gnunet-svn
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[taler-exchange] branch master updated: towards using taler-unified-setu


From: gnunet
Subject: [taler-exchange] branch master updated: towards using taler-unified-setup in auditor tests
Date: Mon, 10 Jul 2023 23:20:11 +0200

This is an automated email from the git hooks/post-receive script.

grothoff pushed a commit to branch master
in repository exchange.

The following commit(s) were added to refs/heads/master by this push:
     new 43d5e570 towards using taler-unified-setup in auditor tests
43d5e570 is described below

commit 43d5e5707c912509f3678aca52e89231914a73e7
Author: Christian Grothoff <christian@grothoff.org>
AuthorDate: Mon Jul 10 23:20:08 2023 +0200

    towards using taler-unified-setup in auditor tests
---
 src/auditor/Makefile.am                            |   1 +
 src/auditor/generate-auditor-basedb.conf           | 125 ++---
 src/auditor/generate-auditor-basedb.sh             | 456 ++---------------
 src/auditor/generate-revoke-basedb.sh              | 570 +++++----------------
 .../share/taler/exchange-offline/master.priv       |   1 +
 src/auditor/setup.sh                               |  72 +++
 src/auditor/test-auditor.sh                        |  36 +-
 src/testing/taler-unified-setup.sh                 |   4 +-
 8 files changed, 322 insertions(+), 943 deletions(-)

diff --git a/src/auditor/Makefile.am b/src/auditor/Makefile.am
index c19005c7..eb8025a6 100644
--- a/src/auditor/Makefile.am
+++ b/src/auditor/Makefile.am
@@ -218,6 +218,7 @@ EXTRA_DIST = \
   taler-auditor.in \
   taler-helper-auditor-render.py \
   auditor.conf \
+  setup.sh \
   test-sync-in.conf \
   test-sync-out.conf \
   generate-auditor-basedb.sh \
diff --git a/src/auditor/generate-auditor-basedb.conf 
b/src/auditor/generate-auditor-basedb.conf
index 4c34ad05..9cc329c8 100644
--- a/src/auditor/generate-auditor-basedb.conf
+++ b/src/auditor/generate-auditor-basedb.conf
@@ -1,14 +1,27 @@
-[exchange-offline]
-MASTER_PRIV_FILE = auditor-basedb.mpriv
+[PATHS]
+TALER_CACHE_HOME = $TALER_HOME/.cache/taler/
+TALER_CONFIG_HOME = $TALER_HOME/.config/taler/
+TALER_DATA_HOME = $TALER_HOME/.local/share/taler/
+TALER_HOME = ${PWD}/generate_auditordb_home/
 
-[instance-default]
-KEYFILE = ${TALER_DATA_HOME}/merchant/default.priv
-NAME = Merchant Inc.
+[taler]
+CURRENCY = TESTKUDOS
+CURRENCY_ROUND_UNIT = TESTKUDOS:0.01
+
+[exchange]
+MASTER_PUBLIC_KEY = M4FGP18EQFXFGGFQ1AWXHACN2JX0SMVK9CNF6459Z1WG18JSN0BG
+SIGNKEY_DURATION = 4 weeks
+LOOKAHEAD_SIGN = 32 weeks 1 day
+SIGNKEY_LEGAL_DURATION = 4 weeks
+AML_THRESHOLD = TESTKUDOS:1000000
+
+[exchangedb-postgres]
+CONFIG = postgres:///auditor-basedb
 
 [exchange-account-1]
 PAYTO_URI = payto://iban/SANDBOXX/DE989651?receiver-name=Exchange+Company
-enable_debit = yes
-enable_credit = yes
+ENABLE_DEBIT = YES
+ENABLE_CREDIT = YES
 
 [exchange-accountcredentials-1]
 WIRE_GATEWAY_URL = 
http://localhost:8082/facades/test-facade/taler-wire-gateway/
@@ -16,24 +29,38 @@ WIRE_GATEWAY_AUTH_METHOD = basic
 USERNAME = exchange
 PASSWORD = x
 
-[merchant-account-merchant]
-PAYTO_URI = payto://x-taler-bank/localhost/42
-HONOR_default = YES
-ACTIVE_default = YES
+[merchant]
+WIREFORMAT = default
+DEFAULT_MAX_DEPOSIT_FEE = TESTKUDOS:0.1
+KEYFILE = ${TALER_DATA_HOME}/merchant/merchant.priv
+DEFAULT_MAX_WIRE_FEE = TESTKUDOS:0.10
+WIRE_TRANSFER_DELAY = 1 minute
+FORCE_AUDIT = YES
+
+[merchantdb-postgres]
+CONFIG = postgres:///auditor-basedb
 
 [merchant-exchange-default]
-MASTER_KEY = RKNMPRGXCX35H11WEYXDXYHPR7NX2QK9BG15MT0QEF75PC5KR470
+MASTER_KEY = M4FGP18EQFXFGGFQ1AWXHACN2JX0SMVK9CNF6459Z1WG18JSN0BG
 EXCHANGE_BASE_URL = http://localhost:8081/
 CURRENCY = TESTKUDOS
 
-[payments-generator]
-currency = TESTKUDOS
-instance = default
-bank = http://localhost:8082/
-merchant = http://localhost:9966/
-exchange_admin = http://localhost:18080/
-exchange-admin = http://localhost:18080/
-exchange = http://localhost:8081/
+[bank]
+HTTP_PORT = 8082
+
+[libeufin-nexus]
+DB_CONNECTION="jdbc:postgresql://localhost/auditor-basedb?socketFactory=org.newsclub.net.unix.AFUNIXSocketFactory$FactoryArg&socketFactoryArg=/var/run/postgresql/.s.PGSQL.5432"
+
+[libeufin-sandbox]
+DB_CONNECTION="jdbc:postgresql://localhost/auditor-basedb?socketFactory=org.newsclub.net.unix.AFUNIXSocketFactory$FactoryArg&socketFactoryArg=/var/run/postgresql/.s.PGSQL.5432"
+
+[auditor]
+BASE_URL = http://localhost:8083/
+TINY_AMOUNT = TESTKUDOS:0.01
+PUBLIC_KEY = 0EHPW5WEKHXPPN4MPJNGA7Z6D29JP21GKVNV8ARFB1YW7WWJX20G
+
+[auditordb-postgres]
+CONFIG = postgres:///auditor-basedb
 
 [coin_kudos_ct_1]
 value = TESTKUDOS:0.01
@@ -130,61 +157,3 @@ fee_refresh = TESTKUDOS:0.03
 fee_refund = TESTKUDOS:0.01
 CIPHER = RSA
 rsa_keysize = 1024
-
-[benchmark]
-BANK_DETAILS = bank_details.json
-MERCHANT_DETAILS = merchant_details.json
-
-[arm]
-CONFIG = /research/taler/exchange/src/auditor/auditor-basedb.conf
-
-[taler]
-CURRENCY_ROUND_UNIT = TESTKUDOS:0.01
-CURRENCY = TESTKUDOS
-AML_THRESHOLD = TESTKUDOS:1000000
-
-[merchantdb-postgres]
-CONFIG = postgres:///auditor-basedb
-
-[merchant]
-WIREFORMAT = default
-DEFAULT_MAX_DEPOSIT_FEE = TESTKUDOS:0.1
-KEYFILE = ${TALER_DATA_HOME}/merchant/merchant.priv
-DEFAULT_MAX_WIRE_FEE = TESTKUDOS:0.10
-WIRE_TRANSFER_DELAY = 1 minute
-FORCE_AUDIT = YES
-UNIXPATH = ${TALER_RUNTIME_DIR}/merchant.http
-
-[exchangedb-postgres]
-CONFIG = postgres:///auditor-basedb
-
-[exchange]
-MASTER_PUBLIC_KEY = RKNMPRGXCX35H11WEYXDXYHPR7NX2QK9BG15MT0QEF75PC5KR470
-SIGNKEY_DURATION = 4 weeks
-LOOKAHEAD_SIGN = 32 weeks 1 day
-SIGNKEY_LEGAL_DURATION = 4 weeks
-UNIXPATH = ${TALER_RUNTIME_DIR}/exchange.http
-
-[bank]
-HTTP_PORT = 8082
-SUGGESTED_EXCHANGE = http://localhost:8081/
-SUGGESTED_EXCHANGE_PAYTO = payto://x-taler-bank/localhost/2
-ALLOW_REGISTRATIONS = YES
-SERVE = http
-MAX_DEBT_BANK = TESTKUDOS:100000.0
-MAX_DEBT = TESTKUDOS:50.0
-DATABASE = postgres:///auditor-basedb
-
-[auditordb-postgres]
-CONFIG = postgres:///auditor-basedb
-
-[auditor]
-BASE_URL = http://localhost:8083/
-TINY_AMOUNT = TESTKUDOS:0.01
-PUBLIC_KEY = 0EHPW5WEKHXPPN4MPJNGA7Z6D29JP21GKVNV8ARFB1YW7WWJX20G
-
-[PATHS]
-TALER_CACHE_HOME = $TALER_HOME/.cache/taler/
-TALER_CONFIG_HOME = $TALER_HOME/.config/taler/
-TALER_DATA_HOME = $TALER_HOME/.local/share/taler/
-TALER_HOME = ${PWD}/generate_auditordb_home/
diff --git a/src/auditor/generate-auditor-basedb.sh 
b/src/auditor/generate-auditor-basedb.sh
index 95fc2216..2dc2b2a4 100755
--- a/src/auditor/generate-auditor-basedb.sh
+++ b/src/auditor/generate-auditor-basedb.sh
@@ -1,412 +1,61 @@
 #!/bin/bash
-# Script to generate the basic database for auditor
-# testing from a 'correct' interaction between exchange,
-# wallet and merchant.
+# This file is in the public domain.
 #
-# Creates $BASEDB.sql, $BASEDB.fees,
-# $BASEDB.{mpub,mpriv}.
-# Default $BASEDB is "auditor-basedb", override via $1.
+# Script to generate the basic database for auditor testing from a 'correct'
+# interaction between exchange, wallet and merchant.
 #
-# Currently must be run online as it interacts with
-# bank.test.taler.net; also requires the wallet CLI
-# to be installed and in the path.  Furthermore, the
-# user running this script must be Postgres superuser
-# and be allowed to create/drop databases.
+# Creates "$1.sql".
+#
+# Requires the wallet CLI to be installed and in the path.  Furthermore, the
+# user running this script must be Postgres superuser and be allowed to
+# create/drop databases.
 #
 set -eu
-#set -x
-
-# Cleanup to run whenever we exit
-function exit_cleanup()
-{
-    echo "Running generate-auditor-basedb exit cleanup logic..."
-    if test -f ${MY_TMP_DIR:-/}/libeufin-sandbox.pid
-    then
-        PID=`cat ${MY_TMP_DIR}/libeufin-sandbox.pid 2> /dev/null`
-        kill $PID 2> /dev/null || true
-        rm ${MY_TMP_DIR}/libeufin-sandbox.pid
-        echo "Killed libeufin sandbox $PID"
-        wait $PID || true
-    fi
-    if test -f ${MY_TMP_DIR:-/}/libeufin-nexus.pid
-    then
-        PID=`cat ${MY_TMP_DIR}/libeufin-nexus.pid 2> /dev/null`
-        kill $PID 2> /dev/null || true
-        rm ${MY_TMP_DIR}/libeufin-nexus.pid
-        echo "Killed libeufin nexus $PID"
-        wait $PID || true
-    fi
-    echo "killing libeufin DONE"
-    for n in `jobs -p`
-    do
-        kill $n 2> /dev/null || true
-    done
-    wait || true
-}
-
-# Install cleanup handler (except for kill -9)
-trap exit_cleanup EXIT
 
