[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] [taler-exchange] branch master updated: more auditor tests,
|
From: |
gnunet |
|
Subject: |
[GNUnet-SVN] [taler-exchange] branch master updated: more auditor tests, misc auditor bugfixes |
|
Date: |
Wed, 04 Sep 2019 04:06:29 +0200 |
This is an automated email from the git hooks/post-receive script.
grothoff pushed a commit to branch master
in repository exchange.
The following commit(s) were added to refs/heads/master by this push:
new 97ca10d8 more auditor tests, misc auditor bugfixes
97ca10d8 is described below
commit 97ca10d8353a003deb0f460cd99d938639750368
Author: Christian Grothoff <address@hidden>
AuthorDate: Wed Sep 4 04:06:16 2019 +0200
more auditor tests, misc auditor bugfixes
---
contrib/auditor-report.tex.j2 | 39 +++----
src/auditor/taler-auditor.c | 4 +
src/auditor/taler-wire-auditor.c | 71 +++++++-----
src/auditor/test-auditor.sh | 229 +++++++++++++++++++++++++++++++++++----
4 files changed, 278 insertions(+), 65 deletions(-)
diff --git a/contrib/auditor-report.tex.j2 b/contrib/auditor-report.tex.j2
index 5a423592..c3f90843 100644
--- a/contrib/auditor-report.tex.j2
+++ b/contrib/auditor-report.tex.j2
@@ -1,5 +1,5 @@
% This file is part of TALER
-% Copyright (C) 2016, 2017 Taler Systems SA
+% Copyright (C) 2016--2019 Taler Systems SA
%
% TALER is free software; you can redistribute it and/or modify it under the
% terms of the GNU Affero General Public License as published by the Free
Software
@@ -483,7 +483,7 @@ public key for ``payback-master'' operations.
This section highlights cases where the exchange's record about
incoming wire transfers does not match with that of the bank.
-% Table generation tested by testcase #3 in test-auditor.sh
+% Table generation tested by testcase #3 and #8 in test-auditor.sh
{% if wire.reserve_in_amount_inconsistencies|length() == 0 %}
{\bf All incoming wire transfer amounts and subjects matched up.}
@@ -547,11 +547,12 @@ This will cause funds to be sent to the wrong account
when the reserve
is closed and the remaining balance is refunded to the original
account.
+% Table generation tested by testcase #9 in test-auditor.sh
{% if wire.missattribution_in_inconsistencies|length() == 0 %}
{\bf All incoming wire transfer sender accounts matched up.}
{% else %}
- \begin{longtable}{p{6.5cm}|r}
+ \begin{longtable}{p{8.5cm}|r}
{\bf Wire transfer identifier} & {\bf Amount} \\
\hline \hline
\endfirsthead
@@ -563,13 +564,13 @@ account.
\endfoot
\hline
{\bf Total amount} &
- {{ wire.total_missattribution_in_plus}} \\
+ {{ wire.total_missattribution_in}} \\
\caption{Incoming wire transfer sender accounts not matching up.}
\label{table:wire_in:sender_account_inconsistencies}
\endlastfoot
{% for item in wire.missattribution_in_inconsistencies %}
- {\tt {{ item.wtid }} } &
- {{ item.amount }} \\ hline
+ {\tt \small \truncate{8.3cm}{ {{ item.wtid }} } } &
+ {{ item.amount }} \\ \hline
{% endfor %}
\end{longtable}
{% endif %}
@@ -585,8 +586,8 @@ with respect to outgoing wire transfers.
{% if wire.wire_out_amount_inconsistencies|length() == 0 %}
{\bf All outgoing wire transfers matched up.}
{% else %}
- \begin{longtable}{p{6.5cm}|r|r}
- {\bf Wire transfer identifier} & {\bf Wired} & {\bf Justified}} \\
+ \begin{longtable}{p{5.5cm}|r|r}
+ {\bf Wire transfer identifier} & {\bf Wired} & {\bf Justified} \\
{\bf Diagnostic} & {\bf Row} & {\bf Timestamp} \\
\hline \hline
\endfirsthead
@@ -596,24 +597,23 @@ with respect to outgoing wire transfers.
