin/grep -E"
+
+# A literal string matcher.
+FGREP="/usr/bin/grep -F"
+
+# A BSD- or MS-compatible name lister.
+NM="/usr/bin/nm -B"
+
+# Whether we need soft or hard links.
+LN_S="ln -s"
+
+# What is the maximum length of a command?
+max_cmd_len=1572864
+
+# Object file suffix (normally "o").
+objext=o
+
+# Executable file suffix (normally "").
+exeext=
+
+# whether the shell understands "unset".
+lt_unset=unset
+
+# turn spaces into newlines.
+SP2NL="tr \\040 \\012"
+
+# turn newlines into spaces.
+NL2SP="tr \\015\\012 \\040\\040"
+
+# convert $build file names to $host format.
+to_host_file_cmd=func_convert_file_noop
+
+# convert $build files to toolchain format.
+to_tool_file_cmd=func_convert_file_noop
+
+# A file(cmd) program that detects file types.
+FILECMD="file"
+
+# An object symbol dumper.
+OBJDUMP="objdump"
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method="pass_all"
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd="\$MAGIC_CMD"
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=""
+
+# Find potential files using nocaseglob when deplibs_check_method =
"file_magic".
+want_nocaseglob="no"
+
+# DLL creation program.
+DLLTOOL="false"
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd="printf %s\\n"
+
+# The archiver.
+AR="ar"
+
+# Flags to create an archive (by configure).
+lt_ar_flags=cr
+
+# Flags to create an archive.
+AR_FLAGS=${ARFLAGS-"$lt_ar_flags"}
+
+# How to feed a file listing to the archiver.
+archiver_list_spec="@"
+
+# A symbol stripping program.
+STRIP="strip"
+
+# Commands used to install an old-style archive.
+RANLIB="ranlib"
+old_postinstall_cmds="chmod 644 \$oldlib~\$RANLIB \$tool_oldlib"
+old_postuninstall_cmds=""
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=no
+
+# A C compiler.
+LTCC="gcc"
+
+# LTCC compiler flags.
+LTCFLAGS="-Wall -Wno-address-of-packed-member -g -O2"
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe="/usr/bin/sed -n -e 's/^.*[
]\\([ABCDGIRSTW][ABCDGIRSTW]*\\)[ ][
]*\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2 \\2/p' | /usr/bin/sed '/ __gnu_lto/d'"
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl="/usr/bin/sed -n -e 's/^T .* \\(.*\\)\$/extern int
\\1();/p' -e 's/^[ABCDGIRSTW][ABCDGIRSTW]* .* \\(.*\\)\$/extern char \\1;/p'"
+
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=""
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address="/usr/bin/sed -n -e 's/^: \\(.*\\) .*\$/
{\"\\1\", (void *) 0},/p' -e 's/^[ABCDGIRSTW][ABCDGIRSTW]* .* \\(.*\\)\$/
{\"\\1\", (void *) \\&\\1},/p'"
+
+# Transform the output of nm in a C name address pair when lib prefix is
needed.
+global_symbol_to_c_name_address_lib_prefix="/usr/bin/sed -n -e 's/^: \\(.*\\)
.*\$/ {\"\\1\", (void *) 0},/p' -e 's/^[ABCDGIRSTW][ABCDGIRSTW]* .*
\\(lib.*\\)\$/ {\"\\1\", (void *) \\&\\1},/p' -e 's/^[ABCDGIRSTW][ABCDGIRSTW]*
.* \\(.*\\)\$/ {\"lib\\1\", (void *) \\&\\1},/p'"
+
+# The name lister interface.
+nm_interface="BSD nm"
+
+# Specify filename containing input files for $NM.
+nm_file_list_spec="@"
+
+# The root where to search for dependent libraries,and where our libraries
should be installed.
+lt_sysroot=
+
+# Command to truncate a binary pipe.
+lt_truncate_bin="/usr/bin/dd bs=4096 count=1"
+
+# The name of the directory that contains temporary libtool files.
+objdir=.libs
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=file
+
+# Must we lock files when doing compilation?
+need_locks="no"
+
+# Manifest tool.
+MANIFEST_TOOL=":"
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=""
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=""
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=""
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=""
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=""
+
+# Old archive suffix (normally "a").
+libext=a
+
+# Shared library suffix (normally ".so").
+shrext_cmds=".so"
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=""
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink="PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX
COMPILER_PATH LIBRARY_PATH"
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=no
+
+# Do we need a version for libraries?
+need_version=no
+
+# Library versioning type.
+version_type=linux
+
+# Shared library runtime path variable.
+runpath_var=LD_RUN_PATH
+
+# Shared library path variable.
+shlibpath_var=LD_LIBRARY_PATH
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=yes
+
+# Format of library name prefix.
+libname_spec="lib\$name"
+
+# List of archive names. First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec="\$libname\$release\$shared_ext\$versuffix
\$libname\$release\$shared_ext\$major \$libname\$shared_ext"
+
+# The coded name of the library, if different from the real name.
+soname_spec="\$libname\$release\$shared_ext\$major"
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=""
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=""
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=""
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir"
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=""
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=yes
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec="/usr/lib/gcc/x86_64-linux-gnu/12
/usr/lib/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib "
+
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec="/lib /usr/lib
/usr/lib/x86_64-linux-gnu/libfakeroot /usr/local/lib
/usr/local/lib/x86_64-linux-gnu /lib/x86_64-linux-gnu /usr/lib/x86_64-linux-gnu
"
+
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=""
+
+# Whether dlopen is supported.
+dlopen_support=yes
+
+# Whether dlopen of programs is supported.
+dlopen_self=yes
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=no
+
+# Commands to strip libraries.
+old_striplib="strip --strip-debug"
+striplib="strip --strip-unneeded"
+
+
+# The linker used to build libraries.
+LD="/usr/bin/ld -m elf_x86_64"
+
+# How to create reloadable object files.
+reload_flag=" -r"
+reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs"
+
+# Commands used to build an old-style archive.
+old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs~\$RANLIB \$tool_oldlib"
+
+# A language specific compiler.
+CC="gcc"
+
+# Is the compiler the GNU compiler?
+with_gcc=yes
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=" -fno-builtin"
+
+# Additional compiler flags for building library objects.
+pic_flag=" -fPIC -DPIC"
+
+# How to pass a linker flag through the compiler.
+wl="-Wl,"
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag="-static"
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o="yes"
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=no
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=no
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec="\$wl--export-dynamic"
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec="\$wl--whole-archive\$convenience
\$wl--no-whole-archive"
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object="no"
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=""
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=""
+
+# Commands used to build a shared archive.
+archive_cmds="\$CC -shared \$pic_flag \$libobjs \$deplibs \$compiler_flags
\$wl-soname \$wl\$soname -o \$lib"
+archive_expsym_cmds="echo \\\"{ global:\\\" > \$output_objdir/\$libname.ver~
+ cat \$export_symbols | \$SED -e \\\"s/\\\\(.*\\\\)/\\\\1;/\\\" >>
\$output_objdir/\$libname.ver~
+ echo \\\"local: *; };\\\" >> \$output_objdir/\$libname.ver~
+ \$CC -shared \$pic_flag \$libobjs \$deplibs \$compiler_flags
\$wl-soname \$wl\$soname \$wl-version-script \$wl\$output_objdir/\$libname.ver
-o \$lib"
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=""
+module_expsym_cmds=""
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld="yes"
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=""
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=""
+
+# Flag to hardcode $libdir into a binary during linking.
+# This must work even if $libdir does not exist
+hardcode_libdir_flag_spec="\$wl-rpath \$wl\$libdir"
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=""
+
+# Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=no
+
+# Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting $shlibpath_var if the
+# library is relocated.
+hardcode_direct_absolute=no
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=no
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=unsupported
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=no
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=no
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=no
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=no
+
+# The commands to list exported symbols.
+export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe |
\$SED 's/.* //' | sort | uniq > \$export_symbols"
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*"
+
+# Symbols that must always be exported.
+include_expsyms=""
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=""
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=""
+
+# Specify filename containing input files.
+file_list_spec=""
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=immediate
+
+# ### END LIBTOOL CONFIG
+
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x$2 in
+ x)
+ ;;
+ *:)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+ ;;
+ x:*)
+ eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+ ;;
+ *)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+
+
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in $*""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%;
s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+#! /usr/bin/env sh
+## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
+## by inline-source v2019-02-19.15
+
+# libtool (GNU libtool) 2.4.7
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996-2019, 2021-2022 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION="2.4.7 Debian-2.4.7-5"
+package_revision=2.4.7
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Run './libtool --help' for help with using this script from the
+# command line.
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# After configure completes, it has a better idea of some of the
+# shell tools we need than the defaults used by the functions shared
+# with bootstrap, so set those here where they can still be over-
+# ridden by the user, but otherwise take precedence.
+
+: ${AUTOCONF="autoconf"}
+: ${AUTOMAKE="automake"}
+
+
+## -------------------------- ##
+## Source external libraries. ##
+## -------------------------- ##
+
+# Much of our low-level functionality needs to be sourced from external
+# libraries, which are installed to $pkgauxdir.
+
+# Set a version string for this script.
+scriptversion=2019-02-19.15; # UTC
+
+# General shell script boiler plate, and helper functions.
+# Written by Gary V. Vaughan, 2004
+
+# This is free software. There is NO warranty; not even for
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#
+# Copyright (C) 2004-2019, 2021 Bootstrap Authors
+#
+# This file is dual licensed under the terms of the MIT license
+# <https://opensource.org/license/MIT>, and GPL version 2 or later
+# <http://www.gnu.org/licenses/gpl-2.0.html>. You must apply one of
+# these licenses when using or redistributing this software or any of
+# the files within it. See the URLs above, or the file `LICENSE`
+# included in the Bootstrap distribution for the full license texts.
+
+# Please report bugs or propose patches to:
+# <https://github.com/gnulib-modules/bootstrap/issues>
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Evaluate this file near the top of your script to gain access to
+# the functions and variables defined here:
+#
+# . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
+#
+# If you need to override any of the default environment variable
+# settings, do that before evaluating this file.
+
+
+## -------------------- ##
+## Shell normalisation. ##
+## -------------------- ##
+
+# Some shells need a little help to be as Bourne compatible as possible.
+# Before doing anything else, make sure all that help has been provided!
+
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
+fi
+
+# NLS nuisances: We save the old values in case they are required later.
+_G_user_locale=
+_G_safe_locale=
+for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+ eval "if test set = \"\${$_G_var+set}\"; then
+ save_$_G_var=\$$_G_var
+ $_G_var=C
+ export $_G_var
+ _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
+ _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
+ fi"
+done
+# These NLS vars are set unconditionally (bootstrap issue #24). Unset those
+# in case the environment reset is needed later and the $save_* variant is not
+# defined (see the code above).
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
+
+# Make sure IFS has a sensible default
+sp=' '
+nl='
+'
+IFS="$sp $nl"
+
+# There are apparently some retarded systems that use ';' as a PATH separator!
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# func_unset VAR
+# --------------
+# Portably unset VAR.
+# In some shells, an 'unset VAR' statement leaves a non-zero return
+# status if VAR is already unset, which might be problematic if the
+# statement is used at the end of a function (thus poisoning its return
+# value) or when 'set -e' is active (causing even a spurious abort of
+# the script in this case).
+func_unset ()
+{
+ { eval $1=; (eval unset $1) >/dev/null 2>&1 && eval unset $1 || : ; }
+}
+
+
+# Make sure CDPATH doesn't cause `cd` commands to output the target dir.
+func_unset CDPATH
+
+# Make sure ${,E,F}GREP behave sanely.
+func_unset GREP_OPTIONS
+
+
+## ------------------------- ##
+## Locate command utilities. ##
+## ------------------------- ##
+
+
+# func_executable_p FILE
+# ----------------------
+# Check that FILE is an executable regular file.
+func_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+}
+
+
+# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
+# --------------------------------------------
+# Search for either a program that responds to --version with output
+# containing "GNU", or else returned by CHECK_FUNC otherwise, by
+# trying all the directories in PATH with each of the elements of
+# PROGS_LIST.
+#
+# CHECK_FUNC should accept the path to a candidate program, and
+# set $func_check_prog_result if it truncates its output less than
+# $_G_path_prog_max characters.
+func_path_progs ()
+{
+ _G_progs_list=$1
+ _G_check_func=$2
+ _G_PATH=${3-"$PATH"}
+
+ _G_path_prog_max=0
+ _G_path_prog_found=false
+ _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
+ for _G_dir in $_G_PATH; do
+ IFS=$_G_save_IFS
+ test -z "$_G_dir" && _G_dir=.
+ for _G_prog_name in $_G_progs_list; do
+ for _exeext in '' .EXE; do
+ _G_path_prog=$_G_dir/$_G_prog_name$_exeext
+ func_executable_p "$_G_path_prog" || continue
+ case `"$_G_path_prog" --version 2>&1` in
+ *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
+ *) $_G_check_func $_G_path_prog
+ func_path_progs_result=$func_check_prog_result
+ ;;
+ esac
+ $_G_path_prog_found && break 3
+ done
+ done
+ done
+ IFS=$_G_save_IFS
+ test -z "$func_path_progs_result" && {
+ echo "no acceptable sed could be found in \$PATH" >&2
+ exit 1
+ }
+}
+
+
+# We want to be able to use the functions in this file before configure
+# has figured out where the best binaries are kept, which means we have
+# to search for them ourselves - except when the results are already set
+# where we skip the searches.
+
+# Unless the user overrides by setting SED, search the path for either GNU
+# sed, or the sed that truncates its output the least.
+test -z "$SED" && {
+
_G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for _G_i in 1 2 3 4 5 6 7; do
+ _G_sed_script=$_G_sed_script$nl$_G_sed_script
+ done
+ echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
+ _G_sed_script=
+
+ func_check_prog_sed ()
+ {
+ _G_path_prog=$1
+
+ _G_count=0
+ printf 0123456789 >conftest.in
+ while :
+ do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo '' >> conftest.nl
+ "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null
|| break
+ diff conftest.out conftest.nl >/dev/null 2>&1 || break
+ _G_count=`expr $_G_count + 1`
+ if test "$_G_count" -gt "$_G_path_prog_max"; then
+ # Best one so far, save it but keep looking for a better one
+ func_check_prog_result=$_G_path_prog
+ _G_path_prog_max=$_G_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test 10 -lt "$_G_count" && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out
+ }
+
+ func_path_progs "sed gsed" func_check_prog_sed "$PATH:/usr/xpg4/bin"
+ rm -f conftest.sed
+ SED=$func_path_progs_result
+}
+
+
+# Unless the user overrides by setting GREP, search the path for either GNU
+# grep, or the grep that truncates its output the least.
+test -z "$GREP" && {
+ func_check_prog_grep ()
+ {
+ _G_path_prog=$1
+
+ _G_count=0
+ _G_path_prog_max=0
+ printf 0123456789 >conftest.in
+ while :
+ do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo 'GREP' >> conftest.nl
+ "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl
>conftest.out 2>/dev/null || break
+ diff conftest.out conftest.nl >/dev/null 2>&1 || break
+ _G_count=`expr $_G_count + 1`
+ if test "$_G_count" -gt "$_G_path_prog_max"; then
+ # Best one so far, save it but keep looking for a better one
+ func_check_prog_result=$_G_path_prog
+ _G_path_prog_max=$_G_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test 10 -lt "$_G_count" && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out
+ }
+
+ func_path_progs "grep ggrep" func_check_prog_grep "$PATH:/usr/xpg4/bin"
+ GREP=$func_path_progs_result
+}
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# All uppercase variable names are used for environment variables. These
+# variables can be overridden by the user before calling a script that
+# uses them if a suitable command of that name is not already available
+# in the command search PATH.
+
+: ${CP="cp -f"}
+: ${ECHO="printf %s\n"}
+: ${EGREP="$GREP -E"}
+: ${FGREP="$GREP -F"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+
+
+## -------------------- ##
+## Useful sed snippets. ##
+## -------------------- ##
+
+sed_dirname='s|/[^/]*$||'
+sed_basename='s|^.*/||'
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s|\([`"$\\]\)|\\\1|g'
+
+# Same as above, but do not quote variable references.
+sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'
+
+# Sed substitution that converts a w32 file name or path
+# that contains forward slashes, into one that contains
+# (escaped) backslashes. A very naive implementation.
+sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-'\' parameter expansions in output of sed_double_quote_subst that
+# were '\'-ed in input to the same. If an odd number of '\' preceded a
+# '$' in input to sed_double_quote_subst, that '$' was protected from
+# expansion. Since each input '\' is now two '\'s, look for any number
+# of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'.
+_G_bs='\\'
+_G_bs2='\\\\'
+_G_bs4='\\\\\\\\'
+_G_dollar='\$'
+sed_double_backslash="\
+ s/$_G_bs4/&\\
+/g
+ s/^$_G_bs2$_G_dollar/$_G_bs&/
+ s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
+ s/\n//g"
+
+# require_check_ifs_backslash
+# ---------------------------
+# Check if we can use backslash as IFS='\' separator, and set
+# $check_ifs_backshlash_broken to ':' or 'false'.
+require_check_ifs_backslash=func_require_check_ifs_backslash
+func_require_check_ifs_backslash ()
+{
+ _G_save_IFS=$IFS
+ IFS='\'
+ _G_check_ifs_backshlash='a\\b'
+ for _G_i in $_G_check_ifs_backshlash
+ do
+ case $_G_i in
+ a)
+ check_ifs_backshlash_broken=false
+ ;;
+ '')
+ break
+ ;;
+ *)
+ check_ifs_backshlash_broken=:
+ break
+ ;;
+ esac
+ done
+ IFS=$_G_save_IFS
+ require_check_ifs_backslash=:
+}
+
+
+## ----------------- ##
+## Global variables. ##
+## ----------------- ##
+
+# Except for the global variables explicitly listed below, the following
+# functions in the '^func_' namespace, and the '^require_' namespace
+# variables initialised in the 'Resource management' section, sourcing
+# this file will not pollute your global namespace with anything
+# else. There's no portable way to scope variables in Bourne shell
+# though, so actually running these functions will sometimes place
+# results into a variable named after the function, and often use
+# temporary variables in the '^_G_' namespace. If you are careful to
+# avoid using those namespaces casually in your sourcing script, things
+# should continue to work as you expect. And, of course, you can freely
+# overwrite any of the functions or variables defined here before
+# calling anything to customize them.
+
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+
+# Allow overriding, eg assuming that you follow the convention of
+# putting '$debug_cmd' at the start of all your functions, you can get
+# bash to show function call trace with:
+#
+# debug_cmd='echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
+debug_cmd=${debug_cmd-":"}
+exit_cmd=:
+
+# By convention, finish your script with:
+#
+# exit $exit_status
+#
+# so that you can set exit_status to non-zero if you want to indicate
+# something went wrong during execution without actually bailing out at
+# the point of failure.
+exit_status=$EXIT_SUCCESS
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath=$0
+
+# The name of this program.
+progname=`$ECHO "$progpath" |$SED "$sed_basename"`
+
+# Make sure we have an absolute progpath for reexecution:
+case $progpath in
+ [\\/]*|[A-Za-z]:\\*) ;;
+ *[\\/]*)
+ progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
+ progdir=`cd "$progdir" && pwd`
+ progpath=$progdir/$progname
+ ;;
+ *)
+ _G_IFS=$IFS
+ IFS=${PATH_SEPARATOR-:}
+ for progdir in $PATH; do
+ IFS=$_G_IFS
+ test -x "$progdir/$progname" && break
+ done
+ IFS=$_G_IFS
+ test -n "$progdir" || progdir=`pwd`
+ progpath=$progdir/$progname
+ ;;
+esac
+
+
+## ----------------- ##
+## Standard options. ##
+## ----------------- ##
+
+# The following options affect the operation of the functions defined
+# below, and should be set appropriately depending on run-time para-
+# meters passed on the command line.
+
+opt_dry_run=false
+opt_quiet=false
+opt_verbose=false
+
+# Categories 'all' and 'none' are always available. Append any others
+# you will pass as the first argument to func_warning from your own
+# code.
+warning_categories=
+
+# By default, display warnings according to 'opt_warning_types'. Set
+# 'warning_func' to ':' to elide all warnings, or func_fatal_error to
+# treat the next displayed warning as a fatal error.
+warning_func=func_warn_and_continue
+
+# Set to 'all' to display all warnings, 'none' to suppress all
+# warnings, or a space delimited list of some subset of
+# 'warning_categories' to display only the listed warnings.
+opt_warning_types=all
+
+
+## -------------------- ##
+## Resource management. ##
+## -------------------- ##
+
+# This section contains definitions for functions that each ensure a
+# particular resource (a file, or a non-empty configuration variable for
+# example) is available, and if appropriate to extract default values
+# from pertinent package files. Call them using their associated
+# 'require_*' variable to ensure that they are executed, at most, once.
+#
+# It's entirely deliberate that calling these functions can set
+# variables that don't obey the namespace limitations obeyed by the rest
+# of this file, in order that that they be as useful as possible to
+# callers.
+
+
+# require_term_colors
+# -------------------
+# Allow display of bold text on terminals that support it.
+require_term_colors=func_require_term_colors
+func_require_term_colors ()
+{
+ $debug_cmd
+
+ test -t 1 && {
+ # COLORTERM and USE_ANSI_COLORS environment variables take
+ # precedence, because most terminfo databases neglect to describe
+ # whether color sequences are supported.
+ test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
+
+ if test 1 = "$USE_ANSI_COLORS"; then
+ # Standard ANSI escape sequences
+ tc_reset='[0m'
+ tc_bold='[1m'; tc_standout='[7m'
+ tc_red='[31m'; tc_green='[32m'
+ tc_blue='[34m'; tc_cyan='[36m'
+ else
+ # Otherwise trust the terminfo database after all.
+ test -n "`tput sgr0 2>/dev/null`" && {
+ tc_reset=`tput sgr0`
+ test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
+ tc_standout=$tc_bold
+ test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
+ test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
+ test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
+ test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
+ test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
+ }
+ fi
+ }
+
+ require_term_colors=:
+}
+
+
+## ----------------- ##
+## Function library. ##
+## ----------------- ##
+
+# This section contains a variety of useful functions to call in your
+# scripts. Take note of the portable wrappers for features provided by
+# some modern shells, which will fall back to slower equivalents on
+# less featureful shells.
+
+
+# func_append VAR VALUE
+# ---------------------
+# Append VALUE onto the existing contents of VAR.
+
+ # We should try to minimise forks, especially on Windows where they are
+ # unreasonably slow, so skip the feature probes when bash or zsh are
+ # being used:
+ if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
+ : ${_G_HAVE_ARITH_OP="yes"}
+ : ${_G_HAVE_XSI_OPS="yes"}
+ # The += operator was introduced in bash 3.1
+ case $BASH_VERSION in
+ [12].* | 3.0 | 3.0*) ;;
+ *)
+ : ${_G_HAVE_PLUSEQ_OP="yes"}
+ ;;
+ esac
+ fi
+
+ # _G_HAVE_PLUSEQ_OP
+ # Can be empty, in which case the shell is probed, "yes" if += is
+ # useable or anything else if it does not work.
+ test -z "$_G_HAVE_PLUSEQ_OP" \
+ && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
+ && _G_HAVE_PLUSEQ_OP=yes
+
+if test yes = "$_G_HAVE_PLUSEQ_OP"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_append ()
+ {
+ $debug_cmd
+
+ eval "$1+=\$2"
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_append ()
+ {
+ $debug_cmd
+
+ eval "$1=\$$1\$2"
+ }
+fi
+
+
+# func_append_quoted VAR VALUE
+# ----------------------------
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+if test yes = "$_G_HAVE_PLUSEQ_OP"; then
+ eval 'func_append_quoted ()
+ {
+ $debug_cmd
+
+ func_quote_arg pretty "$2"
+ eval "$1+=\\ \$func_quote_arg_result"
+ }'
+else
+ func_append_quoted ()
+ {
+ $debug_cmd
+
+ func_quote_arg pretty "$2"
+ eval "$1=\$$1\\ \$func_quote_arg_result"
+ }
+fi
+
+
+# func_append_uniq VAR VALUE
+# --------------------------
+# Append unique VALUE onto the existing contents of VAR, assuming
+# entries are delimited by the first character of VALUE. For example:
+#
+# func_append_uniq options " --another-option option-argument"
+#
+# will only append to $options if " --another-option option-argument "
+# is not already present somewhere in $options already (note spaces at
+# each end implied by leading space in second argument).
+func_append_uniq ()
+{
+ $debug_cmd
+
+ eval _G_current_value='`$ECHO $'$1'`'
+ _G_delim=`expr "$2" : '\(.\)'`
+
+ case $_G_delim$_G_current_value$_G_delim in
+ *"$2$_G_delim"*) ;;
+ *) func_append "$@" ;;
+ esac
+}
+
+
+# func_arith TERM...
+# ------------------
+# Set func_arith_result to the result of evaluating TERMs.
+ test -z "$_G_HAVE_ARITH_OP" \
+ && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
+ && _G_HAVE_ARITH_OP=yes
+
+if test yes = "$_G_HAVE_ARITH_OP"; then
+ eval 'func_arith ()
+ {
+ $debug_cmd
+
+ func_arith_result=$(( $* ))
+ }'
+else
+ func_arith ()
+ {
+ $debug_cmd
+
+ func_arith_result=`expr "$@"`
+ }
+fi
+
+
+# func_basename FILE
+# ------------------
+# Set func_basename_result to FILE with everything up to and including
+# the last / stripped.
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ # If this shell supports suffix pattern removal, then use it to avoid
+ # forking. Hide the definitions single quotes in case the shell chokes
+ # on unsupported syntax...
+ _b='func_basename_result=${1##*/}'
+ _d='case $1 in
+ */*) func_dirname_result=${1%/*}$2 ;;
+ * ) func_dirname_result=$3 ;;
+ esac'
+
+else
+ # ...otherwise fall back to using sed.
+ _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
+ _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"`
+ if test "X$func_dirname_result" = "X$1"; then
+ func_dirname_result=$3
+ else
+ func_append func_dirname_result "$2"
+ fi'
+fi
+
+eval 'func_basename ()
+{
+ $debug_cmd
+
+ '"$_b"'
+}'
+
+
+# func_dirname FILE APPEND NONDIR_REPLACEMENT
+# -------------------------------------------
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+eval 'func_dirname ()
+{
+ $debug_cmd
+
+ '"$_d"'
+}'
+
+
+# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
+# --------------------------------------------------------
+# Perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# For efficiency, we do not delegate to the functions above but instead
+# duplicate the functionality here.
+eval 'func_dirname_and_basename ()
+{
+ $debug_cmd
+
+ '"$_b"'
+ '"$_d"'
+}'
+
+
+# func_echo ARG...
+# ----------------
+# Echo program name prefixed message.
+func_echo ()
+{
+ $debug_cmd
+
+ _G_message=$*
+
+ func_echo_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_IFS
+ $ECHO "$progname: $_G_line"
+ done
+ IFS=$func_echo_IFS
+}
+
+
+# func_echo_all ARG...
+# --------------------
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+
+# func_echo_infix_1 INFIX ARG...
+# ------------------------------
+# Echo program name, followed by INFIX on the first line, with any
+# additional lines not showing INFIX.
+func_echo_infix_1 ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ _G_infix=$1; shift
+ _G_indent=$_G_infix
+ _G_prefix="$progname: $_G_infix: "
+ _G_message=$*
+
+ # Strip color escape sequences before counting printable length
+ for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green"
"$tc_blue" "$tc_cyan"
+ do
+ test -n "$_G_tc" && {
+ _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
+ _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
+ }
+ done
+ _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude
from sc_prohibit_nested_quotes
+
+ func_echo_infix_1_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_infix_1_IFS
+ $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
+ _G_prefix=$_G_indent
+ done
+ IFS=$func_echo_infix_1_IFS
+}
+
+
+# func_error ARG...
+# -----------------
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2
+}
+
+
+# func_fatal_error ARG...
+# -----------------------
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ $debug_cmd
+
+ func_error "$*"
+ exit $EXIT_FAILURE
+}
+
+
+# func_grep EXPRESSION FILENAME
+# -----------------------------
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+ $debug_cmd
+
+ $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_len STRING
+# ---------------
+# Set func_len_result to the length of STRING. STRING may not
+# start with a hyphen.
+ test -z "$_G_HAVE_XSI_OPS" \
+ && (eval 'x=a/b/c;
+ test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+ && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_len ()
+ {
+ $debug_cmd
+
+ func_len_result=${#1}
+ }'
+else
+ func_len ()
+ {
+ $debug_cmd
+
+ func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+ }
+fi
+
+
+# func_mkdir_p DIRECTORY-PATH
+# ---------------------------
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+ $debug_cmd
+
+ _G_directory_path=$1
+ _G_dir_list=
+
+ if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
+
+ # Protect directory names starting with '-'
+ case $_G_directory_path in
+ -*) _G_directory_path=./$_G_directory_path ;;
+ esac
+
+ # While some portion of DIR does not yet exist...
+ while test ! -d "$_G_directory_path"; do
+ # ...make a list in topmost first order. Use a colon delimited
+ # list incase some portion of path contains whitespace.
+ _G_dir_list=$_G_directory_path:$_G_dir_list
+
+ # If the last portion added has no slash in it, the list is done
+ case $_G_directory_path in */*) ;; *) break ;; esac
+
+ # ...otherwise throw away the child directory and loop
+ _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
+ done
+ _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
+
+ func_mkdir_p_IFS=$IFS; IFS=:
+ for _G_dir in $_G_dir_list; do
+ IFS=$func_mkdir_p_IFS
+ # mkdir can fail with a 'File exist' error if two processes
+ # try to create one of the directories concurrently. Don't
+ # stop in that case!
+ $MKDIR "$_G_dir" 2>/dev/null || :
+ done
+ IFS=$func_mkdir_p_IFS
+
+ # Bail out if we (or some other process) failed to create a directory.
+ test -d "$_G_directory_path" || \
+ func_fatal_error "Failed to create '$1'"
+ fi
+}
+
+
+# func_mktempdir [BASENAME]
+# -------------------------
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible. If
+# given, BASENAME is the basename for that directory.
+func_mktempdir ()
+{
+ $debug_cmd
+
+ _G_template=${TMPDIR-/tmp}/${1-$progname}
+
+ if test : = "$opt_dry_run"; then
+ # Return a directory name, but don't create it in dry-run mode
+ _G_tmpdir=$_G_template-$$
+ else
+
+ # If mktemp works, use that first and foremost
+ _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
+
+ if test ! -d "$_G_tmpdir"; then
+ # Failing that, at least try and use $RANDOM to avoid a race
+ _G_tmpdir=$_G_template-${RANDOM-0}$$
+
+ func_mktempdir_umask=`umask`
+ umask 0077
+ $MKDIR "$_G_tmpdir"
+ umask $func_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$_G_tmpdir" || \
+ func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
+ fi
+
+ $ECHO "$_G_tmpdir"
+}
+
+
+# func_normal_abspath PATH
+# ------------------------
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+func_normal_abspath ()
+{
+ $debug_cmd
+
+ # These SED scripts presuppose an absolute path with a trailing slash.
+ _G_pathcar='s|^/\([^/]*\).*$|\1|'
+ _G_pathcdr='s|^/[^/]*||'
+ _G_removedotparts=':dotsl
+ s|/\./|/|g
+ t dotsl
+ s|/\.$|/|'
+ _G_collapseslashes='s|/\{1,\}|/|g'
+ _G_finalslash='s|/*$|/|'
+
+ # Start from root dir and reassemble the path.
+ func_normal_abspath_result=
+ func_normal_abspath_tpath=$1
+ func_normal_abspath_altnamespace=
+ case $func_normal_abspath_tpath in
+ "")
+ # Empty path, that just means $cwd.
+ func_stripname '' '/' "`pwd`"
+ func_normal_abspath_result=$func_stripname_result
+ return
+ ;;
+ # The next three entries are used to spot a run of precisely
+ # two leading slashes without using negated character classes;
+ # we take advantage of case's first-match behaviour.
+ ///*)
+ # Unusual form of absolute path, do nothing.
+ ;;
+ //*)
+ # Not necessarily an ordinary path; POSIX reserves leading '//'
+ # and for example Cygwin uses it to access remote file shares
+ # over CIFS/SMB, so we conserve a leading double slash if found.
+ func_normal_abspath_altnamespace=/
+ ;;
+ /*)
+ # Absolute path, do nothing.
+ ;;
+ *)
+ # Relative path, prepend $cwd.
+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+ ;;
+ esac
+
+ # Cancel out all the simple stuff to save iterations. We also want
+ # the path to end with a slash for ease of parsing, so make sure
+ # there is one (and only one) here.
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
+ while :; do
+ # Processed it all yet?
+ if test / = "$func_normal_abspath_tpath"; then
+ # If we ascended to the root using ".." the result may be empty now.
+ if test -z "$func_normal_abspath_result"; then
+ func_normal_abspath_result=/
+ fi
+ break
+ fi
+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" |
$SED \
+ -e "$_G_pathcar"`
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_pathcdr"`
+ # Figure out what to do with it
+ case $func_normal_abspath_tcomponent in
+ "")
+ # Trailing empty path component, ignore it.
+ ;;
+ ..)
+ # Parent dir; strip last assembled component from result.
+ func_dirname "$func_normal_abspath_result"
+ func_normal_abspath_result=$func_dirname_result
+ ;;
+ *)
+ # Actual path component, append it.
+ func_append func_normal_abspath_result
"/$func_normal_abspath_tcomponent"
+ ;;
+ esac
+ done
+ # Restore leading double-slash if one was found on entry.
+
func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+
+# func_notquiet ARG...
+# --------------------
+# Echo program name prefixed message only when not in quiet mode.
+func_notquiet ()
+{
+ $debug_cmd
+
+ $opt_quiet || func_echo ${1+"$@"}
+
+ # A bug in bash halts the script if the last line of a function
+ # fails when set -e is in force, so we need another command to
+ # work around that:
+ :
+}
+
+
+# func_relative_path SRCDIR DSTDIR
+# --------------------------------
+# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
+func_relative_path ()
+{
+ $debug_cmd
+
+ func_relative_path_result=
+ func_normal_abspath "$1"
+ func_relative_path_tlibdir=$func_normal_abspath_result
+ func_normal_abspath "$2"
+ func_relative_path_tbindir=$func_normal_abspath_result
+
+ # Ascend the tree starting from libdir
+ while :; do
+ # check if we have found a prefix of bindir
+ case $func_relative_path_tbindir in
+ $func_relative_path_tlibdir)
+ # found an exact match
+ func_relative_path_tcancelled=
+ break
+ ;;
+ $func_relative_path_tlibdir*)
+ # found a matching prefix
+ func_stripname "$func_relative_path_tlibdir" ''
"$func_relative_path_tbindir"
+ func_relative_path_tcancelled=$func_stripname_result
+ if test -z "$func_relative_path_result"; then
+ func_relative_path_result=.
+ fi
+ break
+ ;;
+ *)
+ func_dirname $func_relative_path_tlibdir
+ func_relative_path_tlibdir=$func_dirname_result
+ if test -z "$func_relative_path_tlibdir"; then
+ # Have to descend all the way to the root!
+ func_relative_path_result=../$func_relative_path_result
+ func_relative_path_tcancelled=$func_relative_path_tbindir
+ break
+ fi
+ func_relative_path_result=../$func_relative_path_result
+ ;;
+ esac
+ done
+
+ # Now calculate path; take care to avoid doubling-up slashes.
+ func_stripname '' '/' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ func_stripname '/' '/' "$func_relative_path_tcancelled"
+ if test -n "$func_stripname_result"; then
+ func_append func_relative_path_result "/$func_stripname_result"
+ fi
+
+ # Normalisation. If bindir is libdir, return '.' else relative path.
+ if test -n "$func_relative_path_result"; then
+ func_stripname './' '' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ fi
+
+ test -n "$func_relative_path_result" || func_relative_path_result=.
+
+ :
+}
+
+
+# func_quote_portable EVAL ARG
+# ----------------------------
+# Internal function to portably implement func_quote_arg. Note that we still
+# keep attention to performance here so we as much as possible try to avoid
+# calling sed binary (so far O(N) complexity as long as func_append is O(1)).
+func_quote_portable ()
+{
+ $debug_cmd
+
+ $require_check_ifs_backslash
+
+ func_quote_portable_result=$2
+
+ # one-time-loop (easy break)
+ while true
+ do
+ if $1; then
+ func_quote_portable_result=`$ECHO "$2" | $SED \
+ -e "$sed_double_quote_subst" -e "$sed_double_backslash"`
+ break
+ fi
+
+ # Quote for eval.
+ case $func_quote_portable_result in
+ *[\\\`\"\$]*)
+ # Fallback to sed for $func_check_bs_ifs_broken=:, or when the string
+ # contains the shell wildcard characters.
+ case $check_ifs_backshlash_broken$func_quote_portable_result in
+ :*|*[\[\*\?]*)
+ func_quote_portable_result=`$ECHO "$func_quote_portable_result" \
+ | $SED "$sed_quote_subst"`
+ break
+ ;;
+ esac
+
+ func_quote_portable_old_IFS=$IFS
+ for _G_char in '\' '`' '"' '$'
+ do
+ # STATE($1) PREV($2) SEPARATOR($3)
+ set start "" ""
+
func_quote_portable_result=dummy"$_G_char$func_quote_portable_result$_G_char"dummy
+ IFS=$_G_char
+ for _G_part in $func_quote_portable_result
+ do
+ case $1 in
+ quote)
+ func_append func_quote_portable_result "$3$2"
+ set quote "$_G_part" "\\$_G_char"
+ ;;
+ start)
+ set first "" ""
+ func_quote_portable_result=
+ ;;
+ first)
+ set quote "$_G_part" ""
+ ;;
+ esac
+ done
+ done
+ IFS=$func_quote_portable_old_IFS
+ ;;
+ *) ;;
+ esac
+ break
+ done
+
+ func_quote_portable_unquoted_result=$func_quote_portable_result
+ case $func_quote_portable_result in
+ # double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and variable expansion
+ # for a subsequent eval.
+ # many bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ func_quote_portable_result=\"$func_quote_portable_result\"
+ ;;
+ esac
+}
+
+
+# func_quotefast_eval ARG
+# -----------------------
+# Quote one ARG (internal). This is equivalent to 'func_quote_arg eval ARG',
+# but optimized for speed. Result is stored in $func_quotefast_eval.
+if test xyes = `(x=; printf -v x %q yes; echo x"$x") 2>/dev/null`; then
+ printf -v _GL_test_printf_tilde %q '~'
+ if test '\~' = "$_GL_test_printf_tilde"; then
+ func_quotefast_eval ()
+ {
+ printf -v func_quotefast_eval_result %q "$1"
+ }
+ else
+ # Broken older Bash implementations. Make those faster too if possible.
+ func_quotefast_eval ()
+ {
+ case $1 in
+ '~'*)
+ func_quote_portable false "$1"
+ func_quotefast_eval_result=$func_quote_portable_result
+ ;;
+ *)
+ printf -v func_quotefast_eval_result %q "$1"
+ ;;
+ esac
+ }
+ fi
+else
+ func_quotefast_eval ()
+ {
+ func_quote_portable false "$1"
+ func_quotefast_eval_result=$func_quote_portable_result
+ }
+fi
+
+
+# func_quote_arg MODEs ARG
+# ------------------------
+# Quote one ARG to be evaled later. MODEs argument may contain zero or more
+# specifiers listed below separated by ',' character. This function returns
two
+# values:
+# i) func_quote_arg_result
+# double-quoted (when needed), suitable for a subsequent eval
+# ii) func_quote_arg_unquoted_result
+# has all characters that are still active within double
+# quotes backslashified. Available only if 'unquoted' is specified.