-
-# Exit, with status code "skip" (no 'real' failure)
-function exit_skip() {
-    echo "SKIPPING: $1"
-    exit 77
-}
 # Where do we write the result?
-BASEDB=${1:-"auditor-basedb"}
-# Name of the Postgres database we will use for the script.
-# Will be dropped, do NOT use anything that might be used
-# elsewhere
-export TARGET_DB=`basename ${BASEDB}`
-
-export WALLET_DB=${BASEDB:-"wallet"}.wdb
+BASEDB="$1"
 
-# delete existing wallet database
-rm -f $WALLET_DB
+. setup.sh
 
-# Configuration file will be edited, so we create one
-# from the template.
-export CONF=$1.conf
-cp generate-auditor-basedb.conf $CONF
-echo "Created configuration at ${CONF}"
-DATA_DIR=$1/exchange-data-dir/
-mkdir -p $DATA_DIR
-taler-config -c $CONF -s PATHS -o TALER_HOME -V $DATA_DIR
-
-echo -n "Testing for libeufin"
-libeufin-cli --help >/dev/null </dev/null || exit_skip " MISSING"
-echo " FOUND"
-echo -n "Testing for taler-wallet-cli"
-taler-wallet-cli -v >/dev/null </dev/null || exit_skip " MISSING"
-echo " FOUND"
-echo -n "Testing for curl"
+echo -n "Testing for curl ..."
 curl --help >/dev/null </dev/null || exit_skip " MISSING"
 echo " FOUND"
 