\endhead
\hline \hline
{\bf Wire transfer identifier} & {\bf Wired} & {\bf Justified} \\
- {\bf Diagnostic} & {\bf Row}} & {\bf Timestamp} \\
+ {\bf Diagnostic} & {\bf Row} & {\bf Timestamp} \\
\endfoot
\hline
- {\bf Total deltas} & &
+ {\bf Total deltas} &
{{ wire.total_wire_out_delta_plus }} &
- {{ wire.total_wire_out_delta_minus }} \\
\caption{Outgoing wire transfer amounts not matching up.}
\label{table:wire_out:transfer_amount_inconsistencies}
\endlastfoot
{% for item in wire.wire_out_amount_inconsistencies %}
- {\tt \small {{ item.wtid }} } &
+ {\tt \small \truncate{5.2cm}{ {{ item.wtid }} } } &
{{ item.amount_wired }} &
- {{ item.amount_justified }} \\ \hline
+ {{ item.amount_justified }} \\
\nopagebreak
- &
{{ item.diagnostic }} &
{{ item.row }} &
- {{ item.timestmap }} \\ \hline
+ {\tiny {{ item.timestamp }} } \\ \hline
{% endfor %}
\end{longtable}
{% endif %}
@@ -934,22 +934,23 @@ implications.
This section lists issues with wire transfers related to timestamps.
+% Table generation tested by testcase #10 in test-auditor.sh
{% if wire.row_minor_inconsistencies|length() == 0 %}
{\bf No timestamp issues detected.}
{% else %}
- \begin{longtable}{p{1.5cm}|r|p{5.5}}
- {\bf Table} & {\bf Table row} & {\bf Diagnostic}
+ \begin{longtable}{p{3cm}|r|p{5cm}}
+ {\bf Table} & {\bf Row} & {\bf Diagnostic}
\\ \hline \hline
\endfirsthead
- {\bf Table} & {\bf Table row} & {\bf Diagnostic}
+ {\bf Table} & {\bf Row} & {\bf Diagnostic}
\\ \hline \hline
\endhead
\hline \hline
- {\bf Table} & {\bf Table row} & {\bf Diagnostic} \\
+ {\bf Table} & {\bf Row} & {\bf Diagnostic} \\
\endfoot
\hline \hline
- {\bf Table} & {\bf Table row} & {\bf Diagnostic} \\
+ {\bf Table} & {\bf Row} & {\bf Diagnostic} \\
\caption{Execution times not matching in wire transfers.}
\label{table:wire:bad_time}
\endlastfoot
diff --git a/src/auditor/taler-auditor.c b/src/auditor/taler-auditor.c
index 0563ff70..94369547 100644
--- a/src/auditor/taler-auditor.c
+++ b/src/auditor/taler-auditor.c
@@ -5222,8 +5222,10 @@ run (void *cls,
/* block */
"reserve_balance_insufficient_inconsistencies",
report_reserve_balance_insufficient_inconsistencies,
+ /* Tested in test-auditor.sh #3 */
"total_loss_balance_insufficient",
TALER_JSON_from_amount
(&total_balance_insufficient_loss),
+ /* Tested in test-auditor.sh #3 */
"reserve_balance_summary_wrong_inconsistencies",
report_reserve_balance_summary_wrong_inconsistencies,
"total_balance_summary_delta_plus",
@@ -5264,9 +5266,11 @@ run (void *cls,
TALER_JSON_from_amount (&total_wire_out_delta_plus),
"total_wire_out_delta_minus",
TALER_JSON_from_amount (&total_wire_out_delta_minus),
+ /* Tested in test-auditor.sh #4/#5/#6/#7 */
"bad_sig_losses",
report_bad_sig_losses,
/* block */
+ /* Tested in test-auditor.sh #4/#5/#6/#7 */
"total_bad_sig_loss",
TALER_JSON_from_amount (&total_bad_sig_loss),
"row_inconsistencies",
diff --git a/src/auditor/taler-wire-auditor.c b/src/auditor/taler-wire-auditor.c
index 8eec0dcf..c52afc0f 100644
--- a/src/auditor/taler-wire-auditor.c
+++ b/src/auditor/taler-wire-auditor.c
@@ -320,6 +320,20 @@ struct ReserveOutInfo
/**
+ * Convert absolute time to human-readable JSON string.