+#
+# Available modes:
+# ----------------
+# 'eval' (default)
+# - escape shell special characters
+# 'expand'
+# - the same as 'eval'; but do not quote variable references
+# 'pretty'
+# - request aesthetic output, i.e. '"a b"' instead of 'a\ b'. This might
+# be used later in func_quote to get output like: 'echo "a b"' instead
+# of 'echo a\ b'. This is slower than default on some shells.
+# 'unquoted'
+# - produce also $func_quote_arg_unquoted_result which does not contain
+# wrapping double-quotes.
+#
+# Examples for 'func_quote_arg pretty,unquoted string':
+#
+# string | *_result | *_unquoted_result
+# ------------+-----------------------+-------------------
+# " | \" | \"
+# a b | "a b" | a b
+# "a b" | "\"a b\"" | \"a b\"
+# * | "*" | *
+# z="${x-$y}" | "z=\"\${x-\$y}\"" | z=\"\${x-\$y}\"
+#
+# Examples for 'func_quote_arg pretty,unquoted,expand string':
+#
+# string | *_result | *_unquoted_result
+# --------------+---------------------+--------------------
+# z="${x-$y}" | "z=\"${x-$y}\"" | z=\"${x-$y}\"
+func_quote_arg ()
+{
+ _G_quote_expand=false
+ case ,$1, in
+ *,expand,*)
+ _G_quote_expand=:
+ ;;
+ esac
+
+ case ,$1, in
+ *,pretty,*|*,expand,*|*,unquoted,*)
+ func_quote_portable $_G_quote_expand "$2"
+ func_quote_arg_result=$func_quote_portable_result
+ func_quote_arg_unquoted_result=$func_quote_portable_unquoted_result
+ ;;
+ *)
+ # Faster quote-for-eval for some shells.
+ func_quotefast_eval "$2"
+ func_quote_arg_result=$func_quotefast_eval_result
+ ;;
+ esac
+}
+
+
+# func_quote MODEs ARGs...
+# ------------------------
+# Quote all ARGs to be evaled later and join them into single command. See
+# func_quote_arg's description for more info.
+func_quote ()
+{
+ $debug_cmd
+ _G_func_quote_mode=$1 ; shift
+ func_quote_result=
+ while test 0 -lt $#; do
+ func_quote_arg "$_G_func_quote_mode" "$1"
+ if test -n "$func_quote_result"; then
+ func_append func_quote_result " $func_quote_arg_result"
+ else
+ func_append func_quote_result "$func_quote_arg_result"
+ fi
+ shift
+ done
+}
+
+
+# func_stripname PREFIX SUFFIX NAME
+# ---------------------------------
+# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_stripname ()
+ {
+ $debug_cmd
+
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary variable first.
+ func_stripname_result=$3
+ func_stripname_result=${func_stripname_result#"$1"}
+ func_stripname_result=${func_stripname_result%"$2"}
+ }'
+else
+ func_stripname ()
+ {
+ $debug_cmd
+
+ case $2 in
+ .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e
"s%\\\\$2\$%%"`;;
+ *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e
"s%$2\$%%"`;;
+ esac
+ }
+fi
+
+
+# func_show_eval CMD [FAIL_EXP]
+# -----------------------------
+# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+ $debug_cmd
+
+ _G_cmd=$1
+ _G_fail_exp=${2-':'}
+
+ func_quote_arg pretty,expand "$_G_cmd"
+ eval "func_notquiet $func_quote_arg_result"
+
+ $opt_dry_run || {
+ eval "$_G_cmd"
+ _G_status=$?
+ if test 0 -ne "$_G_status"; then
+ eval "(exit $_G_status); $_G_fail_exp"
+ fi
+ }
+}
+
+
+# func_show_eval_locale CMD [FAIL_EXP]
+# ------------------------------------
+# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+ $debug_cmd
+
+ _G_cmd=$1
+ _G_fail_exp=${2-':'}
+
+ $opt_quiet || {
+ func_quote_arg expand,pretty "$_G_cmd"
+ eval "func_echo $func_quote_arg_result"
+ }
+
+ $opt_dry_run || {
+ eval "$_G_user_locale
+ $_G_cmd"
+ _G_status=$?
+ eval "$_G_safe_locale"
+ if test 0 -ne "$_G_status"; then
+ eval "(exit $_G_status); $_G_fail_exp"
+ fi
+ }
+}
+
+
+# func_tr_sh
+# ----------
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result. All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+ $debug_cmd
+
+ case $1 in
+ [0-9]* | *[!a-zA-Z0-9_]*)
+ func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e
's/[^a-zA-Z0-9_]/_/g'`
+ ;;
+ * )
+ func_tr_sh_result=$1
+ ;;
+ esac
+}
+
+
+# func_verbose ARG...
+# -------------------
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+ $debug_cmd
+
+ $opt_verbose && func_echo "$*"
+
+ :
+}
+
+
+# func_warn_and_continue ARG...
+# -----------------------------
+# Echo program name prefixed warning message to standard error.
+func_warn_and_continue ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
+}
+
+
+# func_warning CATEGORY ARG...
+# ----------------------------
+# Echo program name prefixed warning message to standard error. Warning
+# messages can be filtered according to CATEGORY, where this function
+# elides messages where CATEGORY is not listed in the global variable
+# 'opt_warning_types'.
+func_warning ()
+{
+ $debug_cmd
+
+ # CATEGORY must be in the warning_categories list!
+ case " $warning_categories " in
+ *" $1 "*) ;;
+ *) func_internal_error "invalid warning category '$1'" ;;
+ esac
+
+ _G_category=$1
+ shift
+
+ case " $opt_warning_types " in
+ *" $_G_category "*) $warning_func ${1+"$@"} ;;
+ esac
+}
+
+
+# func_sort_ver VER1 VER2
+# -----------------------
+# 'sort -V' is not generally available.
+# Note this deviates from the version comparison in automake
+# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# but this should suffice as we won't be specifying old
+# version formats or redundant trailing .0 in bootstrap.conf.
+# If we did want full compatibility then we should probably
+# use m4_version_compare from autoconf.
+func_sort_ver ()
+{
+ $debug_cmd
+
+ printf '%s\n%s\n' "$1" "$2" \
+ | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k
8,8n -k 9,9n
+}
+
+# func_lt_ver PREV CURR
+# ---------------------
+# Return true if PREV and CURR are in the correct order according to
+# func_sort_ver, otherwise false. Use it like this:
+#
+# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
+func_lt_ver ()
+{
+ $debug_cmd
+
+ test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+#! /bin/sh
+
+# A portable, pluggable option parser for Bourne shell.
+# Written by Gary V. Vaughan, 2010
+
+# This is free software. There is NO warranty; not even for
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#
+# Copyright (C) 2010-2019, 2021 Bootstrap Authors
+#
+# This file is dual licensed under the terms of the MIT license
+# <https://opensource.org/license/MIT>, and GPL version 2 or later
+# <http://www.gnu.org/licenses/gpl-2.0.html>. You must apply one of
+# these licenses when using or redistributing this software or any of
+# the files within it. See the URLs above, or the file `LICENSE`
+# included in the Bootstrap distribution for the full license texts.
+
+# Please report bugs or propose patches to:
+# <https://github.com/gnulib-modules/bootstrap/issues>
+
+# Set a version string for this script.
+scriptversion=2019-02-19.15; # UTC
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# This file is a library for parsing options in your shell scripts along
+# with assorted other useful supporting features that you can make use
+# of too.
+#
+# For the simplest scripts you might need only:
+#
+# #!/bin/sh
+# . relative/path/to/funclib.sh
+# . relative/path/to/options-parser
+# scriptversion=1.0
+# func_options ${1+"$@"}
+# eval set dummy "$func_options_result"; shift
+# ...rest of your script...
+#
+# In order for the '--version' option to work, you will need to have a
+# suitably formatted comment like the one at the top of this file
+# starting with '# Written by ' and ending with '# Copyright'.
+#
+# For '-h' and '--help' to work, you will also need a one line
+# description of your script's purpose in a comment directly above the
+# '# Written by ' line, like the one at the top of this file.
+#
+# The default options also support '--debug', which will turn on shell
+# execution tracing (see the comment above debug_cmd below for another
+# use), and '--verbose' and the func_verbose function to allow your script
+# to display verbose messages only when your user has specified
+# '--verbose'.
+#
+# After sourcing this file, you can plug in processing for additional
+# options by amending the variables from the 'Configuration' section
+# below, and following the instructions in the 'Option parsing'
+# section further down.
+
+## -------------- ##
+## Configuration. ##
+## -------------- ##
+
+# You should override these variables in your script after sourcing this
+# file so that they reflect the customisations you have added to the
+# option parser.
+
+# The usage line for option parsing errors and the start of '-h' and
+# '--help' output messages. You can embed shell variables for delayed
+# expansion at the time the message is displayed, but you will need to
+# quote other shell meta-characters carefully to prevent them being
+# expanded when the contents are evaled.
+usage='$progpath [OPTION]...'
+
+# Short help message in response to '-h' and '--help'. Add to this or
+# override it after sourcing this library to reflect the full set of
+# options your script accepts.
+usage_message="\
+ --debug enable verbose shell tracing
+ -W, --warnings=CATEGORY
+ report the warnings falling in CATEGORY [all]
+ -v, --verbose verbosely report processing
+ --version print version information and exit
+ -h, --help print short or long help message and exit
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+long_help_message="
+Warning categories include:
+ 'all' show all warnings
+ 'none' turn off all the warnings
+ 'error' warnings are treated as fatal errors"
+
+# Help message printed before fatal option parsing errors.
+fatal_help="Try '\$progname --help' for more information."
+
+
+
+## ------------------------- ##
+## Hook function management. ##
+## ------------------------- ##
+
+# This section contains functions for adding, removing, and running hooks
+# in the main code. A hook is just a list of function names that can be
+# run in order later on.
+
+# func_hookable FUNC_NAME
+# -----------------------
+# Declare that FUNC_NAME will run hooks added with
+# 'func_add_hook FUNC_NAME ...'.
+func_hookable ()
+{
+ $debug_cmd
+
+ func_append hookable_fns " $1"
+}
+
+
+# func_add_hook FUNC_NAME HOOK_FUNC
+# ---------------------------------
+# Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must
+# first have been declared "hookable" by a call to 'func_hookable'.
+func_add_hook ()
+{
+ $debug_cmd
+
+ case " $hookable_fns " in
+ *" $1 "*) ;;
+ *) func_fatal_error "'$1' does not accept hook functions." ;;
+ esac
+
+ eval func_append ${1}_hooks '" $2"'
+}
+
+
+# func_remove_hook FUNC_NAME HOOK_FUNC
+# ------------------------------------
+# Remove HOOK_FUNC from the list of hook functions to be called by
+# FUNC_NAME.
+func_remove_hook ()
+{
+ $debug_cmd
+
+ eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
+}
+
+
+# func_propagate_result FUNC_NAME_A FUNC_NAME_B
+# ---------------------------------------------
+# If the *_result variable of FUNC_NAME_A _is set_, assign its value to
+# *_result variable of FUNC_NAME_B.
+func_propagate_result ()
+{
+ $debug_cmd
+
+ func_propagate_result_result=:
+ if eval "test \"\${${1}_result+set}\" = set"
+ then
+ eval "${2}_result=\$${1}_result"
+ else
+ func_propagate_result_result=false
+ fi
+}
+
+
+# func_run_hooks FUNC_NAME [ARG]...
+# ---------------------------------
+# Run all hook functions registered to FUNC_NAME.
+# It's assumed that the list of hook functions contains nothing more
+# than a whitespace-delimited list of legal shell function names, and
+# no effort is wasted trying to catch shell meta-characters or preserve
+# whitespace.
+func_run_hooks ()
+{
+ $debug_cmd
+
+ _G_rc_run_hooks=false
+
+ case " $hookable_fns " in
+ *" $1 "*) ;;
+ *) func_fatal_error "'$1' does not support hook functions." ;;
+ esac
+
+ eval _G_hook_fns=\$$1_hooks; shift
+
+ for _G_hook in $_G_hook_fns; do
+ func_unset "${_G_hook}_result"
+ eval $_G_hook '${1+"$@"}'
+ func_propagate_result $_G_hook func_run_hooks
+ if $func_propagate_result_result; then
+ eval set dummy "$func_run_hooks_result"; shift
+ fi
+ done
+}
+
+
+
+## --------------- ##
+## Option parsing. ##
+## --------------- ##
+
+# In order to add your own option parsing hooks, you must accept the
+# full positional parameter list from your hook function. You may remove
+# or edit any options that you action, and then pass back the remaining
+# unprocessed options in '<hooked_function_name>_result', escaped
+# suitably for 'eval'.
+#
+# The '<hooked_function_name>_result' variable is automatically unset
+# before your hook gets called; for best performance, only set the
+# *_result variable when necessary (i.e. don't call the 'func_quote'
+# function unnecessarily because it can be an expensive operation on some
+# machines).
+#
+# Like this:
+#
+# my_options_prep ()
+# {
+# $debug_cmd
+#
+# # Extend the existing usage message.
+# usage_message=$usage_message'
+# -s, --silent don'\''t print informational messages
+# '
+# # No change in '$@' (ignored completely by this hook). Leave
+# # my_options_prep_result variable intact.
+# }
+# func_add_hook func_options_prep my_options_prep
+#
+#
+# my_silent_option ()
+# {
+# $debug_cmd
+#
+# args_changed=false
+#
+# # Note that, for efficiency, we parse as many options as we can
+# # recognise in a loop before passing the remainder back to the
+# # caller on the first unrecognised argument we encounter.
+# while test $# -gt 0; do
+# opt=$1; shift
+# case $opt in
+# --silent|-s) opt_silent=:
+# args_changed=:
+# ;;
+# # Separate non-argument short options:
+# -s*) func_split_short_opt "$_G_opt"
+# set dummy "$func_split_short_opt_name" \
+# "-$func_split_short_opt_arg" ${1+"$@"}
+# shift
+# args_changed=:
+# ;;
+# *) # Make sure the first unrecognised option "$_G_opt"
+# # is added back to "$@" in case we need it later,
+# # if $args_changed was set to 'true'.
+# set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+# esac
+# done
+#
+# # Only call 'func_quote' here if we processed at least one argument.
+# if $args_changed; then
+# func_quote eval ${1+"$@"}
+# my_silent_option_result=$func_quote_result
+# fi
+# }
+# func_add_hook func_parse_options my_silent_option
+#
+#
+# my_option_validation ()
+# {
+# $debug_cmd
+#
+# $opt_silent && $opt_verbose && func_fatal_help "\
+# '--silent' and '--verbose' options are mutually exclusive."
+# }
+# func_add_hook func_validate_options my_option_validation
+#
+# You'll also need to manually amend $usage_message to reflect the extra
+# options you parse. It's preferable to append if you can, so that
+# multiple option parsing hooks can be added safely.
+
+
+# func_options_finish [ARG]...
+# ----------------------------
+# Finishing the option parse loop (call 'func_options' hooks ATM).
+func_options_finish ()
+{
+ $debug_cmd
+
+ func_run_hooks func_options ${1+"$@"}
+ func_propagate_result func_run_hooks func_options_finish
+}
+
+
+# func_options [ARG]...
+# ---------------------
+# All the functions called inside func_options are hookable. See the
+# individual implementations for details.
+func_hookable func_options
+func_options ()
+{
+ $debug_cmd
+
+ _G_options_quoted=false
+
+ for my_func in options_prep parse_options validate_options options_finish
+ do
+ func_unset func_${my_func}_result
+ func_unset func_run_hooks_result
+ eval func_$my_func '${1+"$@"}'
+ func_propagate_result func_$my_func func_options
+ if $func_propagate_result_result; then
+ eval set dummy "$func_options_result"; shift
+ _G_options_quoted=:
+ fi
+ done
+
+ $_G_options_quoted || {
+ # As we (func_options) are top-level options-parser function and
+ # nobody quoted "$@" for us yet, we need to do it explicitly for
+ # caller.
+ func_quote eval ${1+"$@"}
+ func_options_result=$func_quote_result
+ }
+}
+
+
+# func_options_prep [ARG]...
+# --------------------------
+# All initialisations required before starting the option parse loop.
+# Note that when calling hook functions, we pass through the list of
+# positional parameters. If a hook function modifies that list, and
+# needs to propagate that back to rest of this script, then the complete
+# modified list must be put in 'func_run_hooks_result' before returning.
+func_hookable func_options_prep
+func_options_prep ()
+{
+ $debug_cmd
+
+ # Option defaults:
+ opt_verbose=false
+ opt_warning_types=
+
+ func_run_hooks func_options_prep ${1+"$@"}
+ func_propagate_result func_run_hooks func_options_prep
+}
+
+
+# func_parse_options [ARG]...
+# ---------------------------
+# The main option parsing loop.
+func_hookable func_parse_options
+func_parse_options ()
+{
+ $debug_cmd
+
+ _G_parse_options_requote=false
+ # this just eases exit handling
+ while test $# -gt 0; do
+ # Defer to hook functions for initial option parsing, so they
+ # get priority in the event of reusing an option name.
+ func_run_hooks func_parse_options ${1+"$@"}
+ func_propagate_result func_run_hooks func_parse_options
+ if $func_propagate_result_result; then
+ eval set dummy "$func_parse_options_result"; shift
+ # Even though we may have changed "$@", we passed the "$@" array
+ # down into the hook and it quoted it for us (because we are in
+ # this if-branch). No need to quote it again.
+ _G_parse_options_requote=false
+ fi
+
+ # Break out of the loop if we already parsed every option.
+ test $# -gt 0 || break
+
+ # We expect that one of the options parsed in this function matches
+ # and thus we remove _G_opt from "$@" and need to re-quote.
+ _G_match_parse_options=:
+ _G_opt=$1
+ shift
+ case $_G_opt in
+ --debug|-x) debug_cmd='set -x'
+ func_echo "enabling shell trace mode" >&2
+ $debug_cmd
+ ;;
+
+ --no-warnings|--no-warning|--no-warn)
+ set dummy --warnings none ${1+"$@"}
+ shift
+ ;;
+
+ --warnings|--warning|-W)
+ if test $# = 0 && func_missing_arg $_G_opt; then
+ _G_parse_options_requote=:
+ break
+ fi
+ case " $warning_categories $1" in
+ *" $1 "*)
+ # trailing space prevents matching last $1 above
+ func_append_uniq opt_warning_types " $1"
+ ;;
+ *all)
+ opt_warning_types=$warning_categories
+ ;;
+ *none)
+ opt_warning_types=none
+ warning_func=:
+ ;;
+ *error)
+ opt_warning_types=$warning_categories
+ warning_func=func_fatal_error
+ ;;
+ *)
+ func_fatal_error \
+ "unsupported warning category: '$1'"
+ ;;
+ esac
+ shift
+ ;;
+
+ --verbose|-v) opt_verbose=: ;;
+ --version) func_version ;;
+ -\?|-h) func_usage ;;
+ --help) func_help ;;
+
+ # Separate optargs to long options (plugins may need this):
+ --*=*) func_split_equals "$_G_opt"
+ set dummy "$func_split_equals_lhs" \
+ "$func_split_equals_rhs" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate optargs to short options:
+ -W*)
+ func_split_short_opt "$_G_opt"
+ set dummy "$func_split_short_opt_name" \
+ "$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate non-argument short options:
+ -\?*|-h*|-v*|-x*)
+ func_split_short_opt "$_G_opt"
+ set dummy "$func_split_short_opt_name" \
+ "-$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ --) _G_parse_options_requote=: ; break ;;
+ -*) func_fatal_help "unrecognised option: '$_G_opt'" ;;
+ *) set dummy "$_G_opt" ${1+"$@"}; shift
+ _G_match_parse_options=false
+ break
+ ;;
+ esac
+
+ if $_G_match_parse_options; then
+ _G_parse_options_requote=:
+ fi
+ done
+
+ if $_G_parse_options_requote; then
+ # save modified positional parameters for caller
+ func_quote eval ${1+"$@"}
+ func_parse_options_result=$func_quote_result
+ fi
+}
+
+
+# func_validate_options [ARG]...
+# ------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+func_hookable func_validate_options
+func_validate_options ()
+{
+ $debug_cmd
+
+ # Display all warnings if -W was not given.
+ test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
+
+ func_run_hooks func_validate_options ${1+"$@"}
+ func_propagate_result func_run_hooks func_validate_options
+
+ # Bail if the options were screwed!
+ $exit_cmd $EXIT_FAILURE
+}
+
+
+
+## ----------------- ##
+## Helper functions. ##
+## ----------------- ##
+
+# This section contains the helper functions used by the rest of the
+# hookable option parser framework in ascii-betical order.
+
+
+# func_fatal_help ARG...
+# ----------------------
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+ $debug_cmd
+
+ eval \$ECHO \""Usage: $usage"\"
+ eval \$ECHO \""$fatal_help"\"
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
+}
+
+
+# func_help
+# ---------
+# Echo long help message to standard output and exit.
+func_help ()
+{
+ $debug_cmd
+
+ func_usage_message
+ $ECHO "$long_help_message"
+ exit 0
+}
+
+
+# func_missing_arg ARGNAME
+# ------------------------
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+ $debug_cmd
+
+ func_error "Missing argument for '$1'."
+ exit_cmd=exit
+}
+
+
+# func_split_equals STRING
+# ------------------------
+# Set func_split_equals_lhs and func_split_equals_rhs shell variables
+# after splitting STRING at the '=' sign.
+test -z "$_G_HAVE_XSI_OPS" \
+ && (eval 'x=a/b/c;
+ test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+ && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_split_equals ()
+ {
+ $debug_cmd
+
+ func_split_equals_lhs=${1%%=*}
+ func_split_equals_rhs=${1#*=}
+ if test "x$func_split_equals_lhs" = "x$1"; then
+ func_split_equals_rhs=
+ fi
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_split_equals ()
+ {
+ $debug_cmd
+
+ func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
+ func_split_equals_rhs=
+ test "x$func_split_equals_lhs=" = "x$1" \
+ || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
+ }
+fi #func_split_equals
+
+
+# func_split_short_opt SHORTOPT
+# -----------------------------
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_split_short_opt ()
+ {
+ $debug_cmd
+
+ func_split_short_opt_arg=${1#??}
+ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_split_short_opt ()
+ {
+ $debug_cmd
+
+ func_split_short_opt_name=`expr "x$1" : 'x\(-.\)'`
+ func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
+ }
+fi #func_split_short_opt
+
+
+# func_usage
+# ----------
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+ $debug_cmd
+
+ func_usage_message
+ $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
+ exit 0
+}
+
+
+# func_usage_message
+# ------------------
+# Echo short help message to standard output.
+func_usage_message ()
+{
+ $debug_cmd
+
+ eval \$ECHO \""Usage: $usage"\"
+ echo
+ $SED -n 's|^# ||
+ /^Written by/{
+ x;p;x
+ }
+ h
+ /^Written by/q' < "$progpath"
+ echo
+ eval \$ECHO \""$usage_message"\"
+}
+
+
+# func_version
+# ------------
+# Echo version message to standard output and exit.
+# The version message is extracted from the calling file's header
+# comments, with leading '# ' stripped:
+# 1. First display the progname and version
+# 2. Followed by the header comment line matching /^# Written by /
+# 3. Then a blank line followed by the first following line matching
+# /^# Copyright /
+# 4. Immediately followed by any lines between the previous matches,
+# except lines preceding the intervening completely blank line.
+# For example, see the header comments of this file.
+func_version ()
+{
+ $debug_cmd
+
+ printf '%s\n' "$progname $scriptversion"
+ $SED -n '
+ /^# Written by /!b
+ s|^# ||; p; n
+
+ :fwd2blnk
+ /./ {
+ n
+ b fwd2blnk
+ }
+ p; n
+
+ :holdwrnt
+ s|^# ||
+ s|^# *$||
+ /^Copyright /!{
+ /./H
+ n
+ b holdwrnt
+ }
+
+ s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
+ G
+ s|\(\n\)\n*|\1|g
+ p; q' < "$progpath"
+
+ exit $?
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "30/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+
+# Set a version string.
+scriptversion='(GNU libtool) 2.4.7'
+
+
+# func_echo ARG...
+# ----------------
+# Libtool also displays the current mode in messages, so override
+# funclib.sh func_echo with this custom definition.
+func_echo ()
+{
+ $debug_cmd
+
+ _G_message=$*
+
+ func_echo_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_IFS
+ $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
+ done
+ IFS=$func_echo_IFS
+}
+
+
+# func_warning ARG...
+# -------------------
+# Libtool warnings are not categorized, so override funclib.sh
+# func_warning with this simpler definition.
+func_warning ()
+{
+ $debug_cmd
+
+ $warning_func ${1+"$@"}
+}
+
+
+## ---------------- ##
+## Options parsing. ##
+## ---------------- ##
+
+# Hook in the functions to make sure our own options are parsed during
+# the option parsing loop.
+
+usage='$progpath [OPTION]... [MODE-ARG]...'
+
+# Short help message in response to '-h'.
+usage_message="Options:
+ --config show all configuration variables
+ --debug enable verbose shell tracing
+ -n, --dry-run display commands without modifying any files
+ --features display basic configuration information and exit
+ --mode=MODE use operation mode MODE
+ --no-warnings equivalent to '-Wnone'
+ --preserve-dup-deps don't remove duplicate dependency libraries
+ --quiet, --silent don't print informational messages
+ --tag=TAG use configuration variables from tag TAG
+ -v, --verbose print more informational messages than default
+ --version print version information
+ -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all]
+ -h, --help, --help-all print short, long, or detailed help message
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+func_help ()
+{
+ $debug_cmd
+
+ func_usage_message
+ $ECHO "$long_help_message
+
+MODE must be one of the following:
+
+ clean remove files from the build directory
+ compile compile a source file into a libtool object
+ execute automatically set library path, then run a program
+ finish complete the installation of libtool libraries
+ install install libraries or executables
+ link create a library or an executable
+ uninstall remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE. When passed as first option,
+'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
+Try '$progname --help --mode=MODE' for a more detailed description of MODE.
+
+When reporting a bug, please describe a test case to reproduce it and
+include the following information:
+
+ host-triplet: $host
+ shell: $SHELL
+ compiler: $LTCC
+ compiler flags: $LTCFLAGS
+ linker: $LD (gnu? $with_gnu_ld)
+ version: $progname $scriptversion Debian-2.4.7-5
+ automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
+ autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q`
+
+Report bugs to <bug-libtool@gnu.org>.
+GNU libtool home page: <http://www.gnu.org/s/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
+ exit 0
+}
+
+
+# func_lo2o OBJECT-NAME
+# ---------------------
+# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
+# object suffix.
+
+lo2o=s/\\.lo\$/.$objext/
+o2lo=s/\\.$objext\$/.lo/
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_lo2o ()
+ {
+ case $1 in
+ *.lo) func_lo2o_result=${1%.lo}.$objext ;;
+ * ) func_lo2o_result=$1 ;;
+ esac
+ }'
+
+ # func_xform LIBOBJ-OR-SOURCE
+ # ---------------------------
+ # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
+ # suffix to a '.lo' libtool-object suffix.
+ eval 'func_xform ()
+ {
+ func_xform_result=${1%.*}.lo
+ }'
+else
+ # ...otherwise fall back to using sed.
+ func_lo2o ()
+ {
+ func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
+ }
+
+ func_xform ()
+ {
+ func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
+ }
+fi
+
+
+# func_fatal_configuration ARG...
+# -------------------------------
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+ func_fatal_error ${1+"$@"} \
+ "See the $PACKAGE documentation for more information." \
+ "Fatal configuration error."
+}
+
+
+# func_config
+# -----------
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+ re_begincf='^# ### BEGIN LIBTOOL'
+ re_endcf='^# ### END LIBTOOL'
+
+ # Default configuration.
+ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+ # Now print the configurations for the tags.
+ for tagname in $taglist; do
+ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG:
$tagname\$/p" < "$progpath"
+ done
+
+ exit $?
+}
+
+
+# func_features
+# -------------
+# Display the features supported by this script.
+func_features ()
+{
+ echo "host: $host"
+ if test yes = "$build_libtool_libs"; then
+ echo "enable shared libraries"
+ else
+ echo "disable shared libraries"
+ fi
+ if test yes = "$build_old_libs"; then
+ echo "enable static libraries"
+ else
+ echo "disable static libraries"
+ fi
+
+ exit $?
+}
+
+
+# func_enable_tag TAGNAME
+# -----------------------
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+ # Global variable:
+ tagname=$1
+
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf=/$re_begincf/,/$re_endcf/p
+
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
+
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
+ *)
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
+
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
+}
+
+
+# func_check_version_match
+# ------------------------
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision
$package_revision,
+$progname: but the definition of this LT_INIT comes from revision
$macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision
$package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+ fi
+
+ exit $EXIT_MISMATCH
+ fi
+}
+
+
+# libtool_options_prep [ARG]...
+# -----------------------------
+# Preparation for options parsed by libtool.
+libtool_options_prep ()
+{
+ $debug_mode
+
+ # Option defaults:
+ opt_config=false
+ opt_dlopen=
+ opt_dry_run=false
+ opt_help=false
+ opt_mode=
+ opt_preserve_dup_deps=false
+ opt_quiet=false
+
+ nonopt=
+ preserve_args=
+
+ _G_rc_lt_options_prep=:
+
+ _G_rc_lt_options_prep=:
+
+ # Shorthand for --mode=foo, only valid as the first argument
+ case $1 in
+ clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+ compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+ execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+ finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+ link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+ *)
+ _G_rc_lt_options_prep=false
+ ;;
+ esac
+
+ if $_G_rc_lt_options_prep; then
+ # Pass back the list of options.
+ func_quote eval ${1+"$@"}
+ libtool_options_prep_result=$func_quote_result
+ fi
+}
+func_add_hook func_options_prep libtool_options_prep
+
+
+# libtool_parse_options [ARG]...
+# ---------------------------------
+# Provide handling for libtool specific options.
+libtool_parse_options ()
+{
+ $debug_cmd
+
+ _G_rc_lt_parse_options=false
+
+ # Perform our own loop to consume as many options as possible in
+ # each iteration.
+ while test $# -gt 0; do
+ _G_match_lt_parse_options=:
+ _G_opt=$1
+ shift
+ case $_G_opt in
+ --dry-run|--dryrun|-n)
+ opt_dry_run=:
+ ;;
+
+ --config) func_config ;;
+
+ --dlopen|-dlopen)
+ opt_dlopen="${opt_dlopen+$opt_dlopen
+}$1"
+ shift
+ ;;
+
+ --preserve-dup-deps)
+ opt_preserve_dup_deps=: ;;
+
+ --features) func_features ;;
+
+ --finish) set dummy --mode finish ${1+"$@"}; shift ;;
+
+ --help) opt_help=: ;;
+
+ --help-all) opt_help=': help-all' ;;
+
+ --mode) test $# = 0 && func_missing_arg $_G_opt && break
+ opt_mode=$1
+ case $1 in
+ # Valid mode arguments:
+
clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $_G_opt"
+ exit_cmd=exit
+ break
+ ;;
+ esac
+ shift
+ ;;
+
+ --no-silent|--no-quiet)
+ opt_quiet=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --no-warnings|--no-warning|--no-warn)
+ opt_warning=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --no-verbose)
+ opt_verbose=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --silent|--quiet)
+ opt_quiet=:
+ opt_verbose=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --tag) test $# = 0 && func_missing_arg $_G_opt && break
+ opt_tag=$1
+ func_append preserve_args " $_G_opt $1"
+ func_enable_tag "$1"
+ shift
+ ;;
+
+ --verbose|-v) opt_quiet=false
+ opt_verbose=:
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ # An option not handled by this hook function:
+ *) set dummy "$_G_opt" ${1+"$@"} ; shift
+ _G_match_lt_parse_options=false
+ break
+ ;;
+ esac
+ $_G_match_lt_parse_options && _G_rc_lt_parse_options=:
+ done
+
+ if $_G_rc_lt_parse_options; then
+ # save modified positional parameters for caller
+ func_quote eval ${1+"$@"}
+ libtool_parse_options_result=$func_quote_result
+ fi
+}
+func_add_hook func_parse_options libtool_parse_options
+
+
+
+# libtool_validate_options [ARG]...
+# ---------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+libtool_validate_options ()
+{
+ # save first non-option argument
+ if test 0 -lt $#; then
+ nonopt=$1
+ shift
+ fi
+
+ # preserve --debug
+ test : = "$debug_cmd" || func_append preserve_args " --debug"
+
+ case $host in
+ # Solaris2 added to fix
http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
+ # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
+ *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+ ;;
+ esac
+
+ $opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ test yes != "$build_libtool_libs" \
+ && test yes != "$build_old_libs" \
+ && func_fatal_configuration "not configured to build any kind of
library"
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
+ func_error "unrecognized option '-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help=$help
+ help="Try '$progname --help --mode=$opt_mode' for more information."
+ }
+
+ # Pass back the unparsed argument list
+ func_quote eval ${1+"$@"}
+ libtool_validate_options_result=$func_quote_result
+}
+func_add_hook func_validate_options libtool_validate_options
+
+
+# Process options as early as possible so that --help and --version
+# can return quickly.
+func_options ${1+"$@"}
+eval set dummy "$func_options_result"; shift
+
+
+
+## ----------- ##
+## Main. ##
+## ----------- ##
+
+magic='%%%MAGIC variable%%%'
+magic_exe='%%%MAGIC EXE variable%%%'
+
+# Global variables.
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# func_generated_by_libtool
+# True iff stdin has been generated by Libtool. This function is only
+# a basic sanity check; it will hardly flush out determined imposters.
+func_generated_by_libtool_p ()
+{
+ $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_p file
+# True iff FILE is a libtool '.la' library or '.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+ test -f "$1" &&
+ $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool '.la' library or '.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs. To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway. Works if 'file' does not exist.
+func_lalib_unsafe_p ()
+{
+ lalib_p=no
+ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+ for lalib_p_l in 1 2 3 4
+ do
+ read lalib_p_line
+ case $lalib_p_line in
+ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+ esac
+ done
+ exec 0<&5 5<&-
+ fi
+ test yes = "$lalib_p"
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+ test -f "$1" &&
+ $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+ func_ltwrapper_exec_suffix=
+ case $1 in
+ *.exe) ;;
+ *) func_ltwrapper_exec_suffix=.exe ;;
+ esac
+ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+ func_dirname_and_basename "$1" "" "."
+ func_stripname '' '.exe' "$func_basename_result"
+
func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+ $debug_cmd
+
+ save_ifs=$IFS; IFS='~'
+ for cmd in $1; do
+ IFS=$sp$nl
+ eval cmd=\"$cmd\"
+ IFS=$save_ifs
+ func_show_eval "$cmd" "${2-:}"
+ done
+ IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)! Also, sourcing
+# 'FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+ $debug_cmd
+
+ case $1 in
+ */* | *\\*) . "$1" ;;
+ *) . "./$1" ;;
+ esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot. Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+ func_resolve_sysroot_result=$1
+ case $func_resolve_sysroot_result in
+ =*)
+ func_stripname '=' '' "$func_resolve_sysroot_result"
+ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+ ;;
+ esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+ case $lt_sysroot:$1 in
+ ?*:"$lt_sysroot"*)
+ func_stripname "$lt_sysroot" '' "$1"
+ func_replace_sysroot_result='='$func_stripname_result
+ ;;
+ *)
+ # Including no sysroot.
+ func_replace_sysroot_result=$1
+ ;;
+ esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+ $debug_cmd
+
+ if test -n "$available_tags" && test -z "$tagname"; then
+ CC_quoted=
+ for arg in $CC; do
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+ case $@ in
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when configure was run.
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* |
"$CC_quoted_expanded "*) ;;
+ # Blanks at the start of $base_compile will cause this to fail
+ # if we don't check for them as well.
+ *)
+ for z in $available_tags; do
+ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" >
/dev/null; then
+ # Evaluate the configuration.
+ eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ###
END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ CC_quoted=
+ for arg in $CC; do
+ # Double-quote args containing other shell metacharacters.
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+ case "$@ " in
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* |
"$CC_quoted_expanded "*)
+ # The compiler in the base compile command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ esac
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ func_echo "unable to infer tagged configuration"
+ func_fatal_error "specify a tag with '--tag'"
+# else
+# func_verbose "using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+ write_libobj=$1
+ if test yes = "$build_libtool_libs"; then
+ write_lobj=\'$2\'
+ else
+ write_lobj=none
+ fi
+
+ if test yes = "$build_old_libs"; then
+ write_oldobj=\'$3\'
+ else
+ write_oldobj=none
+ fi
+
+ $opt_dry_run || {
+ cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+ $MV "${write_libobj}T" "$write_libobj"
+ }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+ $debug_cmd
+
+ func_convert_core_file_wine_to_w32_result=$1
+ if test -n "$1"; then
+ # Unfortunately, winepath does not exit with a non-zero error code, so we
+ # are forced to check the contents of stdout. On the other hand, if the
+ # command is not found, the shell will set an exit code of 127 and print
+ # *an error message* to stdout. So we must check for both error code of
+ # zero AND non-empty stdout, which explains the odd construction:
+ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+ if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp";
then
+ func_convert_core_file_wine_to_w32_result=`$ECHO
"$func_convert_core_file_wine_to_w32_tmp" |
+ $SED -e "$sed_naive_backslashify"`
+ else
+ func_convert_core_file_wine_to_w32_result=
+ fi
+ fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory
names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+ $debug_cmd
+
+ # unfortunately, winepath doesn't convert paths, only file names
+ func_convert_core_path_wine_to_w32_result=
+ if test -n "$1"; then
+ oldIFS=$IFS
+ IFS=:
+ for func_convert_core_path_wine_to_w32_f in $1; do
+ IFS=$oldIFS
+ func_convert_core_file_wine_to_w32
"$func_convert_core_path_wine_to_w32_f"
+ if test -n "$func_convert_core_file_wine_to_w32_result"; then
+ if test -z "$func_convert_core_path_wine_to_w32_result"; then
+
func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
+ else
+ func_append func_convert_core_path_wine_to_w32_result
";$func_convert_core_file_wine_to_w32_result"
+ fi
+ fi
+ done
+ IFS=$oldIFS
+ fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+ $debug_cmd
+
+ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+ if test "$?" -ne 0; then
+ # on failure, ensure result is empty
+ func_cygpath_result=
+ fi
+ else
+ func_cygpath_result=
+ func_error "LT_CYGPATH is empty or specifies non-existent file:
'$LT_CYGPATH'"
+ fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format. Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+ $debug_cmd
+
+ # awkward: cmd appends spaces to result
+ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+ $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+ $debug_cmd
+
+ if test -z "$2" && test -n "$1"; then
+ func_error "Could not determine host file name corresponding to"
+ func_error " '$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback:
+ func_to_host_file_result=$1
+ fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+ $debug_cmd
+
+ if test -z "$4" && test -n "$3"; then
+ func_error "Could not determine the host path corresponding to"
+ func_error " '$3'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback. This is a deliberately simplistic "conversion" and
+ # should not be "improved". See libtool.info.