-# reset database
-dropdb $TARGET_DB >/dev/null 2>/dev/null || true
-createdb $TARGET_DB || exit_skip "Could not create database $TARGET_DB"
-ORIGIN=`pwd`
-MY_TMP_DIR=`dirname $1`
-
-# obtain key configuration data
-MASTER_PRIV_FILE=$1.mpriv
-MASTER_PRIV_DIR=`dirname $MASTER_PRIV_FILE`
-taler-config -f -c ${CONF} -s exchange-offline -o MASTER_PRIV_FILE -V 
${MASTER_PRIV_FILE}
-rm -f "${MASTER_PRIV_FILE}"
-mkdir -p $MASTER_PRIV_DIR
-gnunet-ecc -l/dev/null -g1 $MASTER_PRIV_FILE > /dev/null
-export MASTER_PUB=`gnunet-ecc -p $MASTER_PRIV_FILE`
-export EXCHANGE_URL=`taler-config -c $CONF -s EXCHANGE -o BASE_URL`
-MERCHANT_PORT=`taler-config -c $CONF -s MERCHANT -o PORT`
-export MERCHANT_URL=http://localhost:${MERCHANT_PORT}/
-BANK_PORT=`taler-config -c $CONF -s BANK -o HTTP_PORT`
-BANK_URL="http://localhost:1${BANK_PORT}";
-export AUDITOR_URL=http://localhost:8083/
-AUDITOR_PRIV_FILE=$1.apriv
-AUDITOR_PRIV_DIR=`dirname $AUDITOR_PRIV_FILE`
-taler-config -f -c ${CONF} -s auditor -o AUDITOR_PRIV_FILE -V 
${AUDITOR_PRIV_FILE}
-mkdir -p $AUDITOR_PRIV_DIR
-gnunet-ecc -l/dev/null -g1 $AUDITOR_PRIV_FILE > /dev/null
-AUDITOR_PUB=`gnunet-ecc -p $AUDITOR_PRIV_FILE`
-
-echo "MASTER PUB is ${MASTER_PUB} using file ${MASTER_PRIV_FILE}"
-echo "AUDITOR PUB is ${AUDITOR_PUB} using file ${AUDITOR_PRIV_FILE}"
-
-# patch configuration
-taler-config -c $CONF -s exchange -o MASTER_PUBLIC_KEY -V $MASTER_PUB
-taler-config -c $CONF -s auditor -o PUBLIC_KEY -V $AUDITOR_PUB
-taler-config -c $CONF -s merchant-exchange-default -o MASTER_KEY -V $MASTER_PUB
-
-taler-config -c $CONF -s exchangedb-postgres -o CONFIG -V 
postgres:///$TARGET_DB
-taler-config -c $CONF -s auditordb-postgres -o CONFIG -V postgres:///$TARGET_DB
-taler-config -c $CONF -s merchantdb-postgres -o CONFIG -V 
postgres:///$TARGET_DB
-taler-config -c $CONF -s bank -o database -V postgres:///$TARGET_DB
-
-# setup exchange
-echo "Setting up exchange"
-taler-exchange-dbinit -c $CONF
-
-echo "Setting up merchant"
-taler-merchant-dbinit -c $CONF
-
-# setup auditor
-echo "Setting up auditor"
-taler-auditor-dbinit -c $CONF || exit_skip "Failed to initialize auditor DB"
-taler-auditor-exchange -c $CONF -m $MASTER_PUB -u $EXCHANGE_URL || exit_skip 
"Failed to add exchange to auditor"
-
-# Launch services
-echo "Launching services (pre audit DB: $TARGET_DB)"
-
-rm -rf ${TARGET_DB}-sandbox.sqlite3
-export 
LIBEUFIN_SANDBOX_DB_CONNECTION="jdbc:sqlite:${TARGET_DB}-sandbox.sqlite3"
-# Create the default demobank.
-cd $MY_TMP_DIR
-export LIBEUFIN_SANDBOX_ADMIN_PASSWORD=secret
-libeufin-sandbox config --currency "TESTKUDOS" default
-libeufin-sandbox serve --port "1${BANK_PORT}" \
-  > ${MY_TMP_DIR}/libeufin-sandbox-stdout.log \
-  2> ${MY_TMP_DIR}/libeufin-sandbox-stderr.log &
-echo $! > ${MY_TMP_DIR}/libeufin-sandbox.pid
-cd $ORIGIN
-export LIBEUFIN_SANDBOX_URL="http://localhost:1${BANK_PORT}";
-set +e
-echo -n "Waiting for Sandbox..."
-OK=0
-for n in `seq 1 100`; do
-  echo -n "."
-  sleep 1
-  if wget --timeout=1 \
-    --user admin --password secret --auth-no-challenge \
-    --tries=3 --waitretry=0 \
-    -o /dev/null -O /dev/null \
-    ${LIBEUFIN_SANDBOX_URL};
-  then
-    OK=1
-    break
-  fi
-done
-if test $OK != 1
-then
-    exit_skip " Failed to launch sandbox"
-fi
-echo "OK"
-
-register_sandbox_account() {
-    export LIBEUFIN_SANDBOX_USERNAME=$1
-    export LIBEUFIN_SANDBOX_PASSWORD=$2
-    cd $MY_TMP_DIR
-    libeufin-cli sandbox \
-      demobank \
-      register --name "$3"
-    cd $ORIGIN
-    unset LIBEUFIN_SANDBOX_USERNAME
-    unset LIBEUFIN_SANDBOX_PASSWORD
-}
-set -e
-echo -n "Register the 'fortytwo' Sandbox user.."
-register_sandbox_account fortytwo x "Forty Two"
-echo OK
-echo -n "Register the 'fortythree' Sandbox user.."
-register_sandbox_account fortythree x "Forty Three"
-echo OK
-echo -n "Register 'exchange' Sandbox user.."
-register_sandbox_account exchange x "Exchange Company"
-echo OK
-echo -n "Specify exchange's PAYTO_URI in the config ..."
-export LIBEUFIN_SANDBOX_USERNAME=exchange
-export LIBEUFIN_SANDBOX_PASSWORD=x
-cd $MY_TMP_DIR
-PAYTO=`libeufin-cli sandbox demobank info --bank-account exchange | jq 
--raw-output '.paytoUri'`
-taler-config -c $CONF -s exchange-account-1 -o PAYTO_URI -V $PAYTO
-echo " OK"
-echo -n "Setting this exchange as the bank's default ..."
-EXCHANGE_PAYTO=`libeufin-cli sandbox demobank info --bank-account exchange | 
jq --raw-output '.paytoUri'`
-libeufin-sandbox default-exchange "$EXCHANGE_URL" "$EXCHANGE_PAYTO"
-echo " OK"
-# Prepare EBICS: create Ebics host and Exchange subscriber.
-# Shortly becoming admin to setup Ebics.
-export LIBEUFIN_SANDBOX_USERNAME=admin
-export LIBEUFIN_SANDBOX_PASSWORD=secret
-echo -n "Create EBICS host at Sandbox.."
-libeufin-cli sandbox \
-  --sandbox-url "http://localhost:1${BANK_PORT}"; \
-  ebicshost create --host-id "talerebics"
-echo "OK"
-echo -n "Create exchange EBICS subscriber at Sandbox.."
-libeufin-cli sandbox \
-  demobank new-ebicssubscriber --host-id talerebics \
-  --user-id exchangeebics --partner-id talerpartner \
-  --bank-account exchange # that's a username _and_ a bank account name
-echo "OK"
-unset LIBEUFIN_SANDBOX_USERNAME
-unset LIBEUFIN_SANDBOX_PASSWORD
-# Prepare Nexus, which is the side actually talking
-# to the exchange.
-rm -rf ${TARGET_DB}-nexus.sqlite3
-export LIBEUFIN_NEXUS_DB_CONNECTION="jdbc:sqlite:${TARGET_DB}-nexus.sqlite3"
-# For convenience, username and password are
-# identical to those used at the Sandbox.
-echo -n "Create exchange Nexus user..."
-libeufin-nexus superuser exchange --password x
-echo " OK"
-libeufin-nexus serve --port ${BANK_PORT} \
-  2> ${MY_TMP_DIR}/libeufin-nexus-stderr.log \
-  > ${MY_TMP_DIR}/libeufin-nexus-stdout.log &
-echo $! > ${MY_TMP_DIR}/libeufin-nexus.pid
-export LIBEUFIN_NEXUS_URL="http://localhost:${BANK_PORT}";
-echo -n "Waiting for Nexus..."
-set +e
-OK=0
-for n in `seq 1 50`; do
-  echo -n "."
-  sleep 1
-  if wget --timeout=1 \
-    --tries=3 --waitretry=0 \
-    -o /dev/null -O /dev/null \
-    $LIBEUFIN_NEXUS_URL;
-  then
-    OK=1
-    break
-  fi
-done
-if test $OK != 1
-then
-    exit_skip " Failed to launch Nexus at $LIBEUFIN_NEXUS_URL"
-fi
-set -e
-echo "OK"
-export LIBEUFIN_NEXUS_USERNAME=exchange
-export LIBEUFIN_NEXUS_PASSWORD=x
-echo -n "Creating an EBICS connection at Nexus..."
-libeufin-cli connections new-ebics-connection \
-  --ebics-url "http://localhost:1${BANK_PORT}/ebicsweb"; \
-  --host-id "talerebics" \
-  --partner-id "talerpartner" \
-  --ebics-user-id "exchangeebics" \
-  talerconn
-echo "OK"
-echo -n "Setup EBICS keying..."
-libeufin-cli connections connect "talerconn" > /dev/null
-echo "OK"
-echo -n "Download bank account name from Sandbox..."
-libeufin-cli connections download-bank-accounts "talerconn"
-echo "OK"
-echo -n "Importing bank account info into Nexus..."
-libeufin-cli connections import-bank-account \
-  --offered-account-id "exchange" \
-  --nexus-bank-account-id "exchange-nexus" \
-  "talerconn"
-echo "OK"
-echo -n "Setup payments submission task..."
-# Tries every second.
-libeufin-cli accounts task-schedule \
-  --task-type submit \
-  --task-name "exchange-payments" \
-  --task-cronspec "* * *" \
-  "exchange-nexus"
-echo "OK"
-# Tries every second.  Ask C52
-echo -n "Setup history fetch task..."
-libeufin-cli accounts task-schedule \
-  --task-type fetch \
-  --task-name "exchange-history" \
-  --task-cronspec "* * *" \
-  --task-param-level report \
-  --task-param-range-type latest \
-  "exchange-nexus"
-echo "OK"
-# create Taler facade.
-echo -n "Create the Taler facade at Nexus..."
-libeufin-cli facades \
-  new-taler-wire-gateway-facade \
-  --currency "TESTKUDOS" --facade-name "test-facade" \
-  "talerconn" "exchange-nexus"
-echo "OK"
-cd $ORIGIN
-# Facade schema: 
http://localhost:$BANK_PORT/facades/test-facade/taler-wire-gateway/
-
-
-TFN=`which taler-exchange-httpd`
-TBINPFX=`dirname $TFN`
-TLIBEXEC=${TBINPFX}/../lib/taler/libexec/
-taler-exchange-secmod-eddsa -c $CONF 2> 
${MY_TMP_DIR}/taler-exchange-secmod-eddsa.log &
-taler-exchange-secmod-rsa -c $CONF 2> 
${MY_TMP_DIR}/taler-exchange-secmod-rsa.log &
-taler-exchange-secmod-cs -c $CONF 2> 
${MY_TMP_DIR}/taler-exchange-secmod-cs.log &
-taler-exchange-httpd -c $CONF 2> ${MY_TMP_DIR}/taler-exchange-httpd.log &
-taler-merchant-httpd -c $CONF -L INFO 2> 
${MY_TMP_DIR}/taler-merchant-httpd.log &
-taler-exchange-wirewatch -c $CONF 2> 
${MY_TMP_DIR}/taler-exchange-wirewatch.log &
-taler-auditor-httpd -L INFO -c $CONF 2> ${MY_TMP_DIR}/taler-auditor-httpd.log &
-export BANK_PORT
-export EXCHANGE_URL
-export MERCHANT_URL
-export AUDITOR_URL
-
-echo -n "Waiting for services to be available "
-# Wait for all bank to be available (usually the slowest)
-for n in `seq 1 50`
-do
-    echo -n "."
-    sleep 0.2
-    OK=0
-    # bank
-    wget http://localhost:${BANK_PORT}/ -o /dev/null -O /dev/null >/dev/null 
|| continue
-    OK=1
-    break
-done
-
-if [ 1 != $OK ]
-then
-    exit_skip "Failed to launch services (bank)"
-fi
-
-# Wait for all services to be available
-for n in `seq 1 50`
-do
-    echo -n "."
-    sleep 0.1
-    OK=0
-    # exchange
-    wget ${EXCHANGE_URL}seed -o /dev/null -O /dev/null >/dev/null || continue
-    # merchant
-    wget ${MERCHANT_URL} -o /dev/null -O /dev/null >/dev/null || continue
-    # Auditor
-    wget ${AUDITOR_URL} -o /dev/null -O /dev/null >/dev/null || continue
-    OK=1
-    break
-done
-
-if [ 1 != $OK ]
-then
-    bash
-    exit_skip "Failed to launch services (Taler)"
-fi
-echo -n "Setting up keys"
-taler-exchange-offline -c $CONF \
-  download sign \
-  enable-account `taler-config -c $CONF -s exchange-account-1 -o PAYTO_URI` \
-  enable-auditor $AUDITOR_PUB $AUDITOR_URL "TESTKUDOS Auditor" \
-  wire-fee now iban TESTKUDOS:0.07 TESTKUDOS:0.01 \
-  global-fee now TESTKUDOS:0.01 TESTKUDOS:0.01 TESTKUDOS:0.01 1h 1year 5 \
-  upload &> ${MY_TMP_DIR}/taler-exchange-offline.log
-
-echo -n "."
-
-for n in `seq 1 2`
-do
-    echo -n "."
-    OK=0
-    wget --timeout=1 http://localhost:8081/keys -o /dev/null -O /dev/null 
>/dev/null || continue
-    OK=1
-    break
-done
-
-if [ 1 != $OK ]
-then
-    exit_skip "Failed to setup keys"
-fi
-
-echo " DONE"
-echo -n "Adding auditor signatures ..."
-
-taler-auditor-offline -c $CONF \
-  download sign upload &> ${MY_TMP_DIR}/taler-auditor-offline.log
+CONF="generate-auditor-basedb.conf"
 