+ *
+ * @param at time to convert
+ * @return human-readable string representing the time
+ */
+static json_t *
+json_from_time_abs (struct GNUNET_TIME_Absolute at)
+{
+ return json_string
+ (GNUNET_STRINGS_absolute_time_to_string (at));
+}
+
+
+/**
* Free entry in #in_map.
*
* @param cls NULL
@@ -390,25 +404,33 @@ do_shutdown (void *cls)
" s:o, s:o, s:o, s:o, s:o,"
" s:o, s:o, s:o, s:o }",
/* blocks of 5 */
+ /* Tested in test-auditor.sh #11 */
"wire_out_amount_inconsistencies",
report_wire_out_inconsistencies,
"total_wire_out_delta_plus",
TALER_JSON_from_amount (&total_bad_amount_out_plus),
+ /* Tested in test-auditor.sh #11 */
"total_wire_out_delta_minus",
TALER_JSON_from_amount (&total_bad_amount_out_minus),
+ /* Tested in test-auditor.sh #2 */
"reserve_in_amount_inconsistencies",
report_reserve_in_inconsistencies,
+ /* Tested in test-auditor.sh #2 */
"total_wire_in_delta_plus",
TALER_JSON_from_amount (&total_bad_amount_in_plus),
/* block */
+ /* Tested in test-auditor.sh #3 */
"total_wire_in_delta_minus",
TALER_JSON_from_amount (&total_bad_amount_in_minus),
+ /* Tested in test-auditor.sh #9 */
"missattribution_in_inconsistencies",
report_missattribution_in_inconsistencies,
+ /* Tested in test-auditor.sh #9 */
"total_missattribution_in",
TALER_JSON_from_amount (&total_missattribution_in),
"row_inconsistencies",
report_row_inconsistencies,
+ /* Tested in test-auditor.sh #10 */
"row_minor_inconsistencies",
report_row_minor_inconsistencies,
/* block */
@@ -649,11 +671,10 @@ wire_missing_cb (void *cls,
&tiny_amount)) )
return; /* acceptable, amount was tiny */
report (report_lags,
- json_pack ("{s:I, s:o, s:s, s:s, s:o, s:O}",
+ json_pack ("{s:I, s:o, s:o, s:s, s:o, s:O}",
"row", (json_int_t) rowid,
"amount", TALER_JSON_from_amount (amount),
- "deadline", GNUNET_STRINGS_absolute_time_to_string (
- deadline),
+ "deadline", json_from_time_abs (deadline),
"claimed_done", (done) ? "yes" : "no",
"coin_pub", GNUNET_JSON_from_data_auto (coin_pub),
"account", wire));
@@ -757,13 +778,12 @@ wire_out_cb (void *cls,
This is moderately harmless, it might just be that the aggreator
has not yet fully caught up with the transfers it should do. */
report (report_wire_out_inconsistencies,
- json_pack ("{s:I, s:o, s:o, s:o, s:s, s:s}",
+ json_pack ("{s:I, s:o, s:o, s:o, s:o, s:s}",
"row", (json_int_t) rowid,
"amount_wired", TALER_JSON_from_amount (&zero),
"amount_justified", TALER_JSON_from_amount (amount),
"wtid", GNUNET_JSON_from_data_auto (wtid),
- "timestamp", GNUNET_STRINGS_absolute_time_to_string (
- date),
+ "timestamp", json_from_time_abs (date),
"diagnostic", "wire transfer not made (yet?)"));
GNUNET_break (GNUNET_OK ==
TALER_amount_add (&total_bad_amount_out_minus,
@@ -782,27 +802,25 @@ wire_out_cb (void *cls,
we should count the wire transfer as entirely spurious, and
additionally consider the justified wire transfer as missing. */