+ if test "x$1" != "x$2"; then
+ lt_replace_pathsep_chars="s|$1|$2|g"
+ func_to_host_path_result=`echo "$3" |
+ $SED -e "$lt_replace_pathsep_chars"`
+ else
+ func_to_host_path_result=$3
+ fi
+ fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+ $debug_cmd
+
+ case $4 in
+ $1 ) func_to_host_path_result=$3$func_to_host_path_result
+ ;;
+ esac
+ case $4 in
+ $2 ) func_append func_to_host_path_result "$3"
+ ;;
+ esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via '$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+ $debug_cmd
+
+ $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result. If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+ $debug_cmd
+
+ case ,$2, in
+ *,"$to_tool_file_cmd",*)
+ func_to_tool_file_result=$1
+ ;;
+ *)
+ $to_tool_file_cmd "$1"
+ func_to_tool_file_result=$func_to_host_file_result
+ ;;
+ esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+ func_to_host_file_result=$1
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+ $debug_cmd
+
+ func_to_host_file_result=$1
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_to_host_file_result=$func_convert_core_msys_to_w32_result
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+ $debug_cmd
+
+ func_to_host_file_result=$1
+ if test -n "$1"; then
+ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+ # LT_CYGPATH in this case.
+ func_to_host_file_result=`cygpath -m "$1"`
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format. Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+ $debug_cmd
+
+ func_to_host_file_result=$1
+ if test -n "$1"; then
+ func_convert_core_file_wine_to_w32 "$1"
+ func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+ $debug_cmd
+
+ func_to_host_file_result=$1
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_msys_to_w32_result"
+ func_to_host_file_result=$func_cygpath_result
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+ $debug_cmd
+
+ func_to_host_file_result=$1
+ if test -n "$1"; then
+ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+ func_convert_core_file_wine_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+ func_to_host_file_result=$func_cygpath_result
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via '$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format. If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+# file name conversion function : func_convert_file_X_to_Y ()
+# path conversion function : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same. If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+ $debug_cmd
+
+ if test -z "$to_host_path_cmd"; then
+ func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+ to_host_path_cmd=func_convert_path_$func_stripname_result
+ fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+ $debug_cmd
+
+ func_init_to_host_path_cmd
+ $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+ func_to_host_path_result=$1
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+ $debug_cmd
+
+ func_to_host_path_result=$1
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from ARG. MSYS
+ # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+ # and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result=$func_convert_core_msys_to_w32_result
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+ $debug_cmd
+
+ func_to_host_path_result=$1
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format. Requires a wine environment and
+# a working winepath. Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+ $debug_cmd
+
+ func_to_host_path_result=$1
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+ $debug_cmd
+
+ func_to_host_path_result=$1
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+ func_to_host_path_result=$func_cygpath_result
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+ $debug_cmd
+
+ func_to_host_path_result=$1
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from
+ # ARG. msys behavior is inconsistent here, cygpath turns them
+ # into '.;' and ';.', and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+ func_to_host_path_result=$func_cygpath_result
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_dll_def_p FILE
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with _LT_DLL_DEF_P in libtool.m4
+func_dll_def_p ()
+{
+ $debug_cmd
+
+ func_dll_def_p_tmp=`$SED -n \
+ -e 's/^[ ]*//' \
+ -e '/^\(;.*\)*$/d' \
+ -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \
+ -e q \
+ "$1"`
+ test DEF = "$func_dll_def_p_tmp"
+}
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+ $debug_cmd
+
+ # Get the compilation command and the source file.
+ base_compile=
+ srcfile=$nonopt # always keep a non-empty value in "srcfile"
+ suppress_opt=yes
+ suppress_output=
+ arg_mode=normal
+ libobj=
+ later=
+ pie_flag=
+
+ for arg
+ do
+ case $arg_mode in
+ arg )
+ # do not "continue". Instead, add this to base_compile
+ lastarg=$arg
+ arg_mode=normal
+ ;;
+
+ target )
+ libobj=$arg
+ arg_mode=normal
+ continue
+ ;;
+
+ normal )
+ # Accept any command-line options.
+ case $arg in
+ -o)
+ test -n "$libobj" && \
+ func_fatal_error "you cannot specify '-o' more than once"
+ arg_mode=target
+ continue
+ ;;
+
+ -pie | -fpie | -fPIE)
+ func_append pie_flag " $arg"
+ continue
+ ;;
+
+ -shared | -static | -prefer-pic | -prefer-non-pic)
+ func_append later " $arg"
+ continue
+ ;;
+
+ -no-suppress)
+ suppress_opt=no
+ continue
+ ;;
+
+ -Xcompiler)
+ arg_mode=arg # the next one goes into the "base_compile" arg list
+ continue # The current "srcfile" will either be retained or
+ ;; # replaced later. I would guess that would be a bug.
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ lastarg=
+ save_ifs=$IFS; IFS=,
+ for arg in $args; do
+ IFS=$save_ifs
+ func_append_quoted lastarg "$arg"
+ done
+ IFS=$save_ifs
+ func_stripname ' ' '' "$lastarg"
+ lastarg=$func_stripname_result
+
+ # Add the arguments to base_compile.
+ func_append base_compile " $lastarg"
+ continue
+ ;;
+
+ *)
+ # Accept the current argument as the source file.
+ # The previous "srcfile" becomes the current argument.
+ #
+ lastarg=$srcfile
+ srcfile=$arg
+ ;;
+ esac # case $arg
+ ;;
+ esac # case $arg_mode
+
+ # Aesthetically quote the previous argument.
+ func_append_quoted base_compile "$lastarg"
+ done # for arg
+
+ case $arg_mode in
+ arg)
+ func_fatal_error "you must specify an argument for -Xcompile"
+ ;;
+ target)
+ func_fatal_error "you must specify a target with '-o'"
+ ;;
+ *)
+ # Get the name of the library object.
+ test -z "$libobj" && {
+ func_basename "$srcfile"
+ libobj=$func_basename_result
+ }
+ ;;
+ esac
+
+ # Recognize several different file suffixes.
+ # If the user specifies -o file.o, it is replaced with file.lo
+ case $libobj in
+ *.[cCFSifmso] | \
+ *.ada | *.adb | *.ads | *.asm | \
+ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+ func_xform "$libobj"
+ libobj=$func_xform_result
+ ;;
+ esac
+
+ case $libobj in
+ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+ *)
+ func_fatal_error "cannot determine name of library object from '$libobj'"
+ ;;
+ esac
+
+ func_infer_tag $base_compile
+
+ for arg in $later; do
+ case $arg in
+ -shared)
+ test yes = "$build_libtool_libs" \
+ || func_fatal_configuration "cannot build a shared library"
+ build_old_libs=no
+ continue
+ ;;
+
+ -static)
+ build_libtool_libs=no
+ build_old_libs=yes
+ continue
+ ;;
+
+ -prefer-pic)
+ pic_mode=yes
+ continue
+ ;;
+
+ -prefer-non-pic)
+ pic_mode=no
+ continue
+ ;;
+ esac
+ done
+
+ func_quote_arg pretty "$libobj"
+ test "X$libobj" != "X$func_quote_arg_result" \
+ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && func_warning "libobj name '$libobj' may not contain shell special
characters."
+ func_dirname_and_basename "$obj" "/" ""
+ objname=$func_basename_result
+ xdir=$func_dirname_result
+ lobj=$xdir$objdir/$objname
+
+ test -z "$base_compile" && \
+ func_fatal_help "you must specify a compilation command"
+
+ # Delete any leftover library objects.
+ if test yes = "$build_old_libs"; then
+ removelist="$obj $lobj $libobj ${libobj}T"
+ else
+ removelist="$lobj $libobj ${libobj}T"
+ fi
+
+ # On Cygwin there's no "real" PIC flag so we must build both object types
+ case $host_os in
+ cygwin* | mingw* | pw32* | os2* | cegcc*)
+ pic_mode=default
+ ;;
+ esac
+ if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
+ # non-PIC code in shared libraries is not supported
+ pic_mode=default
+ fi
+
+ # Calculate the filename of the output object if compiler does
+ # not support -o with -c
+ if test no = "$compiler_c_o"; then
+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
+ lockfile=$output_obj.lock
+ else
+ output_obj=
+ need_locks=no
+ lockfile=
+ fi
+
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test yes = "$need_locks"; then
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ elif test warn = "$need_locks"; then
+ if test -f "$lockfile"; then
+ $ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+ func_append removelist " $output_obj"
+ $ECHO "$srcfile" > "$lockfile"
+ fi
+
+ $opt_dry_run || $RM $removelist
+ func_append removelist " $lockfile"
+ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+ srcfile=$func_to_tool_file_result
+ func_quote_arg pretty "$srcfile"
+ qsrcfile=$func_quote_arg_result
+
+ # Only build a PIC object if we are building libtool libraries.
+ if test yes = "$build_libtool_libs"; then
+ # Without this assignment, base_compile gets emptied.
+ fbsd_hideous_sh_bug=$base_compile
+
+ if test no != "$pic_mode"; then
+ command="$base_compile $qsrcfile $pic_flag"
+ else
+ # Don't build PIC code
+ command="$base_compile $qsrcfile"
+ fi
+
+ func_mkdir_p "$xdir$objdir"
+
+ if test -z "$output_obj"; then
+ # Place PIC objects in $objdir
+ func_append command " -o $lobj"
+ fi
+
+ func_show_eval_locale "$command" \
+ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+ if test warn = "$need_locks" &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed, then go on to compile the next one
+ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+ func_show_eval '$MV "$output_obj" "$lobj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+
+ # Allow error messages only from the first compilation.
+ if test yes = "$suppress_opt"; then
+ suppress_output=' >/dev/null 2>&1'
+ fi
+ fi
+
+ # Only build a position-dependent object if we build old libraries.
+ if test yes = "$build_old_libs"; then
+ if test yes != "$pic_mode"; then
+ # Don't build PIC code
+ command="$base_compile $qsrcfile$pie_flag"
+ else
+ command="$base_compile $qsrcfile $pic_flag"
+ fi
+ if test yes = "$compiler_c_o"; then
+ func_append command " -o $obj"
+ fi
+
+ # Suppress compiler output if we already did a PIC compilation.
+ func_append command "$suppress_output"
+ func_show_eval_locale "$command" \
+ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+ if test warn = "$need_locks" &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed
+ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+ func_show_eval '$MV "$output_obj" "$obj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+ fi
+
+ $opt_dry_run || {
+ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+ # Unlock the critical section if it was locked
+ if test no != "$need_locks"; then
+ removelist=$lockfile
+ $RM "$lockfile"
+ fi
+ }
+
+ exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+ test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+ # We need to display help for each of the modes.
+ case $opt_mode in
+ "")
+ # Generic help is extracted from the usage comments
+ # at the start of this file.
+ func_help
+ ;;
+
+ clean)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ compile)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -no-suppress do not suppress compiler output for multiple passes
+ -prefer-pic try to build PIC objects only
+ -prefer-non-pic try to build non-PIC objects only
+ -shared do not build a '.o' file suitable for static linking
+ -static only build a '.o' file suitable for static linking
+ -Wc,FLAG
+ -Xcompiler FLAG pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a 'standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix '.c' with the
+library object suffix, '.lo'."
+ ;;
+
+ execute)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+ -dlopen FILE add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to '-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+ ;;
+
+ finish)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges. Use
+the '--dry-run' option if you just want to see what would be executed."
+ ;;
+
+ install)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command. The first component should be
+either the 'install' or 'cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+ -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for
installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+ ;;
+
+ link)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+ -all-static do not do any dynamic linking at all
+ -avoid-version do not add a version suffix if possible
+ -bindir BINDIR specify path to binaries directory (for systems where
+ libraries must be found in the PATH setting at runtime)
+ -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+ -export-symbols SYMFILE
+ try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+ try to export only the symbols matching REGEX
+ -LLIBDIR search LIBDIR for required installed libraries
+ -lNAME OUTPUT-FILE requires the installed library libNAME
+ -module build a library that can dlopened
+ -no-fast-install disable the fast-install mode
+ -no-install link a not-installable executable
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -objectlist FILE use a list of object files found in FILE to specify objects
+ -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes)
+ -precious-files-regex REGEX
+ don't remove output files matching REGEX
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+ -shared only do dynamic linking of libtool libraries
+ -shrext SUFFIX override the standard shared library file extension
+ -static do not do any dynamic linking of uninstalled libtool
libraries
+ -static-libtool-libs
+ do not do any dynamic linking of libtool libraries
+ -version-info CURRENT[:REVISION[:AGE]]
+ specify library version info [each variable defaults to 0]
+ -weak LIBNAME declare that the target provides the LIBNAME interface
+ -Wc,FLAG
+ -Xcompiler FLAG pass linker-specific FLAG directly to the compiler
+ -Wa,FLAG
+ -Xassembler FLAG pass linker-specific FLAG directly to the assembler
+ -Wl,FLAG
+ -Xlinker FLAG pass linker-specific FLAG directly to the linker
+ -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with '-') are ignored.
+
+Every other argument is treated as a filename. Files ending in '.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in '.la', then a libtool library is created,
+only library objects ('.lo' files) may be specified, and '-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
+using 'ar' and 'ranlib', or on Windows using 'lib'.
+
+If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
+is created, otherwise an executable program is created."
+ ;;
+
+ uninstall)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ *)
+ func_fatal_help "invalid operation mode '$opt_mode'"
+ ;;
+ esac
+
+ echo
+ $ECHO "Try '$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+ if test : = "$opt_help"; then
+ func_mode_help
+ else
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ func_mode_help
+ done
+ } | $SED -n '1p; 2,$s/^Usage:/ or: /p'
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ echo
+ func_mode_help
+ done
+ } |
+ $SED '1d
+ /^When reporting/,/^Report/{
+ H
+ d
+ }
+ $x
+ /information about other modes/d
+ /more detailed .*MODE/d
+ s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+ fi
+ exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+ $debug_cmd
+
+ # The first argument is the command name.
+ cmd=$nonopt
+ test -z "$cmd" && \
+ func_fatal_help "you must specify a COMMAND"
+
+ # Handle -dlopen flags immediately.
+ for file in $opt_dlopen; do
+ test -f "$file" \
+ || func_fatal_help "'$file' is not a file"
+
+ dir=
+ case $file in
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "'$lib' is not a valid libtool archive"
+
+ # Read the libtool library.
+ dlname=
+ library_names=
+ func_source "$file"
+
+ # Skip this library if it cannot be dlopened.
+ if test -z "$dlname"; then
+ # Warn if it was a shared library.
+ test -n "$library_names" && \
+ func_warning "'$file' was not linked with '-export-dynamic'"
+ continue
+ fi
+
+ func_dirname "$file" "" "."
+ dir=$func_dirname_result
+
+ if test -f "$dir/$objdir/$dlname"; then
+ func_append dir "/$objdir"
+ else
+ if test ! -f "$dir/$dlname"; then
+ func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
+ fi
+ fi
+ ;;
+
+ *.lo)
+ # Just add the directory containing the .lo file.
+ func_dirname "$file" "" "."
+ dir=$func_dirname_result
+ ;;
+
+ *)
+ func_warning "'-dlopen' is ignored for non-libtool libraries and
objects"
+ continue
+ ;;
+ esac
+
+ # Get the absolute pathname.
+ absdir=`cd "$dir" && pwd`
+ test -n "$absdir" && dir=$absdir
+
+ # Now add the directory to shlibpath_var.
+ if eval "test -z \"\$$shlibpath_var\""; then
+ eval "$shlibpath_var=\"\$dir\""
+ else
+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+ fi
+ done
+
+ # This variable tells wrapper scripts just to set shlibpath_var
+ # rather than running their programs.
+ libtool_execute_magic=$magic
+
+ # Check if any of the arguments is a wrapper script.
+ args=
+ for file
+ do
+ case $file in
+ -* | *.la | *.lo ) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+ if func_ltwrapper_script_p "$file"; then
+ func_source "$file"
+ # Transform arg to wrapped name.
+ file=$progdir/$program
+ elif func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ func_source "$func_ltwrapper_scriptname_result"
+ # Transform arg to wrapped name.
+ file=$progdir/$program
+ fi
+ ;;
+ esac
+ # Quote arguments (to preserve shell metacharacters).
+ func_append_quoted args "$file"
+ done
+
+ if $opt_dry_run; then
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ echo "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ else
+ if test -n "$shlibpath_var"; then
+ # Export the shlibpath_var.
+ eval "export $shlibpath_var"
+ fi
+
+ # Restore saved environment variables
+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+ do
+ eval "if test \"\${save_$lt_var+set}\" = set; then
+ $lt_var=\$save_$lt_var; export $lt_var
+ else
+ $lt_unset $lt_var
+ fi"
+ done
+
+ # Now prepare to actually exec the command.
+ exec_cmd=\$cmd$args
+ fi
+}
+
+test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+ $debug_cmd
+
+ libs=
+ libdirs=
+ admincmds=
+
+ for opt in "$nonopt" ${1+"$@"}
+ do
+ if test -d "$opt"; then
+ func_append libdirs " $opt"
+
+ elif test -f "$opt"; then
+ if func_lalib_unsafe_p "$opt"; then
+ func_append libs " $opt"
+ else
+ func_warning "'$opt' is not a valid libtool archive"
+ fi
+
+ else
+ func_fatal_error "invalid argument '$opt'"
+ fi
+ done
+
+ if test -n "$libs"; then
+ if test -n "$lt_sysroot"; then
+ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+ sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+ else
+ sysroot_cmd=
+ fi
+
+ # Remove sysroot references
+ if $opt_dry_run; then
+ for lib in $libs; do
+ echo "removing references to $lt_sysroot and '=' prefixes from $lib"
+ done
+ else
+ tmpdir=`func_mktempdir`
+ for lib in $libs; do
+ $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+ > $tmpdir/tmp-la
+ mv -f $tmpdir/tmp-la $lib
+ done
+ ${RM}r "$tmpdir"
+ fi
+ fi
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+ fi
+ if test -n "$finish_eval"; then
+ # Do the single finish_eval.
+ eval cmds=\"$finish_eval\"
+ $opt_dry_run || eval "$cmds" || func_append admincmds "
+ $cmds"
+ fi
+ done
+ fi
+
+ # Exit here if they wanted silent mode.
+ $opt_quiet && exit $EXIT_SUCCESS
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ echo
"----------------------------------------------------------------------"
+ echo "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ $ECHO " $libdir"
+ done
+ echo
+ echo "If you ever happen to want to link against installed libraries"
+ echo "in a given directory, LIBDIR, you must either use libtool, and"
+ echo "specify the full pathname of the library, or use the '-LLIBDIR'"
+ echo "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ echo " - add LIBDIR to the '$shlibpath_var' environment variable"
+ echo " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ echo " - add LIBDIR to the '$runpath_var' environment variable"
+ echo " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+ $ECHO " - use the '$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+ $ECHO " - have your system administrator run these
commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ echo " - have your system administrator add LIBDIR to
'/etc/ld.so.conf'"
+ fi
+ echo
+
+ echo "See any operating system documentation about shared libraries for"
+ case $host in
+ solaris2.[6789]|solaris2.1[0-9])
+ echo "more information, such as the ld(1), crle(1) and ld.so(8)
manual"
+ echo "pages."
+ ;;
+ *)
+ echo "more information, such as the ld(1) and ld.so(8) manual pages."
+ ;;
+ esac
+ echo
"----------------------------------------------------------------------"
+ fi
+ exit $EXIT_SUCCESS
+}
+
+test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+ $debug_cmd
+
+ # There may be an optional sh(1) argument at the beginning of
+ # install_prog (especially on Windows NT).
+ if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
+ # Allow the use of GNU shtool's install command.
+ case $nonopt in *shtool*) :;; *) false;; esac
+ then
+ # Aesthetically quote it.
+ func_quote_arg pretty "$nonopt"
+ install_prog="$func_quote_arg_result "
+ arg=$1
+ shift
+ else
+ install_prog=
+ arg=$nonopt
+ fi
+
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ func_quote_arg pretty "$arg"
+ func_append install_prog "$func_quote_arg_result"
+ install_shared_prog=$install_prog
+ case " $install_prog " in
+ *[\\\ /]cp\ *) install_cp=: ;;
+ *) install_cp=false ;;
+ esac
+
+ # We need to accept at least all the BSD install flags.
+ dest=
+ files=
+ opts=
+ prev=
+ install_type=
+ isdir=false
+ stripme=
+ no_mode=:
+ for arg
+ do
+ arg2=
+ if test -n "$dest"; then
+ func_append files " $dest"
+ dest=$arg
+ continue
+ fi
+
+ case $arg in
+ -d) isdir=: ;;
+ -f)
+ if $install_cp; then :; else
+ prev=$arg
+ fi
+ ;;
+ -g | -m | -o)
+ prev=$arg
+ ;;
+ -s)
+ stripme=" -s"
+ continue
+ ;;
+ -*)
+ ;;
+ *)
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ if test X-m = "X$prev" && test -n "$install_override_mode"; then
+ arg2=$install_override_mode
+ no_mode=false
+ fi
+ prev=
+ else
+ dest=$arg
+ continue
+ fi
+ ;;
+ esac
+
+ # Aesthetically quote the argument.
+ func_quote_arg pretty "$arg"
+ func_append install_prog " $func_quote_arg_result"
+ if test -n "$arg2"; then
+ func_quote_arg pretty "$arg2"
+ fi
+ func_append install_shared_prog " $func_quote_arg_result"
+ done
+
+ test -z "$install_prog" && \
+ func_fatal_help "you must specify an install program"
+
+ test -n "$prev" && \
+ func_fatal_help "the '$prev' option requires an argument"
+
+ if test -n "$install_override_mode" && $no_mode; then
+ if $install_cp; then :; else
+ func_quote_arg pretty "$install_override_mode"
+ func_append install_shared_prog " -m $func_quote_arg_result"
+ fi
+ fi
+
+ if test -z "$files"; then
+ if test -z "$dest"; then
+ func_fatal_help "no file or destination specified"
+ else
+ func_fatal_help "you must specify a destination"
+ fi
+ fi
+
+ # Strip any trailing slash from the destination.
+ func_stripname '' '/' "$dest"
+ dest=$func_stripname_result
+
+ # Check to see that the destination is a directory.
+ test -d "$dest" && isdir=:
+ if $isdir; then
+ destdir=$dest
+ destname=
+ else
+ func_dirname_and_basename "$dest" "" "."
+ destdir=$func_dirname_result
+ destname=$func_basename_result
+
+ # Not a directory, so check to see that there is only one file specified.
+ set dummy $files; shift
+ test "$#" -gt 1 && \
+ func_fatal_help "'$dest' is not a directory"
+ fi
+ case $destdir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ for file in $files; do
+ case $file in
+ *.lo) ;;
+ *)
+ func_fatal_help "'$destdir' must be an absolute directory name"
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic=$magic
+
+ staticlibs=
+ future_libdirs=
+ current_libdirs=
+ for file in $files; do
+
+ # Do each installation.
+ case $file in
+ *.$libext)
+ # Do the static libraries later.
+ func_append staticlibs " $file"
+ ;;
+
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "'$file' is not a valid libtool archive"
+
+ library_names=
+ old_library=
+ relink_command=
+ func_source "$file"
+
+ # Add the libdir to current_libdirs if it is the destination.
+ if test "X$destdir" = "X$libdir"; then
+ case "$current_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append current_libdirs " $libdir" ;;
+ esac
+ else
+ # Note the libdir as a future libdir.
+ case "$future_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append future_libdirs " $libdir" ;;
+ esac
+ fi
+
+ func_dirname "$file" "/" ""
+ dir=$func_dirname_result
+ func_append dir "$objdir"
+
+ if test -n "$relink_command"; then
+ # Determine the prefix the user has applied to our future dir.
+ inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
+ # are installed to the same prefix.
+ # At present, this check doesn't affect windows .dll's that
+ # are installed into $libdir/../bin (currently, that works fine)
+ # but it's something to keep an eye on.
+ test "$inst_prefix_dir" = "$destdir" && \
+ func_fatal_error "error: cannot install '$file' to a directory not
ending in $libdir"
+
+ if test -n "$inst_prefix_dir"; then
+ # Stick the inst_prefix_dir data into the link command.
+ relink_command=`$ECHO "$relink_command" | $SED
"s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ else
+ relink_command=`$ECHO "$relink_command" | $SED
"s%@inst_prefix_dir@%%"`
+ fi
+
+ func_warning "relinking '$file'"
+ func_show_eval "$relink_command" \
+ 'func_fatal_error "error: relink '\''$file'\'' with the above
command before installing it"'
+ fi
+
+ # See the names of the shared library.
+ set dummy $library_names; shift
+ if test -n "$1"; then
+ realname=$1
+ shift
+
+ srcname=$realname
+ test -n "$relink_command" && srcname=${realname}T
+
+ # Install the shared library and build the symlinks.
+ func_show_eval "$install_shared_prog $dir/$srcname
$destdir/$realname" \
+ 'exit $?'
+ tstripme=$stripme
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $realname in
+ *.dll.a)
+ tstripme=
+ ;;
+ esac
+ ;;
+ os2*)
+ case $realname in
+ *_dll.a)
+ tstripme=
+ ;;
+ esac
+ ;;
+ esac
+ if test -n "$tstripme" && test -n "$striplib"; then
+ func_show_eval "$striplib $destdir/$realname" 'exit $?'
+ fi
+
+ if test "$#" -gt 0; then
+ # Delete the old symlinks, and create new ones.
+ # Try 'ln -sf' first, because the 'ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
+ for linkname
+ do
+ test "$linkname" != "$realname" \
+ && func_show_eval "(cd $destdir && { $LN_S -f $realname
$linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+ done
+ fi
+
+ # Do each command in the postinstall commands.
+ lib=$destdir/$realname
+ func_execute_cmds "$postinstall_cmds" 'exit $?'
+ fi
+
+ # Install the pseudo-library for information purposes.
+ func_basename "$file"
+ name=$func_basename_result
+ instname=$dir/${name}i
+ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+ # Maybe install the static library, too.
+ test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+ ;;
+
+ *.lo)
+ # Install (i.e. copy) a libtool object.
+
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile=$destdir/$destname
+ else
+ func_basename "$file"
+ destfile=$func_basename_result
+ destfile=$destdir/$destfile
+ fi
+
+ # Deduce the name of the destination old-style object file.
+ case $destfile in
+ *.lo)
+ func_lo2o "$destfile"
+ staticdest=$func_lo2o_result
+ ;;
+ *.$objext)
+ staticdest=$destfile
+ destfile=
+ ;;
+ *)
+ func_fatal_help "cannot copy a libtool object to '$destfile'"
+ ;;
+ esac
+
+ # Install the libtool object if requested.
+ test -n "$destfile" && \
+ func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+ # Install the old object if enabled.
+ if test yes = "$build_old_libs"; then
+ # Deduce the name of the old-style object file.
+ func_lo2o "$file"
+ staticobj=$func_lo2o_result
+ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+ fi
+ exit $EXIT_SUCCESS
+ ;;
+
+ *)
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile=$destdir/$destname
+ else
+ func_basename "$file"
+ destfile=$func_basename_result
+ destfile=$destdir/$destfile
+ fi
+
+ # If the file is missing, and there is a .exe on the end, strip it
+ # because it is most likely a libtool script we actually want to
+ # install
+ stripped_ext=
+ case $file in
+ *.exe)
+ if test ! -f "$file"; then
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ stripped_ext=.exe
+ fi
+ ;;
+ esac
+
+ # Do a test to see if this is really a libtool program.
+ case $host in
+ *cygwin* | *mingw*)
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ wrapper=$func_ltwrapper_scriptname_result
+ else
+ func_stripname '' '.exe' "$file"
+ wrapper=$func_stripname_result
+ fi
+ ;;
+ *)
+ wrapper=$file
+ ;;
+ esac
+ if func_ltwrapper_script_p "$wrapper"; then
+ notinst_deplibs=
+ relink_command=
+
+ func_source "$wrapper"
+
+ # Check the variables that should have been set.
+ test -z "$generated_by_libtool_version" && \
+ func_fatal_error "invalid libtool wrapper script '$wrapper'"
+
+ finalize=:
+ for lib in $notinst_deplibs; do
+ # Check to see that each library is installed.
+ libdir=
+ if test -f "$lib"; then
+ func_source "$lib"
+ fi
+ libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
+ if test -n "$libdir" && test ! -f "$libfile"; then
+ func_warning "'$lib' has not been installed in '$libdir'"
+ finalize=false
+ fi
+ done
+
+ relink_command=
+ func_source "$wrapper"
+
+ outputname=
+ if test no = "$fast_install" && test -n "$relink_command"; then
+ $opt_dry_run || {
+ if $finalize; then
+ tmpdir=`func_mktempdir`
+ func_basename "$file$stripped_ext"
+ file=$func_basename_result
+ outputname=$tmpdir/$file
+ # Replace the output file specification.
+ relink_command=`$ECHO "$relink_command" | $SED
's%@OUTPUT@%'"$outputname"'%g'`
+
+ $opt_quiet || {
+ func_quote_arg expand,pretty "$relink_command"
+ eval "func_echo $func_quote_arg_result"
+ }
+ if eval "$relink_command"; then :
+ else
+ func_error "error: relink '$file' with the above command
before installing it"
+ $opt_dry_run || ${RM}r "$tmpdir"
+ continue
+ fi
+ file=$outputname
+ else
+ func_warning "cannot relink '$file'"
+ fi
+ }
+ else
+ # Install the binary that we compiled earlier.
+ file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+ fi
+ fi
+
+ # remove .exe since cygwin /usr/bin/install will append another
+ # one anyway
+ case $install_prog,$host in
+ */usr/bin/install*,*cygwin*)
+ case $file:$destfile in
+ *.exe:*.exe)
+ # this is ok
+ ;;
+ *.exe:*)
+ destfile=$destfile.exe
+ ;;
+ *:*.exe)
+ func_stripname '' '.exe' "$destfile"
+ destfile=$func_stripname_result
+ ;;
+ esac
+ ;;
+ esac
+ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+ $opt_dry_run || if test -n "$outputname"; then
+ ${RM}r "$tmpdir"
+ fi
+ ;;
+ esac
+ done
+
+ for file in $staticlibs; do
+ func_basename "$file"
+ name=$func_basename_result
+
+ # Set up the ranlib parameters.
+ oldlib=$destdir/$name
+ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+ tool_oldlib=$func_to_tool_file_result
+
+ func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+ if test -n "$stripme" && test -n "$old_striplib"; then
+ func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+ fi
+
+ # Do each command in the postinstall commands.
+ func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+ done
+
+ test -n "$future_libdirs" && \
+ func_warning "remember to run '$progname --finish$future_libdirs'"
+
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ $opt_dry_run && current_libdirs=" -n$current_libdirs"
+ exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
+ else
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test install = "$opt_mode" && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+ $debug_cmd
+
+ my_outputname=$1
+ my_originator=$2
+ my_pic_p=${3-false}
+ my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
+ my_dlsyms=
+
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
+ my_dlsyms=${my_outputname}S.c
+ else
+ func_error "not configured to extract global symbols from dlpreopened
files"
+ fi
+ fi
+
+ if test -n "$my_dlsyms"; then
+ case $my_dlsyms in
+ "") ;;
+ *.c)
+ # Discover the nlist of each of the dlfiles.
+ nlist=$output_objdir/$my_outputname.nm
+
+ func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+ # Parse the name list into a source file.
+ func_verbose "creating $output_objdir/$my_dlsyms"
+
+ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation.
*/
+/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) ||
(__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.
*/
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined __osf__
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
+/* External symbol declarations for the compiler. */\
+"
+
+ if test yes = "$dlself"; then
+ func_verbose "generating symbol list for '$output'"
+
+ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+ # Add our own program objects to the symbol list.
+ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ for progfile in $progfiles; do
+ func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+ func_verbose "extracting global C symbols from
'$func_to_tool_file_result'"
+ $opt_dry_run || eval "$NM $func_to_tool_file_result |
$global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -n "$exclude_expsyms"; then
+ $opt_dry_run || {
+ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ if test -n "$export_symbols_regex"; then
+ $opt_dry_run || {
+ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ export_symbols=$output_objdir/$outputname.exp
+ $opt_dry_run || {
+ $RM $export_symbols
+ eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'<
"$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$export_symbols" >>
"$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ else
+ $opt_dry_run || {
+ eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"'
< "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" >
"$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ fi
+ fi
+
+ for dlprefile in $dlprefiles; do
+ func_verbose "extracting global C symbols from '$dlprefile'"
+ func_basename "$dlprefile"
+ name=$func_basename_result
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ # if an import library, we need to obtain dlname
+ if func_win32_import_lib_p "$dlprefile"; then
+ func_tr_sh "$dlprefile"
+ eval "curr_lafile=\$libfile_$func_tr_sh_result"
+ dlprefile_dlbasename=
+ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+ # Use subshell, to avoid clobbering current variable values
+ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+ if test -n "$dlprefile_dlname"; then
+ func_basename "$dlprefile_dlname"
+ dlprefile_dlbasename=$func_basename_result
+ else
+ # no lafile. user explicitly requested -dlpreopen <import
library>.
+ $sharedlib_from_linklib_cmd "$dlprefile"
+ dlprefile_dlbasename=$sharedlib_from_linklib_result
+ fi
+ fi
+ $opt_dry_run || {
+ if test -n "$dlprefile_dlbasename"; then
+ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+ else
+ func_warning "Could not compute DLL name from $name"
+ eval '$ECHO ": $name " >> "$nlist"'
+ fi
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null |
$global_symbol_pipe |
+ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >>
'$nlist'"
+ }
+ else # not an import lib
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null |
$global_symbol_pipe >> '$nlist'"
+ }
+ fi
+ ;;
+ *)
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null |
$global_symbol_pipe >> '$nlist'"
+ }
+ ;;
+ esac
+ done
+
+ $opt_dry_run || {
+ # Make sure we have at least an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ if test -n "$exclude_expsyms"; then
+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $MV "$nlist"T "$nlist"
+ fi
+
+ # Try sorting and uniquifying the output.
+ if $GREP -v "^: " < "$nlist" |
+ if sort -k 3 </dev/null >/dev/null 2>&1; then
+ sort -k 3
+ else
+ sort +2
+ fi |
+ uniq > "$nlist"S; then
+ :
+ else
+ $GREP -v "^: " < "$nlist" > "$nlist"S
+ fi
+
+ if test -f "$nlist"S; then
+ eval "$global_symbol_to_cdecl"' < "$nlist"S >>
"$output_objdir/$my_dlsyms"'
+ else
+ echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ fi
+
+ func_show_eval '$RM "${nlist}I"'
+ if test -n "$global_symbol_to_import"; then
+ eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
+ fi
+
+ echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols. */
+typedef struct {
+ const char *name;
+ void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];\
+"
+
+ if test -s "$nlist"I; then
+ echo >> "$output_objdir/$my_dlsyms" "\
+static void lt_syminit(void)
+{
+ LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
+ for (; symbol->name; ++symbol)
+ {"
+ $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address =
(void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
+ echo >> "$output_objdir/$my_dlsyms" "\
+ }
+}"
+ fi
+ echo >> "$output_objdir/$my_dlsyms" "\
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{ {\"$my_originator\", (void *) 0},"
+
+ if test -s "$nlist"I; then
+ echo >> "$output_objdir/$my_dlsyms" "\
+ {\"@INIT@\", (void *) <_syminit},"
+ fi
+
+ case $need_lib_prefix in
+ no)
+ eval "$global_symbol_to_c_name_address" < "$nlist" >>
"$output_objdir/$my_dlsyms"
+ ;;
+ *)
+ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >>
"$output_objdir/$my_dlsyms"
+ ;;
+ esac
+ echo >> "$output_objdir/$my_dlsyms" "\
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+ } # !$opt_dry_run
+
+ pic_flag_for_symtable=
+ case "$compile_command " in
+ *" -static "*) ;;
+ *)
+ case $host in
+ # compiling the symbol table file with pic_flag works around
+ # a FreeBSD bug that causes programs to crash when -lm is
+ # linked before any other PIC object. But we must not use
+ # pic_flag when linking with -static. The problem exists in
+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+ *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+ *-*-hpux*)
+ pic_flag_for_symtable=" $pic_flag" ;;
+ *)
+ $my_pic_p && pic_flag_for_symtable=" $pic_flag"
+ ;;
+ esac
+ ;;
+ esac
+ symtab_cflags=
+ for arg in $LTCFLAGS; do
+ case $arg in
+ -pie | -fpie | -fPIE) ;;
+ *) func_append symtab_cflags " $arg" ;;
+ esac
+ done
+
+ # Now compile the dynamic symbol file.
+ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags
-c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+ # Clean up the generated files.
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S"
"${nlist}T" "${nlist}I"'
+
+ # Transform the symbol file into the correct name.
+ symfileobj=$output_objdir/${my_outputname}S.$objext
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ if test -f "$output_objdir/$my_outputname.def"; then
+ compile_command=`$ECHO "$compile_command" | $SED
"s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED
"s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ else
+ compile_command=`$ECHO "$compile_command" | $SED
"s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED
"s%@SYMFILE@%$symfileobj%"`
+ fi
+ ;;
+ *)
+ compile_command=`$ECHO "$compile_command" | $SED
"s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED
"s%@SYMFILE@%$symfileobj%"`
+ ;;
+ esac
+ ;;
+ *)
+ func_fatal_error "unknown suffix for '$my_dlsyms'"
+ ;;
+ esac
+ else
+ # We keep going just in case the user didn't refer to
+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
+ # really was required.
+
+ # Nullify the symbol file.
+ compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+ fi
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+ $debug_cmd
+
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval
"$global_symbol_pipe" | $EGREP '
(_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+ test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+ $debug_cmd
+
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval
"$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+ test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+ $debug_cmd
+
+ win32_libid_type=unknown
+ win32_fileres=`file -L $1 2>/dev/null`
+ case $win32_fileres in
+ *ar\ archive\ import\ library*) # definitely import
+ win32_libid_type="x86 archive import"
+ ;;
+ *ar\ archive*) # could be an import, or static
+ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+ $EGREP 'file format (pei*-i386(.*architecture:
i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+ case $nm_interface in
+ "MS dumpbin")
+ if func_cygming_ms_implib_p "$1" ||
+ func_cygming_gnu_implib_p "$1"
+ then
+ win32_nmres=import
+ else
+ win32_nmres=
+ fi
+ ;;
+ *)
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ $SED -n -e '
+ 1,100{
+ / I /{
+ s|.*|import|
+ p
+ q
+ }
+ }'`
+ ;;
+ esac
+ case $win32_nmres in
+ import*) win32_libid_type="x86 archive import";;
+ *) win32_libid_type="x86 archive static";;
+ esac
+ fi
+ ;;
+ *DLL*)
+ win32_libid_type="x86 DLL"
+ ;;
+ *executable*) # but shell scripts are "executable" too...