+# reset database
+echo -n "Reset 'auditor-basedb' database ..."
+dropdb "auditor-basedb" >/dev/null 2>/dev/null || true
+createdb "auditor-basedb" || exit_skip "Could not create database '$BASEDB'"
 echo " DONE"
-# Setup merchant
-
-echo -n "Setting up merchant"
 
-curl -H "Content-Type: application/json" -X POST -d 
'{"auth":{"method":"external"},"accounts":[{"payto_uri":"payto://iban/SANDBOXX/DE474361?receiver-name=Merchant43"}],"id":"default","name":"default","address":{},"jurisdiction":{},"default_max_wire_fee":"TESTKUDOS:1",
 
"default_max_deposit_fee":"TESTKUDOS:1","default_wire_fee_amortization":1,"default_wire_transfer_delay":{"d_us"
 : 3600000000},"default_pay_delay":{"d_us": 3600000000}}' 
http://localhost:9966/management/instances
+# Launch exchange, merchant and bank.
+setup -c "$CONF" \
+      -aenmsw \
+      -d "iban"
 
+# obtain key configuration data
+EXCHANGE_URL=$(taler-config -c "$CONF" -s EXCHANGE -o BASE_URL)
+MERCHANT_PORT=$(taler-config -c "$CONF" -s MERCHANT -o PORT)
+MERCHANT_URL="http://localhost:${MERCHANT_PORT}/";
+BANK_PORT=$(taler-config -c "$CONF" -s BANK -o HTTP_PORT)
+BANK_URL="http://localhost:1${BANK_PORT}";
 
+echo -n "Setting up merchant ..."
+curl -H "Content-Type: application/json" -X POST -d 
'{"auth":{"method":"external"},"accounts":[{"payto_uri":"payto://iban/SANDBOXX/DE474361?receiver-name=Merchant43"}],"id":"default","name":"default","address":{},"jurisdiction":{},"default_max_wire_fee":"TESTKUDOS:1",
 
"default_max_deposit_fee":"TESTKUDOS:1","default_wire_fee_amortization":1,"default_wire_transfer_delay":{"d_us"
 : 3600000000},"default_pay_delay":{"d_us": 3600000000}}' 
"${MERCHANT_URL}management/instances"
 echo " DONE"
 
-# run wallet CLI
-echo "Running wallet"
-
-taler-wallet-cli --no-throttle --wallet-db=$WALLET_DB api --expect-success 
'runIntegrationTest' \
+# delete existing wallet database
+export WALLET_DB="wallet.wdb"
+rm -f "$WALLET_DB"
+
+echo -n "Running wallet ..."
+taler-wallet-cli \
+    --no-throttle \
+    --wallet-db="$WALLET_DB" \
+    api \
+    --expect-success \
+    'runIntegrationTest' \
   "$(jq -n '
     {
       amountToSpend: "TESTKUDOS:4",
@@ -418,28 +67,25 @@ taler-wallet-cli --no-throttle --wallet-db=$WALLET_DB api 
--expect-success 'runI
     --arg MERCHANT_URL "$MERCHANT_URL" \
     --arg EXCHANGE_URL "$EXCHANGE_URL" \
     --arg BANK_URL "$BANK_URL/demobanks/default/access-api/"
-  )" &> ${MY_TMP_DIR}/taler-wallet-cli.log
-
-echo "Shutting down services"
-exit_cleanup
+  )" &> taler-wallet-cli.log
+echo " DONE"
 
 # Dump database
-echo "Dumping database ${BASEDB}(-libeufin).sql"
-pg_dump -O $TARGET_DB | sed -e '/AS integer/d' > ${BASEDB}.sql
-cd $MY_TMP_DIR
-sqlite3 ${TARGET_DB}-nexus.sqlite3 ".dump" > ${BASEDB}-libeufin-nexus.sql
-sqlite3 ${TARGET_DB}-sandbox.sqlite3 ".dump" > ${BASEDB}-libeufin-sandbox.sql
-rm ${TARGET_DB}-sandbox.sqlite3 ${TARGET_DB}-nexus.sqlite3 # libeufin DB
-cd $ORIGIN
+mkdir -p "$(dirname "$BASEDB")"
 
-echo $MASTER_PUB > ${BASEDB}.mpub
+echo "Dumping database ${BASEDB}.sql"
+pg_dump -O "auditor-basedb" | sed -e '/AS integer/d' > "${BASEDB}.sql"
 
 # clean up
-echo "Final clean up"
-dropdb $TARGET_DB
+echo -n "Final clean up ..."
+kill -TERM "$SETUP_PID"
+wait
+unset SETUP_PID
+dropdb "auditor-basedb"
+echo " DONE"
 
 echo "====================================="
-echo "  Finished generation of $BASEDB"
+echo "Finished generation of ${BASEDB}.sql"
 echo "====================================="
 
 exit 0
diff --git a/src/auditor/generate-revoke-basedb.sh 
b/src/auditor/generate-revoke-basedb.sh
index 745b96b7..4acfac28 100755
--- a/src/auditor/generate-revoke-basedb.sh
+++ b/src/auditor/generate-revoke-basedb.sh
@@ -8,405 +8,50 @@
 set -eu
 # set -x
 
-# Cleanup to run whenever we exit
-function exit_cleanup()
-{
-    echo "Running generate-revoke-basedb exit cleanup logic..."
-    if test -f ${MY_TMP_DIR:-/}/libeufin-sandbox.pid
-    then
-        PID=`cat ${MY_TMP_DIR}/libeufin-sandbox.pid 2> /dev/null`
-        kill $PID 2> /dev/null || true
-        rm ${MY_TMP_DIR}/libeufin-sandbox.pid
-        echo "Killed libeufin sandbox $PID"
-        wait $PID || true
-    fi
-    if test -f ${MY_TMP_DIR}/libeufin-nexus.pid
-    then
-        PID=`cat ${MY_TMP_DIR}/libeufin-nexus.pid 2> /dev/null`
-        kill $PID 2> /dev/null || true
-        rm ${MY_TMP_DIR}/libeufin-nexus.pid
-        echo "Killed libeufin nexus $PID"
-        wait $PID || true
-    fi
-    echo "killing libeufin DONE"
-    for n in `jobs -p`
-    do
-        kill $n 2> /dev/null || true
-    done
-    wait
-}
-
-function get_payto_uri() {
-    export LIBEUFIN_SANDBOX_USERNAME=$1
-    export LIBEUFIN_SANDBOX_PASSWORD=$2
-    export LIBEUFIN_SANDBOX_URL=$BANK_URL
-    cd $MY_TMP_DIR
-    libeufin-cli sandbox demobank info --bank-account $1 | jq --raw-output 
'.paytoUri'
-    cd $ORIGIN
-}
-
-# Install cleanup handler (except for kill -9)
-trap exit_cleanup EXIT
-
-# Exit, with status code "skip" (no 'real' failure)
-function exit_skip() {
-    echo $1
-    exit 77
-}
+. setup.sh
 
-# Where do we write the result?
-export BASEDB=${1:-"revoke-basedb"}
-
-# Name of the Postgres database we will use for the script.
-# Will be dropped, do NOT use anything that might be used
-# elsewhere
-export TARGET_DB=`basename ${BASEDB}`
-TMP_DIR=`mktemp -d revocation-tmp-XXXXXX`
-export WALLET_DB=wallet-revocation.json
-rm -f $WALLET_DB
-
-# Configuration file will be edited, so we create one
-# from the template.
-export CONF=${BASEDB}.conf
-cp generate-auditor-basedb.conf $CONF
-echo "Created configuration at ${CONF}"
-DATA_DIR=$1/exchange-data-dir/
-mkdir -p $DATA_DIR
-taler-config -c $CONF -s PATHS -o TALER_HOME -V $DATA_DIR
-
-echo -n "Testing for libeufin(-cli)"
-libeufin-cli --help >/dev/null </dev/null || exit_skip " MISSING"
-echo " FOUND"
-echo -n "Testing for taler-wallet-cli"
-taler-wallet-cli -v >/dev/null </dev/null || exit_skip " MISSING"
-echo " FOUND"
-echo -n "Testing for curl"
+echo -n "Testing for curl ..."
 curl --help >/dev/null </dev/null || exit_skip " MISSING"
 echo " FOUND"
 