report (report_wire_out_inconsistencies,
- json_pack ("{s:I, s:o, s:o, s:o, s:s, s:s}",
+ json_pack ("{s:I, s:o, s:o, s:o, s:o, s:s}",
"row", (json_int_t) rowid,
"amount_wired", TALER_JSON_from_amount (
&roi->details.amount),
"amount_justified", TALER_JSON_from_amount (&zero),
"wtid", GNUNET_JSON_from_data_auto (wtid),
- "timestamp", GNUNET_STRINGS_absolute_time_to_string (
- date),
+ "timestamp", json_from_time_abs (date),
"diagnostic", "recevier account missmatch"));
GNUNET_break (GNUNET_OK ==
TALER_amount_add (&total_bad_amount_out_plus,
&total_bad_amount_out_plus,
&roi->details.amount));
report (report_wire_out_inconsistencies,
- json_pack ("{s:I, s:o, s:o, s:o, s:s, s:s}",
+ json_pack ("{s:I, s:o, s:o, s:o, s:o, s:s}",
"row", (json_int_t) rowid,
"amount_wired", TALER_JSON_from_amount (&zero),
"amount_justified", TALER_JSON_from_amount (amount),
"wtid", GNUNET_JSON_from_data_auto (wtid),
- "timestamp", GNUNET_STRINGS_absolute_time_to_string (
- date),
+ "timestamp", json_from_time_abs (date),
"diagnostic", "receiver account missmatch"));
GNUNET_break (GNUNET_OK ==
TALER_amount_add (&total_bad_amount_out_minus,
@@ -817,14 +835,13 @@ wire_out_cb (void *cls,
amount))
{
report (report_wire_out_inconsistencies,
- json_pack ("{s:I, s:o, s:o, s:o, s:s, s:s}",
+ json_pack ("{s:I, s:o, s:o, s:o, s:o, s:s}",
"row", (json_int_t) rowid,
"amount_justified", TALER_JSON_from_amount (amount),
"amount_wired", TALER_JSON_from_amount (
&roi->details.amount),
"wtid", GNUNET_JSON_from_data_auto (wtid),
- "timestamp", GNUNET_STRINGS_absolute_time_to_string (
- date),
+ "timestamp", json_from_time_abs (date),
"diagnostic", "wire amount does not match"));
if (0 < TALER_amount_cmp (amount,
&roi->details.amount))
@@ -899,7 +916,7 @@ complain_out_not_found (void *cls,
(void) wa; // FIXME: log which account is affected...
report (report_wire_out_inconsistencies,
- json_pack ("{s:I, s:o, s:o, s:o, s:s, s:s}",
+ json_pack ("{s:I, s:o, s:o, s:o, s:o, s:s}",
"row", (json_int_t) 0,
"amount_wired", TALER_JSON_from_amount (
&roi->details.amount),
@@ -907,7 +924,7 @@ complain_out_not_found (void *cls,
"wtid", (NULL == roi->details.wtid_s)
? GNUNET_JSON_from_data_auto (&roi->details.wtid)
: json_string (roi->details.wtid_s),
- "timestamp", GNUNET_STRINGS_absolute_time_to_string (
+ "timestamp", json_from_time_abs (
roi->details.execution_date),
"diagnostic",
"justification for wire transfer not found"));
@@ -1258,13 +1275,13 @@ complain_in_not_found (void *cls,
struct ReserveInInfo *rii = value;
report (report_reserve_in_inconsistencies,
- json_pack ("{s:I, s:o, s:o, s:o, s:s, s:s, s:s}",
+ json_pack ("{s:I, s:o, s:o, s:o, s:o, s:s, s:s}",
"row", (json_int_t) rii->rowid,
- "amount_expected", TALER_JSON_from_amount (
+ "amount_exchange_expected", TALER_JSON_from_amount (
&rii->details.amount),
"amount_wired", TALER_JSON_from_amount (&zero),
"wtid", GNUNET_JSON_from_data_auto (&rii->details.wtid),