+ case $win32_fileres in
+ *MS\ Windows\ PE\ Intel*)
+ win32_libid_type="x86 DLL"
+ ;;
+ esac
+ ;;
+ esac
+ $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+ $debug_cmd
+
+ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+ $debug_cmd
+
+ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+ $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+ $SED '/^Contents of section '"$match_literal"':/{
+ # Place marker at beginning of archive member dllname section
+ s/.*/====MARK====/
+ p
+ d
+ }
+ # These lines can sometimes be longer than 43 characters, but
+ # are always uninteresting
+ /:[ ]*file format pe[i]\{,1\}-/d
+ /^In archive [^:]*:/d
+ # Ensure marker is printed
+ /^====MARK====/p
+ # Remove all lines with less than 43 characters
+ /^.\{43\}/!d
+ # From remaining lines, remove first 43 characters
+ s/^.\{43\}//' |
+ $SED -n '
+ # Join marker and all lines until next marker into a single line
+ /^====MARK====/ b para
+ H
+ $ b para
+ b
+ :para
+ x
+ s/\n//g
+ # Remove the marker
+ s/^====MARK====//
+ # Remove trailing dots and whitespace
+ s/[\. \t]*$//
+ # Print
+ /./p' |
+ # we now have a list, one entry per line, of the stringified
+ # contents of the appropriate section of all members of the
+ # archive that possess that section. Heuristic: eliminate
+ # all those that have a first or second character that is
+ # a '.' (that is, objdump's representation of an unprintable
+ # character.) This should work for all archives with less than
+ # 0x302f exports -- but will fail for DLLs whose name actually
+ # begins with a literal '.' or a single character followed by
+ # a '.'.
+ #
+ # Of those that remain, print the first one.
+ $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+ $debug_cmd
+
+ if func_cygming_gnu_implib_p "$1"; then
+ # binutils import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core
'.idata$7' "$1"`
+ elif func_cygming_ms_implib_p "$1"; then
+ # ms-generated import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core
'.idata$6' "$1"`
+ else
+ # unknown
+ sharedlib_from_linklib_result=
+ fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ $debug_cmd
+
+ f_ex_an_ar_dir=$1; shift
+ f_ex_an_ar_oldlib=$1
+ if test yes = "$lock_old_archive_extraction"; then
+ lockfile=$f_ex_an_ar_oldlib.lock
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ fi
+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+ 'stat=$?; rm -f "$lockfile"; exit $stat'
+ if test yes = "$lock_old_archive_extraction"; then
+ $opt_dry_run || rm -f "$lockfile"
+ fi
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ func_fatal_error "object name conflicts in archive:
$f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+ fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ $debug_cmd
+
+ my_gentop=$1; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=
+ my_xlib=
+ my_xabs=
+ my_xdir=
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ func_basename "$my_xlib"
+ my_xlib=$func_basename_result
+ my_xlib_u=$my_xlib
+ while :; do
+ case " $extracted_archives " in
+ *" $my_xlib_u "*)
+ func_arith $extracted_serial + 1
+ extracted_serial=$func_arith_result
+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
+ *) break ;;
+ esac
+ done
+ extracted_archives="$extracted_archives $my_xlib_u"
+ my_xdir=$my_gentop/$my_xlib_u
+
+ func_mkdir_p "$my_xdir"
+
+ case $host in
+ *-darwin*)
+ func_verbose "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ $opt_dry_run || {
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ func_basename "$darwin_archive"
+ darwin_base_archive=$func_basename_result
+ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP
Architectures 2>/dev/null || true`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ func_verbose "$darwin_base_archive has multiple architectures
$darwin_arches"
+ for darwin_arch in $darwin_arches; do
+ func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
+ $LIPO -thin $darwin_arch -output
"unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
"$darwin_archive"
+ cd "unfat-$$/$darwin_base_archive-$darwin_arch"
+ func_extract_an_archive "`pwd`" "$darwin_base_archive"
+ cd "$darwin_curdir"
+ $RM
"unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
+ done # $darwin_arches
+ ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name
\*.lo -print | $SED -e "$sed_basename" | sort -u`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | sort |
$NL2SP`
+ $LIPO -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ $RM -rf unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd $darwin_orig_dir
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ } # !$opt_dry_run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name
\*.lo -print | sort | $NL2SP`
+ done
+
+ func_extract_archives_result=$my_oldobjs
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable. Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take. If 'yes', then the emitted script
+# will assume that the directory where it is stored is
+# the $objdir directory. This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+ func_emit_wrapper_arg1=${1-no}
+
+ $ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+ # install mode needs the following variables:
+ generated_by_libtool_version='$macro_version'
+ notinst_deplibs='$notinst_deplibs'
+else
+ # When we are sourced in execute mode, \$file and \$ECHO are already set.
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ file=\"\$0\""
+
+ func_quote_arg pretty "$ECHO"
+ qECHO=$func_quote_arg_result
+ $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+ ECHO=$qECHO
+ fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ that is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options that match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+ lt_script_arg0=\$0
+ shift
+ for lt_opt
+ do
+ case \"\$lt_opt\" in
+ --lt-debug) lt_option_debug=1 ;;
+ --lt-dump-script)
+ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e
's%/[^/]*$%%'\`
+ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e
's%^.*/%%'\`
+ cat \"\$lt_dump_D/\$lt_dump_F\"
+ exit 0
+ ;;
+ --lt-*)
+ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+
+ # Print the debug banner immediately:
+ if test -n \"\$lt_option_debug\"; then
+ echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE)
$VERSION\" 1>&2
+ fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+ lt_dump_args_N=1;
+ for lt_arg
+ do
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]:
\$lt_arg\"
+ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+ done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+ case $host in
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2* | *-cegcc*)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[0]:
\$progdir\\\\\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[0]:
\$progdir/\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $ECHO "\
+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+ exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+ case \" \$* \" in
+ *\\ --lt-*)
+ for lt_wr_arg
+ do
+ case \$lt_wr_arg in
+ --lt-*) ;;
+ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+ esac
+ shift
+ done ;;
+ esac
+ func_exec_program_core \${1+\"\$@\"}
+}
+
+ # Parse options
+ func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+ # Find the directory that this script lives in.
+ thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+ file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+ # If there was a directory component, then change thisdir.
+ if test \"x\$destdir\" != \"x\$file\"; then
+ case \"\$destdir\" in
+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+ *) thisdir=\"\$thisdir/\$destdir\" ;;
+ esac
+ fi
+
+ file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+ done
+
+ # Usually 'no', except on cygwin/mingw when embedded into
+ # the cwrapper.
+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+ # special case for '.'
+ if test \"\$thisdir\" = \".\"; then
+ thisdir=\`pwd\`
+ fi
+ # remove .libs from thisdir
+ case \"\$thisdir\" in
+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED
's%[\\\\/][^\\\\/]*$%%'\` ;;
+ $objdir ) thisdir=. ;;
+ esac
+ fi
+
+ # Try to get the absolute directory name.
+ absdir=\`cd \"\$thisdir\" && pwd\`
+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+ if test yes = "$fast_install"; then
+ $ECHO "\
+ program=lt-'$outputname'$exeext
+ progdir=\"\$thisdir/$objdir\"
+
+ if test ! -f \"\$progdir/\$program\" ||
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\"
2>/dev/null | $SED 1q\`; \\
+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+ file=\"\$\$-\$program\"
+
+ if test ! -d \"\$progdir\"; then
+ $MKDIR \"\$progdir\"
+ else
+ $RM \"\$progdir/\$file\"
+ fi"
+
+ $ECHO "\
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+ else
+ \$ECHO \"\$relink_command_output\" >&2
+ $RM \"\$progdir/\$file\"
+ exit 1
+ fi
+ fi
+
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+ { $RM \"\$progdir/\$program\";
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+ $RM \"\$progdir/\$file\"
+ fi"
+ else
+ $ECHO "\
+ program='$outputname'
+ progdir=\"\$thisdir/$objdir\"
+"
+ fi
+
+ $ECHO "\
+
+ if test -f \"\$progdir/\$program\"; then"
+
+ # fixup the dll searchpath if we need to.
+ #
+ # Fix the DLL searchpath if we need to. Do this before prepending
+ # to shlibpath, because on Windows, both are PATH and uninstalled
+ # libraries must come first.
+ if test -n "$dllsearchpath"; then
+ $ECHO "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
+ # Export our shlibpath_var if we have one.
+ if test yes = "$shlibpath_overrides_runpath" && test -n
"$shlibpath_var" && test -n "$temp_rpath"; then
+ $ECHO "\
+ # Add our own library path to $shlibpath_var
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+ # The second colon is a workaround for a bug in BeOS R4 sed
+ $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+ export $shlibpath_var
+"
+ fi
+
+ $ECHO "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
+ func_exec_program \${1+\"\$@\"}
+ fi
+ else
+ # The program doesn't exist.
+ \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+ \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+ exit 1
+ fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+ cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+ Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+
+ The $output program cannot be directly executed until all the libtool
+ libraries that it depends on are installed.
+
+ This wrapper executable should never be moved out of the build directory.
+ If it is, it will not operate correctly.
+*/
+EOF
+ cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+# include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
+/* declarations of non-ANSI functions */
+#if defined __MINGW32__
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined __CYGWIN__
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined other_platform || defined ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined _MSC_VER
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+# define S_IXUSR _S_IEXEC
+#elif defined __MINGW32__
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+#elif defined __CYGWIN__
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined other platforms ... */
+#endif
+
+#if defined PATH_MAX
+# define LT_PATHMAX PATH_MAX
+#elif defined MAXPATHLEN
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
+ defined __OS2__
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+# define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+# define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+ if (stale) { free (stale); stale = 0; } \
+} while (0)
+
+#if defined LT_DEBUGWRAPPER
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+ cat <<EOF
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+# define externally_visible volatile
+#else
+# define externally_visible __attribute__((externally_visible)) volatile
+#endif
+externally_visible const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+ if test yes = "$shlibpath_overrides_runpath" && test -n
"$shlibpath_var" && test -n "$temp_rpath"; then
+ func_to_host_path "$temp_rpath"
+ cat <<EOF
+const char * LIB_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * LIB_PATH_VALUE = "";
+EOF
+ fi
+
+ if test -n "$dllsearchpath"; then
+ func_to_host_path "$dllsearchpath:"
+ cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE = "";
+EOF
+ fi
+
+ if test yes = "$fast_install"; then
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+ else
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+ fi
+
+
+ cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX
"dump-script";
+static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+ char **newargz;
+ int newargc;
+ char *tmp_pathspec;
+ char *actual_cwrapper_path;
+ char *actual_cwrapper_name;
+ char *target_name;
+ char *lt_argv_zero;
+ int rval = 127;
+
+ int i;
+
+ program_name = (char *) xstrdup (base_name (argv[0]));
+ newargz = XMALLOC (char *, (size_t) argc + 1);
+
+ /* very simple arg parsing; don't want to rely on getopt
+ * also, copy all non cwrapper options to newargz, except
+ * argz[0], which is handled differently
+ */
+ newargc=0;
+ for (i = 1; i < argc; i++)
+ {
+ if (STREQ (argv[i], dumpscript_opt))
+ {
+EOF
+ case $host in
+ *mingw* | *cygwin* )
+ # make stdout use "unix" line endings
+ echo " setmode(1,_O_BINARY);"
+ ;;
+ esac
+
+ cat <<"EOF"
+ lt_dump_script (stdout);
+ return 0;
+ }
+ if (STREQ (argv[i], debug_opt))
+ {
+ lt_debug = 1;
+ continue;
+ }
+ if (STREQ (argv[i], ltwrapper_option_prefix))
+ {
+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+ namespace, but it is not one of the ones we know about and
+ have already dealt with, above (inluding dump-script), then
+ report an error. Otherwise, targets might begin to believe
+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+ namespace. The first time any user complains about this, we'll
+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+ or a configure.ac-settable value.
+ */
+ lt_fatal (__FILE__, __LINE__,
+ "unrecognized %s option: '%s'",
+ ltwrapper_option_prefix, argv[i]);
+ }
+ /* otherwise ... */
+ newargz[++newargc] = xstrdup (argv[i]);
+ }
+ newargz[++newargc] = NULL;
+
+EOF
+ cat <<EOF
+ /* The GNU banner must be the first non-error debug message */
+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE)
$VERSION\n");
+EOF
+ cat <<"EOF"
+ lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n",
program_name);
+
+ tmp_pathspec = find_executable (argv[0]);
+ if (tmp_pathspec == NULL)
+ lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (before symlink chase) at: %s\n",
+ tmp_pathspec);
+
+ actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (after symlink chase) at: %s\n",
+ actual_cwrapper_path);
+ XFREE (tmp_pathspec);
+
+ actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+ strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+ /* wrapper name transforms */
+ strendzap (actual_cwrapper_name, ".exe");
+ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+ XFREE (actual_cwrapper_name);
+ actual_cwrapper_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ /* target_name transforms -- use actual target program name; might have lt-
prefix */
+ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+ strendzap (target_name, ".exe");
+ tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+ XFREE (target_name);
+ target_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) libtool target name: %s\n",
+ target_name);
+EOF
+
+ cat <<EOF
+ newargz[0] =
+ XMALLOC (char, (strlen (actual_cwrapper_path) +
+ strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) +
1));
+ strcpy (newargz[0], actual_cwrapper_path);
+ strcat (newargz[0], "$objdir");
+ strcat (newargz[0], "/");
+EOF
+
+ cat <<"EOF"
+ /* stop here, and copy so we don't have to do this twice */
+ tmp_pathspec = xstrdup (newargz[0]);
+
+ /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+ strcat (newargz[0], actual_cwrapper_name);
+
+ /* DO want the lt- prefix here if it exists, so use target_name */
+ lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+ XFREE (tmp_pathspec);
+ tmp_pathspec = NULL;
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ {
+ char* p;
+ while ((p = strchr (newargz[0], '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ }
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+ XFREE (target_name);
+ XFREE (actual_cwrapper_path);
+ XFREE (actual_cwrapper_name);
+
+ lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+ lt_setenv ("DUALCASE", "1"); /* for MSK sh */
+ /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
+ be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+ because on Windows, both *_VARNAMEs are PATH but uninstalled
+ libraries must come first. */
+ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+ nonnull (lt_argv_zero));
+ for (i = 0; i < newargc; i++)
+ {
+ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+ i, nonnull (newargz[i]));
+ }
+
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ /* execv doesn't actually work on mingw as expected on unix */
+ newargz = prepare_spawn (newargz);
+ rval = (int) _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+ if (rval == -1)
+ {
+ /* failed to start process */
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) failed to launch target \"%s\": %s\n",
+ lt_argv_zero, nonnull (strerror (errno)));
+ return 127;
+ }
+ return rval;
+EOF
+ ;;
+ *)
+ cat <<"EOF"
+ execv (lt_argv_zero, newargz);
+ return rval; /* =127, but avoids unused variable warning */
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+ void *p = (void *) malloc (num);
+ if (!p)
+ lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+ return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+ string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+ const char *base;
+
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+ /* Skip over the disk name in MSDOS pathnames. */
+ if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+ name += 2;
+#endif
+
+ for (base = name; *name; name++)
+ if (IS_DIR_SEPARATOR (*name))
+ base = name + 1;
+ return base;
+}
+
+int
+check_executable (const char *path)
+{
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if ((stat (path, &st) >= 0)
+ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+ return 1;
+ else
+ return 0;
+}
+
+int
+make_executable (const char *path)
+{
+ int rval = 0;
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if (stat (path, &st) >= 0)
+ {
+ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+ }
+ return rval;
+}
+
+/* Searches for the full path of the wrapper. Returns
+ newly allocated full path name if found, NULL otherwise
+ Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+ int has_slash = 0;
+ const char *p;
+ const char *p_next;
+ /* static buffer for getcwd */
+ char tmp[LT_PATHMAX + 1];
+ size_t tmp_len;
+ char *concat_name;
+
+ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+ nonempty (wrapper));
+
+ if ((wrapper == NULL) || (*wrapper == '\0'))
+ return NULL;
+
+ /* Absolute path? */
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ else
+ {
+#endif
+ if (IS_DIR_SEPARATOR (wrapper[0]))
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+ }
+#endif
+
+ for (p = wrapper; *p; p++)
+ if (*p == '/')
+ {
+ has_slash = 1;
+ break;
+ }
+ if (!has_slash)
+ {
+ /* no slashes; search PATH */
+ const char *path = getenv ("PATH");
+ if (path != NULL)
+ {
+ for (p = path; *p; p = p_next)
+ {
+ const char *q;
+ size_t p_len;
+ for (q = p; *q; q++)
+ if (IS_PATH_SEPARATOR (*q))
+ break;
+ p_len = (size_t) (q - p);
+ p_next = (*q == '\0' ? q : q + 1);
+ if (p_len == 0)
+ {
+ /* empty path: current directory */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name =
+ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+ }
+ else
+ {
+ concat_name =
+ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, p, p_len);
+ concat_name[p_len] = '/';
+ strcpy (concat_name + p_len + 1, wrapper);
+ }
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ }
+ /* not found in PATH; assume curdir */
+ }
+ /* Relative path | not found in path: prepend cwd */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+ return xstrdup (pathspec);
+#else
+ char buf[LT_PATHMAX];
+ struct stat s;
+ char *tmp_pathspec = xstrdup (pathspec);
+ char *p;
+ int has_symlinks = 0;
+ while (strlen (tmp_pathspec) && !has_symlinks)
+ {
+ lt_debugprintf (__FILE__, __LINE__,
+ "checking path component for symlinks: %s\n",
+ tmp_pathspec);
+ if (lstat (tmp_pathspec, &s) == 0)
+ {
+ if (S_ISLNK (s.st_mode) != 0)
+ {
+ has_symlinks = 1;
+ break;
+ }
+
+ /* search backwards for last DIR_SEPARATOR */
+ p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ p--;
+ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ {
+ /* no more DIR_SEPARATORS left */
+ break;
+ }
+ *p = '\0';
+ }
+ else
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "error accessing file \"%s\": %s",
+ tmp_pathspec, nonnull (strerror (errno)));
+ }
+ }
+ XFREE (tmp_pathspec);
+
+ if (!has_symlinks)
+ {
+ return xstrdup (pathspec);
+ }
+
+ tmp_pathspec = realpath (pathspec, buf);
+ if (tmp_pathspec == 0)
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "could not follow symlinks for %s", pathspec);
+ }
+ return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+ size_t len, patlen;
+
+ assert (str != NULL);
+ assert (pat != NULL);
+
+ len = strlen (str);
+ patlen = strlen (pat);
+
+ if (patlen <= len)
+ {
+ str += len - patlen;
+ if (STREQ (str, pat))
+ *str = '\0';
+ }
+ return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+ va_list args;
+ if (lt_debug)
+ {
+ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+ va_start (args, fmt);
+ (void) vfprintf (stderr, fmt, args);
+ va_end (args);
+ }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+ int line, const char *mode,
+ const char *message, va_list ap)
+{
+ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+ vfprintf (stderr, message, ap);
+ fprintf (stderr, ".\n");
+
+ if (exit_status >= 0)
+ exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+ va_list ap;
+ va_start (ap, message);
+ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+ va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+ return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+ return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_setenv) setting '%s' to '%s'\n",
+ nonnull (name), nonnull (value));
+ {
+#ifdef HAVE_SETENV
+ /* always make a copy, for consistency with !HAVE_SETENV */
+ char *str = xstrdup (value);
+ setenv (name, str, 1);
+#else
+ size_t len = strlen (name) + 1 + strlen (value) + 1;
+ char *str = XMALLOC (char, len);
+ sprintf (str, "%s=%s", name, value);
+ if (putenv (str) != EXIT_SUCCESS)
+ {
+ XFREE (str);
+ }
+#endif
+ }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+ char *new_value;
+ if (orig_value && *orig_value)
+ {
+ size_t orig_value_len = strlen (orig_value);
+ size_t add_len = strlen (add);
+ new_value = XMALLOC (char, add_len + orig_value_len + 1);
+ if (to_end)
+ {
+ strcpy (new_value, orig_value);
+ strcpy (new_value + orig_value_len, add);
+ }
+ else
+ {
+ strcpy (new_value, add);
+ strcpy (new_value + add_len, orig_value);
+ }
+ }
+ else
+ {
+ new_value = xstrdup (add);
+ }
+ return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ /* some systems can't cope with a ':'-terminated path #' */
+ size_t len = strlen (new_value);
+ while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ {
+ new_value[--len] = '\0';
+ }
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+EOF
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+ Note that spawn() does not by itself call the command interpreter
+ (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+ ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+ GetVersionEx(&v);
+ v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+ }) ? "cmd.exe" : "command.com").
+ Instead it simply concatenates the arguments, separated by ' ', and calls
+ CreateProcess(). We must quote the arguments since Win32 CreateProcess()
+ interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+ special way:
+ - Space and tab are interpreted as delimiters. They are not treated as
+ delimiters if they are surrounded by double quotes: "...".
+ - Unescaped double quotes are removed from the input. Their only effect is
+ that within double quotes, space and tab are treated like normal
+ characters.
+ - Backslashes not followed by double quotes are not special.
+ - But 2*n+1 backslashes followed by a double quote become
+ n backslashes followed by a double quote (n >= 0):
+ \" -> "
+ \\\" -> \"
+ \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\
\001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS "
\001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+ size_t argc;
+ char **new_argv;
+ size_t i;
+
+ /* Count number of arguments. */
+ for (argc = 0; argv[argc] != NULL; argc++)
+ ;
+
+ /* Allocate new argument vector. */
+ new_argv = XMALLOC (char *, argc + 1);
+
+ /* Put quoted arguments into the new argument vector. */
+ for (i = 0; i < argc; i++)
+ {
+ const char *string = argv[i];
+
+ if (string[0] == '\0')
+ new_argv[i] = xstrdup ("\"\"");
+ else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+ {
+ int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+ size_t length;
+ unsigned int backslashes;
+ const char *s;
+ char *quoted_string;
+ char *p;
+
+ length = 0;
+ backslashes = 0;
+ if (quote_around)
+ length++;
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ length += backslashes + 1;
+ length++;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ length += backslashes + 1;
+
+ quoted_string = XMALLOC (char, length + 1);
+
+ p = quoted_string;
+ backslashes = 0;
+ if (quote_around)
+ *p++ = '"';
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ {
+ unsigned int j;
+ for (j = backslashes + 1; j > 0; j--)
+ *p++ = '\\';
+ }
+ *p++ = c;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ {
+ unsigned int j;
+ for (j = backslashes; j > 0; j--)
+ *p++ = '\\';
+ *p++ = '"';
+ }
+ *p = '\0';
+
+ new_argv[i] = quoted_string;
+ }
+ else
+ new_argv[i] = (char *) string;
+ }
+ new_argv[argc] = NULL;
+
+ return new_argv;
+}
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+ func_emit_wrapper yes |
+ $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/ fputs ("\1", f);/p
+g
+D'
+ cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+ $debug_cmd
+
+ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+ *import*) : ;;
+ *) false ;;
+ esac
+}
+
+# func_suncc_cstd_abi
+# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
+# Several compiler flags select an ABI that is incompatible with the
+# Cstd library. Avoid specifying it if any are in CXXFLAGS.
+func_suncc_cstd_abi ()
+{
+ $debug_cmd
+
+ case " $compile_command " in
+ *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*"
-library=stlport4 "*)
+ suncc_use_cstd_abi=no
+ ;;
+ *)
+ suncc_use_cstd_abi=yes
+ ;;
+ esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+ $debug_cmd
+
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ # It is impossible to link a dll without this setting, and
+ # we shouldn't force the makefile maintainer to figure out
+ # what system we are compiling for in order to pass an extra
+ # flag for every libtool invocation.
+ # allow_undefined=no
+
+ # FIXME: Unfortunately, there are problems with the above when trying
+ # to make a dll that has undefined symbols, in which case not
+ # even a static library is built. For now, we need to specify
+ # -no-undefined on the libtool link line when we can be certain
+ # that all symbols are satisfied, otherwise we get a static library.
+ allow_undefined=yes
+ ;;
+ *)
+ allow_undefined=yes
+ ;;
+ esac
+ libtool_args=$nonopt
+ base_compile="$nonopt $@"
+ compile_command=$nonopt
+ finalize_command=$nonopt
+
+ compile_rpath=
+ finalize_rpath=
+ compile_shlibpath=
+ finalize_shlibpath=
+ convenience=
+ old_convenience=
+ deplibs=
+ old_deplibs=
+ compiler_flags=
+ linker_flags=
+ dllsearchpath=
+ lib_search_path=`pwd`
+ inst_prefix_dir=
+ new_inherited_linker_flags=
+
+ avoid_version=no
+ bindir=
+ dlfiles=
+ dlprefiles=
+ dlself=no
+ export_dynamic=no
+ export_symbols=
+ export_symbols_regex=
+ generated=
+ libobjs=
+ ltlibs=
+ module=no
+ no_install=no
+ objs=
+ os2dllname=
+ non_pic_objects=
+ precious_files_regex=
+ prefer_static_libs=no
+ preload=false
+ prev=
+ prevarg=
+ release=
+ rpath=
+ xrpath=
+ perm_rpath=
+ temp_rpath=
+ thread_safe=no
+ vinfo=
+ vinfo_number=no
+ weak_libs=
+ single_module=$wl-single_module
+ func_infer_tag $base_compile
+
+ # We need to know -static, to get the right output filenames.
+ for arg
+ do
+ case $arg in
+ -shared)
+ test yes != "$build_libtool_libs" \
+ && func_fatal_configuration "cannot build a shared library"
+ build_old_libs=no
+ break
+ ;;
+ -all-static | -static | -static-libtool-libs)
+ case $arg in
+ -all-static)
+ if test yes = "$build_libtool_libs" && test -z "$link_static_flag";
then
+ func_warning "complete static linking is impossible in this
configuration"
+ fi
+ if test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ -static)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=built
+ ;;
+ -static-libtool-libs)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ esac
+ build_libtool_libs=no
+ build_old_libs=yes
+ break
+ ;;
+ esac
+ done
+
+ # See if our shared archives depend on static archives.
+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+ # Go through the arguments, transforming them on the way.
+ while test "$#" -gt 0; do
+ arg=$1
+ shift
+ func_quote_arg pretty,unquoted "$arg"
+ qarg=$func_quote_arg_unquoted_result
+ func_append libtool_args " $func_quote_arg_result"
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ case $prev in
+ output)
+ func_append compile_command " @OUTPUT@"
+ func_append finalize_command " @OUTPUT@"
+ ;;
+ esac
+
+ case $prev in
+ bindir)
+ bindir=$arg
+ prev=
+ continue
+ ;;
+ dlfiles|dlprefiles)
+ $preload || {
+ # Add the symbol object into the linking commands.
+ func_append compile_command " @SYMFILE@"
+ func_append finalize_command " @SYMFILE@"
+ preload=:
+ }
+ case $arg in
+ *.la | *.lo) ;; # We handle these cases below.
+ force)
+ if test no = "$dlself"; then
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ self)
+ if test dlprefiles = "$prev"; then
+ dlself=yes
+ elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
+ dlself=yes
+ else
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ *)
+ if test dlfiles = "$prev"; then
+ func_append dlfiles " $arg"
+ else
+ func_append dlprefiles " $arg"
+ fi
+ prev=
+ continue
+ ;;
+ esac
+ ;;
+ expsyms)
+ export_symbols=$arg
+ test -f "$arg" \
+ || func_fatal_error "symbol file '$arg' does not exist"
+ prev=
+ continue
+ ;;
+ expsyms_regex)
+ export_symbols_regex=$arg
+ prev=
+ continue
+ ;;
+ framework)
+ case $host in
+ *-*-darwin*)
+ case "$deplibs " in
+ *" $qarg.ltframework "*) ;;
+ *) func_append deplibs " $qarg.ltframework" # this is fixed
later
+ ;;
+ esac
+ ;;
+ esac
+ prev=
+ continue
+ ;;
+ inst_prefix)
+ inst_prefix_dir=$arg
+ prev=
+ continue
+ ;;
+ mllvm)
+ # Clang does not use LLVM to link, so we can simply discard any
+ # '-mllvm $arg' options when doing the link step.
+ prev=
+ continue
+ ;;
+ objectlist)
+ if test -f "$arg"; then
+ save_arg=$arg
+ moreargs=
+ for fil in `cat "$save_arg"`
+ do
+# func_append moreargs " $fil"
+ arg=$fil
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test none = "$pic_object" &&
+ test none = "$non_pic_object"; then
+ func_fatal_error "cannot find name of object for '$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir=$func_dirname_result
+
+ if test none != "$pic_object"; then
+ # Prepend the subdirectory the object is found in.
+ pic_object=$xdir$pic_object
+
+ if test dlfiles = "$prev"; then
+ if test yes = "$build_libtool_libs" && test yes =
"$dlopen_support"; then
+ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to
preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test dlprefiles = "$prev"; then
+ # Preload the old-style object.
+ func_append dlprefiles " $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg=$pic_object
+ fi
+
+ # Non-PIC object.
+ if test none != "$non_pic_object"; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object=$xdir$non_pic_object
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test none = "$pic_object"; then
+ arg=$non_pic_object
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object=$pic_object
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir=$func_dirname_result
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "'$arg' is not a valid libtool object"
+ fi
+ fi
+ done
+ else
+ func_fatal_error "link input file '$arg' does not exist"
+ fi
+ arg=$save_arg
+ prev=
+ continue
+ ;;
+ os2dllname)
+ os2dllname=$arg
+ prev=
+ continue
+ ;;
+ precious_regex)
+ precious_files_regex=$arg
+ prev=
+ continue
+ ;;
+ release)
+ release=-$arg
+ prev=
+ continue
+ ;;
+ rpath | xrpath)
+ # We need an absolute path.
+ case $arg in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ if test rpath = "$prev"; then
+ case "$rpath " in
+ *" $arg "*) ;;
+ *) func_append rpath " $arg" ;;
+ esac
+ else
+ case "$xrpath " in
+ *" $arg "*) ;;
+ *) func_append xrpath " $arg" ;;
+ esac
+ fi
+ prev=
+ continue
+ ;;
+ shrext)
+ shrext_cmds=$arg
+ prev=
+ continue
+ ;;
+ weak)
+ func_append weak_libs " $arg"
+ prev=
+ continue
+ ;;
+ xassembler)
+ func_append compiler_flags " -Xassembler $qarg"
+ prev=
+ func_append compile_command " -Xassembler $qarg"
+ func_append finalize_command " -Xassembler $qarg"
+ continue
+ ;;
+ xcclinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xcompiler)
+ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xlinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $wl$qarg"
+ prev=
+ func_append compile_command " $wl$qarg"
+ func_append finalize_command " $wl$qarg"
+ continue
+ ;;
+ *)
+ eval "$prev=\"\$arg\""
+ prev=
+ continue
+ ;;
+ esac
+ fi # test -n "$prev"
+
+ prevarg=$arg
+
+ case $arg in
+ -all-static)
+ if test -n "$link_static_flag"; then
+ # See comment for -static flag below, for more details.
+ func_append compile_command " $link_static_flag"
+ func_append finalize_command " $link_static_flag"
+ fi
+ continue
+ ;;
+
+ -allow-undefined)
+ # FIXME: remove this flag sometime in the future.
+ func_fatal_error "'-allow-undefined' must not be used because it is the
default"
+ ;;
+
+ -avoid-version)
+ avoid_version=yes
+ continue
+ ;;
+
+ -bindir)
+ prev=bindir
+ continue
+ ;;
+
+ -dlopen)
+ prev=dlfiles
+ continue
+ ;;
+
+ -dlpreopen)
+ prev=dlprefiles
+ continue
+ ;;
+
+ -export-dynamic)
+ export_dynamic=yes
+ continue
+ ;;
+
+ -export-symbols | -export-symbols-regex)
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ func_fatal_error "more than one -exported-symbols argument is not
allowed"
+ fi
+ if test X-export-symbols = "X$arg"; then
+ prev=expsyms
+ else
+ prev=expsyms_regex
+ fi
+ continue
+ ;;
+
+ -framework)
+ prev=framework
+ continue
+ ;;
+
+ -inst-prefix-dir)
+ prev=inst_prefix
+ continue
+ ;;
+
+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+ # so, if we see these flags be careful not to treat them like -L
+ -L[A-Z][A-Z]*:*)
+ case $with_gcc/$host in
+ no/*-*-irix* | /*-*-irix*)
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ ;;
+ esac
+ continue
+ ;;
+
+ -L*)
+ func_stripname "-L" '' "$arg"
+ if test -z "$func_stripname_result"; then
+ if test "$#" -gt 0; then
+ func_fatal_error "require no space between '-L' and '$1'"
+ else
+ func_fatal_error "need path for '-L' option"
+ fi
+ fi
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ test -z "$absdir" && \
+ func_fatal_error "cannot determine absolute directory name of
'$dir'"
+ dir=$absdir
+ ;;
+ esac
+ case "$deplibs " in
+ *" -L$dir "* | *" $arg "*)
+ # Will only happen for absolute or sysroot arguments
+ ;;
+ *)
+ # Preserve sysroot, but never include relative directories
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+ *) func_append deplibs " -L$dir" ;;
+ esac
+ func_append lib_search_path " $dir"
+ ;;
+ esac
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$dir:"*) ;;
+ ::) dllsearchpath=$dir;;
+ *) func_append dllsearchpath ":$dir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+ continue
+ ;;
+
+ -l*)
+ if test X-lc = "X$arg" || test X-lm = "X$arg"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* |
*-*-haiku*)
+ # These systems don't actually have a C or math library (as such)
+ continue
+ ;;
+ *-*-os2*)
+ # These systems don't actually have a C library (as such)
+ test X-lc = "X$arg" && continue
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig* |
*-*-midnightbsd*)
+ # Do not include libc due to us having libc/libc_r.
+ test X-lc = "X$arg" && continue
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C and math libraries are in the System framework
+ func_append deplibs " System.ltframework"
+ continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ test X-lc = "X$arg" && continue
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ test X-lc = "X$arg" && continue
+ ;;
+ esac
+ elif test X-lc_r = "X$arg"; then
+ case $host in
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig* |
*-*-midnightbsd*)
+ # Do not include libc_r directly, use -pthread flag.
+ continue
+ ;;
+ esac
+ fi
+ func_append deplibs " $arg"
+ continue
+ ;;
+
+ -mllvm)
+ prev=mllvm
+ continue
+ ;;
+
+ -module)
+ module=yes
+ continue
+ ;;
+
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ # Darwin uses the -arch flag to determine output architecture.
+ -model|-arch|-isysroot|--sysroot)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ prev=xcompiler
+ continue
+ ;;
+ # Solaris ld rejects as of 11.4. Refer to Oracle bug 22985199.
+ -pthread)
+ case $host in
+ *solaris2*) ;;
+ *)
+ case "$new_inherited_linker_flags " in
+ *" $arg "*) ;;
+ * ) func_append new_inherited_linker_flags " $arg" ;;
+ esac
+ ;;
+ esac
+ continue
+ ;;
+ -mt|-mthreads|-kthread|-Kthread|-pthreads|--thread-safe \
+ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case "$new_inherited_linker_flags " in
+ *" $arg "*) ;;
+ * ) func_append new_inherited_linker_flags " $arg" ;;
+ esac
+ continue
+ ;;
+
+ -multi_module)
+ single_module=$wl-multi_module
+ continue
+ ;;
+
+ -no-fast-install)
+ fast_install=no
+ continue
+ ;;
+
+ -no-install)
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* |
*-cegcc*)
+ # The PATH hackery in wrapper scripts is required on Windows
+ # and Darwin in order for the loader to find any dlls it needs.
+ func_warning "'-no-install' is ignored for $host"
+ func_warning "assuming '-no-fast-install' instead"
+ fast_install=no
+ ;;
+ *) no_install=yes ;;
+ esac
+ continue
+ ;;
+
+ -no-undefined)
+ allow_undefined=no
+ continue
+ ;;
+
+ -objectlist)
+ prev=objectlist
+ continue
+ ;;
+
+ -os2dllname)
+ prev=os2dllname
+ continue
+ ;;
+
+ -o) prev=output ;;
+
+ -precious-files-regex)
+ prev=precious_regex
+ continue
+ ;;
+
+ -release)
+ prev=release
+ continue
+ ;;
+
+ -rpath)
+ prev=rpath
+ continue
+ ;;
+
+ -R)
+ prev=xrpath
+ continue
+ ;;
+
+ -R*)
+ func_stripname '-R' '' "$arg"
+ dir=$func_stripname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ =*)
+ func_stripname '=' '' "$dir"
+ dir=$lt_sysroot$func_stripname_result
+ ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) func_append xrpath " $dir" ;;
+ esac
+ continue
+ ;;
+
+ -shared)
+ # The effects of -shared are defined in a previous loop.
+ continue
+ ;;
+
+ -shrext)
+ prev=shrext
+ continue
+ ;;
+
+ -static | -static-libtool-libs)
+ # The effects of -static are defined in a previous loop.
+ # We used to do the same as -all-static on platforms that
+ # didn't have a PIC flag, but the assumption that the effects
+ # would be equivalent was wrong. It would break on at least
+ # Digital Unix and AIX.
+ continue
+ ;;
+
+ -thread-safe)
+ thread_safe=yes
+ continue
+ ;;
+
+ -version-info)
+ prev=vinfo
+ continue
+ ;;
+
+ -version-number)
+ prev=vinfo
+ vinfo_number=yes
+ continue
+ ;;
+
+ -weak)
+ prev=weak
+ continue
+ ;;
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs=$IFS; IFS=,
+ for flag in $args; do
+ IFS=$save_ifs
+ func_quote_arg pretty "$flag"
+ func_append arg " $func_quote_arg_result"
+ func_append compiler_flags " $func_quote_arg_result"
+ done
+ IFS=$save_ifs
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Wl,*)
+ func_stripname '-Wl,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs=$IFS; IFS=,
+ for flag in $args; do
+ IFS=$save_ifs
+ func_quote_arg pretty "$flag"
+ func_append arg " $wl$func_quote_arg_result"
+ func_append compiler_flags " $wl$func_quote_arg_result"
+ func_append linker_flags " $func_quote_arg_result"
+ done
+ IFS=$save_ifs
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Xassembler)
+ prev=xassembler
+ continue
+ ;;
+
+ -Xcompiler)
+ prev=xcompiler
+ continue
+ ;;
+
+ -Xlinker)
+ prev=xlinker
+ continue
+ ;;
+
+ -XCClinker)
+ prev=xcclinker
+ continue
+ ;;
+
+ # -msg_* for osf cc
+ -msg_*)
+ func_quote_arg pretty "$arg"
+ arg=$func_quote_arg_result
+ ;;
+
+ # Flags to be passed through unchanged, with rationale:
+ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
+ # -r[0-9][0-9]* specify processor for the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+ # +DA*, +DD* enable 64-bit mode for the HP compiler
+ # -q* compiler args for the IBM compiler
+ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+ # -F/path path to uninstalled frameworks, gcc on darwin
+ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
+ # -fstack-protector* stack protector flags for GCC
+ # @file GCC response files
+ # -tp=* Portland pgcc target processor selection
+ # --sysroot=* for sysroot support
+ # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time
optimization
+ # -specs=* GCC specs files
+ # -stdlib=* select c++ std lib with clang
+ # -fsanitize=* Clang/GCC memory and address sanitizer
+ # -fuse-ld=* Linker select flags for GCC
+ # -static-* direct GCC to link specific libraries statically
+ # -fcilkplus Cilk Plus language extension features for C/C++
+ # -Wa,* Pass flags directly to the assembler
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+
-t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+
-O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*| \
+ -specs=*|-fsanitize=*|-fuse-ld=*|-static-*|-fcilkplus|-Wa,*)
+ func_quote_arg pretty "$arg"
+ arg=$func_quote_arg_result
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ func_append compiler_flags " $arg"
+ continue
+ ;;
+
+ -Z*)
+ if test os2 = "`expr $host : '.*\(os2\)'`"; then
+ # OS/2 uses -Zxxx to specify OS/2-specific options
+ compiler_flags="$compiler_flags $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case $arg in
+ -Zlinker | -Zstack)
+ prev=xcompiler
+ ;;
+ esac
+ continue
+ else
+ # Otherwise treat like 'Some other compiler flag' below
+ func_quote_arg pretty "$arg"
+ arg=$func_quote_arg_result
+ fi
+ ;;
+
+ # Some other compiler flag.