-# reset database
-dropdb $TARGET_DB >/dev/null 2>/dev/null || true
-createdb $TARGET_DB || exit_skip "Could not create database $TARGET_DB"
-ORIGIN=`pwd`
-MY_TMP_DIR=`dirname $1`
-
-
-# obtain key configuration data
-MASTER_PRIV_FILE=$1.mpriv
-MASTER_PRIV_DIR=`dirname $MASTER_PRIV_FILE`
-taler-config -f -c $CONF -s exchange-offline -o MASTER_PRIV_FILE -V 
${MASTER_PRIV_FILE}
-mkdir -p $MASTER_PRIV_DIR
-rm -f "${MASTER_PRIV_FILE}"
-gnunet-ecc -g1 $MASTER_PRIV_FILE > /dev/null
-export MASTER_PUB=`gnunet-ecc -p $MASTER_PRIV_FILE`
-export EXCHANGE_URL=`taler-config -c $CONF -s EXCHANGE -o BASE_URL`
-MERCHANT_PORT=`taler-config -c $CONF -s MERCHANT -o PORT`
-export MERCHANT_URL=http://localhost:${MERCHANT_PORT}/
-BANK_PORT=`taler-config -c $CONF -s BANK -o HTTP_PORT`
-export BANK_URL=http://localhost:1${BANK_PORT}
-export AUDITOR_URL=http://localhost:8083/
-AUDITOR_PRIV_FILE=$1.apriv
-AUDITOR_PRIV_DIR=`dirname $AUDITOR_PRIV_FILE`
-taler-config -f -c ${CONF} -s auditor -o AUDITOR_PRIV_FILE -V 
${AUDITOR_PRIV_FILE}
-mkdir -p $AUDITOR_PRIV_DIR
-gnunet-ecc -l /dev/null -g1 $AUDITOR_PRIV_FILE > /dev/null
-AUDITOR_PUB=`gnunet-ecc -p $AUDITOR_PRIV_FILE`
-
-echo "MASTER PUB is ${MASTER_PUB} using file ${MASTER_PRIV_FILE}"
-echo "AUDITOR PUB is ${AUDITOR_PUB} using file ${AUDITOR_PRIV_FILE}"
-
-
-# patch configuration
-taler-config -c $CONF -s exchange -o MASTER_PUBLIC_KEY -V $MASTER_PUB
-taler-config -c $CONF -s auditor -o PUBLIC_KEY -V $AUDITOR_PUB
-taler-config -c $CONF -s merchant-exchange-default -o MASTER_KEY -V $MASTER_PUB
-taler-config -c $CONF -s exchangedb-postgres -o CONFIG -V 
postgres:///$TARGET_DB
-taler-config -c $CONF -s auditordb-postgres -o CONFIG -V postgres:///$TARGET_DB
-taler-config -c $CONF -s merchantdb-postgres -o CONFIG -V 
postgres:///$TARGET_DB
-taler-config -c $CONF -s bank -o database -V postgres:///$TARGET_DB
-taler-config -c $CONF -s exchange -o KEYDIR -V "${TMP_DIR}/keydir/"
-taler-config -c $CONF -s exchange -o REVOCATION_DIR -V "${TMP_DIR}/revdir/"
-
-# setup exchange
-echo "Setting up exchange"
-taler-exchange-dbinit -c $CONF
-
-echo "Setting up merchant"
-taler-merchant-dbinit -c $CONF
-
-# setup auditor
-echo "Setting up auditor"
-taler-auditor-dbinit -c $CONF
-taler-auditor-exchange -c $CONF -m $MASTER_PUB -u $EXCHANGE_URL
-
-# Launch services
-echo "Launching services"
-
-export 
LIBEUFIN_SANDBOX_DB_CONNECTION="jdbc:sqlite:${TARGET_DB}-sandbox.sqlite3"
-# Create the default demobank.
-cd $MY_TMP_DIR
-export LIBEUFIN_SANDBOX_ADMIN_PASSWORD=secret
-libeufin-sandbox config --currency "TESTKUDOS" default
-libeufin-sandbox serve --port "1${BANK_PORT}" \
-  > ${MY_TMP_DIR}/libeufin-sandbox-stdout.log \
-  2> ${MY_TMP_DIR}/libeufin-sandbox-stderr.log &
-echo $! > ${MY_TMP_DIR}/libeufin-sandbox.pid
-cd $ORIGIN
-export LIBEUFIN_SANDBOX_URL="http://localhost:1${BANK_PORT}";
-set +e
-echo -n "Waiting for Sandbox..."
-OK=0
-for n in `seq 1 50`; do
-  echo -n "."
-  sleep 1
-  if wget --timeout=1 \
-    --user admin --password secret --auth-no-challenge \
-    --tries=3 --waitretry=0 \
-    -o /dev/null -O /dev/null \
-    ${LIBEUFIN_SANDBOX_URL};
-  then
-    OK=1
-    break
-  fi
-done
-if test $OK != 1
-then
-    exit_skip " Failed to launch sandbox"
-fi
-echo "OK"
-
-register_sandbox_account() {
-    export LIBEUFIN_SANDBOX_USERNAME=$1
-    export LIBEUFIN_SANDBOX_PASSWORD=$2
-    cd $MY_TMP_DIR
-    libeufin-cli sandbox \
-      demobank \
-      register --name "$3"
-    cd $ORIGIN
-    unset LIBEUFIN_SANDBOX_USERNAME
-    unset LIBEUFIN_SANDBOX_PASSWORD
-}
-set -e
-echo -n "Register the 'fortytwo' Sandbox user.."
-register_sandbox_account fortytwo x "Forty Two"
-echo OK
-echo -n "Register the 'fortythree' Sandbox user.."
-register_sandbox_account fortythree x "Forty Three"
-echo OK
-echo -n "Register 'exchange' Sandbox user.."
-register_sandbox_account exchange x "Exchange Company"
-echo OK
-echo -n "Specify exchange's PAYTO_URI in the config ..."
-export LIBEUFIN_SANDBOX_USERNAME=exchange
-export LIBEUFIN_SANDBOX_PASSWORD=x
-cd $MY_TMP_DIR
-PAYTO=`libeufin-cli sandbox demobank info --bank-account exchange | jq 
--raw-output '.paytoUri'`
-taler-config -c $CONF -s exchange-account-1 -o PAYTO_URI -V $PAYTO
-echo " OK"
-echo -n "Setting this exchange as the bank's default ..."
-EXCHANGE_PAYTO=`libeufin-cli sandbox demobank info --bank-account exchange | 
jq --raw-output '.paytoUri'`
-libeufin-sandbox default-exchange "$EXCHANGE_URL" "$EXCHANGE_PAYTO"
-echo " OK"
-# Prepare EBICS: create Ebics host and Exchange subscriber.
-# Shortly becoming admin to setup Ebics.
-export LIBEUFIN_SANDBOX_USERNAME=admin
-export LIBEUFIN_SANDBOX_PASSWORD=secret
-echo -n "Create EBICS host at Sandbox.."
-libeufin-cli sandbox \
-  --sandbox-url "http://localhost:1${BANK_PORT}"; \
-  ebicshost create --host-id "talerebics"
-echo "OK"
-echo -n "Create exchange EBICS subscriber at Sandbox.."
-libeufin-cli sandbox \
-  demobank new-ebicssubscriber --host-id talerebics \
-  --user-id exchangeebics --partner-id talerpartner \
-  --bank-account exchange # that's a username _and_ a bank account name
-echo "OK"
-unset LIBEUFIN_SANDBOX_USERNAME
-unset LIBEUFIN_SANDBOX_PASSWORD
-# Prepare Nexus, which is the side actually talking
-# to the exchange.
-export LIBEUFIN_NEXUS_DB_CONNECTION="jdbc:sqlite:${TARGET_DB}-nexus.sqlite3"
-# For convenience, username and password are
-# identical to those used at the Sandbox.
-echo -n "Create exchange Nexus user..."
-libeufin-nexus superuser exchange --password x
-echo " OK"
-libeufin-nexus serve --port ${BANK_PORT} \
-  2> ${MY_TMP_DIR}/libeufin-nexus-stderr.log \
-  > ${MY_TMP_DIR}/libeufin-nexus-stdout.log &
-echo $! > ${MY_TMP_DIR}/libeufin-nexus.pid
-export LIBEUFIN_NEXUS_URL="http://localhost:${BANK_PORT}";
-echo -n "Waiting for Nexus..."
-set +e
-OK=0
-for n in `seq 1 50`; do
-  echo -n "."
-  sleep 1
-  if wget --timeout=1 \
-    --tries=3 --waitretry=0 \
-    -o /dev/null -O /dev/null \
-    $LIBEUFIN_NEXUS_URL;
-  then
-    OK=1
-    break
-  fi
-done
-if test $OK != 1
-then
-    exit_skip " Failed to launch Nexus at $LIBEUFIN_NEXUS_URL"
-fi
-set -e
-echo "OK"
-export LIBEUFIN_NEXUS_USERNAME=exchange
-export LIBEUFIN_NEXUS_PASSWORD=x
-echo -n "Creating an EBICS connection at Nexus..."
-libeufin-cli connections new-ebics-connection \
-  --ebics-url "http://localhost:1${BANK_PORT}/ebicsweb"; \
-  --host-id "talerebics" \
-  --partner-id "talerpartner" \
-  --ebics-user-id "exchangeebics" \
-  talerconn
-echo "OK"
-echo -n "Setup EBICS keying..."
-libeufin-cli connections connect "talerconn" > /dev/null
-echo "OK"
-echo -n "Download bank account name from Sandbox..."
-libeufin-cli connections download-bank-accounts "talerconn"
-echo "OK"
-echo -n "Importing bank account info into Nexus..."
-libeufin-cli connections import-bank-account \
-  --offered-account-id "exchange" \
-  --nexus-bank-account-id "exchange-nexus" \
-  "talerconn"
-echo "OK"
-echo -n "Setup payments submission task..."
-# Tries every second.
-libeufin-cli accounts task-schedule \
-  --task-type submit \
-  --task-name "exchange-payments" \
-  --task-cronspec "* * *" \
-  "exchange-nexus"
-echo "OK"
-# Tries every second.  Ask C52
-echo -n "Setup history fetch task..."
-libeufin-cli accounts task-schedule \
-  --task-type fetch \
-  --task-name "exchange-history" \
-  --task-cronspec "* * *" \
-  --task-param-level report \
-  --task-param-range-type latest \
-  "exchange-nexus"
-echo "OK"
-# create Taler facade.
-echo -n "Create the Taler facade at Nexus..."
-libeufin-cli facades \
-  new-taler-wire-gateway-facade \
-  --currency "TESTKUDOS" --facade-name "test-facade" \
-  "talerconn" "exchange-nexus"
-echo "OK"
-cd $ORIGIN
-# Facade schema: 
http://localhost:$BANK_PORT/facades/test-facade/taler-wire-gateway/
-
-TFN=`which taler-exchange-httpd`
-TBINPFX=`dirname $TFN`
-TLIBEXEC=${TBINPFX}/../lib/taler/libexec/
-taler-exchange-secmod-eddsa -c $CONF 2> 
${MY_TMP_DIR}/taler-exchange-secmod-eddsa.log &
-SIGNKEY_HELPER_PID=$!
-taler-exchange-secmod-rsa -c $CONF 2> 
${MY_TMP_DIR}/taler-exchange-secmod-rsa.log &
-RSA_DENOM_HELPER_PID=$!
-taler-exchange-secmod-cs -c $CONF 2> 
${MY_TMP_DIR}/taler-exchange-secmod-cs.log &
-CS_DENOM_HELPER_PID=$!
-taler-exchange-httpd -c $CONF 2> ${MY_TMP_DIR}/taler-exchange-httpd.log &
-EXCHANGE_PID=$!
-taler-merchant-httpd -c $CONF -L INFO 2> 
${MY_TMP_DIR}/taler-merchant-httpd.log &
-MERCHANT_PID=$!
-taler-exchange-wirewatch -c $CONF 2> 
${MY_TMP_DIR}/taler-exchange-wirewatch.log &
-taler-auditor-httpd -c $CONF 2> ${MY_TMP_DIR}/taler-auditor-httpd.log &
-
-# Wait for all bank to be available (usually the slowest)
-for n in `seq 1 50`
-do
-    echo -n "."
-    sleep 0.2
-    OK=0
-    # bank
-    wget http://localhost:8082/ -o /dev/null -O /dev/null >/dev/null || 
continue
-    OK=1
-    break
-done
-
-if [ 1 != $OK ]
-then
-    exit_skip "Failed to launch Bank services"
-fi
-
-# Wait for all other services to be available
-for n in `seq 1 50`
-do
-    echo -n "."
-    sleep 0.1
-    OK=0
-    # exchange
-    wget http://localhost:8081/seed -o /dev/null -O /dev/null >/dev/null || 
continue
-    # merchant
-    wget http://localhost:9966/ -o /dev/null -O /dev/null >/dev/null || 
continue
-    # Auditor
-    wget http://localhost:8083/ -o /dev/null -O /dev/null >/dev/null || 
continue
-    OK=1
-    break
-done
+CONF="generate-auditor-basedb.conf"
 