+ -* | +*)
+ func_quote_arg pretty "$arg"
+ arg=$func_quote_arg_result
+ ;;
+
+ *.$objext)
+ # A standard object.
+ func_append objs " $arg"
+ ;;
+
+ *.lo)
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test none = "$pic_object" &&
+ test none = "$non_pic_object"; then
+ func_fatal_error "cannot find name of object for '$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir=$func_dirname_result
+
+ test none = "$pic_object" || {
+ # Prepend the subdirectory the object is found in.
+ pic_object=$xdir$pic_object
+
+ if test dlfiles = "$prev"; then
+ if test yes = "$build_libtool_libs" && test yes =
"$dlopen_support"; then
+ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test dlprefiles = "$prev"; then
+ # Preload the old-style object.
+ func_append dlprefiles " $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg=$pic_object
+ }
+
+ # Non-PIC object.
+ if test none != "$non_pic_object"; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object=$xdir$non_pic_object
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test none = "$pic_object"; then
+ arg=$non_pic_object
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object=$pic_object
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir=$func_dirname_result
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "'$arg' is not a valid libtool object"
+ fi
+ fi
+ ;;
+
+ *.$libext)
+ # An archive.
+ func_append deplibs " $arg"
+ func_append old_deplibs " $arg"
+ continue
+ ;;
+
+ *.la)
+ # A libtool-controlled library.
+
+ func_resolve_sysroot "$arg"
+ if test dlfiles = "$prev"; then
+ # This library was specified with -dlopen.
+ func_append dlfiles " $func_resolve_sysroot_result"
+ prev=
+ elif test dlprefiles = "$prev"; then
+ # The library was specified with -dlpreopen.
+ func_append dlprefiles " $func_resolve_sysroot_result"
+ prev=
+ else
+ func_append deplibs " $func_resolve_sysroot_result"
+ fi
+ continue
+ ;;
+
+ # Some other compiler argument.
+ *)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ func_quote_arg pretty "$arg"
+ arg=$func_quote_arg_result
+ ;;
+ esac # arg
+
+ # Now actually substitute the argument into the commands.
+ if test -n "$arg"; then
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+ done # argument parsing loop
+
+ test -n "$prev" && \
+ func_fatal_help "the '$prevarg' option requires an argument"
+
+ if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec";
then
+ eval arg=\"$export_dynamic_flag_spec\"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+
+ oldlibs=
+ # calculate the name of the file, without its directory
+ func_basename "$output"
+ outputname=$func_basename_result
+ libobjs_save=$libobjs
+
+ if test -n "$shlibpath_var"; then
+ # get the directories listed in $shlibpath_var
+ eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/
/g\'\`
+ else
+ shlib_search_path=
+ fi
+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+ # Definition is injected by LT_CONFIG during libtool generation.
+ func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"
+
+ func_dirname "$output" "/" ""
+ output_objdir=$func_dirname_result$objdir
+ func_to_tool_file "$output_objdir/"
+ tool_output_objdir=$func_to_tool_file_result
+ # Create the object directory.
+ func_mkdir_p "$output_objdir"
+
+ # Determine the type of output
+ case $output in
+ "")
+ func_fatal_help "you must specify an output file"
+ ;;
+ *.$libext) linkmode=oldlib ;;
+ *.lo | *.$objext) linkmode=obj ;;
+ *.la) linkmode=lib ;;
+ *) linkmode=prog ;; # Anything else should be a program.
+ esac
+
+ specialdeplibs=
+
+ libs=
+ # Find all interdependent deplibs by searching for libraries
+ # that are linked more than once (e.g. -la -lb -la)
+ for deplib in $deplibs; do
+ if $opt_preserve_dup_deps; then
+ case "$libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append libs " $deplib"
+ done
+
+ if test lib = "$linkmode"; then
+ libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+ # Compute libraries that are listed more than once in $predeps
+ # $postdeps and mark them as special (i.e., whose duplicates are
+ # not to be eliminated).
+ pre_post_deps=
+ if $opt_duplicate_compiler_generated_deps; then
+ for pre_post_dep in $predeps $postdeps; do
+ case "$pre_post_deps " in
+ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+ esac
+ func_append pre_post_deps " $pre_post_dep"
+ done
+ fi
+ pre_post_deps=
+ fi
+
+ deplibs=
+ newdependency_libs=
+ newlib_search_path=
+ need_relink=no # whether we're linking any uninstalled libtool libraries
+ notinst_deplibs= # not-installed libtool libraries
+ notinst_path= # paths that contain not-installed libtool libraries
+
+ case $linkmode in
+ lib)
+ passes="conv dlpreopen link"
+ for file in $dlfiles $dlprefiles; do
+ case $file in
+ *.la) ;;
+ *)
+ func_fatal_help "libraries can '-dlopen' only libtool libraries:
$file"
+ ;;
+ esac
+ done
+ ;;
+ prog)
+ compile_deplibs=
+ finalize_deplibs=
+ alldeplibs=false
+ newdlfiles=
+ newdlprefiles=
+ passes="conv scan dlopen dlpreopen link"
+ ;;
+ *) passes="conv"
+ ;;
+ esac
+
+ for pass in $passes; do
+ # The preopen pass in lib mode reverses $deplibs; put it back here
+ # so that -L comes before libs that need it for instance...
+ if test lib,link = "$linkmode,$pass"; then
+ ## FIXME: Find the place where the list is rebuilt in the wrong
+ ## order, and fix it there properly
+ tmp_deplibs=
+ for deplib in $deplibs; do
+ tmp_deplibs="$deplib $tmp_deplibs"
+ done
+ deplibs=$tmp_deplibs
+ fi
+
+ if test lib,link = "$linkmode,$pass" ||
+ test prog,scan = "$linkmode,$pass"; then
+ libs=$deplibs
+ deplibs=
+ fi
+ if test prog = "$linkmode"; then
+ case $pass in
+ dlopen) libs=$dlfiles ;;
+ dlpreopen) libs=$dlprefiles ;;
+ link)
+ libs="$deplibs %DEPLIBS%"
+ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
+ ;;
+ esac
+ fi
+ if test lib,dlpreopen = "$linkmode,$pass"; then
+ # Collect and forward deplibs of preopened libtool libs
+ for lib in $dlprefiles; do
+ # Ignore non-libtool-libs
+ dependency_libs=
+ func_resolve_sysroot "$lib"
+ case $lib in
+ *.la) func_source "$func_resolve_sysroot_result" ;;
+ esac
+
+ # Collect preopened libtool deplibs, except any this library
+ # has declared as weak libs
+ for deplib in $dependency_libs; do
+ func_basename "$deplib"
+ deplib_base=$func_basename_result
+ case " $weak_libs " in
+ *" $deplib_base "*) ;;
+ *) func_append deplibs " $deplib" ;;
+ esac
+ done
+ done
+ libs=$dlprefiles
+ fi
+ if test dlopen = "$pass"; then
+ # Collect dlpreopened libraries
+ save_deplibs=$deplibs
+ deplibs=
+ fi
+
+ for deplib in $libs; do
+ lib=
+ found=false
+ case $deplib in
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+ if test prog,link = "$linkmode,$pass"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ func_append compiler_flags " $deplib"
+ if test lib = "$linkmode"; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -l*)
+ if test lib != "$linkmode" && test prog != "$linkmode"; then
+ func_warning "'-l' is ignored for archives/objects"
+ continue
+ fi
+ func_stripname '-l' '' "$deplib"
+ name=$func_stripname_result
+ if test lib = "$linkmode"; then
+ searchdirs="$newlib_search_path $lib_search_path
$compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+ else
+ searchdirs="$newlib_search_path $lib_search_path
$sys_lib_search_path $shlib_search_path"
+ fi
+ for searchdir in $searchdirs; do
+ for search_ext in .la $std_shrext .so .a; do
+ # Search the libtool library
+ lib=$searchdir/lib$name$search_ext
+ if test -f "$lib"; then
+ if test .la = "$search_ext"; then
+ found=:
+ else
+ found=false
+ fi
+ break 2
+ fi
+ done
+ done
+ if $found; then
+ # deplib is a libtool library
+ # If $allow_libtool_libs_with_static_runtimes && $deplib is a
stdlib,
+ # We need to do some special things here, and not later.
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+ case " $predeps $postdeps " in
+ *" $deplib "*)
+ if func_lalib_p "$lib"; then
+ library_names=
+ old_library=
+ func_source "$lib"
+ for l in $old_library $library_names; do
+ ll=$l
+ done
+ if test "X$ll" = "X$old_library"; then # only static version
available
+ found=false
+ func_dirname "$lib" "" "."
+ ladir=$func_dirname_result
+ lib=$ladir/$old_library
+ if test prog,link = "$linkmode,$pass"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test lib = "$linkmode" && newdependency_libs="$deplib
$newdependency_libs"
+ fi
+ continue
+ fi
+ fi
+ ;;
+ *) ;;
+ esac
+ fi
+ else
+ # deplib doesn't seem to be a libtool library
+ if test prog,link = "$linkmode,$pass"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test lib = "$linkmode" && newdependency_libs="$deplib
$newdependency_libs"
+ fi
+ continue
+ fi
+ ;; # -l
+ *.ltframework)
+ if test prog,link = "$linkmode,$pass"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ if test lib = "$linkmode"; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -L*)
+ case $linkmode in
+ lib)
+ deplibs="$deplib $deplibs"
+ test conv = "$pass" && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ prog)
+ if test conv = "$pass"; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ if test scan = "$pass"; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ *)
+ func_warning "'-L' is ignored for archives/objects"
+ ;;
+ esac # linkmode
+ continue
+ ;; # -L
+ -R*)
+ if test link = "$pass"; then
+ func_stripname '-R' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
+ # Make sure the xrpath contains only unique directories.
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) func_append xrpath " $dir" ;;
+ esac
+ fi
+ deplibs="$deplib $deplibs"
+ continue
+ ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ lib=$func_resolve_sysroot_result
+ ;;
+ *.$libext)
+ if test conv = "$pass"; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ case $linkmode in
+ lib)
+ # Linking convenience modules into shared libraries is allowed,
+ # but linking other static libraries is non-portable.
+ case " $dlpreconveniencelibs " in
+ *" $deplib "*) ;;
+ *)
+ valid_a_lib=false
+ case $deplibs_check_method in
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1
\(.*\)"`
+ if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ valid_a_lib=:
+ fi
+ ;;
+ pass_all)
+ valid_a_lib=:
+ ;;
+ esac
+ if $valid_a_lib; then
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against
the"
+ $ECHO "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ else
+ echo
+ $ECHO "*** Warning: Trying to link with static lib archive
$deplib."
+ echo "*** I have the capability to make that library
automatically link in when"
+ echo "*** you link to this library. But I can only do this if
you have a"
+ echo "*** shared version of the library, which you do not
appear to have"
+ echo "*** because the file extensions .$libext of this argument
makes me believe"
+ echo "*** that it is just a static archive that I should not
use here."
+ fi
+ ;;
+ esac
+ continue
+ ;;
+ prog)
+ if test link != "$pass"; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ continue
+ ;;
+ esac # linkmode
+ ;; # *.$libext
+ *.lo | *.$objext)
+ if test conv = "$pass"; then
+ deplibs="$deplib $deplibs"
+ elif test prog = "$linkmode"; then
+ if test dlpreopen = "$pass" || test yes != "$dlopen_support" ||
test no = "$build_libtool_libs"; then
+ # If there is no dlopen support or we're linking statically,
+ # we need to preload.
+ func_append newdlprefiles " $deplib"
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ func_append newdlfiles " $deplib"
+ fi
+ fi
+ continue
+ ;;
+ %DEPLIBS%)
+ alldeplibs=:
+ continue
+ ;;
+ esac # case $deplib
+
+ $found || test -f "$lib" \
+ || func_fatal_error "cannot find the library '$lib' or unhandled
argument '$deplib'"
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$lib" \
+ || func_fatal_error "'$lib' is not a valid libtool archive"
+
+ func_dirname "$lib" "" "."
+ ladir=$func_dirname_result
+
+ dlname=
+ dlopen=
+ dlpreopen=
+ libdir=
+ library_names=
+ old_library=
+ inherited_linker_flags=
+ # If the library was installed with an old release of libtool,
+ # it will not redefine variables installed, or shouldnotlink
+ installed=yes
+ shouldnotlink=no
+ avoidtemprpath=
+
+
+ # Read the .la file
+ func_source "$lib"
+
+ # Convert "-framework foo" to "foo.ltframework"
+ if test -n "$inherited_linker_flags"; then
+ tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED
's/-framework \([^ $]*\)/\1.ltframework/g'`
+ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+ case " $new_inherited_linker_flags " in
+ *" $tmp_inherited_linker_flag "*) ;;
+ *) func_append new_inherited_linker_flags "
$tmp_inherited_linker_flag";;
+ esac
+ done
+ fi
+ dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^
$]*\).ltframework% -framework \1%g'`
+ if test lib,link = "$linkmode,$pass" ||
+ test prog,scan = "$linkmode,$pass" ||
+ { test prog != "$linkmode" && test lib != "$linkmode"; }; then
+ test -n "$dlopen" && func_append dlfiles " $dlopen"
+ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+ fi
+
+ if test conv = "$pass"; then
+ # Only check for convenience libraries
+ deplibs="$lib $deplibs"
+ if test -z "$libdir"; then
+ if test -z "$old_library"; then
+ func_fatal_error "cannot find name of link library for '$lib'"
+ fi
+ # It is a libtool convenience library, so add in its objects.
+ func_append convenience " $ladir/$objdir/$old_library"
+ func_append old_convenience " $ladir/$objdir/$old_library"
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+ if $opt_preserve_dup_deps; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done
+ elif test prog != "$linkmode" && test lib != "$linkmode"; then
+ func_fatal_error "'$lib' is not a convenience library"
+ fi
+ continue
+ fi # $pass = conv
+
+
+ # Get the name of the library we link against.
+ linklib=
+ if test -n "$old_library" &&
+ { test yes = "$prefer_static_libs" ||
+ test built,no = "$prefer_static_libs,$installed"; }; then
+ linklib=$old_library
+ else
+ for l in $old_library $library_names; do
+ linklib=$l
+ done
+ fi
+ if test -z "$linklib"; then
+ func_fatal_error "cannot find name of link library for '$lib'"
+ fi
+
+ # This library was specified with -dlopen.
+ if test dlopen = "$pass"; then
+ test -z "$libdir" \
+ && func_fatal_error "cannot -dlopen a convenience library: '$lib'"
+ if test -z "$dlname" ||
+ test yes != "$dlopen_support" ||
+ test no = "$build_libtool_libs"
+ then
+ # If there is no dlname, no dlopen support or we're linking
+ # statically, we need to preload. We also need to preload any
+ # dependent libraries so libltdl's deplib preloader doesn't
+ # bomb out in the load deplibs phase.
+ func_append dlprefiles " $lib $dependency_libs"
+ else
+ func_append newdlfiles " $lib"
+ fi
+ continue
+ fi # $pass = dlopen
+
+ # We need an absolute path.
+ case $ladir in
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;;
+ *)
+ abs_ladir=`cd "$ladir" && pwd`
+ if test -z "$abs_ladir"; then
+ func_warning "cannot determine absolute directory name of '$ladir'"
+ func_warning "passing it literally to the linker, although it might
fail"
+ abs_ladir=$ladir
+ fi
+ ;;
+ esac
+ func_basename "$lib"
+ laname=$func_basename_result
+
+ # Find the relevant object directory and library name.
+ if test yes = "$installed"; then
+ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f
"$abs_ladir/$linklib"; then
+ func_warning "library '$lib' was moved."
+ dir=$ladir
+ absdir=$abs_ladir
+ libdir=$abs_ladir
+ else
+ dir=$lt_sysroot$libdir
+ absdir=$lt_sysroot$libdir
+ fi
+ test yes = "$hardcode_automatic" && avoidtemprpath=yes
+ else
+ if test ! -f "$ladir/$objdir/$linklib" && test -f
"$abs_ladir/$linklib"; then
+ dir=$ladir
+ absdir=$abs_ladir
+ # Remove this search path later
+ func_append notinst_path " $abs_ladir"
+ else
+ dir=$ladir/$objdir
+ absdir=$abs_ladir/$objdir
+ # Remove this search path later
+ func_append notinst_path " $abs_ladir"
+ fi
+ fi # $installed = yes
+ func_stripname 'lib' '.la' "$laname"
+ name=$func_stripname_result
+
+ # This library was specified with -dlpreopen.
+ if test dlpreopen = "$pass"; then
+ if test -z "$libdir" && test prog = "$linkmode"; then
+ func_fatal_error "only libraries may -dlpreopen a convenience
library: '$lib'"
+ fi
+ case $host in
+ # special handling for platforms with PE-DLLs.
+ *cygwin* | *mingw* | *cegcc* )
+ # Linker will automatically link against shared library if both
+ # static and shared are present. Therefore, ensure we extract
+ # symbols from the import library if a shared library is present
+ # (otherwise, the dlopen module name will be incorrect). We do
+ # this by putting the import library name into $newdlprefiles.
+ # We recover the dlopen module name by 'saving' the la file
+ # name in a special purpose variable, and (later) extracting the
+ # dlname from the la file.
+ if test -n "$dlname"; then
+ func_tr_sh "$dir/$linklib"
+ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+ func_append newdlprefiles " $dir/$linklib"
+ else
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ fi
+ ;;
+ * )
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ func_append newdlprefiles " $dir/$dlname"
+ else
+ func_append newdlprefiles " $dir/$linklib"
+ fi
+ ;;
+ esac
+ fi # $pass = dlpreopen
+
+ if test -z "$libdir"; then
+ # Link the convenience library
+ if test lib = "$linkmode"; then
+ deplibs="$dir/$old_library $deplibs"
+ elif test prog,link = "$linkmode,$pass"; then
+ compile_deplibs="$dir/$old_library $compile_deplibs"
+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
+ else
+ deplibs="$lib $deplibs" # used for prog,scan pass
+ fi
+ continue
+ fi
+
+
+ if test prog = "$linkmode" && test link != "$pass"; then
+ func_append newlib_search_path " $ladir"
+ deplibs="$lib $deplibs"
+
+ linkalldeplibs=false
+ if test no != "$link_all_deplibs" || test -z "$library_names" ||
+ test no = "$build_libtool_libs"; then
+ linkalldeplibs=:
+ fi
+
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ esac
+ # Need to link against all dependency_libs?
+ if $linkalldeplibs; then
+ deplibs="$deplib $deplibs"
+ else
+ # Need to hardcode shared library paths
+ # or/and link against static libraries
+ newdependency_libs="$deplib $newdependency_libs"
+ fi
+ if $opt_preserve_dup_deps; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done # for deplib
+ continue
+ fi # $linkmode = prog...
+
+ if test prog,link = "$linkmode,$pass"; then
+ if test -n "$library_names" &&
+ { { test no = "$prefer_static_libs" ||
+ test built,yes = "$prefer_static_libs,$installed"; } ||
+ test -z "$old_library"; }; then
+ # We need to hardcode the library path
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
+ # Make sure the rpath contains only unique directories.
+ case $temp_rpath: in
+ *"$absdir:"*) ;;
+ *) func_append temp_rpath "$absdir:" ;;
+ esac
+ fi
+
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+ fi # $linkmode,$pass = prog,link...
+
+ if $alldeplibs &&
+ { test pass_all = "$deplibs_check_method" ||
+ { test yes = "$build_libtool_libs" &&
+ test -n "$library_names"; }; }; then
+ # We only need to search for static libraries
+ continue
+ fi
+ fi
+
+ link_static=no # Whether the deplib will be linked statically
+ use_static_libs=$prefer_static_libs
+ if test built = "$use_static_libs" && test yes = "$installed"; then
+ use_static_libs=no
+ fi
+ if test -n "$library_names" &&
+ { test no = "$use_static_libs" || test -z "$old_library"; }; then
+ case $host in
+ *cygwin* | *mingw* | *cegcc* | *os2*)
+ # No point in relinking DLLs because paths are not encoded
+ func_append notinst_deplibs " $lib"
+ need_relink=no
+ ;;
+ *)
+ if test no = "$installed"; then
+ func_append notinst_deplibs " $lib"
+ need_relink=yes
+ fi
+ ;;
+ esac
+ # This is a shared library
+
+ # Warn about portability, can't link against -module's on some
+ # systems (darwin). Don't bleat about dlopened modules though!
+ dlopenmodule=
+ for dlpremoduletest in $dlprefiles; do
+ if test "X$dlpremoduletest" = "X$lib"; then
+ dlopenmodule=$dlpremoduletest
+ break
+ fi
+ done
+ if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test
link = "$pass"; then
+ echo
+ if test prog = "$linkmode"; then
+ $ECHO "*** Warning: Linking the executable $output against the
loadable module"
+ else
+ $ECHO "*** Warning: Linking the shared library $output against
the loadable module"
+ fi
+ $ECHO "*** $linklib is not portable!"
+ fi
+ if test lib = "$linkmode" &&
+ test yes = "$hardcode_into_libs"; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+ fi
+
+ if test -n "$old_archive_from_expsyms_cmds"; then
+ # figure out the soname
+ set dummy $library_names
+ shift
+ realname=$1
+ shift
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ # use dlname if we got it. it's perfectly good, no?
+ if test -n "$dlname"; then
+ soname=$dlname
+ elif test -n "$soname_spec"; then
+ # bleh windows
+ case $host in
+ *cygwin* | mingw* | *cegcc* | *os2*)
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix=-$major
+ ;;
+ esac
+ eval soname=\"$soname_spec\"
+ else
+ soname=$realname
+ fi
+
+ # Make a new name for the extract_expsyms_cmds to use
+ soroot=$soname
+ func_basename "$soroot"
+ soname=$func_basename_result
+ func_stripname 'lib' '.dll' "$soname"
+ newlib=libimp-$func_stripname_result.a
+
+ # If the library has no export list, then create one now
+ if test -f "$output_objdir/$soname-def"; then :
+ else
+ func_verbose "extracting exported symbol list from '$soname'"
+ func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+ fi
+
+ # Create $newlib
+ if test -f "$output_objdir/$newlib"; then :; else
+ func_verbose "generating import library for '$soname'"
+ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+ fi
+ # make sure the library variables are pointing to the new library
+ dir=$output_objdir
+ linklib=$newlib
+ fi # test -n "$old_archive_from_expsyms_cmds"
+
+ if test prog = "$linkmode" || test relink != "$opt_mode"; then
+ add_shlibpath=
+ add_dir=
+ add=
+ lib_linked=yes
+ case $hardcode_action in
+ immediate | unsupported)
+ if test no = "$hardcode_direct"; then
+ add=$dir/$linklib
+ case $host in
+ *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;;
+ *-*-sysv4*uw2*) add_dir=-L$dir ;;
+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+ *-*-unixware7*) add_dir=-L$dir ;;
+ *-*-darwin* )
+ # if the lib is a (non-dlopened) module then we cannot
+ # link against it, someone is ignoring the earlier warnings
+ if /usr/bin/file -L $add 2> /dev/null |
+ $GREP ": [^:]* bundle" >/dev/null; then
+ if test "X$dlopenmodule" != "X$lib"; then
+ $ECHO "*** Warning: lib $linklib is a module, not a
shared library"
+ if test -z "$old_library"; then
+ echo
+ echo "*** And there doesn't seem to be a static
archive available"
+ echo "*** The link will probably fail, sorry"
+ else
+ add=$dir/$old_library
+ fi
+ elif test -n "$old_library"; then
+ add=$dir/$old_library
+ fi
+ fi
+ esac
+ elif test no = "$hardcode_minus_L"; then
+ case $host in
+ *-*-sunos*) add_shlibpath=$dir ;;
+ esac
+ add_dir=-L$dir
+ add=-l$name
+ elif test no = "$hardcode_shlibpath_var"; then
+ add_shlibpath=$dir
+ add=-l$name
+ else
+ lib_linked=no
+ fi
+ ;;
+ relink)
+ if test yes = "$hardcode_direct" &&
+ test no = "$hardcode_direct_absolute"; then
+ add=$dir/$linklib
+ elif test yes = "$hardcode_minus_L"; then
+ add_dir=-L$absdir
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add=-l$name
+ elif test yes = "$hardcode_shlibpath_var"; then
+ add_shlibpath=$dir
+ add=-l$name
+ else
+ lib_linked=no
+ fi
+ ;;
+ *) lib_linked=no ;;
+ esac
+
+ if test yes != "$lib_linked"; then
+ func_fatal_configuration "unsupported hardcode properties"
+ fi
+
+ if test -n "$add_shlibpath"; then
+ case :$compile_shlibpath: in
+ *":$add_shlibpath:"*) ;;
+ *) func_append compile_shlibpath "$add_shlibpath:" ;;
+ esac
+ fi
+ if test prog = "$linkmode"; then
+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ if test yes != "$hardcode_direct" &&
+ test yes != "$hardcode_minus_L" &&
+ test yes = "$hardcode_shlibpath_var"; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ fi
+ fi
+ fi
+
+ if test prog = "$linkmode" || test relink = "$opt_mode"; then
+ add_shlibpath=
+ add_dir=
+ add=
+ # Finalize command for both is simple: just hardcode it.
+ if test yes = "$hardcode_direct" &&
+ test no = "$hardcode_direct_absolute"; then
+ add=$libdir/$linklib
+ elif test yes = "$hardcode_minus_L"; then
+ add_dir=-L$libdir
+ add=-l$name
+ elif test yes = "$hardcode_shlibpath_var"; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ add=-l$name
+ elif test yes = "$hardcode_automatic"; then
+ if test -n "$inst_prefix_dir" &&
+ test -f "$inst_prefix_dir$libdir/$linklib"; then
+ add=$inst_prefix_dir$libdir/$linklib
+ else
+ add=$libdir/$linklib
+ fi
+ else
+ # We cannot seem to hardcode it, guess we'll fake it.
+ add_dir=-L$libdir
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add=-l$name
+ fi
+
+ if test prog = "$linkmode"; then
+ test -n "$add_dir" && finalize_deplibs="$add_dir
$finalize_deplibs"
+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ fi
+ fi
+ elif test prog = "$linkmode"; then
+ # Here we assume that one of hardcode_direct or hardcode_minus_L
+ # is not unsupported. This is valid on all known static and
+ # shared platforms.
+ if test unsupported != "$hardcode_direct"; then
+ test -n "$old_library" && linklib=$old_library
+ compile_deplibs="$dir/$linklib $compile_deplibs"
+ finalize_deplibs="$dir/$linklib $finalize_deplibs"
+ else
+ compile_deplibs="-l$name -L$dir $compile_deplibs"
+ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+ fi
+ elif test yes = "$build_libtool_libs"; then
+ # Not a shared library
+ if test pass_all != "$deplibs_check_method"; then
+ # We're trying link a shared library against a static one
+ # but the system doesn't support it.
+
+ # Just print a warning and add the library to dependency_libs so
+ # that the program can be linked against the static library.
+ echo
+ $ECHO "*** Warning: This system cannot link to static lib archive
$lib."
+ echo "*** I have the capability to make that library automatically
link in when"
+ echo "*** you link to this library. But I can only do this if you
have a"
+ echo "*** shared version of the library, which you do not appear to
have."
+ if test yes = "$module"; then
+ echo "*** But as you try to build a module library, libtool will
still create "
+ echo "*** a static module, that should work as long as the
dlopening application"
+ echo "*** is linked with the -dlopen flag to resolve symbols at
runtime."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to
extract symbol"
+ echo "*** lists from a program, using 'nm' or equivalent, but
libtool could"
+ echo "*** not find such a program. So, this module is probably
useless."
+ echo "*** 'nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test no = "$build_old_libs"; then
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ else
+ deplibs="$dir/$old_library $deplibs"
+ link_static=yes
+ fi
+ fi # link shared/static library?
+
+ if test lib = "$linkmode"; then
+ if test -n "$dependency_libs" &&
+ { test yes != "$hardcode_into_libs" ||
+ test yes = "$build_old_libs" ||
+ test yes = "$link_static"; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+ for libdir in $dependency_libs; do
+ case $libdir in
+ -R*) func_stripname '-R' '' "$libdir"
+ temp_xrpath=$func_stripname_result
+ case " $xrpath " in
+ *" $temp_xrpath "*) ;;
+ *) func_append xrpath " $temp_xrpath";;
+ esac;;
+ *) func_append temp_deplibs " $libdir";;
+ esac
+ done
+ dependency_libs=$temp_deplibs
+ fi
+
+ func_append newlib_search_path " $absdir"
+ # Link against this library
+ test no = "$link_static" && newdependency_libs="$abs_ladir/$laname
$newdependency_libs"
+ # ... and its dependency_libs
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ newdependency_libs="$deplib $newdependency_libs"
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result";;
+ *) func_resolve_sysroot "$deplib" ;;
+ esac
+ if $opt_preserve_dup_deps; then
+ case "$tmp_libs " in
+ *" $func_resolve_sysroot_result "*)
+ func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+ esac
+ fi
+ func_append tmp_libs " $func_resolve_sysroot_result"
+ done
+
+ if test no != "$link_all_deplibs"; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
+ path=
+ case $deplib in
+ -L*) path=$deplib ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ deplib=$func_resolve_sysroot_result
+ func_dirname "$deplib" "" "."
+ dir=$func_dirname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ func_warning "cannot determine absolute directory name of
'$dir'"
+ absdir=$dir
+ fi
+ ;;
+ esac
+ if $GREP "^installed=no" $deplib > /dev/null; then
+ case $host in
+ *-*-darwin*)
+ depdepl=
+ eval deplibrary_names=`$SED -n -e
's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names"; then
+ for tmp in $deplibrary_names; do
+ depdepl=$tmp
+ done
+ if test -f "$absdir/$objdir/$depdepl"; then
+ depdepl=$absdir/$objdir/$depdepl
+ darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR ==
2) {print $1;exit}}'`
+ if test -z "$darwin_install_name"; then
+ darwin_install_name=`$OTOOL64 -L $depdepl | awk
'{if (NR == 2) {print $1;exit}}'`
+ fi
+ func_append compiler_flags " $wl-dylib_file
$wl$darwin_install_name:$depdepl"
+ func_append linker_flags " -dylib_file
$darwin_install_name:$depdepl"
+ path=
+ fi
+ fi
+ ;;
+ *)
+ path=-L$absdir/$objdir
+ ;;
+ esac
+ else
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ test -z "$libdir" && \
+ func_fatal_error "'$deplib' is not a valid libtool archive"
+ test "$absdir" != "$libdir" && \
+ func_warning "'$deplib' seems to be moved"
+
+ path=-L$absdir
+ fi
+ ;;
+ esac
+ case " $deplibs " in
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
+ esac
+ done
+ fi # link_all_deplibs != no
+ fi # linkmode = lib
+ done # for deplib in $libs
+ if test link = "$pass"; then
+ if test prog = "$linkmode"; then
+ compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+ else
+ compiler_flags="$compiler_flags "`$ECHO "
$new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework
\1%g'`
+ fi
+ fi
+ dependency_libs=$newdependency_libs
+ if test dlpreopen = "$pass"; then
+ # Link the dlpreopened libraries before other libraries
+ for deplib in $save_deplibs; do
+ deplibs="$deplib $deplibs"
+ done
+ fi
+ if test dlopen != "$pass"; then
+ test conv = "$pass" || {
+ # Make sure lib_search_path contains only unique directories.
+ lib_search_path=
+ for dir in $newlib_search_path; do
+ case "$lib_search_path " in
+ *" $dir "*) ;;
+ *) func_append lib_search_path " $dir" ;;
+ esac
+ done
+ newlib_search_path=
+ }
+
+ if test prog,link = "$linkmode,$pass"; then
+ vars="compile_deplibs finalize_deplibs"
+ else
+ vars=deplibs
+ fi
+ for var in $vars dependency_libs; do
+ # Add libraries to $var in reverse order
+ eval tmp_libs=\"\$$var\"
+ new_libs=
+ for deplib in $tmp_libs; do
+ # FIXME: Pedantically, this is the right thing to do, so
+ # that some nasty dependency loop isn't accidentally
+ # broken:
+ #new_libs="$deplib $new_libs"
+ # Pragmatically, this seems to cause very few problems in
+ # practice:
+ case $deplib in
+ -L*) new_libs="$deplib $new_libs" ;;
+ -R*) ;;
+ *)
+ # And here is the reason: when a library appears more
+ # than once as an explicit dependence of a library, or
+ # is implicitly linked in more than once by the
+ # compiler, it is considered special, and multiple
+ # occurrences thereof are not removed. Compare this
+ # with having the same library being listed as a
+ # dependency of multiple other libraries: in this case,
+ # we know (pedantically, we assume) the library does not
+ # need to be listed more than once, so we keep only the
+ # last copy. This is not always right, but it is rare
+ # enough that we require users that really mean to play
+ # such unportable linking tricks to link the library
+ # using -Wl,-lname, so that libtool does not consider it
+ # for duplicate removal.
+ case " $specialdeplibs " in
+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
+ *)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$deplib $new_libs" ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+ tmp_libs=
+ for deplib in $new_libs; do
+ case $deplib in
+ -L*)
+ case " $tmp_libs " in
+ *" $deplib "*) ;;
+ *) func_append tmp_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append tmp_libs " $deplib" ;;
+ esac
+ done
+ eval $var=\"$tmp_libs\"
+ done # for var
+ fi
+
+ # Add Sun CC postdeps if required:
+ test CXX = "$tagname" && {
+ case $host_os in
+ linux*)
+ case `$CC -V 2>&1 | $SED 5q` in
+ *Sun\ C*) # Sun C++ 5.9
+ func_suncc_cstd_abi
+
+ if test no != "$suncc_use_cstd_abi"; then
+ func_append postdeps ' -library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ func_cc_basename "$CC"
+ case $func_cc_basename_result in
+ CC* | sunCC*)
+ func_suncc_cstd_abi
+
+ if test no != "$suncc_use_cstd_abi"; then
+ func_append postdeps ' -library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ }
+
+ # Last step: remove runtime libs from dependency_libs
+ # (they stay in deplibs)
+ tmp_libs=
+ for i in $dependency_libs; do
+ case " $predeps $postdeps $compiler_lib_search_path " in
+ *" $i "*)
+ i=
+ ;;
+ esac
+ if test -n "$i"; then
+ func_append tmp_libs " $i"
+ fi
+ done
+ dependency_libs=$tmp_libs
+ done # for pass
+ if test prog = "$linkmode"; then
+ dlfiles=$newdlfiles
+ fi
+ if test prog = "$linkmode" || test lib = "$linkmode"; then
+ dlprefiles=$newdlprefiles
+ fi
+
+ case $linkmode in
+ oldlib)
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+ func_warning "'-dlopen' is ignored for archives"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "'-l' and '-L' are ignored for archives" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "'-rpath' is ignored for archives"
+
+ test -n "$xrpath" && \
+ func_warning "'-R' is ignored for archives"
+
+ test -n "$vinfo" && \
+ func_warning "'-version-info/-version-number' is ignored for archives"
+
+ test -n "$release" && \
+ func_warning "'-release' is ignored for archives"
+
+ test -n "$export_symbols$export_symbols_regex" && \
+ func_warning "'-export-symbols' is ignored for archives"
+
+ # Now set the variables for building old libraries.
+ build_libtool_libs=no
+ oldlibs=$output
+ func_append objs "$old_deplibs"
+ ;;
+
+ lib)
+ # Make sure we only generate libraries of the form 'libNAME.la'.
+ case $outputname in
+ lib*)
+ func_stripname 'lib' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ test no = "$module" \
+ && func_fatal_help "libtool library '$output' must begin with 'lib'"
+
+ if test no != "$need_lib_prefix"; then
+ # Add the "lib" prefix for modules if required
+ func_stripname '' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ else
+ func_stripname '' '.la' "$outputname"
+ libname=$func_stripname_result
+ fi
+ ;;
+ esac
+
+ if test -n "$objs"; then
+ if test pass_all != "$deplibs_check_method"; then
+ func_fatal_error "cannot build libtool library '$output' from
non-libtool objects on this host:$objs"
+ else
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the
non-libtool"
+ $ECHO "*** objects $objs is not portable!"
+ func_append libobjs " $objs"
+ fi
+ fi
+
+ test no = "$dlself" \
+ || func_warning "'-dlopen self' is ignored for libtool libraries"
+
+ set dummy $rpath
+ shift
+ test 1 -lt "$#" \
+ && func_warning "ignoring multiple '-rpath's for a libtool library"
+
+ install_libdir=$1
+
+ oldlibs=
+ if test -z "$rpath"; then
+ if test yes = "$build_libtool_libs"; then
+ # Building a libtool convenience library.
+ # Some compilers have problems with a '.al' extension so
+ # convenience libraries should have the same extension an
+ # archive normally would.
+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
+ build_libtool_libs=convenience
+ build_old_libs=yes
+ fi
+
+ test -n "$vinfo" && \
+ func_warning "'-version-info/-version-number' is ignored for
convenience libraries"
+
+ test -n "$release" && \
+ func_warning "'-release' is ignored for convenience libraries"
+ else
+
+ # Parse the version information argument.
+ save_ifs=$IFS; IFS=:
+ set dummy $vinfo 0 0 0
+ shift
+ IFS=$save_ifs
+
+ test -n "$7" && \
+ func_fatal_help "too many parameters to '-version-info'"
+
+ # convert absolute version numbers to libtool ages
+ # this retains compatibility with .la files and attempts
+ # to make the code below a bit more comprehensible
+
+ case $vinfo_number in
+ yes)
+ number_major=$1
+ number_minor=$2
+ number_revision=$3
+ #
+ # There are really only two kinds -- those that
+ # use the current revision as the major version
+ # and those that subtract age and use age as
+ # a minor version. But, then there is irix
+ # that has an extra 1 added just for fun
+ #
+ case $version_type in
+ # correct linux to gnu/linux during the next big refactor
+ darwin|freebsd-elf|linux|midnightbsd-elf|osf|windows|none)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age=$number_minor
+ revision=$number_revision
+ ;;
+ freebsd-aout|qnx|sunos)
+ current=$number_major
+ revision=$number_minor
+ age=0
+ ;;
+ irix|nonstopux)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age=$number_minor
+ revision=$number_minor
+ lt_irix_increment=no
+ ;;
+ *)
+ func_fatal_configuration "$modename: unknown library version type
'$version_type'"
+ ;;
+ esac
+ ;;
+ no)
+ current=$1
+ revision=$2
+ age=$3
+ ;;
+ esac
+
+ # Check that each of the things are valid numbers.
+ case $current in
+
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9])
;;
+ *)
+ func_error "CURRENT '$current' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $revision in
+
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9])
;;
+ *)
+ func_error "REVISION '$revision' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $age in
+
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9])
;;
+ *)
+ func_error "AGE '$age' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
+ ;;
+ esac
+
+ if test "$age" -gt "$current"; then
+ func_error "AGE '$age' is greater than the current interface number
'$current'"
+ func_fatal_error "'$vinfo' is not valid version information"
+ fi
+
+ # Calculate the version variables.
+ major=
+ versuffix=
+ verstring=
+ case $version_type in
+ none) ;;
+
+ darwin)
+ # Like Linux, but with the current version available in
+ # verstring for coding it into the library header
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=$major.$age.$revision
+ # Darwin ld doesn't like 0 for these options...