-if [ 1 != $OK ]
-then
-    exit_cleanup
-    exit_skip "Failed to launch Taler services"
-fi
+# reset database
+echo -n "Reset 'auditor-basedb' database ..."
+dropdb "auditor-basedb" >/dev/null 2>/dev/null || true
+createdb "auditor-basedb" || exit_skip "Could not create database '$BASEDB'"
 echo " DONE"
 
-echo -n "Setting up keys"
-
-taler-exchange-offline -c $CONF \
-  download sign \
-  enable-account `taler-config -c $CONF -s exchange-account-1 -o PAYTO_URI` \
-  enable-auditor $AUDITOR_PUB $AUDITOR_URL "TESTKUDOS Auditor" \
-  wire-fee now iban TESTKUDOS:0.01 TESTKUDOS:0.01 \
-  global-fee now TESTKUDOS:0.01 TESTKUDOS:0.01 TESTKUDOS:0.01 1h 1year 5 \
-  upload &> ${MY_TMP_DIR}/taler-exchange-offline.log
-
-echo -n "."
-
-for n in `seq 1 2`
-do
-    echo -n "."
-    OK=0
-    # bank
-    wget --timeout=1 http://localhost:8081/keys -o /dev/null -O /dev/null 
>/dev/null || continue
-    OK=1
-    break
-done
-
-if [ 1 != $OK ]
-then
-    exit_skip "Failed to setup keys"
-fi
+# Launch exchange, merchant and bank.
+setup -c "$CONF" \
+      -aenmsw \
+      -d "iban"
 
+# obtain key configuration data
+EXCHANGE_URL=$(taler-config -c "$CONF" -s EXCHANGE -o BASE_URL)
+MERCHANT_PORT=$(taler-config -c "$CONF" -s MERCHANT -o PORT)
+MERCHANT_URL="http://localhost:${MERCHANT_PORT}/";
+BANK_PORT=$(taler-config -c "$CONF" -s BANK -o HTTP_PORT)
+BANK_URL="http://localhost:1${BANK_PORT}";
 
-taler-auditor-offline -c $CONF \
-  download sign upload &> ${MY_TMP_DIR}/taler-auditor-offline.log
-
-echo " DONE"
 
 # Setup merchant
-echo -n "Setting up merchant"
-
-curl -H "Content-Type: application/json" -X POST -d '{"auth": {"method": 
"external"}, 
"accounts":[{"payto_uri":"payto://iban/SANDBOXX/DE474361?receiver-name=Merchant43"}],"id":"default","name":"default","address":{},"jurisdiction":{},"default_max_wire_fee":"TESTKUDOS:1",
 
"default_max_deposit_fee":"TESTKUDOS:1","default_wire_fee_amortization":1,"default_wire_transfer_delay":{"d_us"
 : 3600000000},"default_pay_delay":{"d_us": 3600000000}}' 
http://localhost:9966/management/instances
+echo -n "Setting up merchant ..."
+curl -H "Content-Type: application/json" -X POST -d '{"auth": {"method": 
"external"}, 
"accounts":[{"payto_uri":"payto://iban/SANDBOXX/DE474361?receiver-name=Merchant43"}],"id":"default","name":"default","address":{},"jurisdiction":{},"default_max_wire_fee":"TESTKUDOS:1",
 
"default_max_deposit_fee":"TESTKUDOS:1","default_wire_fee_amortization":1,"default_wire_transfer_delay":{"d_us"
 : 3600000000},"default_pay_delay":{"d_us": 3600000000}}' 
"${MERCHANT_URL}management/instances"
+echo " DONE"
 
 
 # run wallet CLI
 echo "Running wallet"
 
-taler-wallet-cli --no-throttle --wallet-db=$WALLET_DB api --expect-success 
'withdrawTestBalance' \
+export WALLET_DB="wallet.wdb"
+rm -f "$WALLET_DB"
+
+taler-wallet-cli \
+    --no-throttle \
+    --wallet-db="$WALLET_DB" \
+    api \
+    --expect-success 'withdrawTestBalance' \
   "$(jq -n '
     {
       amount: "TESTKUDOS:8",
@@ -414,57 +59,85 @@ taler-wallet-cli --no-throttle --wallet-db=$WALLET_DB api 
--expect-success 'with
       exchangeBaseUrl: $EXCHANGE_URL,
     }' \
     --arg BANK_URL "$BANK_URL/demobanks/default/access-api/" \
-    --arg EXCHANGE_URL $EXCHANGE_URL
-  )"
+    --arg EXCHANGE_URL "$EXCHANGE_URL"
+  )" &> taler-wallet-cli-withdraw.log
 
-taler-wallet-cli --no-throttle --wallet-db=$WALLET_DB run-until-done
+taler-wallet-cli \
+    --no-throttle \
+    --wallet-db="$WALLET_DB" \
+    run-until-done \
+    &> taler-wallet-cli-withdraw-finish.log
 
-export coins=$(taler-wallet-cli --wallet-db=$WALLET_DB advanced dump-coins)
+export COINS=$(taler-wallet-cli --wallet-db="$WALLET_DB" advanced dump-coins)
 
 echo -n "COINS are:"
-echo $coins
+echo "$COINS"
 