+ func_arith $current + 1
+ minor_current=$func_arith_result
+ xlcverstring="$wl-compatibility_version $wl$minor_current
$wl-current_version $wl$minor_current.$revision"
+ verstring="-compatibility_version $minor_current -current_version
$minor_current.$revision"
+ # On Darwin other compilers
+ case $CC in
+ nagfor*)
+ verstring="$wl-compatibility_version $wl$minor_current
$wl-current_version $wl$minor_current.$revision"
+ ;;
+ *)
+ verstring="-compatibility_version $minor_current
-current_version $minor_current.$revision"
+ ;;
+ esac
+ ;;
+
+ freebsd-aout)
+ major=.$current
+ versuffix=.$current.$revision
+ ;;
+
+ freebsd-elf | midnightbsd-elf)
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=$major.$age.$revision
+ ;;
+
+ irix | nonstopux)
+ if test no = "$lt_irix_increment"; then
+ func_arith $current - $age
+ else
+ func_arith $current - $age + 1
+ fi
+ major=$func_arith_result
+
+ case $version_type in
+ nonstopux) verstring_prefix=nonstopux ;;
+ *) verstring_prefix=sgi ;;
+ esac
+ verstring=$verstring_prefix$major.$revision
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$revision
+ while test 0 -ne "$loop"; do
+ func_arith $revision - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring=$verstring_prefix$major.$iface:$verstring
+ done
+
+ # Before this point, $major must not contain '.'.
+ major=.$major
+ versuffix=$major.$revision
+ ;;
+
+ linux) # correct to gnu/linux during the next big refactor
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=$major.$age.$revision
+ ;;
+
+ osf)
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=.$current.$age.$revision
+ verstring=$current.$age.$revision
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$age
+ while test 0 -ne "$loop"; do
+ func_arith $current - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring=$verstring:$iface.0
+ done
+
+ # Make executables depend on our current version.
+ func_append verstring ":$current.0"
+ ;;
+
+ qnx)
+ major=.$current
+ versuffix=.$current
+ ;;
+
+ sco)
+ major=.$current
+ versuffix=.$current
+ ;;
+
+ sunos)
+ major=.$current
+ versuffix=.$current.$revision
+ ;;
+
+ windows)
+ # Use '-' rather than '.', since we only want one
+ # extension on DOS 8.3 file systems.
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix=-$major
+ ;;
+
+ *)
+ func_fatal_configuration "unknown library version type
'$version_type'"
+ ;;
+ esac
+
+ # Clear the version info if we defaulted, and they specified a release.
+ if test -z "$vinfo" && test -n "$release"; then
+ major=
+ case $version_type in
+ darwin)
+ # we can't check for "0.0" in archive_cmds due to quoting
+ # problems, so we reset it completely
+ verstring=
+ ;;
+ *)
+ verstring=0.0
+ ;;
+ esac
+ if test no = "$need_version"; then
+ versuffix=
+ else
+ versuffix=.0.0
+ fi
+ fi
+
+ # Remove version info from name if versioning should be avoided
+ if test yes,no = "$avoid_version,$need_version"; then
+ major=
+ versuffix=
+ verstring=
+ fi
+
+ # Check to see if the archive will have undefined symbols.
+ if test yes = "$allow_undefined"; then
+ if test unsupported = "$allow_undefined_flag"; then
+ if test yes = "$build_old_libs"; then
+ func_warning "undefined symbols not allowed in $host shared
libraries; building static only"
+ build_libtool_libs=no
+ else
+ func_fatal_error "can't build $host shared library unless
-no-undefined is specified"
+ fi
+ fi
+ else
+ # Don't allow undefined symbols.
+ allow_undefined_flag=$no_undefined_flag
+ fi
+
+ fi
+
+ func_generate_dlsyms "$libname" "$libname" :
+ func_append libobjs " $symfileobj"
+ test " " = "$libobjs" && libobjs=
+
+ if test relink != "$opt_mode"; then
+ # Remove our outputs, but don't remove object files since they
+ # may have been created when compiling PIC objects.
+ removelist=
+ tempremovelist=`$ECHO "$output_objdir/*"`
+ for p in $tempremovelist; do
+ case $p in
+ *.$objext | *.gcno)
+ ;;
+ $output_objdir/$outputname | $output_objdir/$libname.* |
$output_objdir/$libname$release.*)
+ if test -n "$precious_files_regex"; then
+ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null
2>&1
+ then
+ continue
+ fi
+ fi
+ func_append removelist " $p"
+ ;;
+ *) ;;
+ esac
+ done
+ test -n "$removelist" && \
+ func_show_eval "${RM}r \$removelist"
+ fi
+
+ # Now set the variables for building old libraries.
+ if test yes = "$build_old_libs" && test convenience !=
"$build_libtool_libs"; then
+ func_append oldlibs " $output_objdir/$libname.$libext"
+
+ # Transform .lo files to .o files.
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d;
$lo2o" | $NL2SP`
+ fi
+
+ # Eliminate all temporary directories.
+ #for path in $notinst_path; do
+ # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path %
%g"`
+ # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+ # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path %
%g"`
+ #done
+
+ if test -n "$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ temp_xrpath=
+ for libdir in $xrpath; do
+ func_replace_sysroot "$libdir"
+ func_append temp_xrpath " -R$func_replace_sysroot_result"
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs";
then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+ fi
+
+ # Make sure dlfiles contains only unique files that won't be dlpreopened
+ old_dlfiles=$dlfiles
+ dlfiles=
+ for lib in $old_dlfiles; do
+ case " $dlprefiles $dlfiles " in
+ *" $lib "*) ;;
+ *) func_append dlfiles " $lib" ;;
+ esac
+ done
+
+ # Make sure dlprefiles contains only unique files
+ old_dlprefiles=$dlprefiles
+ dlprefiles=
+ for lib in $old_dlprefiles; do
+ case "$dlprefiles " in
+ *" $lib "*) ;;
+ *) func_append dlprefiles " $lib" ;;
+ esac
+ done
+
+ if test yes = "$build_libtool_libs"; then
+ if test -n "$rpath"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* |
*-cegcc* | *-*-haiku*)
+ # these systems don't actually have a c library (as such)!
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C library is in the System framework
+ func_append deplibs " System.ltframework"
+ ;;
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-midnightbsd*)
+ # Do not include libc due to us having libc/libc_r.
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ ;;
+ *)
+ # Add libc to deplibs on all other systems if necessary.
+ if test yes = "$build_libtool_need_lc"; then
+ func_append deplibs " -lc"
+ fi
+ ;;
+ esac
+ fi
+
+ # Transform deplibs into only deplibs that can be linked in shared.
+ name_save=$name
+ libname_save=$libname
+ release_save=$release
+ versuffix_save=$versuffix
+ major_save=$major
+ # I'm not sure if I'm treating the release correctly. I think
+ # release should show up in the -l (ie -lgmp5) so we don't want to
+ # add it in twice. Is that correct?
+ release=
+ versuffix=
+ major=
+ newdeplibs=
+ droppeddeps=no
+ case $deplibs_check_method in
+ pass_all)
+ # Don't check for shared/static. Everything works.
+ # This might be a little naive. We might want to check
+ # whether the library exists or not. But this is on
+ # osf3 & osf4 and I'm not really sure... Just
+ # implementing what was already the behavior.
+ newdeplibs=$deplibs
+ ;;
+ test_compile)
+ # This code stresses the "libraries are programs" paradigm to its
+ # limits. Maybe even breaks it. We compile a program, linking it
+ # against the deplibs as a proxy for the library. Then we can check
+ # whether they linked in statically or dynamically with ldd.
+ $opt_dry_run || $RM conftest.c
+ cat > conftest.c <<EOF
+ int main() { return 0; }
+EOF
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+ ldd_output=`ldd conftest`
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ func_append newdeplibs " $i"
+ i=
+ ;;
+ esac
+ fi
+ if test -n "$i"; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
+ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed
library $i."
+ echo "*** I have the capability to make that library
automatically link in when"
+ echo "*** you link to this library. But I can only do this
if you have a"
+ echo "*** shared version of the library, which I believe
you do not have"
+ echo "*** because a test_compile did reveal that the linker
did not use it for"
+ echo "*** its dynamic dependency list that programs get
resolved with at runtime."
+ fi
+ fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+ else
+ # Error occurred in the first compile. Let's try to salvage
+ # the situation: Compile a separate program for each library.
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+ ldd_output=`ldd conftest`
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ func_append newdeplibs " $i"
+ i=
+ ;;
+ esac
+ fi
+ if test -n "$i"; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
+ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed
library $i."
+ echo "*** I have the capability to make that library
automatically link in when"
+ echo "*** you link to this library. But I can only do
this if you have a"
+ echo "*** shared version of the library, which you do not
appear to have"
+ echo "*** because a test_compile did reveal that the
linker did not use this one"
+ echo "*** as a dynamic dependency that programs can get
resolved with at runtime."
+ fi
+ fi
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning! Library $i is needed by this library but
I was not able to"
+ echo "*** make it link in! You will probably need to install
it or some"
+ echo "*** library that it depends on before this library will
be fully"
+ echo "*** functional. Installing it before continuing would
be even better."
+ fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+ fi
+ ;;
+ file_magic*)
+ set dummy $deplibs_check_method; shift
+ file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ func_append newdeplibs " $a_deplib"
+ a_deplib=
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib"; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ if test -n "$file_magic_glob"; then
+ libnameglob=`func_echo_all "$libname" | $SED -e
$file_magic_glob`
+ else
+ libnameglob=$libname
+ fi
+ test yes = "$want_nocaseglob" && nocaseglob=`shopt -p
nocaseglob`
+ for i in $lib_search_path $sys_lib_search_path
$shlib_search_path; do
+ if test yes = "$want_nocaseglob"; then
+ shopt -s nocaseglob
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ $nocaseglob
+ else
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ fi
+ for potent_lib in $potential_libs; do
+ # Follow soft links.
+ if ls -lLd "$potent_lib" 2>/dev/null |
+ $GREP " -> " >/dev/null; then
+ continue
+ fi
+ # The statement above tries to avoid entering an
+ # endless loop below, in case of cyclic links.
+ # We might still enter an endless loop, since a link
+ # loop can be closed while we follow links,
+ # but so what?
+ potlib=$potent_lib
+ while test -h "$potlib" 2>/dev/null; do
+ potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
+ case $potliblink in
+ [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
+ *) potlib=`$ECHO "$potlib" | $SED
's|[^/]*$||'`"$potliblink";;
+ esac
+ done
+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+ $SED -e 10q |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
+ a_deplib=
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib"; then
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: linker path does not have real file for
library $a_deplib."
+ echo "*** I have the capability to make that library
automatically link in when"
+ echo "*** you link to this library. But I can only do this if
you have a"
+ echo "*** shared version of the library, which you do not
appear to have"
+ echo "*** because I did check the linker path looking for a
file starting"
+ if test -z "$potlib"; then
+ $ECHO "*** with $libname but no candidates were found.
(...for file magic test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a
file format test"
+ $ECHO "*** using a file magic. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ func_append newdeplibs " $a_deplib"
+ a_deplib=
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib"; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ for i in $lib_search_path $sys_lib_search_path
$shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ potlib=$potent_lib # see symlink-check above in file_magic
test
+ if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+ $EGREP "$match_pattern_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
+ a_deplib=
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib"; then
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: linker path does not have real file for
library $a_deplib."
+ echo "*** I have the capability to make that library
automatically link in when"
+ echo "*** you link to this library. But I can only do this if
you have a"
+ echo "*** shared version of the library, which you do not
appear to have"
+ echo "*** because I did check the linker path looking for a
file starting"
+ if test -z "$potlib"; then
+ $ECHO "*** with $libname but no candidates were found.
(...for regex pattern test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a
file format test"
+ $ECHO "*** using a regex pattern. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ none | unknown | *)
+ newdeplibs=
+ tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+ for i in $predeps $postdeps; do
+ # can't use Xsed below, because $i might contain '/'
+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
+ done
+ fi
+ case $tmp_deplibs in
+ *[!\ \ ]*)
+ echo
+ if test none = "$deplibs_check_method"; then
+ echo "*** Warning: inter-library dependencies are not supported
in this platform."
+ else
+ echo "*** Warning: inter-library dependencies are not known to be
supported."
+ fi
+ echo "*** All declared inter-library dependencies are being
dropped."
+ droppeddeps=yes
+ ;;
+ esac
+ ;;
+ esac
+ versuffix=$versuffix_save
+ major=$major_save
+ release=$release_save
+ libname=$libname_save
+ name=$name_save
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library with the System framework
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework
/'`
+ ;;
+ esac
+
+ if test yes = "$droppeddeps"; then
+ if test yes = "$module"; then
+ echo
+ echo "*** Warning: libtool could not satisfy all declared
inter-library"
+ $ECHO "*** dependencies of module $libname. Therefore, libtool
will create"
+ echo "*** a static module, that should work as long as the
dlopening"
+ echo "*** application is linked with the -dlopen flag."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to
extract symbol"
+ echo "*** lists from a program, using 'nm' or equivalent, but
libtool could"
+ echo "*** not find such a program. So, this module is probably
useless."
+ echo "*** 'nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test no = "$build_old_libs"; then
+ oldlibs=$output_objdir/$libname.$libext
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ else
+ echo "*** The inter-library dependencies that have been dropped
here will be"
+ echo "*** automatically added whenever a program is linked with
this library"
+ echo "*** or is declared to -dlopen it."
+
+ if test no = "$allow_undefined"; then
+ echo
+ echo "*** Since this library must not contain undefined symbols,"
+ echo "*** because either the platform does not support them or"
+ echo "*** it was explicitly requested with -no-undefined,"
+ echo "*** libtool will only create a static version of it."
+ if test no = "$build_old_libs"; then
+ oldlibs=$output_objdir/$libname.$libext
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ fi
+ fi
+ # Done checking deplibs!
+ deplibs=$newdeplibs
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ case $host in
+ *-*-darwin*)
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework%
-framework \1%g'`
+ new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" |
$SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework%
-framework \1%g'`
+ ;;
+ esac
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $deplibs " in
+ *" -L$path/$objdir "*)
+ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ deplibs=$new_libs
+
+ # All the library-specific variables (install_libdir is set above).
+ library_names=
+ old_library=
+ dlname=
+
+ # Test again, we may have decided not to build it any more
+ if test yes = "$build_libtool_libs"; then
+ # Remove $wl instances when linking with ld.
+ # FIXME: should test the right _cmds variable.
+ case $archive_cmds in
+ *\$LD\ *) wl= ;;
+ esac
+ if test yes = "$hardcode_into_libs"; then
+ # Hardcode the library paths
+ hardcode_libdirs=
+ dep_rpath=
+ rpath=$finalize_rpath
+ test relink = "$opt_mode" || rpath=$compile_rpath$rpath
+ for libdir in $rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ func_replace_sysroot "$libdir"
+ libdir=$func_replace_sysroot_result
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs=$libdir
+ else
+ # Just accumulate the unique libdirs.
+ case
$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs
"$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append dep_rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir=$hardcode_libdirs
+ eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
+ fi
+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+ fi
+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+ fi
+
+ shlibpath=$finalize_shlibpath
+ test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
+ if test -n "$shlibpath"; then
+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export
$shlibpath_var"
+ fi
+
+ # Get the real and link names of the library.
+ eval shared_ext=\"$shrext_cmds\"
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ shift
+ realname=$1
+ shift
+
+ if test -n "$soname_spec"; then
+ eval soname=\"$soname_spec\"
+ else
+ soname=$realname
+ fi
+ if test -z "$dlname"; then
+ dlname=$soname
+ fi
+
+ lib=$output_objdir/$realname
+ linknames=
+ for link
+ do
+ func_append linknames " $link"
+ done
+
+ # Use standard objects if they are pic
+ test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED
"$lo2o" | $NL2SP`
+ test "X$libobjs" = "X " && libobjs=
+
+ delfiles=
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+ export_symbols=$output_objdir/$libname.uexp
+ func_append delfiles " $export_symbols"
+ fi
+
+ orig_export_symbols=
+ case $host_os in
+ cygwin* | mingw* | cegcc*)
+ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+ # exporting using user supplied symfile
+ func_dll_def_p "$export_symbols" || {
+ # and it's NOT already a .def file. Must figure out
+ # which of the given symbols are data symbols and tag
+ # them as such. So, trigger use of export_symbols_cmds.
+ # export_symbols gets reassigned inside the "prepare
+ # the list of exported symbols" if statement, so the
+ # include_expsyms logic still works.
+ orig_export_symbols=$export_symbols
+ export_symbols=
+ always_export_symbols=yes
+ }
+ fi
+ ;;
+ esac
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ if test yes = "$always_export_symbols" || test -n
"$export_symbols_regex"; then
+ func_verbose "generating symbol list for '$libname.la'"
+ export_symbols=$output_objdir/$libname.exp
+ $opt_dry_run || $RM $export_symbols
+ cmds=$export_symbols_cmds
+ save_ifs=$IFS; IFS='~'
+ for cmd1 in $cmds; do
+ IFS=$save_ifs
+ # Take the normal branch if the nm_file_list_spec branch
+ # doesn't work or if tool conversion is not needed.
+ case $nm_file_list_spec~$to_tool_file_cmd in
+ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+ try_normal_branch=yes
+ eval cmd=\"$cmd1\"
+ func_len " $cmd"
+ len=$func_len_result
+ ;;
+ *)
+ try_normal_branch=no
+ ;;
+ esac
+ if test yes = "$try_normal_branch" \
+ && { test "$len" -lt "$max_cmd_len" \
+ || test "$max_cmd_len" -le -1; }
+ then
+ func_show_eval "$cmd" 'exit $?'
+ skipped_export=false
+ elif test -n "$nm_file_list_spec"; then
+ func_basename "$output"
+ output_la=$func_basename_result
+ save_libobjs=$libobjs
+ save_output=$output
+ output=$output_objdir/$output_la.nm
+ func_to_tool_file "$output"
+ libobjs=$nm_file_list_spec$func_to_tool_file_result
+ func_append delfiles " $output"
+ func_verbose "creating $NM input file list: $output"
+ for obj in $save_libobjs; do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > "$output"
+ eval cmd=\"$cmd1\"
+ func_show_eval "$cmd" 'exit $?'
+ output=$save_output
+ libobjs=$save_libobjs
+ skipped_export=false
+ else
+ # The command line is too long to execute in one step.
+ func_verbose "using reloadable object file for export list..."
+ skipped_export=:
+ # Break out early, otherwise skipped_export may be
+ # set to false by a later but shorter cmd.
+ break
+ fi
+ done
+ IFS=$save_ifs
+ if test -n "$export_symbols_regex" && test : != "$skipped_export";
then
+ func_show_eval '$EGREP -e "$export_symbols_regex"
"$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+ fi
+
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols=$export_symbols
+ test -n "$orig_export_symbols" &&
tmp_export_symbols=$orig_export_symbols
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >>
"$tmp_export_symbols"'
+ fi
+
+ if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for '$libname.la' to tag DATA
exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands, which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([
\,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter <
$orig_export_symbols > $export_symbols
+ fi
+
+ tmp_deplibs=
+ for test_deplib in $deplibs; do
+ case " $convenience " in
+ *" $test_deplib "*) ;;
+ *)
+ func_append tmp_deplibs " $test_deplib"
+ ;;
+ esac
+ done
+ deplibs=$tmp_deplibs
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec" &&
+ test yes = "$compiler_needs_object" &&
+ test -z "$libobjs"; then
+ # extract the archives, so we have objects to list.
+ # TODO: could optimize this to just extract one archive.
+ whole_archive_flag_spec=
+ fi
+ if test -n "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ else
+ gentop=$output_objdir/${outputname}x
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ fi
+
+ if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
+ eval flag=\"$thread_safe_flag_spec\"
+ func_append linker_flags " $flag"
+ fi
+
+ # Make a backup of the uninstalled library when relinking
+ if test relink = "$opt_mode"; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV
$realname ${realname}U)' || exit $?
+ fi
+
+ # Do each of the archive commands.
+ if test yes = "$module" && test -n "$module_cmds"; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ eval test_cmds=\"$module_expsym_cmds\"
+ cmds=$module_expsym_cmds
+ else
+ eval test_cmds=\"$module_cmds\"
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ eval test_cmds=\"$archive_expsym_cmds\"
+ cmds=$archive_expsym_cmds
+ else
+ eval test_cmds=\"$archive_cmds\"
+ cmds=$archive_cmds
+ fi
+ fi
+
+ if test : != "$skipped_export" &&
+ func_len " $test_cmds" &&
+ len=$func_len_result &&
+ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ :
+ else
+ # The command line is too long to link in one step, link piecewise
+ # or, if using GNU ld and skipped_export is not :, use a linker
+ # script.
+
+ # Save the value of $output and $libobjs because we want to
+ # use them later. If we have whole_archive_flag_spec, we
+ # want to use save_libobjs as it was before
+ # whole_archive_flag_spec was expanded, because we can't
+ # assume the linker understands whole_archive_flag_spec.
+ # This may have to be revisited, in case too many
+ # convenience libraries get linked in and end up exceeding
+ # the spec.
+ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ fi
+ save_output=$output
+ func_basename "$output"
+ output_la=$func_basename_result
+
+ # Clear the reloadable object creation command queue and
+ # initialize k to one.
+ test_cmds=
+ concat_cmds=
+ objlist=
+ last_robj=
+ k=1
+
+ if test -n "$save_libobjs" && test : != "$skipped_export" && test yes
= "$with_gnu_ld"; then
+ output=$output_objdir/$output_la.lnkscript
+ func_verbose "creating GNU ld script: $output"
+ echo 'INPUT (' > $output
+ for obj in $save_libobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ echo ')' >> $output
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$func_to_tool_file_result
+ elif test -n "$save_libobjs" && test : != "$skipped_export" && test
-n "$file_list_spec"; then
+ output=$output_objdir/$output_la.lnk
+ func_verbose "creating linker input file list: $output"
+ : > $output
+ set x $save_libobjs
+ shift
+ firstobj=
+ if test yes = "$compiler_needs_object"; then
+ firstobj="$1 "
+ shift
+ fi
+ for obj
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+ else
+ if test -n "$save_libobjs"; then
+ func_verbose "creating reloadable object files..."
+ output=$output_objdir/$output_la-$k.$objext
+ eval test_cmds=\"$reload_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+
+ # Loop over the list of objects to be linked.
+ for obj in $save_libobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ if test -z "$objlist" ||
+ test "$len" -lt "$max_cmd_len"; then
+ func_append objlist " $obj"
+ else
+ # The command $test_cmds is almost too long, add a
+ # command to the queue.
+ if test 1 -eq "$k"; then
+ # The first file doesn't have a previous command to add.
+ reload_objs=$objlist
+ eval concat_cmds=\"$reload_cmds\"
+ else
+ # All subsequent reloadable object files will link in
+ # the last one created.
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM
$last_robj\"
+ fi
+ last_robj=$output_objdir/$output_la-$k.$objext
+ func_arith $k + 1
+ k=$func_arith_result
+ output=$output_objdir/$output_la-$k.$objext
+ objlist=" $obj"
+ func_len " $last_robj"
+ func_arith $len0 + $func_len_result
+ len=$func_arith_result
+ fi
+ done
+ # Handle the remaining objects by creating one last
+ # reloadable object file. All subsequent reloadable object
+ # files will link in the last one created.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\$concat_cmds$reload_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+ fi
+ func_append delfiles " $output"
+
+ else
+ output=
+ fi
+
+ ${skipped_export-false} && {
+ func_verbose "generating symbol list for '$libname.la'"
+ export_symbols=$output_objdir/$libname.exp
+ $opt_dry_run || $RM $export_symbols
+ libobjs=$output
+ # Append the command to create the export file.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+ fi
+ }
+
+ test -n "$save_libobjs" &&
+ func_verbose "creating a temporary reloadable object file:
$output"
+
+ # Loop through the commands generated above and execute them.
+ save_ifs=$IFS; IFS='~'
+ for cmd in $concat_cmds; do
+ IFS=$save_ifs
+ $opt_quiet || {
+ func_quote_arg expand,pretty "$cmd"
+ eval "func_echo $func_quote_arg_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test relink = "$opt_mode"; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS=$save_ifs
+
+ if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+ func_show_eval '$EGREP -e "$export_symbols_regex"
"$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+
+ ${skipped_export-false} && {
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols=$export_symbols
+ test -n "$orig_export_symbols" &&
tmp_export_symbols=$orig_export_symbols
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >>
"$tmp_export_symbols"'
+ fi
+
+ if test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for '$libname.la' to tag DATA
exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots
of
+ # 's' commands, which not all seds can handle. GNU sed should be
fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([
\,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols
$output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter <
$orig_export_symbols > $export_symbols
+ fi
+ }
+
+ libobjs=$output
+ # Restore the value of output.
+ output=$save_output
+
+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ # Expand the library linking commands again to reset the
+ # value of $libobjs for piecewise linking.
+
+ # Do each of the archive commands.
+ if test yes = "$module" && test -n "$module_cmds"; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ cmds=$module_expsym_cmds
+ else
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ cmds=$archive_expsym_cmds
+ else
+ cmds=$archive_cmds
+ fi
+ fi
+ fi
+
+ if test -n "$delfiles"; then
+ # Append the command to remove temporary files to $cmds.
+ eval cmds=\"\$cmds~\$RM $delfiles\"
+ fi
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop=$output_objdir/${outputname}x
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+
+ save_ifs=$IFS; IFS='~'
+ for cmd in $cmds; do
+ IFS=$sp$nl
+ eval cmd=\"$cmd\"
+ IFS=$save_ifs
+ $opt_quiet || {
+ func_quote_arg expand,pretty "$cmd"
+ eval "func_echo $func_quote_arg_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test relink = "$opt_mode"; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS=$save_ifs
+
+ # Restore the uninstalled library and exit
+ if test relink = "$opt_mode"; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV
$realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+ if test -n "$convenience"; then
+ if test -z "$whole_archive_flag_spec"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ # Create links to the real library.
+ for linkname in $linknames; do
+ if test "$realname" != "$linkname"; then
+ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S
"$realname" "$linkname")' 'exit $?'
+ fi
+ done
+
+ # If -module or -export-dynamic was specified, set the dlname.
+ if test yes = "$module" || test yes = "$export_dynamic"; then
+ # On all known operating systems, these are identical.
+ dlname=$soname
+ fi
+ fi
+ ;;
+
+ obj)
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+ func_warning "'-dlopen' is ignored for objects"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "'-l' and '-L' are ignored for objects" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "'-rpath' is ignored for objects"
+
+ test -n "$xrpath" && \
+ func_warning "'-R' is ignored for objects"
+
+ test -n "$vinfo" && \
+ func_warning "'-version-info' is ignored for objects"
+
+ test -n "$release" && \
+ func_warning "'-release' is ignored for objects"
+
+ case $output in
+ *.lo)
+ test -n "$objs$old_deplibs" && \
+ func_fatal_error "cannot build library object '$output' from
non-libtool objects"
+
+ libobj=$output
+ func_lo2o "$libobj"
+ obj=$func_lo2o_result
+ ;;
+ *)
+ libobj=
+ obj=$output
+ ;;
+ esac
+
+ # Delete the old objects.
+ $opt_dry_run || $RM $obj $libobj
+
+ # Objects from convenience libraries. This assumes
+ # single-version convenience libraries. Whenever we create
+ # different ones for PIC/non-PIC, this we'll have to duplicate
+ # the extraction.
+ reload_conv_objs=
+ gentop=
+ # if reload_cmds runs $LD directly, get rid of -Wl from
+ # whole_archive_flag_spec and hope we can get by with turning comma
+ # into space.
+ case $reload_cmds in
+ *\$LD[\ \$]*) wl= ;;
+ esac
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+ test -n "$wl" || tmp_whole_archive_flags=`$ECHO
"$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
+ else
+ gentop=$output_objdir/${obj}x
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ reload_conv_objs="$reload_objs $func_extract_archives_result"
+ fi
+ fi
+
+ # If we're not building shared, we need to use non_pic_objs
+ test yes = "$build_libtool_libs" || libobjs=$non_pic_objects
+
+ # Create the old-style object.
+ reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED
"/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
+
+ output=$obj
+ func_execute_cmds "$reload_cmds" 'exit $?'
+
+ # Exit if we aren't doing a library object file.
+ if test -z "$libobj"; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ test yes = "$build_libtool_libs" || {
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ # Create an invalid libtool object if no PIC, so that we don't
+ # accidentally link it into a program.
+ # $show "echo timestamp > $libobj"
+ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+ exit $EXIT_SUCCESS
+ }
+
+ if test -n "$pic_flag" || test default != "$pic_mode"; then
+ # Only do commands if we really have different PIC objects.
+ reload_objs="$libobjs $reload_conv_objs"
+ output=$libobj
+ func_execute_cmds "$reload_cmds" 'exit $?'
+ fi
+
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ ;;
+
+ prog)
+ case $host in
+ *cygwin*) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result.exe;;
+ esac
+ test -n "$vinfo" && \
+ func_warning "'-version-info' is ignored for programs"
+
+ test -n "$release" && \
+ func_warning "'-release' is ignored for programs"
+
+ $preload \
+ && test unknown,unknown,unknown =
"$dlopen_support,$dlopen_self,$dlopen_self_static" \
+ && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen
support."
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc /
System.ltframework /'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc /
System.ltframework /'`
+ ;;
+ esac
+
+ case $host in
+ *-*-darwin*)
+ # Don't allow lazy linking, it breaks C++ global constructors
+ # But is supposedly fixed on 10.4 or later (yay!).
+ if test CXX = "$tagname"; then
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+ 10.[0123])
+ func_append compile_command " $wl-bind_at_load"
+ func_append finalize_command " $wl-bind_at_load"
+ ;;
+ esac
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework
foo"
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^
$]*\).ltframework% -framework \1%g'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^
$]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $compile_deplibs " in
+ *" -L$path/$objdir "*)
+ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $compile_deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ compile_deplibs=$new_libs
+
+
+ func_append compile_command " $compile_deplibs"
+ func_append finalize_command " $finalize_deplibs"
+
+ if test -n "$rpath$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ for libdir in $rpath $xrpath; do
+ # This is the magic to use -rpath.
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ fi
+
+ # Now hardcode the library paths
+ rpath=
+ hardcode_libdirs=
+ for libdir in $compile_rpath $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs=$libdir
+ else
+ # Just accumulate the unique libdirs.
+ case
$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append perm_rpath " $libdir" ;;
+ esac
+ fi
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$libdir:"*) ;;
+ ::) dllsearchpath=$libdir;;
+ *) func_append dllsearchpath ":$libdir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir=$hardcode_libdirs
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ compile_rpath=$rpath
+
+ rpath=
+ hardcode_libdirs=
+ for libdir in $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs=$libdir
+ else
+ # Just accumulate the unique libdirs.
+ case
$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$finalize_perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir=$hardcode_libdirs
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ finalize_rpath=$rpath
+
+ if test -n "$libobjs" && test yes = "$build_old_libs"; then
+ # Transform all the library objects into standard objects.
+ compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" |
$NL2SP`
+ finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" |
$NL2SP`
+ fi
+
+ func_generate_dlsyms "$outputname" "@PROGRAM@" false
+
+ # template prelinking step
+ if test -n "$prelink_cmds"; then
+ func_execute_cmds "$prelink_cmds" 'exit $?'
+ fi
+
+ wrappers_required=:
+ case $host in
+ *cegcc* | *mingw32ce*)
+ # Disable wrappers for cegcc and mingw32ce hosts, we are cross
compiling anyway.
+ wrappers_required=false
+ ;;
+ *cygwin* | *mingw* )
+ test yes = "$build_libtool_libs" || wrappers_required=false
+ ;;
+ *)
+ if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
+ wrappers_required=false
+ fi
+ ;;
+ esac
+ $wrappers_required || {
+ # Replace the output file specification.
+ compile_command=`$ECHO "$compile_command" | $SED
's%@OUTPUT@%'"$output"'%g'`
+ link_command=$compile_command$compile_rpath
+
+ # We have no uninstalled library dependencies, so finalize right now.
+ exit_status=0
+ func_show_eval "$link_command" 'exit_status=$?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e
's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ # Delete the generated files.
+ if test -f "$output_objdir/${outputname}S.$objext"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
+ fi
+
+ exit $exit_status
+ }
+
+ if test -n "$compile_shlibpath$finalize_shlibpath"; then
+
compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\"
$compile_command"
+ fi
+ if test -n "$finalize_shlibpath"; then
+
finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\"
$finalize_command"
+ fi
+
+ compile_var=
+ finalize_var=
+ if test -n "$runpath_var"; then
+ if test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ if test -n "$finalize_perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $finalize_perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ fi
+
+ if test yes = "$no_install"; then
+ # We don't need to create a wrapper script.
+ link_command=$compile_var$compile_command$compile_rpath
+ # Replace the output file specification.
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ # Delete the old output file.
+ $opt_dry_run || $RM $output
+ # Link the executable and exit
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e
's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ case $hardcode_action,$fast_install in
+ relink,*)
+ # Fast installation is not supported
+ link_command=$compile_var$compile_command$compile_rpath
+ relink_command=$finalize_var$finalize_command$finalize_rpath
+
+ func_warning "this platform does not like uninstalled shared
libraries"
+ func_warning "'$output' will be relinked during installation"
+ ;;
+ *,yes)
+ link_command=$finalize_var$compile_command$finalize_rpath
+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" |
$SED 's%@OUTPUT@%\$progdir/\$file%g'`
+ ;;
+ *,no)
+ link_command=$compile_var$compile_command$compile_rpath
+ relink_command=$finalize_var$finalize_command$finalize_rpath
+ ;;
+ *,needless)
+ link_command=$finalize_var$compile_command$finalize_rpath
+ relink_command=
+ ;;
+ esac
+
+ # Replace the output file specification.
+ link_command=`$ECHO "$link_command" | $SED
's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+ # Delete the old output files.
+ $opt_dry_run || $RM $output $output_objdir/$outputname
$output_objdir/lt-$outputname
+
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output_objdir/$outputname"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e
's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e
's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ # Now create the wrapper script.
+ func_verbose "creating $output"
+
+ # Quote the relink command for shipping.
+ if test -n "$relink_command"; then
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || {
$var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_arg pretty "$var_value"
+ relink_command="$var=$func_quote_arg_result; export $var;
$relink_command"
+ fi
+ done
+ func_quote eval cd "`pwd`"
+ func_quote_arg pretty,unquoted "($func_quote_result; $relink_command)"
+ relink_command=$func_quote_arg_unquoted_result
+ fi
+
+ # Only actually do things if not in dry run mode.
+ $opt_dry_run || {
+ # win32 will think the script is a binary if it has
+ # a .exe suffix, so we strip it off here.
+ case $output in
+ *.exe) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result ;;
+ esac
+ # test for cygwin because mv fails w/o .exe extensions
+ case $host in
+ *cygwin*)
+ exeext=.exe
+ func_stripname '' '.exe' "$outputname"
+ outputname=$func_stripname_result ;;
+ *) exeext= ;;
+ esac
+ case $host in
+ *cygwin* | *mingw* )
+ func_dirname_and_basename "$output" "" "."
+ output_name=$func_basename_result
+ output_path=$func_dirname_result
+ cwrappersource=$output_path/$objdir/lt-$output_name.c
+ cwrapper=$output_path/$output_name.exe
+ $RM $cwrappersource $cwrapper
+ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_cwrapperexe_src > $cwrappersource
+
+ # The wrapper executable is built using the $host compiler,
+ # because it contains $host paths and files. If cross-
+ # compiling, it, like the target executable, must be
+ # executed on the $host or under an emulation environment.
+ $opt_dry_run || {
+ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+ $STRIP $cwrapper
+ }
+
+ # Now, create the wrapper script for func_source use:
+ func_ltwrapper_scriptname $cwrapper
+ $RM $func_ltwrapper_scriptname_result
+ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1
2 15
+ $opt_dry_run || {
+ # note: this script will not be executed, so do not chmod.
+ if test "x$build" = "x$host"; then
+ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+ else
+ func_emit_wrapper no > $func_ltwrapper_scriptname_result
+ fi
+ }
+ ;;
+ * )
+ $RM $output
+ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_wrapper no > $output
+ chmod +x $output
+ ;;
+ esac
+ }
+ exit $EXIT_SUCCESS
+ ;;
+ esac
+
+ # See if we need to build an old-fashioned archive.
+ for oldlib in $oldlibs; do
+
+ case $build_libtool_libs in
+ convenience)
+ oldobjs="$libobjs_save $symfileobj"
+ addlibs=$convenience
+ build_libtool_libs=no
+ ;;
+ module)
+ oldobjs=$libobjs_save
+ addlibs=$old_convenience
+ build_libtool_libs=no
+ ;;
+ *)
+ oldobjs="$old_deplibs $non_pic_objects"
+ $preload && test -f "$symfileobj" \
+ && func_append oldobjs " $symfileobj"
+ addlibs=$old_convenience
+ ;;
+ esac
+
+ if test -n "$addlibs"; then
+ gentop=$output_objdir/${outputname}x
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $addlibs
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # Do each command in the archive commands.
+ if test -n "$old_archive_from_new_cmds" && test yes =
"$build_libtool_libs"; then
+ cmds=$old_archive_from_new_cmds
+ else
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop=$output_objdir/${outputname}x
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # POSIX demands no paths to be encoded in archives. We have
+ # to avoid creating archives with duplicate basenames if we
+ # might have to extract them afterwards, e.g., when creating a
+ # static archive out of a convenience library, or when linking
+ # the entirety of a libtool archive into another (currently
+ # not supported by libtool).
+ if (for obj in $oldobjs
+ do
+ func_basename "$obj"
+ $ECHO "$func_basename_result"
+ done | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ echo "copying selected object files to avoid basename conflicts..."
+ gentop=$output_objdir/${outputname}x
+ func_append generated " $gentop"
+ func_mkdir_p "$gentop"
+ save_oldobjs=$oldobjs
+ oldobjs=
+ counter=1
+ for obj in $save_oldobjs
+ do
+ func_basename "$obj"
+ objbase=$func_basename_result
+ case " $oldobjs " in
+ " ") oldobjs=$obj ;;
+ *[\ /]"$objbase "*)
+ while :; do
+ # Make sure we don't pick an alternate name that also
+ # overlaps.
+ newobj=lt$counter-$objbase
+ func_arith $counter + 1
+ counter=$func_arith_result
+ case " $oldobjs " in
+ *[\ /]"$newobj "*) ;;
+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+ esac
+ done
+ func_show_eval "ln $obj $gentop/$newobj || cp $obj
$gentop/$newobj"
+ func_append oldobjs " $gentop/$newobj"
+ ;;
+ *) func_append oldobjs " $obj" ;;
+ esac
+ done
+ fi
+ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+ tool_oldlib=$func_to_tool_file_result
+ eval cmds=\"$old_archive_cmds\"
+
+ func_len " $cmds"
+ len=$func_len_result
+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ cmds=$old_archive_cmds
+ elif test -n "$archiver_list_spec"; then
+ func_verbose "using command file archive linking..."
+ for obj in $oldobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > $output_objdir/$libname.libcmd
+ func_to_tool_file "$output_objdir/$libname.libcmd"
+ oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+ cmds=$old_archive_cmds
+ else
+ # the command line is too long to link in one step, link in parts
+ func_verbose "using piecewise archive linking..."