 # Find coin we want to revoke
-export rc=$(echo "$coins" | jq -r '[.coins[] | select((.denom_value == 
"TESTKUDOS:2"))][0] | .coin_pub')
+export rc=$(echo "$COINS" | jq -r '[.coins[] | select((.denom_value == 
"TESTKUDOS:2"))][0] | .coin_pub')
 # Find the denom
-export rd=$(echo "$coins" | jq -r '[.coins[] | select((.denom_value == 
"TESTKUDOS:2"))][0] | .denom_pub_hash')
-echo "Revoking denomination ${rd} (to affect coin ${rc})"
+export rd=$(echo "$COINS" | jq -r '[.coins[] | select((.denom_value == 
"TESTKUDOS:2"))][0] | .denom_pub_hash')
+echo -n "Revoking denomination ${rd} (to affect coin ${rc}) ..."
 # Find all other coins, which will be suspended
-export susp=$(echo "$coins" | jq --arg rc "$rc" '[.coins[] | select(.coin_pub 
!= $rc) | .coin_pub]')
+export susp=$(echo "$COINS" | jq --arg rc "$rc" '[.coins[] | select(.coin_pub 
!= $rc) | .coin_pub]')
 
 # Do the revocation
-taler-exchange-offline -c $CONF \
-  revoke-denomination "${rd}" upload &> 
${MY_TMP_DIR}/taler-exchange-offline-revoke.log
-
+taler-exchange-offline \
+    -c $CONF \
+    revoke-denomination "${rd}" \
+    upload \
+    &> taler-exchange-offline-revoke.log
+echo "DONE"
+
+echo -n "Signing replacement keys ..."
 sleep 1 # Give exchange time to create replacmenent key
 
 # Re-sign replacement keys
-taler-auditor-offline -c $CONF \
-  download sign upload &> ${MY_TMP_DIR}/taler-auditor-offline.log
+taler-auditor-offline \
+    -c $CONF \
+    download \
+    sign \
+    upload \
+    &> taler-auditor-offline-reinit.log
+echo " DONE"
 
 # Now we suspend the other coins, so later we will pay with the recouped coin
-taler-wallet-cli --wallet-db=$WALLET_DB advanced suspend-coins "$susp"
+taler-wallet-cli \
+    --wallet-db="$WALLET_DB" \
+    advanced \
+    suspend-coins "$susp"
 
 # Update exchange /keys so recoup gets scheduled
-taler-wallet-cli --wallet-db=$WALLET_DB exchanges update \
-                 -f $EXCHANGE_URL
+taler-wallet-cli \
+    --wallet-db="$WALLET_DB" \
+    exchanges \
+    update \
+    -f "$EXCHANGE_URL"
 
 # Block until scheduled operations are done
-taler-wallet-cli --wallet-db=$WALLET_DB run-until-done
+taler-wallet-cli \
+    --wallet-db="$WALLET_DB"\
+    run-until-done
 
-# Now we buy something, only the coins resulting from recouped will be
+# Now we buy something, only the coins resulting from recoup will be
 # used, as other ones are suspended
-taler-wallet-cli --no-throttle --wallet-db=$WALLET_DB api 'testPay' \
+taler-wallet-cli \
+    --no-throttle \
+    --wallet-db="$WALLET_DB" \
+    api \
+    'testPay' \
   "$(jq -n '
     {
       amount: "TESTKUDOS:1",
       merchantBaseUrl: $MERCHANT_URL,
       summary: "foo",
     }' \
-    --arg MERCHANT_URL $MERCHANT_URL
+    --arg MERCHANT_URL "$MERCHANT_URL"
   )"
 
-taler-wallet-cli --wallet-db=$WALLET_DB run-until-done
+taler-wallet-cli \
+    --wallet-db="$WALLET_DB" \
+    run-until-done
 
 echo "Purchase with recoup'ed coin (via reserve) done"
 
@@ -477,9 +150,6 @@ echo "Will refresh coin ${rrc} of denomination 
${zombie_denom}"
 # Find all other coins, which will be suspended
 export susp=$(echo "$coins" | jq --arg rrc "$rrc" '[.coins[] | 
select(.coin_pub != $rrc) | .coin_pub]')
 
-export rrc
-export zombie_denom
-
 # Travel into the future! (must match DURATION_WITHDRAW option)
 export TIMETRAVEL="--timetravel=604800000000"
 
@@ -510,8 +180,15 @@ do
 done
 
 echo "Refreshing coin $rrc"
-taler-wallet-cli $TIMETRAVEL --wallet-db=$WALLET_DB advanced force-refresh 
"$rrc"
-taler-wallet-cli $TIMETRAVEL --wallet-db=$WALLET_DB run-until-done
+taler-wallet-cli \
+    "$TIMETRAVEL" \
+    --wallet-db="$WALLET_DB" \
+    advanced force-refresh \
+    "$rrc"
+taler-wallet-cli \
+    "$TIMETRAVEL" \
+    --wallet-db="$WALLET_DB" \
+    run-until-done
 
 # Update our list of the coins
 export coins=$(taler-wallet-cli $TIMETRAVEL --wallet-db=$WALLET_DB advanced 
dump-coins)
@@ -534,29 +211,49 @@ export susp=$(echo "$coins" | jq --arg freshc "$freshc" 
'[.coins[] | select(.coi
 
 # Do the revocation of freshc
 echo "Revoking ${fresh_denom} (to affect coin ${freshc})"
-taler-exchange-offline -c $CONF \
-  revoke-denomination "${fresh_denom}" upload &> 
${MY_TMP_DIR}/taler-exchange-offline-revoke-2.log
+taler-exchange-offline \
+    -c "$CONF" \
+    revoke-denomination \
+    "${fresh_denom}" \
+    upload &> taler-exchange-offline-revoke-2.log
 
 sleep 1 # Give exchange time to create replacmenent key
 
 # Re-sign replacement keys
-taler-auditor-offline -c $CONF \
-  download sign upload &> ${MY_TMP_DIR}/taler-auditor-offline.log
+taler-auditor-offline \
+    -c "$CONF" \
+    download \
+    sign \
+    upload &> taler-auditor-offline.log
 
 # Now we suspend the other coins, so later we will pay with the recouped coin
-taler-wallet-cli $TIMETRAVEL --wallet-db=$WALLET_DB advanced suspend-coins 
"$susp"
+taler-wallet-cli \
+    "$TIMETRAVEL" \
+    --wallet-db="$WALLET_DB" \
+    advanced \
+    suspend-coins "$susp"
 
 # Update exchange /keys so recoup gets scheduled
-taler-wallet-cli $TIMETRAVEL --wallet-db=$WALLET_DB exchanges update \
-                 -f $EXCHANGE_URL
+taler-wallet-cli \
+    "$TIMETRAVEL"\
+    --wallet-db="$WALLET_DB" \
+    exchanges update \
+    -f "$EXCHANGE_URL"
 
 # Block until scheduled operations are done
-taler-wallet-cli $TIMETRAVEL --wallet-db=$WALLET_DB run-until-done
+taler-wallet-cli \
+    "$TIMETRAVEL" \
+    --wallet-db="$WALLET_DB" \
+    run-until-done
 
 echo "Restarting merchant (so new keys are known)"
 kill -TERM $MERCHANT_PID
-taler-merchant-httpd -c $CONF -L INFO 2> 
${MY_TMP_DIR}/taler-merchant-httpd.log &
+taler-merchant-httpd \
+    -c "$CONF" \
+    -L INFO \
+    2> ${MY_TMP_DIR}/taler-merchant-httpd.log &
 MERCHANT_PID=$!
+
 # Wait for merchant to be again available
 for n in `seq 1 50`
 do
@@ -580,7 +277,10 @@ taler-wallet-cli $TIMETRAVEL --no-throttle 
--wallet-db=$WALLET_DB api 'testPay'
     }' \
     --arg MERCHANT_URL $MERCHANT_URL
   )"
-taler-wallet-cli $TIMETRAVEL --wallet-db=$WALLET_DB run-until-done
+taler-wallet-cli \
+    "$TIMETRAVEL" \
+    --wallet-db="$WALLET_DB" \
+    run-until-done
 
 echo "Bought something with refresh-recouped coin"
 
@@ -588,26 +288,24 @@ echo "Shutting down services"
 exit_cleanup
 
 
-# Dump database
-echo "Dumping database"
-echo "Dumping PostgreSQL database: ${BASEDB}.sql"
-pg_dump -O $TARGET_DB | sed -e '/AS integer/d' > ${BASEDB}.sql
-echo "Dumping libeufin database: ${TARGET_DB}-libeufin-*.sql"
-cd $MY_TMP_DIR
-sqlite3 ${TARGET_DB}-nexus.sqlite3 ".dump" > ${BASEDB}-libeufin-nexus.sql
-sqlite3 ${TARGET_DB}-sandbox.sqlite3 ".dump" > ${BASEDB}-libeufin-sandbox.sql
-
-rm ${TARGET_DB}-sandbox.sqlite3 ${TARGET_DB}-nexus.sqlite3 # libeufin DB
-
-cd $ORIGIN
+# Where do we write the result?
+export BASEDB=${1:-"revoke-basedb"}
 
-echo $MASTER_PUB > ${BASEDB}.mpub
 
-echo "Final clean up"
-dropdb $TARGET_DB
+# Dump database
+echo "Dumping database ${BASEDB}.sql"
+pg_dump -O "auditor-basedb" | sed -e '/AS integer/d' > "${BASEDB}.sql"
+
+# clean up
+echo -n "Final clean up ..."
+kill -TERM "$SETUP_PID"
+wait
+unset SETUP_PID
+dropdb "auditor-basedb"
+echo " DONE"
 
 echo "====================================="
-echo "  Finished generation of $BASEDB "
+echo "Finished generation of ${BASEDB}.sql"
 echo "====================================="
 
 exit 0
diff --git 
a/src/auditor/generate_auditordb_home/.local/share/taler/exchange-offline/master.priv
 
b/src/auditor/generate_auditordb_home/.local/share/taler/exchange-offline/master.priv
new file mode 100644
index 00000000..85195dd8
--- /dev/null
+++ 
b/src/auditor/generate_auditordb_home/.local/share/taler/exchange-offline/master.priv
@@ -0,0 +1 @@
+%I7qY���X�2@���%'1���O���J����
\ No newline at end of file
diff --git a/src/auditor/setup.sh b/src/auditor/setup.sh
new file mode 100755
index 00000000..2af15494
--- /dev/null
+++ b/src/auditor/setup.sh
@@ -0,0 +1,72 @@
+#!/bin/sh
+# This file is in the public domain
+
+# Script to be inlined into the main test scripts. Defines function 'setup()'
+# which wraps around 'taler-unified-setup.sh' to launch GNU Taler services.
+# Call setup() with the arguments to pass to 'taler-unified-setup'. setup()
+# will then launch GNU Taler, wait for the process to be complete before
+# returning. The script will also install an exit handler to ensure the GNU
+# Taler processes are stopped when the shell exits.
+
+set -eu
+
+# Cleanup to run whenever we exit
+function exit_cleanup()
+{
+    if [ ! -z ${SETUP_PID+x} ]
+    then
+        echo "Killing taler-unified-setup ($SETUP_PID)" >&2
+        kill -TERM "$SETUP_PID"
+        wait
+    fi
+}
+
+# Install cleanup handler (except for kill -9)
+trap exit_cleanup EXIT
+
+function setup()
+{
+    echo "Starting test system ..." >&2
+    # Create a named pipe in a temp directory we own.
+    FIFO_DIR=$(mktemp -d fifo-XXXXXX)
+    FIFO_OUT=$(echo "$FIFO_DIR/out")
+    mkfifo "$FIFO_OUT"
+    # Open pipe as FD 3 (RW) and FD 4 (RO)
+    exec 3<> "$FIFO_OUT" 4< "$FIFO_OUT"
+    rm -rf "$FIFO_DIR"
+    # We require '-W' for our termination logic to work.
+    taler-unified-setup.sh -W "$@" >&3 &
+    SETUP_PID=$!
+    # Close FD3
+    exec 3>&-
+    sed -u '/<<READY>>/ q' <&4
+    # Close FD4
+    exec 4>&-
+    echo "Test system ready" >&2
+}
+
+# Exit, with status code "skip" (no 'real' failure)
+function exit_fail() {
+    echo "$@" >&2
+    exit 1
+}
+
+# Exit, with status code "skip" (no 'real' failure)
+function exit_skip() {
+    echo "SKIPPING: $1"
+    exit 77
+}
+
+function get_payto_uri() {
+    export LIBEUFIN_SANDBOX_USERNAME="$1"
+    export LIBEUFIN_SANDBOX_PASSWORD="$2"
+    export LIBEUFIN_SANDBOX_URL="http://localhost:18082";
+    libeufin-cli sandbox demobank info --bank-account "$1" | jq --raw-output 
'.paytoUri'
+}
+
+function get_bankaccount_transactions() {
+    export LIBEUFIN_SANDBOX_USERNAME=$1
+    export LIBEUFIN_SANDBOX_PASSWORD=$2
+    export LIBEUFIN_SANDBOX_URL="http://localhost:18082";
+    libeufin-cli sandbox demobank list-transactions --bank-account $1
+}
diff --git a/src/auditor/test-auditor.sh b/src/auditor/test-auditor.sh
index 7f4ec1ca..da9a90e0 100755
--- a/src/auditor/test-auditor.sh
+++ b/src/auditor/test-auditor.sh
@@ -1,7 +1,7 @@
 #!/bin/bash
 #
 #  This file is part of TALER
-#  Copyright (C) 2014-2022 Taler Systems SA
+#  Copyright (C) 2014-2023 Taler Systems SA
 #
 #  TALER is free software; you can redistribute it and/or modify it under the
 #  terms of the GNU General Public License as published by the Free Software
@@ -49,17 +49,7 @@ VALGRIND=""
 # history request.
 LIBEUFIN_SETTLE_TIME=1
 
-# Exit, with status code "skip" (no 'real' failure)
-function exit_skip() {
-    echo "SKIPPING test: $1"
-    exit 77
-}
-
-# Exit, with error message (hard failure)
-function exit_fail() {
-    echo "FAILING test: $1"
-    exit 1
-}
+. setup.sh
 
 # Stop libeufin sandbox and nexus (if running)
 function stop_libeufin()
@@ -2002,12 +1992,12 @@ function check_with_database()
 {
     BASEDB=$1
     CONF=$1.conf
-    ORIGIN=`pwd`
-    MY_TMP_DIR=`dirname $1`
+    ORIGIN=$(pwd)
+    MY_TMP_DIR=$(dirname $1)
     echo "Running test suite with database $BASEDB using configuration $CONF"
     MASTER_PRIV_FILE=${BASEDB}.mpriv
     taler-config -f -c ${CONF} -s exchange-offline -o MASTER_PRIV_FILE -V 
${MASTER_PRIV_FILE}
-    MASTER_PUB=`gnunet-ecc -p $MASTER_PRIV_FILE`
+    MASTER_PUB=$(gnunet-ecc -p $MASTER_PRIV_FILE)
 
     echo "MASTER PUB is ${MASTER_PUB} using file ${MASTER_PRIV_FILE}"
 
@@ -2037,7 +2027,7 @@ function check_with_database()
 
 # ####### Setup globals ######
 # Postgres database to use
-export DB=auditor-basedb
+export DB="auditor-basedb"
 
 # test required commands exist
 echo "Testing for jq"
@@ -2059,12 +2049,12 @@ INITDB_BIN=$(command -v initdb) || true
 if [[ ! -z "$INITDB_BIN" ]]; then
   echo " FOUND (in path) at" $INITDB_BIN
 else
-  HAVE_INITDB=`find /usr -name "initdb" | head -1 2> /dev/null | grep 
postgres` || exit_skip " MISSING"
-  echo " FOUND at" `dirname $HAVE_INITDB`
-  INITDB_BIN=`echo $HAVE_INITDB | grep bin/initdb | grep postgres | sort -n | 
tail -n1`
+  HAVE_INITDB=$(find /usr -name "initdb" | head -1 2> /dev/null | grep 
postgres) || exit_skip " MISSING"
+  echo " FOUND at" $(dirname $HAVE_INITDB)
+  INITDB_BIN=$(echo $HAVE_INITDB | grep bin/initdb | grep postgres | sort -n | 
tail -n1)
 fi
-POSTGRES_PATH=`dirname $INITDB_BIN`
-MYDIR=`mktemp -d /tmp/taler-auditor-basedbXXXXXX`
+POSTGRES_PATH=$(dirname $INITDB_BIN)
+MYDIR=$(mktemp -d /tmp/taler-auditor-basedbXXXXXX)
 echo "Using $MYDIR for logging and temporary data"
 TMPDIR="$MYDIR/postgres/"
 mkdir -p $TMPDIR
@@ -2089,9 +2079,9 @@ PGHOST="$TMPDIR/sockets"
 export PGHOST
 
 echo "Generating fresh database at $MYDIR"
-if faketime -f '-1 d' ./generate-auditor-basedb.sh $MYDIR/$DB
+if faketime -f '-1 d' ./generate-auditor-basedb.sh "$MYDIR/$DB"
 then
-    check_with_database $MYDIR/$DB
+    check_with_database "$MYDIR/$DB"
     if test x$fail != x0
     then
         exit $fail
diff --git a/src/testing/taler-unified-setup.sh 
b/src/testing/taler-unified-setup.sh
index 1ddc3316..201250bf 100755
--- a/src/testing/taler-unified-setup.sh
+++ b/src/testing/taler-unified-setup.sh
@@ -251,7 +251,7 @@ then
     echo -n "Configuring sandbox "
     libeufin-sandbox config --currency "$CURRENCY" default &> 
libeufin-sandbox-config.log
     echo "DONE"
-    echo -n "Launching sandbox "
+    echo -n "Launching sandbox ... "
     export LIBEUFIN_SANDBOX_ADMIN_PASSWORD="secret"
     libeufin-sandbox serve \
       --port "$SANDBOX_PORT" \
@@ -660,6 +660,8 @@ then
           enable-account "$EXCHANGE_PAYTO_URI" \
           upload &> "taler-exchange-offline-account.log"
         echo " OK"
+    else
+        echo "WARNING: Account ${USE_ACCOUNT} not enabled (set to: '$ENABLED')"
     fi
     if [ "1" = "$START_AUDITOR" ]
     then

-- 
To stop receiving notification emails like this one, please contact
gnunet@gnunet.org.



reply via email to

[Prev in Thread] Current Thread [Next in Thread]