+ save_RANLIB=$RANLIB
+ RANLIB=:
+ objlist=
+ concat_cmds=
+ save_oldobjs=$oldobjs
+ oldobjs=
+ # Is there a better way of finding the last object in the list?
+ for obj in $save_oldobjs
+ do
+ last_oldobj=$obj
+ done
+ eval test_cmds=\"$old_archive_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+ for obj in $save_oldobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ func_append objlist " $obj"
+ if test "$len" -lt "$max_cmd_len"; then
+ :
+ else
+ # the above command should be used before it gets too long
+ oldobjs=$objlist
+ if test "$obj" = "$last_oldobj"; then
+ RANLIB=$save_RANLIB
+ fi
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
+ objlist=
+ len=$len0
+ fi
+ done
+ RANLIB=$save_RANLIB
+ oldobjs=$objlist
+ if test -z "$oldobjs"; then
+ eval cmds=\"\$concat_cmds\"
+ else
+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+ fi
+ fi
+ fi
+ func_execute_cmds "$cmds" 'exit $?'
+ done
+
+ test -n "$generated" && \
+ func_show_eval "${RM}r$generated"
+
+ # Now create the libtool archive.
+ case $output in
+ *.la)
+ old_library=
+ test yes = "$build_old_libs" && old_library=$libname.$libext
+ func_verbose "creating $output"
+
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || {
$var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_arg pretty,unquoted "$var_value"
+ relink_command="$var=$func_quote_arg_unquoted_result; export $var;
$relink_command"
+ fi
+ done
+ # Quote the link command for shipping.
+ func_quote eval cd "`pwd`"
+ relink_command="($func_quote_result; $SHELL \"$progpath\" $preserve_args
--mode=relink $libtool_args @inst_prefix_dir@)"
+ func_quote_arg pretty,unquoted "$relink_command"
+ relink_command=$func_quote_arg_unquoted_result
+ if test yes = "$hardcode_automatic"; then
+ relink_command=
+ fi
+
+ # Only create the output if not a dry run.
+ $opt_dry_run || {
+ for installed in no yes; do
+ if test yes = "$installed"; then
+ if test -z "$install_libdir"; then
+ break
+ fi
+ output=$output_objdir/${outputname}i
+ # Replace all uninstalled libtool libraries with the installed ones
+ newdependency_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ *.la)
+ func_basename "$deplib"
+ name=$func_basename_result
+ func_resolve_sysroot "$deplib"
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p'
$func_resolve_sysroot_result`
+ test -z "$libdir" && \
+ func_fatal_error "'$deplib' is not a valid libtool archive"
+ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ -L*)
+ func_stripname -L '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -L$func_replace_sysroot_result"
+ ;;
+ -R*)
+ func_stripname -R '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -R$func_replace_sysroot_result"
+ ;;
+ *) func_append newdependency_libs " $deplib" ;;
+ esac
+ done
+ dependency_libs=$newdependency_libs
+ newdlfiles=
+
+ for lib in $dlfiles; do
+ case $lib in
+ *.la)
+ func_basename "$lib"
+ name=$func_basename_result
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "'$lib' is not a valid libtool archive"
+ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ *) func_append newdlfiles " $lib" ;;
+ esac
+ done
+ dlfiles=$newdlfiles
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ *.la)
+ # Only pass preopened files to the pseudo-archive (for
+ # eventual linking with the app. that links it) if we
+ # didn't already link the preopened objects directly into
+ # the library:
+ func_basename "$lib"
+ name=$func_basename_result
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "'$lib' is not a valid libtool archive"
+ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ esac
+ done
+ dlprefiles=$newdlprefiles
+ else
+ newdlfiles=
+ for lib in $dlfiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ func_append newdlfiles " $abs"
+ done
+ dlfiles=$newdlfiles
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ func_append newdlprefiles " $abs"
+ done
+ dlprefiles=$newdlprefiles
+ fi
+ $RM $output
+ # place dlname in correct position for cygwin
+ # In fact, it would be nice if we could use this code for all target
+ # systems that can't hard-code library paths into their executables
+ # and that have no shared library path variable independent of PATH,
+ # but it turns out we can't easily determine that from inspecting
+ # libtool variables, so we have to hard-code the OSs to which it
+ # applies here; at the moment, that means platforms that use the PE
+ # object format with DLL files. See the long comment at the top of
+ # tests/bindir.at for full details.
+ tdlname=$dlname
+ case $host,$output,$installed,$module,$dlname in
+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll |
*cegcc*,*lai,yes,no,*.dll)
+ # If a -bindir argument was supplied, place the dll there.
+ if test -n "$bindir"; then
+ func_relative_path "$install_libdir" "$bindir"
+ tdlname=$func_relative_path_result/$dlname
+ else
+ # Otherwise fall back on heuristic.
+ tdlname=../bin/$dlname
+ fi
+ ;;
+ esac
+ $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that cannot go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+ if test no,yes = "$installed,$need_relink"; then
+ $ECHO >> $output "\
+relink_command=\"$relink_command\""
+ fi
+ done
+ }
+
+ # Do a symbolic link so that the libtool archive can be found in
+ # LD_LIBRARY_PATH before the program is installed.
+ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S
"../$outputname" "$outputname" )' 'exit $?'
+ ;;
+ esac
+ exit $EXIT_SUCCESS
+}
+
+if test link = "$opt_mode" || test relink = "$opt_mode"; then
+ func_mode_link ${1+"$@"}
+fi
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+ $debug_cmd
+
+ RM=$nonopt
+ files=
+ rmforce=false
+ exit_status=0
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic=$magic
+
+ for arg
+ do
+ case $arg in
+ -f) func_append RM " $arg"; rmforce=: ;;
+ -*) func_append RM " $arg" ;;
+ *) func_append files " $arg" ;;
+ esac
+ done
+
+ test -z "$RM" && \
+ func_fatal_help "you must specify an RM program"
+
+ rmdirs=
+
+ for file in $files; do
+ func_dirname "$file" "" "."
+ dir=$func_dirname_result
+ if test . = "$dir"; then
+ odir=$objdir
+ else
+ odir=$dir/$objdir
+ fi
+ func_basename "$file"
+ name=$func_basename_result
+ test uninstall = "$opt_mode" && odir=$dir
+
+ # Remember odir for removal later, being careful to avoid duplicates
+ if test clean = "$opt_mode"; then
+ case " $rmdirs " in
+ *" $odir "*) ;;
+ *) func_append rmdirs " $odir" ;;
+ esac
+ fi
+
+ # Don't error if the file doesn't exist and rm -f was used.
+ if { test -L "$file"; } >/dev/null 2>&1 ||
+ { test -h "$file"; } >/dev/null 2>&1 ||
+ test -f "$file"; then
+ :
+ elif test -d "$file"; then
+ exit_status=1
+ continue
+ elif $rmforce; then
+ continue
+ fi
+
+ rmfiles=$file
+
+ case $name in
+ *.la)
+ # Possibly a libtool archive, so verify it.
+ if func_lalib_p "$file"; then
+ func_source $dir/$name
+
+ # Delete the libtool libraries and symlinks.
+ for n in $library_names; do
+ func_append rmfiles " $odir/$n"
+ done
+ test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+ case $opt_mode in
+ clean)
+ case " $library_names " in
+ *" $dlname "*) ;;
+ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+ esac
+ test -n "$libdir" && func_append rmfiles " $odir/$name
$odir/${name}i"
+ ;;
+ uninstall)
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+ func_execute_cmds "$postuninstall_cmds" '$rmforce ||
exit_status=1'
+ fi
+
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+ func_execute_cmds "$old_postuninstall_cmds" '$rmforce ||
exit_status=1'
+ fi
+ # FIXME: should reinstall the best remaining shared library.
+ ;;
+ esac
+ fi
+ ;;
+
+ *.lo)
+ # Possibly a libtool object, so verify it.
+ if func_lalib_p "$file"; then
+
+ # Read the .lo file
+ func_source $dir/$name
+
+ # Add PIC object to the list of files to remove.
+ if test -n "$pic_object" && test none != "$pic_object"; then
+ func_append rmfiles " $dir/$pic_object"
+ fi
+
+ # Add non-PIC object to the list of files to remove.
+ if test -n "$non_pic_object" && test none != "$non_pic_object"; then
+ func_append rmfiles " $dir/$non_pic_object"
+ fi
+ fi
+ ;;
+
+ *)
+ if test clean = "$opt_mode"; then
+ noexename=$name
+ case $file in
+ *.exe)
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ func_stripname '' '.exe' "$name"
+ noexename=$func_stripname_result
+ # $file with .exe has already been added to rmfiles,
+ # add $file without .exe
+ func_append rmfiles " $file"
+ ;;
+ esac
+ # Do a test to see if this is a libtool program.
+ if func_ltwrapper_p "$file"; then
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ relink_command=
+ func_source $func_ltwrapper_scriptname_result
+ func_append rmfiles " $func_ltwrapper_scriptname_result"
+ else
+ relink_command=
+ func_source $dir/$noexename
+ fi
+
+ # note $name still contains .exe if it was in $file originally
+ # as does the version of $file that was added into $rmfiles
+ func_append rmfiles " $odir/$name $odir/${name}S.$objext"
+ if test yes = "$fast_install" && test -n "$relink_command"; then
+ func_append rmfiles " $odir/lt-$name"
+ fi
+ if test "X$noexename" != "X$name"; then
+ func_append rmfiles " $odir/lt-$noexename.c"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ func_show_eval "$RM $rmfiles" 'exit_status=1'
+ done
+
+ # Try to remove the $objdir's in the directories where we deleted files
+ for dir in $rmdirs; do
+ if test -d "$dir"; then
+ func_show_eval "rmdir $dir >/dev/null 2>&1"
+ fi
+ done
+
+ exit $exit_status
+}
+
+if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
+ func_mode_uninstall ${1+"$@"}
+fi
+
+test -z "$opt_mode" && {
+ help=$generic_help
+ func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+ func_fatal_help "invalid operation mode '$opt_mode'"
+
+if test -n "$exec_cmd"; then
+ eval exec "$exec_cmd"
+ exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# where we disable both kinds of libraries. Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them. This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration. But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/po/POTFILES b/po/POTFILES
new file mode 100644
index 0000000..6fe4277
--- /dev/null
+++ b/po/POTFILES
@@ -0,0 +1 @@
+ ../src/util/taler_error_codes.c
diff --git a/po/donau.pot b/po/donau.pot
new file mode 100644
index 0000000..02829f9
--- /dev/null
+++ b/po/donau.pot
@@ -0,0 +1,2669 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Taler Systems SA
+# This file is distributed under the same license as the GNU donau package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: GNU donau 0.9.2\n"
+"Report-Msgid-Bugs-To: taler@gnu.org\n"
+"POT-Creation-Date: 2023-12-18 22:41+0100\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/util/taler_error_codes.c:62
+msgid "Special code to indicate success (no error)."
+msgstr ""
+
+#: src/util/taler_error_codes.c:68
+msgid "A non-integer error code was returned in the JSON response."
+msgstr ""
+
+#: src/util/taler_error_codes.c:74
+msgid "An internal failure happened on the client side."
+msgstr ""
+
+#: src/util/taler_error_codes.c:80
+msgid "The response we got from the server was not even in JSON format."
+msgstr ""
+
+#: src/util/taler_error_codes.c:86
+msgid "An operation timed out."
+msgstr ""
+
+#: src/util/taler_error_codes.c:92
+msgid ""
+"The version string given does not follow the expected CURRENT:REVISION:AGE "
+"Format."
+msgstr ""
+
+#: src/util/taler_error_codes.c:98
+msgid ""
+"The service responded with a reply that was in JSON but did not satsify the "
+"protocol. Note that invalid cryptographic signatures should have signature-"
+"specific error codes."
+msgstr ""
+
+#: src/util/taler_error_codes.c:104
+msgid ""
+"There is an error in the client-side configuration, for example the base URL "
+"specified is malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:110
+msgid ""
+"The client made a request to a service, but received an error response it "
+"does not know how to handle."
+msgstr ""
+
+#: src/util/taler_error_codes.c:116
+msgid ""
+"The token used by the client to authorize the request does not grant the "
+"required permissions for the request."
+msgstr ""
+
+#: src/util/taler_error_codes.c:122
+msgid "The HTTP method used is invalid for this endpoint."
+msgstr ""
+
+#: src/util/taler_error_codes.c:128
+msgid "There is no endpoint defined for the URL provided by the client."
+msgstr ""
+
+#: src/util/taler_error_codes.c:134
+msgid "The JSON in the client's request was malformed (generic parse error)."
+msgstr ""
+
+#: src/util/taler_error_codes.c:140
+msgid ""
+"Some of the HTTP headers provided by the client caused the server to not be "
+"able to handle the request."
+msgstr ""
+
+#: src/util/taler_error_codes.c:146
+msgid "The payto:// URI provided by the client is malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:152
+msgid "A required parameter in the request was missing."
+msgstr ""
+
+#: src/util/taler_error_codes.c:158
+msgid "A parameter in the request was malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:164
+msgid ""
+"The reserve public key given as part of a /reserves/ endpoint was malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:170
+msgid "The body in the request could not be decompressed by the server."
+msgstr ""
+
+#: src/util/taler_error_codes.c:176
+msgid ""
+"The currency involved in the operation is not acceptable for this backend."
+msgstr ""
+
+#: src/util/taler_error_codes.c:182
+msgid ""
+"The URI is longer than the longest URI the HTTP server is willing to parse."
+msgstr ""
+
+#: src/util/taler_error_codes.c:188
+msgid "The body is too large to be permissible for the endpoint."
+msgstr ""
+
+#: src/util/taler_error_codes.c:194
+msgid "The service refused the request due to lack of proper authorization."
+msgstr ""
+
+#: src/util/taler_error_codes.c:200
+msgid ""
+"The service refused the request as the given authorization token is unknown."
+msgstr ""
+
+#: src/util/taler_error_codes.c:206
+msgid ""
+"The service refused the request as the given authorization token expired."
+msgstr ""
+
+#: src/util/taler_error_codes.c:212
+msgid ""
+"The service refused the request as the given authorization token is "
+"malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:218
+msgid ""
+"The service refused the request due to lack of proper rights on the resource."
+msgstr ""
+
+#: src/util/taler_error_codes.c:224
+msgid "The service failed initialize its connection to the database."
+msgstr ""
+
+#: src/util/taler_error_codes.c:230
+msgid ""
+"The service encountered an error event to just start the database "
+"transaction."
+msgstr ""
+
+#: src/util/taler_error_codes.c:236
+msgid "The service failed to store information in its database."
+msgstr ""
+
+#: src/util/taler_error_codes.c:242
+msgid "The service failed to fetch information from its database."
+msgstr ""
+
+#: src/util/taler_error_codes.c:248
+msgid ""
+"The service encountered an error event to commit the database transaction "
+"(hard, unrecoverable error)."
+msgstr ""
+
+#: src/util/taler_error_codes.c:254
+msgid ""
+"The service encountered an error event to commit the database transaction, "
+"even after repeatedly retrying it there was always a conflicting "
+"transaction. (This indicates a repeated serialization error; should only "
+"happen if some client maliciously tries to create conflicting concurrent "
+"transactions.)"
+msgstr ""
+
+#: src/util/taler_error_codes.c:260
+msgid ""
+"The service's database is inconsistent and violates service-internal "
+"invariants."
+msgstr ""
+
+#: src/util/taler_error_codes.c:266
+msgid "The HTTP server experienced an internal invariant failure (bug)."
+msgstr ""
+
+#: src/util/taler_error_codes.c:272
+msgid ""
+"The service could not compute a cryptographic hash over some JSON value."
+msgstr ""
+
+#: src/util/taler_error_codes.c:278
+msgid "The service could not compute an amount."
+msgstr ""
+
+#: src/util/taler_error_codes.c:284
+msgid "The HTTP server had insufficient memory to parse the request."
+msgstr ""
+
+#: src/util/taler_error_codes.c:290
+msgid "The HTTP server failed to allocate memory."
+msgstr ""
+
+#: src/util/taler_error_codes.c:296
+msgid "The HTTP server failed to allocate memory for building JSON reply."
+msgstr ""
+
+#: src/util/taler_error_codes.c:302
+msgid "The HTTP server failed to allocate memory for making a CURL request."
+msgstr ""
+
+#: src/util/taler_error_codes.c:308
+msgid ""
+"The backend could not locate a required template to generate an HTML reply."
+msgstr ""
+
+#: src/util/taler_error_codes.c:314
+msgid "The backend could not expand the template to generate an HTML reply."
+msgstr ""
+
+#: src/util/taler_error_codes.c:320
+msgid "Exchange is badly configured and thus cannot operate."
+msgstr ""
+
+#: src/util/taler_error_codes.c:326
+msgid "Operation specified unknown for this endpoint."
+msgstr ""
+
+#: src/util/taler_error_codes.c:332
+msgid ""
+"The number of segments included in the URI does not match the number of "
+"segments expected by the endpoint."
+msgstr ""
+
+#: src/util/taler_error_codes.c:338
+msgid ""
+"The same coin was already used with a different denomination previously."
+msgstr ""
+
+#: src/util/taler_error_codes.c:344
+msgid ""
+"The public key of given to a \"/coins/\" endpoint of the exchange was "
+"malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:350
+msgid ""
+"The exchange is not aware of the denomination key the wallet requested for "
+"the operation."
+msgstr ""
+
+#: src/util/taler_error_codes.c:356
+msgid "The signature of the denomination key over the coin is not valid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:362
+msgid ""
+"The exchange failed to perform the operation as it could not find the "
+"private keys. This is a problem with the exchange setup, not with the "
+"client's request."
+msgstr ""
+
+#: src/util/taler_error_codes.c:368
+msgid "Validity period of the denomination lies in the future."
+msgstr ""
+
+#: src/util/taler_error_codes.c:374
+msgid ""
+"Denomination key of the coin is past its expiration time for the requested "
+"operation."
+msgstr ""
+
+#: src/util/taler_error_codes.c:380
+msgid "Denomination key of the coin has been revoked."
+msgstr ""
+
+#: src/util/taler_error_codes.c:386
+msgid ""
+"An operation where the exchange interacted with a security module timed out."
+msgstr ""
+
+#: src/util/taler_error_codes.c:392
+msgid ""
+"The respective coin did not have sufficient residual value for the "
+"operation. The \"history\" in this response provides the \"residual_value\" "
+"of the coin, which may be less than its \"original_value\"."
+msgstr ""
+
+#: src/util/taler_error_codes.c:398
+msgid ""
+"The exchange had an internal error reconstructing the transaction history of "
+"the coin that was being processed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:404
+msgid ""
+"The exchange failed to obtain the transaction history of the given coin from "
+"the database while generating an insufficient funds errors."
+msgstr ""
+
+#: src/util/taler_error_codes.c:410
+msgid "The same coin was already used with a different age hash previously."
+msgstr ""
+
+#: src/util/taler_error_codes.c:416
+msgid ""
+"The requested operation is not valid for the cipher used by the selected "
+"denomination."
+msgstr ""
+
+#: src/util/taler_error_codes.c:422
+msgid "The provided arguments for the operation use inconsistent ciphers."
+msgstr ""
+
+#: src/util/taler_error_codes.c:428
+msgid ""
+"The number of denominations specified in the request exceeds the limit of "
+"the exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:434
+msgid "The coin is not known to the exchange (yet)."
+msgstr ""
+
+#: src/util/taler_error_codes.c:440
+msgid ""
+"The time at the server is too far off from the time specified in the "
+"request. Most likely the client system time is wrong."
+msgstr ""
+
+#: src/util/taler_error_codes.c:446
+msgid ""
+"The specified amount for the coin is higher than the value of the "
+"denomination of the coin."
+msgstr ""
+
+#: src/util/taler_error_codes.c:452
+msgid "The exchange was not properly configured with global fees."
+msgstr ""
+
+#: src/util/taler_error_codes.c:458
+msgid "The exchange was not properly configured with wire fees."
+msgstr ""
+
+#: src/util/taler_error_codes.c:464
+msgid "The purse public key was malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:470
+msgid "The purse is unknown."
+msgstr ""
+
+#: src/util/taler_error_codes.c:476
+msgid "The purse has expired."
+msgstr ""
+
+#: src/util/taler_error_codes.c:482
+msgid ""
+"The exchange has no information about the \"reserve_pub\" that was given."
+msgstr ""
+
+#: src/util/taler_error_codes.c:488
+msgid ""
+"The exchange is not allowed to proceed with the operation until the client "
+"has satisfied a KYC check."
+msgstr ""
+
+#: src/util/taler_error_codes.c:494
+msgid ""
+"Inconsistency between provided age commitment and attest: either none or "
+"both must be provided"
+msgstr ""
+
+#: src/util/taler_error_codes.c:500
+msgid ""
+"The provided attestation for the minimum age couldn't be verified by the "
+"exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:506
+msgid "The purse was deleted."
+msgstr ""
+
+#: src/util/taler_error_codes.c:512
+msgid "The public key of the AML officer in the URL was malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:518
+msgid "The signature affirming the GET request of the AML officer is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:524
+msgid "The specified AML officer does not have access at this time."
+msgstr ""
+
+#: src/util/taler_error_codes.c:530
+msgid ""
+"The requested operation is denied pending the resolution of an anti-money "
+"laundering investigation by the exchange operator. This is a manual process, "
+"please wait and retry later."
+msgstr ""
+
+#: src/util/taler_error_codes.c:536
+msgid ""
+"The requested operation is denied as the account was frozen on suspicion of "
+"money laundering. Please contact the exchange operator."
+msgstr ""
+
+#: src/util/taler_error_codes.c:542
+msgid ""
+"The exchange failed to start a KYC attribute conversion helper process. It "
+"is likely configured incorrectly."
+msgstr ""
+
+#: src/util/taler_error_codes.c:548
+msgid ""
+"The exchange did not find information about the specified transaction in the "
+"database."
+msgstr ""
+
+#: src/util/taler_error_codes.c:554
+msgid "The wire hash of given to a \"/deposits/\" handler was malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:560
+msgid "The merchant key of given to a \"/deposits/\" handler was malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:566
+msgid ""
+"The hash of the contract terms given to a \"/deposits/\" handler was "
+"malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:572
+msgid "The coin public key of given to a \"/deposits/\" handler was malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:578
+msgid ""
+"The signature returned by the exchange in a /deposits/ request was malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:584 src/util/taler_error_codes.c:938
+msgid "The signature of the merchant is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:590
+msgid "The provided policy data was not accepted"
+msgstr ""
+
+#: src/util/taler_error_codes.c:596
+msgid ""
+"The given reserve does not have sufficient funds to admit the requested "
+"withdraw operation at this time. The response includes the current "
+"\"balance\" of the reserve as well as the transaction \"history\" that lead "
+"to this balance."
+msgstr ""
+
+#: src/util/taler_error_codes.c:602
+msgid ""
+"The given reserve does not have sufficient funds to admit the requested age-"
+"withdraw operation at this time. The response includes the current "
+"\"balance\" of the reserve as well as the transaction \"history\" that lead "
+"to this balance."
+msgstr ""
+
+#: src/util/taler_error_codes.c:608
+msgid ""
+"The amount to withdraw together with the fee exceeds the numeric range for "
+"Taler amounts. This is not a client failure, as the coin value and fees "
+"come from the exchange's configuration."
+msgstr ""
+
+#: src/util/taler_error_codes.c:614
+msgid "The exchange failed to create the signature using the denomination key."
+msgstr ""
+
+#: src/util/taler_error_codes.c:620
+msgid "The signature of the reserve is not valid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:626
+msgid ""
+"When computing the reserve history, we ended up with a negative overall "
+"balance, which should be impossible."
+msgstr ""
+
+#: src/util/taler_error_codes.c:632
+msgid ""
+"The reserve did not have sufficient funds in it to pay for a full reserve "
+"history statement."
+msgstr ""
+
+#: src/util/taler_error_codes.c:638
+msgid "Withdraw period of the coin to be withdrawn is in the past."
+msgstr ""
+
+#: src/util/taler_error_codes.c:644
+msgid "The client failed to unblind the blind signature."
+msgstr ""
+
+#: src/util/taler_error_codes.c:650
+msgid "The client re-used a withdraw nonce, which is not allowed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:656
+msgid "The client provided an unknown commitment for an age-withdraw request."
+msgstr ""
+
+#: src/util/taler_error_codes.c:662
+msgid "The total sum of amounts from the denominations did overflow."
+msgstr ""
+
+#: src/util/taler_error_codes.c:668
+msgid ""
+"The total sum of value and fees from the denominations differs from the "
+"committed amount with fees."
+msgstr ""
+
+#: src/util/taler_error_codes.c:674
+msgid "The original commitment differs from the calculated hash"
+msgstr ""
+
+#: src/util/taler_error_codes.c:680
+msgid "The maximum age in the commitment is too large for the reserve"
+msgstr ""
+
+#: src/util/taler_error_codes.c:686
+msgid ""
+"The batch withdraw included a planchet that was already withdrawn. This is "
+"not allowed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:692
+msgid ""
+"The signature made by the coin over the deposit permission is not valid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:698
+msgid ""
+"The same coin was already deposited for the same merchant and contract with "
+"other details."
+msgstr ""
+
+#: src/util/taler_error_codes.c:704
+msgid ""
+"The stated value of the coin after the deposit fee is subtracted would be "
+"negative."
+msgstr ""
+
+#: src/util/taler_error_codes.c:710
+msgid "The stated refund deadline is after the wire deadline."
+msgstr ""
+
+#: src/util/taler_error_codes.c:716
+msgid "The stated wire deadline is \"never\", which makes no sense."
+msgstr ""
+
+#: src/util/taler_error_codes.c:722
+msgid ""
+"The exchange failed to canonicalize and hash the given wire format. For "
+"example, the merchant failed to provide the \"salt\" or a valid payto:// URI "
+"in the wire details. Note that while the exchange will do some basic sanity "
+"checking on the wire details, it cannot warrant that the banking system will "
+"ultimately be able to route to the specified address, even if this check "
+"passed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:728
+msgid ""
+"The hash of the given wire address does not match the wire hash specified in "
+"the proposal data."
+msgstr ""
+
+#: src/util/taler_error_codes.c:734
+msgid "The signature provided by the exchange is not valid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:740
+msgid ""
+"The deposited amount is smaller than the deposit fee, which would result in "
+"a negative contribution."
+msgstr ""
+
+#: src/util/taler_error_codes.c:746
+msgid "The proof of policy fulfillment was invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:752
+msgid "The coin history was requested with a bad signature."
+msgstr ""
+
+#: src/util/taler_error_codes.c:758
+msgid "The reserve history was requested with a bad signature."
+msgstr ""
+
+#: src/util/taler_error_codes.c:764
+msgid ""
+"The exchange encountered melt fees exceeding the melted coin's contribution."
+msgstr ""
+
+#: src/util/taler_error_codes.c:770
+msgid "The signature made with the coin to be melted is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:776
+msgid ""
+"The denomination of the given coin has past its expiration date and it is "
+"also not a valid zombie (that is, was not refreshed with the fresh coin "
+"being subjected to recoup)."
+msgstr ""
+
+#: src/util/taler_error_codes.c:782
+msgid "The signature returned by the exchange in a melt request was malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:788
+msgid ""
+"The provided transfer keys do not match up with the original commitment. "
+"Information about the original commitment is included in the response."
+msgstr ""
+
+#: src/util/taler_error_codes.c:794
+msgid "Failed to produce the blinded signatures over the coins to be returned."
+msgstr ""
+
+#: src/util/taler_error_codes.c:800
+msgid ""
+"The exchange is unaware of the refresh session specified in the request."
+msgstr ""
+
+#: src/util/taler_error_codes.c:806
+msgid ""
+"The size of the cut-and-choose dimension of the private transfer keys "
+"request does not match #TALER_CNC_KAPPA - 1."
+msgstr ""
+
+#: src/util/taler_error_codes.c:812
+msgid ""
+"The number of envelopes given does not match the number of denomination keys "
+"given."
+msgstr ""
+
+#: src/util/taler_error_codes.c:818
+msgid ""
+"The exchange encountered a numeric overflow totaling up the cost for the "
+"refresh operation."
+msgstr ""
+
+#: src/util/taler_error_codes.c:824
+msgid ""
+"The exchange's cost calculation shows that the melt amount is below the "
+"costs of the transaction."
+msgstr ""
+
+#: src/util/taler_error_codes.c:830
+msgid "The signature made with the coin over the link data is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:836
+msgid "The refresh session hash given to a /refreshes/ handler was malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:842
+msgid "Operation specified invalid for this endpoint."
+msgstr ""
+
+#: src/util/taler_error_codes.c:848
+msgid ""
+"The client provided age commitment data, but age restriction is not "
+"supported on this server."
+msgstr ""
+
+#: src/util/taler_error_codes.c:854
+msgid ""
+"The client provided invalid age commitment data: missing, not an array, or "
+"array of invalid size."
+msgstr ""
+
+#: src/util/taler_error_codes.c:860
+msgid "The coin specified in the link request is unknown to the exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:866
+msgid "The public key of given to a /transfers/ handler was malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:872
+msgid ""
+"The exchange did not find information about the specified wire transfer "
+"identifier in the database."
+msgstr ""
+
+#: src/util/taler_error_codes.c:878
+msgid ""
+"The exchange did not find information about the wire transfer fees it "
+"charged."
+msgstr ""
+
+#: src/util/taler_error_codes.c:884
+msgid ""
+"The exchange found a wire fee that was above the total transfer value (and "
+"thus could not have been charged)."
+msgstr ""
+
+#: src/util/taler_error_codes.c:890
+msgid "The wait target of the URL was not in the set of expected values."
+msgstr ""
+
+#: src/util/taler_error_codes.c:896
+msgid "The signature on the purse status returned by the exchange was invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:902
+msgid ""
+"The exchange knows literally nothing about the coin we were asked to refund. "
+"But without a transaction history, we cannot issue a refund. This is kind-of "
+"OK, the owner should just refresh it directly without executing the refund."
+msgstr ""
+
+#: src/util/taler_error_codes.c:908
+msgid ""
+"We could not process the refund request as the coin's transaction history "
+"does not permit the requested refund because then refunds would exceed the "
+"deposit amount. The \"history\" in the response proves this."
+msgstr ""
+
+#: src/util/taler_error_codes.c:914
+msgid ""
+"The exchange knows about the coin we were asked to refund, but not about the "
+"specific /deposit operation. Hence, we cannot issue a refund (as we do not "
+"know if this merchant public key is authorized to do a refund)."
+msgstr ""
+
+#: src/util/taler_error_codes.c:920
+msgid ""
+"The exchange can no longer refund the customer/coin as the money was already "
+"transferred (paid out) to the merchant. (It should be past the refund "
+"deadline.)"
+msgstr ""
+
+#: src/util/taler_error_codes.c:926
+msgid ""
+"The refund fee specified for the request is lower than the refund fee "
+"charged by the exchange for the given denomination key of the refunded coin."
+msgstr ""
+
+#: src/util/taler_error_codes.c:932
+msgid ""
+"The refunded amount is smaller than the refund fee, which would result in a "
+"negative refund."
+msgstr ""
+
+#: src/util/taler_error_codes.c:944
+msgid "Merchant backend failed to create the refund confirmation signature."
+msgstr ""
+
+#: src/util/taler_error_codes.c:950
+msgid ""
+"The signature returned by the exchange in a refund request was malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:956
+msgid "The failure proof returned by the exchange is incorrect."
+msgstr ""
+
+#: src/util/taler_error_codes.c:962
+msgid ""
+"Conflicting refund granted before with different amount but same refund "
+"transaction ID."
+msgstr ""
+
+#: src/util/taler_error_codes.c:968 src/util/taler_error_codes.c:1004
+msgid "The given coin signature is invalid for the request."
+msgstr ""
+
+#: src/util/taler_error_codes.c:974
+msgid ""
+"The exchange could not find the corresponding withdraw operation. The "
+"request is denied."
+msgstr ""
+
+#: src/util/taler_error_codes.c:980 src/util/taler_error_codes.c:992
+msgid "The coin's remaining balance is zero. The request is denied."
+msgstr ""
+
+#: src/util/taler_error_codes.c:986 src/util/taler_error_codes.c:1016
+msgid "The exchange failed to reproduce the coin's blinding."
+msgstr ""
+
+#: src/util/taler_error_codes.c:998 src/util/taler_error_codes.c:1022
+msgid "The coin's denomination has not been revoked yet."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1010
+msgid ""
+"The exchange could not find the corresponding melt operation. The request is "
+"denied."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1028
+msgid ""
+"This exchange does not allow clients to request /keys for times other than "
+"the current (exchange) time."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1034
+msgid "A signature in the server's response was malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1040
+msgid ""
+"No bank accounts are enabled for the exchange. The administrator should "
+"enable-account using the taler-exchange-offline tool."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1046
+msgid ""
+"The payto:// URI stored in the exchange database for its bank account is "
+"malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1052
+msgid ""
+"No wire fees are configured for an enabled wire method of the exchange. The "
+"administrator must set the wire-fee using the taler-exchange-offline tool."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1058
+msgid "This purse was previously created with different meta data."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1064
+msgid "This purse was previously merged with different meta data."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1070
+msgid "The reserve has insufficient funds to create another purse."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1076
+msgid ""
+"The purse fee specified for the request is lower than the purse fee charged "
+"by the exchange at this time."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1082
+msgid ""
+"The payment request cannot be deleted anymore, as it either already "
+"completed or timed out."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1088
+msgid "The signature affirming the purse deletion is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1094
+msgid "Withdrawal from the reserve requires age restriction to be set."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1100
+msgid ""
+"The exchange failed to talk to the process responsible for its private "
+"denomination keys or the helpers had no denominations (properly) configured."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1106
+msgid "The response from the denomination key helper process was malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1112 src/util/taler_error_codes.c:1136
+msgid ""
+"The helper refuses to sign with the key, because it is too early: the "
+"validity period has not yet started."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1118
+msgid "The signature of the exchange on the reply was invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1124
+msgid ""
+"The exchange failed to talk to the process responsible for its private "
+"signing keys."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1130
+msgid "The response from the online signing key helper process was malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1142
+msgid "The purse expiration time is in the past at the time of its creation."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1148
+msgid "The purse expiration time is set to never, which is not allowed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1154
+msgid "The signature affirming the merge of the purse is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1160
+msgid "The signature by the reserve affirming the merge is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1166
+msgid "The signature by the reserve affirming the open operation is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1172
+msgid "The signature by the reserve affirming the close operation is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1178
+msgid ""
+"The signature by the reserve affirming the attestion request is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1184
+msgid ""
+"The exchange does not know an origin account to which the remaining reserve "
+"balance could be wired to, and the wallet failed to provide one."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1190
+msgid "The reserve balance is insufficient to pay for the open operation."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1196
+msgid ""
+"The auditor that was supposed to be disabled is unknown to this exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1202 src/util/taler_error_codes.c:1232
+msgid ""
+"The exchange has a more recently signed conflicting instruction and is thus "
+"refusing the current change (replay detected)."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1208
+msgid "The signature to add or enable the auditor does not validate."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1214
+msgid "The signature to disable the auditor does not validate."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1220
+msgid "The signature to revoke the denomination does not validate."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1226
+msgid "The signature to revoke the online signing key does not validate."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1238
+msgid "The signingkey specified is unknown to the exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1244
+msgid "The signature to publish wire account does not validate."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1250
+msgid "The signature to add the wire account does not validate."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1256
+msgid "The signature to disable the wire account does not validate."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1262
+msgid "The wire account to be disabled is unknown to the exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1268
+msgid "The signature to affirm wire fees does not validate."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1274 src/util/taler_error_codes.c:1292
+msgid ""
+"The signature conflicts with a previous signature affirming different fees."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1280
+msgid "The signature affirming the denomination key is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1286
+msgid "The signature affirming the signing key is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1298
+msgid "The signature affirming the fee structure is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1304
+msgid "The signature affirming the profit drain is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1310
+msgid "The signature affirming the AML decision is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1316
+msgid ""
+"The AML officer specified is not allowed to make AML decisions right now."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1322
+msgid ""
+"There is a more recent AML decision on file. The decision was rejected as "
+"timestamps of AML decisions must be monotonically increasing."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1328
+msgid ""
+"There AML decision would impose an AML check of a type that is not provided "
+"by any KYC provider known to the exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1334
+msgid ""
+"The signature affirming the change in the AML officer status is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1340
+msgid ""
+"A more recent decision about the AML officer status is known to the exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1346
+msgid "The purse was previously created with different meta data."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1352
+msgid "The purse was previously created with a different contract."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1358 src/util/taler_error_codes.c:1586
+msgid "A coin signature for a deposit into the purse is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1364
+msgid "The purse expiration time is in the past."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1370
+msgid "The purse expiration time is \"never\"."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1376
+msgid "The purse signature over the purse meta data is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1382
+msgid "The signature over the encrypted contract is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1388 src/util/taler_error_codes.c:1430
+msgid "The signature from the exchange over the confirmation is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1394
+msgid "The coin was previously deposited with different meta data."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1400
+msgid ""
+"The encrypted contract was previously uploaded with different meta data."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1406
+msgid "The deposited amount is less than the purse fee."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1412
+msgid "The signature using the merge key is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1418
+msgid "The signature using the reserve key is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1424
+msgid ""
+"The targeted purse is not yet full and thus cannot be merged. Retrying the "
+"request later may succeed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1436
+msgid "The exchange of the target account is not a partner of this exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1442
+msgid "The signature affirming the new partner is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1448
+msgid "Conflicting data for the partner already exists with the exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1454
+msgid "The auditor signature over the denomination meta data is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1460
+msgid "The auditor that was specified is unknown to this exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1466
+msgid "The auditor that was specified is no longer used by this exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1472
+msgid "The signature affirming the wallet's KYC request was invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1478
+msgid ""
+"The exchange received an unexpected malformed response from its KYC backend."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1484
+msgid "The backend signaled an unexpected failure."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1490
+msgid "The backend signaled an authorization failure."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1496
+msgid "The exchange is unaware of having made an the authorization request."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1502
+msgid "The payto-URI hash did not match. Hence the request was denied."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1508
+msgid "The request used a logic specifier that is not known to the exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1514
+msgid ""
+"The request requires a logic which is no longer configured at the exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1520
+msgid "The logic plugin had a bug in its interaction with the KYC provider."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1526
+msgid ""
+"The exchange could not process the request with its KYC provider because the "
+"provider refused access to the service. This indicates some configuration "
+"issue at the Taler exchange operator."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1532
+msgid ""
+"There was a timeout in the interaction between the exchange and the KYC "
+"provider. The most likely cause is some networking problem. Trying again "
+"later might succeed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1538
+msgid ""
+"The KYC provider responded with a status that was completely unexpected by "
+"the KYC logic of the exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1544
+msgid ""
+"The rate limit of the exchange at the KYC provider has been exceeded. Trying "
+"much later might work."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1550
+msgid ""
+"The request to the webhook lacked proper authorization or authentication "
+"data."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1556
+msgid ""
+"The exchange does not know a contract under the given contract public key."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1562
+msgid "The URL does not encode a valid exchange public key in its path."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1568
+msgid "The returned encrypted contract did not decrypt."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1574
+msgid "The signature on the encrypted contract did not validate."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1580
+msgid "The decrypted contract was malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1592
+msgid "It is too late to deposit coins into the purse."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1598
+msgid "TOTP key is not valid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1604
+msgid ""
+"The backend could not find the merchant instance specified in the request."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1610
+msgid ""
+"The start and end-times in the wire fee structure leave a hole. This is not "
+"allowed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1616
+msgid ""
+"The merchant was unable to obtain a valid answer to /wire from the exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1622
+msgid "The proposal is not known to the backend."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1628
+msgid ""
+"The order provided to the backend could not be completed, because a product "
+"to be completed via inventory data is not actually in our inventory."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1634
+msgid "The reward ID is unknown. This could happen if the reward has expired."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1640
+msgid "The contract obtained from the merchant backend was malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1646
+msgid "The order we found does not match the provided contract hash."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1652
+msgid ""
+"The exchange failed to provide a valid response to the merchant's /keys "
+"request."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1658
+msgid "The exchange failed to respond to the merchant on time."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1664
+msgid "The merchant failed to talk to the exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1670
+msgid "The exchange returned a maformed response."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1676
+msgid "The exchange returned an unexpected response status."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1682
+msgid "The merchant refused the request due to lack of authorization."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1688
+msgid "The merchant instance specified in the request was deleted."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1694
+msgid ""
+"The backend could not find the inbound wire transfer specified in the "
+"request."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1700
+msgid "The backend could not find the template(id) because it is not exist."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1706
+msgid "The backend could not find the webhook(id) because it is not exist."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1712
+msgid "The backend could not find the webhook(serial) because it is not exist."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1718
+msgid "The backend could not find the OTP device(id) because it is not exist."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1724
+msgid "The account is not known to the backend."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1730
+msgid "The wire hash was malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1736
+msgid ""
+"The currency specified in the operation does not work with the current state "
+"of the given resource."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1742
+msgid ""
+"The exchange failed to provide a valid answer to the tracking request, thus "
+"those details are not in the response."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1748
+msgid ""
+"The merchant backend failed to construct the request for tracking to the "
+"exchange, thus tracking details are not in the response."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1754
+msgid ""
+"The merchant backend failed trying to contact the exchange for tracking "
+"details, thus those details are not in the response."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1760
+msgid ""
+"The claim token used to authenticate the client is invalid for this order."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1766
+msgid ""
+"The contract terms hash used to authenticate the client is invalid for this "
+"order."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1772
+msgid ""
+"The exchange responded saying that funds were insufficient (for example, due "
+"to double-spending)."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1778
+msgid ""
+"The denomination key used for payment is not listed among the denomination "
+"keys of the exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1784
+msgid ""
+"The denomination key used for payment is not audited by an auditor approved "
+"by the merchant."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1790
+msgid ""
+"There was an integer overflow totaling up the amounts or deposit fees in the "
+"payment."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1796
+msgid "The deposit fees exceed the total value of the payment."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1802
+msgid ""
+"After considering deposit and wire fees, the payment is insufficient to "
+"satisfy the required amount for the contract. The client should revisit the "
+"logic used to calculate fees it must cover."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1808
+msgid ""
+"Even if we do not consider deposit and wire fees, the payment is "
+"insufficient to satisfy the required amount for the contract."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1814
+msgid "The signature over the contract of one of the coins was invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1820
+msgid ""
+"When we tried to find information about the exchange to issue the deposit, "
+"we failed. This usually only happens if the merchant backend is somehow "
+"unable to get its own HTTP client logic to work."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1826
+msgid "The refund deadline in the contract is after the transfer deadline."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1832
+msgid "The order was already paid (maybe by another wallet)."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1838
+msgid "The payment is too late, the offer has expired."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1844
+msgid ""
+"The \"merchant\" field is missing in the proposal data. This is an internal "
+"error as the proposal is from the merchant's own database at this point."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1850
+msgid ""
+"Failed to locate merchant's account information matching the wire hash given "
+"in the proposal."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1856
+msgid "The deposit time for the denomination has expired."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1862
+msgid ""
+"The exchange of the deposited coin charges a wire fee that could not be "
+"added to the total (total amount too high)."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1868
+msgid ""
+"The contract was not fully paid because of refunds. Note that clients MAY "
+"treat this as paid if, for example, contracts must be executed despite of "
+"refunds."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1874
+msgid ""
+"According to our database, we have refunded more than we were paid (which "
+"should not be possible)."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1880
+msgid "Legacy stuff. Remove me with protocol v1."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1886
+msgid "The payment failed at the exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1892
+msgid ""
+"The payment required a minimum age but one of the coins (of a denomination "
+"with support for age restriction) did not provide any age_commitment."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1898
+msgid ""
+"The payment required a minimum age but one of the coins provided an "
+"age_commitment that contained a wrong number of public keys compared to the "
+"number of age groups defined in the denomination of the coin."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1904
+msgid ""
+"The payment required a minimum age but one of the coins provided a "
+"minimum_age_sig that couldn't be verified with the given age_commitment for "
+"that particular minimum age."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1910
+msgid ""
+"The payment required no minimum age but one of the coins (of a denomination "
+"with support for age restriction) did not provide the required "
+"h_age_commitment."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1916
+msgid ""
+"The exchange does not support the selected bank account of the merchant. "
+"Likely the merchant had stale data on the bank accounts of the exchange and "
+"thus selected an inappropriate exchange when making the offer."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1922
+msgid "The contract hash does not match the given order ID."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1928
+msgid "The signature of the merchant is not valid for the given contract hash."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1934
+msgid "The merchant failed to send the exchange the refund request."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1940
+msgid "The merchant failed to find the exchange to process the lookup."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1946
+msgid "The merchant could not find the contract."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1952
+msgid "The payment was already completed and thus cannot be aborted anymore."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1958
+msgid "The hash provided by the wallet does not match the order."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1964
+msgid "The array of coins cannot be empty."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1970
+msgid "We could not claim the order because the backend is unaware of it."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1976
+msgid "We could not claim the order because someone else claimed it first."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1982
+msgid "The client-side experienced an internal failure."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1988
+msgid "The backend failed to sign the refund request."
+msgstr ""
+
+#: src/util/taler_error_codes.c:1994
+msgid "The client failed to unblind the signature returned by the merchant."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2000
+msgid "The exchange returned a failure code for the withdraw operation."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2006
+msgid "The merchant failed to add up the amounts to compute the pick up value."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2012
+msgid "The reward expired."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2018
+msgid ""
+"The requested withdraw amount exceeds the amount remaining to be picked up."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2024
+msgid ""
+"The merchant did not find the specified denomination key in the exchange's "
+"key set."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2030
+msgid ""
+"The backend lacks a wire transfer method configuration option for the given "
+"instance. Thus, this instance is unavailable (not findable for creating new "
+"orders)."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2036
+msgid ""
+"The proposal had no timestamp and the backend failed to obtain the local "
+"time. Likely to be an internal error."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2042
+msgid ""
+"The order provided to the backend could not be parsed, some required fields "
+"were missing or ill-formed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2048
+msgid "The backend encountered an error: the proposal already exists."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2054
+msgid ""
+"The request is invalid: the wire deadline is before the refund deadline."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2060
+msgid ""
+"The request is invalid: a delivery date was given, but it is in the past."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2066
+msgid ""
+"The request is invalid: the wire deadline for the order would be \"never\"."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2072
+msgid ""
+"The request is invalid: a payment deadline was given, but it is in the past."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2078
+msgid ""
+"The request is invalid: a refund deadline was given, but it is in the past."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2084
+msgid ""
+"The backend does not trust any exchange that would allow funds to be wired "
+"to any bank account of this instance using the selected wire method. Note "
+"that right now, we do not support the use of exchange bank accounts with "
+"mandatory currency conversion."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2090
+msgid "One of the paths to forget is malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2096
+msgid "One of the paths to forget was not marked as forgettable."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2102
+msgid ""
+"The order provided to the backend could not be deleted, our offer is still "
+"valid and awaiting payment."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2108
+msgid ""
+"The order provided to the backend could not be deleted as the order was "
+"already paid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2114
+msgid ""
+"The amount to be refunded is inconsistent: either is lower than the previous "
+"amount being awarded, or it is too big to be paid back. In this second case, "
+"the fault stays on the business dept. side."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2120
+msgid "The frontend gave an unpaid order id to issue the refund to."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2126
+msgid ""
+"The refund delay was set to 0 and thus no refunds are allowed for this order."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2132
+msgid "The exchange says it does not know this transfer."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2138
+msgid "We internally failed to execute the /track/transfer request."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2144 src/util/taler_error_codes.c:2222
+msgid ""
+"The amount transferred differs between what was submitted and what the "
+"exchange claimed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2150
+msgid ""
+"The exchange gave conflicting information about a coin which has been wire "
+"transferred."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2156
+msgid ""
+"The exchange charged a different wire fee than what it originally "
+"advertised, and it is higher."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2162
+msgid "We did not find the account that the transfer was made to."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2168
+msgid ""
+"The backend could not delete the transfer as the echange already replied to "
+"our inquiry about it and we have integrated the result."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2174
+msgid ""
+"The backend was previously informed about a wire transfer with the same ID "
+"but a different amount. Multiple wire transfers with the same ID are not "
+"allowed. If the new amount is correct, the old transfer should first be "
+"deleted."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2180
+msgid ""
+"We are waiting for the exchange to provide us with key material before "
+"checking the wire transfer."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2186
+msgid ""
+"We are waiting for the exchange to provide us with the list of aggregated "
+"transactions."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2192
+msgid ""
+"The endpoint indicated in the wire transfer does not belong to a GNU Taler "
+"exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2198
+msgid ""
+"The exchange indicated in the wire transfer claims to know nothing about the "
+"wire transfer."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2204
+msgid "The interaction with the exchange is delayed due to rate limiting."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2210
+msgid ""
+"We experienced a transient failure in our interaction with the exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2216
+msgid ""
+"The response from the exchange was unacceptable and should be reviewed with "
+"an auditor."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2228
+msgid ""
+"The merchant backend cannot create an instance under the given identifier as "
+"one already exists. Use PATCH to modify the existing entry."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2234
+msgid ""
+"The merchant backend cannot create an instance because the authentication "
+"configuration field is malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2240
+msgid ""
+"The merchant backend cannot update an instance's authentication settings "
+"because the provided authentication settings are malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2246
+msgid ""
+"The merchant backend cannot create an instance under the given identifier, "
+"the previous one was deleted but must be purged first."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2252
+msgid ""
+"The merchant backend cannot update an instance under the given identifier, "
+"the previous one was deleted but must be purged first."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2258 src/util/taler_error_codes.c:2444
+msgid "The bank account referenced in the requested operation was not found."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2264
+msgid ""
+"The bank account specified in the request already exists at the merchant."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2270
+msgid "The product ID exists."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2276
+msgid ""
+"The update would have reduced the total amount of product lost, which is not "
+"allowed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2282
+msgid ""
+"The update would have mean that more stocks were lost than what remains from "
+"total inventory after sales, which is not allowed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2288
+msgid ""
+"The update would have reduced the total amount of product in stock, which is "
+"not allowed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2294
+msgid ""
+"The update would have reduced the total amount of product sold, which is not "
+"allowed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2300
+msgid ""
+"The lock request is for more products than we have left (unlocked) in stock."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2306
+msgid "The deletion request is for a product that is locked."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2312
+msgid "The requested wire method is not supported by the exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2318
+msgid "The requested exchange does not allow rewards."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2324
+msgid "The reserve could not be deleted because it is unknown."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2330
+msgid "The reserve that was used to fund the rewards has expired."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2336
+msgid "The reserve that was used to fund the rewards was not found in the DB."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2342
+msgid ""
+"The backend knows the instance that was supposed to support the reward, and "
+"it was configured for rewardping. However, the funds remaining are "
+"insufficient to cover the reward, and the merchant should top up the reserve."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2348
+msgid "The backend failed to find a reserve needed to authorize the reward."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2354
+msgid ""
+"The merchant backend encountered a failure in computing the deposit total."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2360
+msgid "The template ID already exists."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2366
+msgid "The OTP device ID already exists."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2372
+msgid ""
+"Amount given in the using template and in the template contract. There is a "
+"conflict."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2378
+msgid ""
+"Subject given in the using template and in the template contract. There is a "
+"conflict."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2384
+msgid ""
+"Amount not given in the using template and in the template contract. There "
+"is a conflict."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2390
+msgid ""
+"Subject not given in the using template and in the template contract. There "
+"is a conflict."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2396
+msgid "The webhook ID elready exists."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2402
+msgid "The webhook serial elready exists."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2408
+msgid "The signature from the exchange on the deposit confirmation is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2414
+msgid ""
+"The exchange key used for the signature on the deposit confirmation was "
+"revoked."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2420
+msgid ""
+"Wire transfer attempted with credit and debit party being the same bank "
+"account."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2426
+msgid ""
+"Wire transfer impossible, due to financial limitation of the party that "
+"attempted the payment."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2432
+msgid ""
+"Negative numbers are not allowed (as value and/or fraction) to instantiate "
+"an amount object."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2438
+msgid ""
+"A too big number was used (as value and/or fraction) to instantiate an "
+"amount object."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2450
+msgid ""
+"The transaction referenced in the requested operation (typically a reject "
+"operation), was not found."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2456
+msgid "Bank received a malformed amount string."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2462
+msgid ""
+"The client does not own the account credited by the transaction which is to "
+"be rejected, so it has no rights do reject it."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2468
+msgid ""
+"This error code is returned when no known exception types captured the "
+"exception."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2474
+msgid ""
+"This error code is used for all those exceptions that do not really need a "
+"specific error code to return to the client. Used for example when a client "
+"is trying to register with a unavailable username."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2480
+msgid ""
+"The request UID for a request to transfer funds has already been used, but "
+"with different details for the transfer."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2486
+msgid ""
+"The withdrawal operation already has a reserve selected. The current "
+"request conflicts with the existing selection."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2492
+msgid ""
+"The wire transfer subject duplicates an existing reserve public key. But "
+"wire transfer subjects must be unique."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2498
+msgid ""
+"The client requested a transaction that is so far in the past, that it has "
+"been forgotten by the bank."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2504
+msgid "The client attempted to abort a transaction that was already confirmed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2510
+msgid "The client attempted to confirm a transaction that was already aborted."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2516
+msgid "The client attempted to register an account with the same name."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2522
+msgid ""
+"The client attempted to confirm a withdrawal operation before the wallet "
+"posted the required details."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2528
+msgid ""
+"The client tried to register a new account under a reserved username (like "
+"'admin' for example)."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2534
+msgid ""
+"The client tried to register a new account with an username already in use."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2540
+msgid ""
+"The client tried to register a new account with a payto:// URI already in "
+"use."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2546
+msgid "The client tried to delete an account with a non null balance."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2552
+msgid ""
+"The client tried to create a transaction or an operation that credit an "
+"unknown account."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2558
+msgid ""
+"The client tried to create a transaction or an operation that debit an "
+"unknown account."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2564
+msgid "The client tried to perform an action prohibited for exchange accounts."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2570
+msgid "The client tried to perform an action reserved for exchange accounts."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2576
+msgid "Received currency conversion is wrong."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2582
+msgid ""
+"The account referenced in this operation is missing tan info for the chosen "
+"channel."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2588
+msgid "The client attempted to confirm a transaction with incomplete info."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2594 src/util/taler_error_codes.c:3062
+msgid ""
+"The request rate is too high. The server is refusing requests to guard "
+"against brute-force attacks."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2600
+msgid "This TAN channel is not supported."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2606
+msgid ""
+"Failed to send TAN using the helper script. Either script is not found, or "
+"script timeout, or script terminated with a non-successful result."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2612 src/util/taler_error_codes.c:3008
+msgid "The client's response to the challenge was invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2618
+msgid "A non-admin user has tried to change their legal name."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2624
+msgid "A non-admin user has tried to change their debt limit."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2630
+msgid ""
+"A non-admin user has tried to change their password whihout providing the "
+"current one."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2636
+msgid "Provided old password does not match current password."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2642
+msgid "An admin user has tried to become an exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2648
+msgid "The sync service failed find the account in its database."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2654
+msgid "The SHA-512 hash provided in the If-None-Match header is malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2660
+msgid ""
+"The SHA-512 hash provided in the If-Match header is malformed or missing."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2666
+msgid ""
+"The signature provided in the \"Sync-Signature\" header is malformed or "
+"missing."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2672
+msgid ""
+"The signature provided in the \"Sync-Signature\" header does not match the "
+"account, old or new Etags."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2678
+msgid "The \"Content-length\" field for the upload is not a number."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2684
+msgid ""
+"The \"Content-length\" field for the upload is too big based on the server's "
+"terms of service."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2690 src/util/taler_error_codes.c:3170
+msgid ""
+"The server is out of memory to handle the upload. Trying again later may "
+"succeed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2696 src/util/taler_error_codes.c:3188
+msgid "The uploaded data does not match the Etag."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2702 src/util/taler_error_codes.c:2984
+msgid "HTTP server experienced a timeout while awaiting promised payment."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2708
+msgid "Sync could not setup the payment request with its own backend."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2714
+msgid "The sync service failed find the backup to be updated in its database."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2720 src/util/taler_error_codes.c:2948
+msgid "The \"Content-length\" field for the upload is missing."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2726
+msgid "Sync had problems communicating with its payment backend."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2732
+msgid "Sync experienced a timeout communicating with its payment backend."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2738
+msgid ""
+"The wallet does not implement a version of the exchange protocol that is "
+"compatible with the protocol version of the exchange."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2744
+msgid ""
+"The wallet encountered an unexpected exception. This is likely a bug in the "
+"wallet implementation."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2750
+msgid ""
+"The wallet received a response from a server, but the response can't be "
+"parsed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2756
+msgid ""
+"The wallet tried to make a network request, but it received no response."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2762
+msgid "The wallet tried to make a network request, but it was throttled."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2768
+msgid ""
+"The wallet made a request to a service, but received an error response it "
+"does not know how to handle."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2774
+msgid ""
+"The denominations offered by the exchange are insufficient. Likely the "
+"exchange is badly configured or not maintained."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2780
+msgid "The wallet does not support the operation requested by a client."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2786
+msgid "The given taler://pay URI is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2792
+msgid ""
+"The signature on a coin by the exchange's denomination key is invalid after "
+"unblinding it."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2798
+msgid ""
+"The exchange does not know about the reserve (yet), and thus withdrawal "
+"can't progress."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2804
+msgid "The wallet core service is not available."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2810
+msgid ""
+"The bank has aborted a withdrawal operation, and thus a withdrawal can't "
+"complete."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2816
+msgid "An HTTP request made by the wallet timed out."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2822
+msgid "The order has already been claimed by another wallet."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2828
+msgid ""
+"A group of withdrawal operations (typically for the same reserve at the same "
+"exchange) has errors and will be tried again later."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2834
+msgid ""
+"The signature on a coin by the exchange's denomination key (obtained through "
+"the merchant via a reward) is invalid after unblinding it."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2840
+msgid ""
+"The wallet does not implement a version of the bank integration API that is "
+"compatible with the version offered by the bank."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2846
+msgid ""
+"The wallet processed a taler://pay URI, but the merchant base URL in the "
+"downloaded contract terms does not match the merchant base URL derived from "
+"the URI."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2852
+msgid "The merchant's signature on the contract terms is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2858
+msgid "The contract terms given by the merchant are malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2864
+msgid "A pending operation failed, and thus the request can't be completed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2870
+msgid ""
+"A payment was attempted, but the merchant had an internal server error (5xx)."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2876
+msgid "The crypto worker failed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2882
+msgid "The crypto worker received a bad request."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2888
+msgid "A KYC step is required before withdrawal can proceed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2894
+msgid "The wallet does not have sufficient balance to create a deposit group."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2900
+msgid ""
+"The wallet does not have sufficient balance to create a peer push payment."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2906
+msgid "The wallet does not have sufficient balance to pay for an invoice."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2912
+msgid "A group of refresh operations has errors and will be tried again later."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2918
+msgid ""
+"The exchange's self-reported base URL does not match the one that the wallet "
+"is using."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2924
+msgid "The order has already been paid by another wallet."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2930
+msgid "We encountered a timeout with our payment backend."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2936
+msgid "The backend requested payment, but the request is malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2942
+msgid "The backend got an unexpected reply from the payment processor."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2954
+msgid "The \"Content-length\" field for the upload is malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2960
+msgid "The backend failed to setup an order with the payment processor."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2966
+msgid ""
+"The backend was not authorized to check for payment with the payment "
+"processor."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2972
+msgid "The backend could not check payment status with the payment processor."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2978
+msgid "The Anastasis provider could not be reached."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2990
+msgid "The key share is unknown to the provider."
+msgstr ""
+
+#: src/util/taler_error_codes.c:2996
+msgid ""
+"The authorization method used for the key share is no longer supported by "
+"the provider."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3002
+msgid "The client needs to respond to the challenge."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3014
+msgid ""
+"The backend is not aware of having issued the provided challenge code. "
+"Either this is the wrong code, or it has expired."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3020
+msgid "The backend failed to initiate the authorization process."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3026
+msgid "The authorization succeeded, but the key share is no longer available."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3032
+msgid "The backend forgot the order we asked the client to pay for"
+msgstr ""
+
+#: src/util/taler_error_codes.c:3038
+msgid "The backend itself reported a bad exchange interaction."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3044
+msgid "The backend reported a payment status we did not expect."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3050
+msgid "The backend failed to setup the order for payment."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3056
+msgid "The decryption of the key share failed with the provided key."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3068
+msgid ""
+"A request to issue a challenge is not valid for this authentication method."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3074
+msgid ""
+"The backend failed to store the key share because the UUID is already in use."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3080
+msgid ""
+"The backend failed to store the key share because the authorization method "
+"is not supported."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3086
+msgid "The provided phone number is not an acceptable number."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3092
+msgid "Failed to run the SMS transmission helper process."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3098
+msgid ""
+"Provider failed to send SMS. Helper terminated with a non-successful result."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3104
+msgid "The provided email address is not an acceptable address."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3110
+msgid "Failed to run the E-mail transmission helper process."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3116
+msgid ""
+"Provider failed to send E-mail. Helper terminated with a non-successful "
+"result."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3122
+msgid "The provided postal address is not an acceptable address."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3128
+msgid "Failed to run the mail transmission helper process."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3134
+msgid ""
+"Provider failed to send mail. Helper terminated with a non-successful result."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3140
+msgid "The provided IBAN address is not an acceptable IBAN."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3146
+msgid ""
+"The provider has not yet received the IBAN wire transfer authorizing the "
+"disclosure of the key share."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3152
+msgid "The backend did not find a TOTP key in the data provided."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3158
+msgid ""
+"The key provided does not satisfy the format restrictions for an Anastasis "
+"TOTP key."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3164
+msgid "The given if-none-match header is malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3176
+msgid ""
+"The signature provided in the \"Anastasis-Policy-Signature\" header is "
+"malformed or missing."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3182
+msgid "The given if-match header is malformed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3194
+msgid "The provider is unaware of the requested policy."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3200
+msgid "The given action is invalid for the current state of the reducer."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3206
+msgid "The given state of the reducer is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3212
+msgid "The given input to the reducer is invalid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3218
+msgid ""
+"The selected authentication method does not work for the Anastasis provider."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3224
+msgid "The given input and action do not work for the current state."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3230
+msgid "We experienced an unexpected failure interacting with the backend."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3236
+msgid "The contents of a resource file did not match our expectations."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3242
+msgid "A required resource file is missing."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3248
+msgid "An input did not match the regular expression."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3254
+msgid "An input did not match the custom validation logic."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3260
+msgid ""
+"Our attempts to download the recovery document failed with all providers. "
+"Most likely the personal information you entered differs from the "
+"information you provided during the backup process and you should go back to "
+"the previous step. Alternatively, if you used a backup provider that is "
+"unknown to this application, you should add that provider manually."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3266
+msgid "Anastasis provider reported a fatal failure."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3272
+msgid "Anastasis provider failed to respond to the configuration request."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3278
+msgid ""
+"The policy we downloaded is malformed. Must have been a client error while "
+"creating the backup."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3284
+msgid "We failed to obtain the policy, likely due to a network issue."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3290
+msgid "The recovered secret did not match the required syntax."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3296
+msgid "The challenge data provided is too large for the available providers."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3302
+msgid "The provided core secret is too large for some of the providers."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3308
+msgid "The provider returned in invalid configuration."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3314
+msgid ""
+"The reducer encountered an internal error, likely a bug that needs to be "
+"reported."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3320
+msgid "The reducer already synchronized with all providers."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3326
+msgid ""
+"A generic error happened in the LibEuFin nexus. See the enclose details "
+"JSON for more information."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3332
+msgid "An uncaught exception happened in the LibEuFin nexus service."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3338
+msgid ""
+"A generic error happened in the LibEuFin sandbox. See the enclose details "
+"JSON for more information."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3344
+msgid "An uncaught exception happened in the LibEuFin sandbox service."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3350
+msgid "This validation method is not supported by the service."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3356
+msgid "Number of allowed attempts for initiating a challenge exceeded."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3362
+msgid "The client is unknown or unauthorized."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3368
+msgid "The client is not authorized to use the given redirect URI."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3374
+msgid "The service failed to execute its helper process to send the challenge."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3380
+msgid "The grant is unknown to the service (it could also have expired)."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3386
+msgid "The code given is not even well-formed."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3392
+msgid "The service is not aware of the referenced validation process."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3398
+msgid "The code given is not valid."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3404
+msgid ""
+"Too many attempts have been made, validation is temporarily disabled for "
+"this address."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3410
+msgid "The PIN code provided is incorrect."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3416
+msgid ""
+"The token cannot be valid as no address was ever provided by the client."
+msgstr ""
+
+#: src/util/taler_error_codes.c:3422
+msgid "End of error code range."
+msgstr ""
diff --git a/src/testing/donau-unified-setup.sh
b/src/testing/donau-unified-setup.sh
index 331fe04..788c61a 100755
--- a/src/testing/donau-unified-setup.sh
+++ b/src/testing/donau-unified-setup.sh
@@ -76,7 +76,7 @@ START_BANK=0
START_TRANSFER=0
START_WIREWATCH=0
USE_ACCOUNT="exchange-account-1"
-USE_VALGRIN=""
+USE_VALGRIND=""
WIRE_DOMAIN="x-taler-bank"
CONF_ORIG="$HOME/.config/taler.conf"
LOGLEVEL="DEBUG"
@@ -194,7 +194,7 @@ fi
if [ "1" = "$START_DONAU" ]
then
echo -n "Testing for Donau"
- donau-httpd -h > /dev/null || ext_skip " donau-httpd required"
+ donau-httpd -h > /dev/null || exit_skip " donau-httpd required"
echo " FOUND"
fi
diff --git a/src/util/donau-config b/src/util/donau-config
new file mode 100755
index 0000000..6130710
--- /dev/null
+++ b/src/util/donau-config
@@ -0,0 +1,13 @@
+#!/usr/bin/env bash
+
+set -eu
+
+if ! type gnunet-config >/dev/null; then
+ echo "$0 needs gnunet-config to be installed"
+ exit 1
+fi
+
+GC=`which gnunet-config`
+SO=`ls /usr/local/lib/libdonauutil.so.* | sort -n | tail -n1`
+export LD_PRELOAD=${LD_PRELOAD:-}:${SO}
+exec gnunet-config "$@"
\ No newline at end of file
diff --git a/stamp-h1 b/stamp-h1
new file mode 100644
index 0000000..9b27c7a
--- /dev/null
+++ b/stamp-h1
@@ -0,0 +1 @@
+timestamp for taler_config.h
diff --git a/taler_config.h b/taler_config.h
new file mode 100644
index 0000000..e1b94b0
--- /dev/null
+++ b/taler_config.h
@@ -0,0 +1,331 @@
+/* taler_config.h. Generated from taler_config.h.in by configure. */
+/* taler_config.h.in. Generated from configure.ac by autoheader. */
+
+/* Define to 1 if translation of program messages to the user's native
+ language is requested. */
+#define ENABLE_NLS 1
+
+/* Define to 1 to enable epoll support */
+#define EPOLL_SUPPORT 1
+
+/* Define to cull all logging calls */
+/* #undef GNUNET_CULL_LOGGING */
+
+/* 1 if extra logging is enabled, 2 for very verbose extra logging, 0
+ otherwise */
+#define GNUNET_EXTRA_LOGGING 0
+
+/* Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the
+ CoreFoundation framework. */
+/* #undef HAVE_CFLOCALECOPYCURRENT */
+
+/* Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in
+ the CoreFoundation framework. */
+/* #undef HAVE_CFPREFERENCESCOPYAPPVALUE */
+
+/* Define if the GNU dcgettext() function is already present or preinstalled.
+ */
+#define HAVE_DCGETTEXT 1
+
+/* Define to 1 if you have the declaration of `CURLINFO_TLS_SESSION', and to 0
+ if you don't. */
+#define HAVE_DECL_CURLINFO_TLS_SESSION 1
+
+/* 1 if developer logic is enabled, 0 otherwise */
+#define HAVE_DEVELOPER 1
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#define HAVE_DLFCN_H 1
+
+/* Define if you have epoll_create1 function. */
+#define HAVE_EPOLL_CREATE1 1
+
+/* Define if the GNU gettext() function is already present or preinstalled. */
+#define HAVE_GETTEXT 1
+
+/* Define to 1 if you have the <gnunet/gnunet_curl_lib.h> header file. */
+#define HAVE_GNUNET_GNUNET_CURL_LIB_H 1
+
+/* Define to 1 if you have the <gnunet/gnunet_json_lib.h> header file. */
+#define HAVE_GNUNET_GNUNET_JSON_LIB_H 1
+
+/* Define to 1 if you have the <gnunet/gnunet_pq_lib.h> header file. */
+#define HAVE_GNUNET_GNUNET_PQ_LIB_H 1
+
+/* Define to 1 if you have the <gnunet/gnunet_sq_lib.h> header file. */
+#define HAVE_GNUNET_GNUNET_SQ_LIB_H 1
+
+/* Define to 1 if you have the <gnunet/gnunet_util_lib.h> header file. */
+#define HAVE_GNUNET_GNUNET_UTIL_LIB_H 1
+
+/* Define if you have the iconv() function and it works. */
+/* #undef HAVE_ICONV */
+
+/* Define to 1 if the system has the type `intmax_t'. */
+#define HAVE_INTMAX_T 1
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#define HAVE_INTTYPES_H 1
+
+/* Have libcurl */
+#define HAVE_LIBCURL 1
+
+/* Lacking libgnurl */
+#define HAVE_LIBGNURL 0
+
+/* Define to 1 if you have the <libpq-fe.h> header file. */
+#define HAVE_LIBPQ_FE_H 1
+
+/* Define to 1 if the system has the type 'long long int'. */
+#define HAVE_LONG_LONG_INT 1
+
+/* Define to 1 if you have the <netinet/in.h> header file. */
+#define HAVE_NETINET_IN_H 1
+
+/* Define to 1 if you have the <netinet/ip.h> header file. */
+#define HAVE_NETINET_IP_H 1
+
+/* Define to 1 if Postgres is available */
+#define HAVE_POSTGRESQL 1
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#define HAVE_STDINT_H 1
+
+/* Define to 1 if you have the <stdio.h> header file. */
+#define HAVE_STDIO_H 1
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#define HAVE_STDLIB_H 1
+
+/* Define to 1 if you have the `strdup' function. */
+#define HAVE_STRDUP 1
+
+/* Define to 1 if you have the <strings.h> header file. */
+#define HAVE_STRINGS_H 1
+
+/* Define to 1 if you have the <string.h> header file. */
+#define HAVE_STRING_H 1
+
+/* Define to 1 if you have the <sys/socket.h> header file. */
+#define HAVE_SYS_SOCKET_H 1
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#define HAVE_SYS_STAT_H 1
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#define HAVE_SYS_TYPES_H 1
+
+/* Define to 1 if you have the <sys/un.h> header file. */
+#define HAVE_SYS_UN_H 1
+
+/* Define to 1 if the system has the type `uintmax_t'. */
+#define HAVE_UINTMAX_T 1
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#define HAVE_UNISTD_H 1
+
+/* Define to 1 if the system has the type 'unsigned long long int'. */
+#define HAVE_UNSIGNED_LONG_LONG_INT 1
+
+/* Defined if libcurl supports AsynchDNS */
+#define LIBCURL_FEATURE_ASYNCHDNS 1
+
+/* Defined if libcurl supports IDN */
+#define LIBCURL_FEATURE_IDN 1
+
+/* Defined if libcurl supports IPv6 */
+#define LIBCURL_FEATURE_IPV6 1
+
+/* Defined if libcurl supports KRB4 */
+/* #undef LIBCURL_FEATURE_KRB4 */
+
+/* Defined if libcurl supports libz */
+#define LIBCURL_FEATURE_LIBZ 1
+
+/* Defined if libcurl supports NTLM */
+#define LIBCURL_FEATURE_NTLM 1
+
+/* Defined if libcurl supports SSL */
+#define LIBCURL_FEATURE_SSL 1
+
+/* Defined if libcurl supports SSPI */
+/* #undef LIBCURL_FEATURE_SSPI */
+
+/* Defined if libcurl supports DICT */
+#define LIBCURL_PROTOCOL_DICT 1
+
+/* Defined if libcurl supports FILE */
+#define LIBCURL_PROTOCOL_FILE 1
+
+/* Defined if libcurl supports FTP */
+#define LIBCURL_PROTOCOL_FTP 1
+
+/* Defined if libcurl supports FTPS */
+#define LIBCURL_PROTOCOL_FTPS 1
+
+/* Defined if libcurl supports HTTP */
+#define LIBCURL_PROTOCOL_HTTP 1
+
+/* Defined if libcurl supports HTTPS */
+#define LIBCURL_PROTOCOL_HTTPS 1
+
+/* Defined if libcurl supports IMAP */
+#define LIBCURL_PROTOCOL_IMAP 1
+
+/* Defined if libcurl supports LDAP */
+#define LIBCURL_PROTOCOL_LDAP 1
+
+/* Defined if libcurl supports POP3 */
+#define LIBCURL_PROTOCOL_POP3 1
+
+/* Defined if libcurl supports RTSP */
+#define LIBCURL_PROTOCOL_RTSP 1
+
+/* Defined if libcurl supports SMTP */
+#define LIBCURL_PROTOCOL_SMTP 1
+
+/* Defined if libcurl supports TELNET */
+#define LIBCURL_PROTOCOL_TELNET 1
+
+/* Defined if libcurl supports TFTP */
+#define LIBCURL_PROTOCOL_TFTP 1
+
+/* Defined if libgnurl supports AsynchDNS */
+/* #undef LIBGNURL_FEATURE_ASYNCHDNS */
+
+/* Defined if libgnurl supports IDN */
+/* #undef LIBGNURL_FEATURE_IDN */
+
+/* Defined if libgnurl supports IPv6 */
+/* #undef LIBGNURL_FEATURE_IPV6 */
+
+/* Defined if libgnurl supports KRB4 */
+/* #undef LIBGNURL_FEATURE_KRB4 */
+
+/* Defined if libgnurl supports libz */
+/* #undef LIBGNURL_FEATURE_LIBZ */
+
+/* Defined if libgnurl supports NTLM */
+/* #undef LIBGNURL_FEATURE_NTLM */
+
+/* Defined if libgnurl supports SSL */
+/* #undef LIBGNURL_FEATURE_SSL */
+
+/* Defined if libgnurl supports SSPI */
+/* #undef LIBGNURL_FEATURE_SSPI */
+
+/* Defined if libgnurl supports DICT */
+/* #undef LIBGNURL_PROTOCOL_DICT */
+
+/* Defined if libgnurl supports FILE */
+/* #undef LIBGNURL_PROTOCOL_FILE */
+
+/* Defined if libgnurl supports FTP */
+/* #undef LIBGNURL_PROTOCOL_FTP */
+
+/* Defined if libgnurl supports FTPS */
+/* #undef LIBGNURL_PROTOCOL_FTPS */
+
+/* Defined if libgnurl supports HTTP */
+/* #undef LIBGNURL_PROTOCOL_HTTP */
+
+/* Defined if libgnurl supports HTTPS */
+/* #undef LIBGNURL_PROTOCOL_HTTPS */
+
+/* Defined if libgnurl supports IMAP */
+/* #undef LIBGNURL_PROTOCOL_IMAP */
+
+/* Defined if libgnurl supports LDAP */
+/* #undef LIBGNURL_PROTOCOL_LDAP */
+
+/* Defined if libgnurl supports POP3 */
+/* #undef LIBGNURL_PROTOCOL_POP3 */
+
+/* Defined if libgnurl supports RTSP */
+/* #undef LIBGNURL_PROTOCOL_RTSP */
+
+/* Defined if libgnurl supports SMTP */
+/* #undef LIBGNURL_PROTOCOL_SMTP */
+
+/* Defined if libgnurl supports TELNET */
+/* #undef LIBGNURL_PROTOCOL_TELNET */
+
+/* Defined if libgnurl supports TFTP */
+/* #undef LIBGNURL_PROTOCOL_TFTP */
+
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
+#define LT_OBJDIR ".libs/"
+
+/* minimum version of libgcrypt required */
+#define NEED_LIBGCRYPT_VERSION "1.6.1"
+
+/* Name of package */
+#define PACKAGE "donau"
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT "taler-bug@gnunet.org"
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "donau"
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING "donau 0.9.2"
+
+/* Define to the one symbol short name of this package. */
+#define PACKAGE_TARNAME "donau"
+
+/* Define to the home page for this package. */
+#define PACKAGE_URL ""
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "0.9.2"
+
+/* Define to 1 if all of the C90 standard headers exist (not just the ones
+ required in a freestanding environment). This macro is provided for
+ backward compatibility; new code need not use it. */
+#define STDC_HEADERS 1
+
+/* VCS revision/hash or tarball version */
+#define VCS_VERSION "git-7519e05"
+
+/* Version number of package */
+#define VERSION "0.9.2"
+
+/* Define for Solaris 2.5.1 so the uint32_t typedef from <sys/synch.h>,
+ <pthread.h>, or <semaphore.h> is not used. If the typedef were allowed, the
+ #define below would cause a syntax error. */
+/* #undef _UINT32_T */
+
+/* Define for Solaris 2.5.1 so the uint64_t typedef from <sys/synch.h>,
+ <pthread.h>, or <semaphore.h> is not used. If the typedef were allowed, the
+ #define below would cause a syntax error. */
+/* #undef _UINT64_T */
+
+/* Define curl_free() as free() if our version of curl lacks curl_free. */
+/* #undef curl_free */
+
+/* Define to the widest signed integer type if <stdint.h> and <inttypes.h> do
+ not define. */
+/* #undef intmax_t */
+
+/* Define as a signed integer type capable of holding a process identifier. */
+/* #undef pid_t */
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+/* #undef size_t */
+
+/* Define to the type of an unsigned integer type of width exactly 16 bits if
+ such a type exists and the standard includes do not define it. */
+/* #undef uint16_t */
+
+/* Define to the type of an unsigned integer type of width exactly 32 bits if
+ such a type exists and the standard includes do not define it. */
+/* #undef uint32_t */
+
+/* Define to the type of an unsigned integer type of width exactly 64 bits if
+ such a type exists and the standard includes do not define it. */
+/* #undef uint64_t */
+
+/* Define to the widest unsigned integer type if <stdint.h> and <inttypes.h>
+ do not define. */
+/* #undef uintmax_t */
--
To stop receiving notification emails like this one, please contact
gnunet@gnunet.org.
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [taler-donau] branch master updated: some changes,
gnunet <=