- "timestamp", GNUNET_STRINGS_absolute_time_to_string (
+ "timestamp", json_from_time_abs (
rii->details.execution_date),
"account", wa->section_name,
"diagnostic",
@@ -1393,7 +1410,7 @@ history_credit_cb (void *cls,
&rii->details.wtid))
{
report (report_reserve_in_inconsistencies,
- json_pack ("{s:I, s:o, s:o, s:o, s:o, s:s, s:s}",
+ json_pack ("{s:I, s:o, s:o, s:o, s:o, s:o, s:s}",
"row", (json_int_t) rii->rowid,
"raw_bank_row", GNUNET_JSON_from_data (row_off,
row_off_size),
@@ -1401,7 +1418,7 @@ history_credit_cb (void *cls,
&rii->details.amount),
"amount_wired", TALER_JSON_from_amount (&zero),
"wtid", GNUNET_JSON_from_data_auto (&rii->details.wtid),
- "timestamp", GNUNET_STRINGS_absolute_time_to_string (
+ "timestamp", json_from_time_abs (
rii->details.execution_date),
"diagnostic", "wire subject does not match"));
GNUNET_break (GNUNET_OK ==
@@ -1409,7 +1426,7 @@ history_credit_cb (void *cls,
&total_bad_amount_in_minus,
&rii->details.amount));
report (report_reserve_in_inconsistencies,
- json_pack ("{s:I, s:o, s:o, s:o, s:o, s:s, s:s}",
+ json_pack ("{s:I, s:o, s:o, s:o, s:o, s:o, s:s}",
"row", (json_int_t) rii->rowid,
"raw_bank_row", GNUNET_JSON_from_data (row_off,
row_off_size),
@@ -1418,7 +1435,7 @@ history_credit_cb (void *cls,
"amount_wired", TALER_JSON_from_amount (
&details->amount),
"wtid", GNUNET_JSON_from_data_auto (&details->wtid),
- "timestamp", GNUNET_STRINGS_absolute_time_to_string (
+ "timestamp", json_from_time_abs (
details->execution_date),
"diagnostic", "wire subject does not match"));
@@ -1432,7 +1449,7 @@ history_credit_cb (void *cls,
&details->amount))
{
report (report_reserve_in_inconsistencies,
- json_pack ("{s:I, s:o, s:o, s:o, s:o, s:s, s:s}",
+ json_pack ("{s:I, s:o, s:o, s:o, s:o, s:o, s:s}",
"row", (json_int_t) rii->rowid,
"raw_bank_row", GNUNET_JSON_from_data (row_off,
row_off_size),
@@ -1441,7 +1458,7 @@ history_credit_cb (void *cls,
"amount_wired", TALER_JSON_from_amount (
&details->amount),
"wtid", GNUNET_JSON_from_data_auto (&details->wtid),
- "timestamp", GNUNET_STRINGS_absolute_time_to_string (
+ "timestamp", json_from_time_abs (
details->execution_date),
"diagnostic", "wire amount does not match"));
if (0 < TALER_amount_cmp (&details->amount,
@@ -1479,7 +1496,7 @@ history_credit_cb (void *cls,
rii->details.account_url))
{
report (report_missattribution_in_inconsistencies,
- json_pack ("{s:s, s:I, s:o, s:o}",
+ json_pack ("{s:o, s:I, s:o, s:o}",
"amount", TALER_JSON_from_amount (&rii->details.amount),
"row", (json_int_t) rii->rowid,
"raw_bank_row", GNUNET_JSON_from_data (row_off,
diff --git a/src/auditor/test-auditor.sh b/src/auditor/test-auditor.sh
index 5dacaf19..da9faee6 100755
--- a/src/auditor/test-auditor.sh
+++ b/src/auditor/test-auditor.sh
@@ -9,7 +9,7 @@ set -eu
# Set of numbers for all the testcases.
# When adding new tests, increase the last number:
-ALL_TESTS=`seq 0 7`
+ALL_TESTS=`seq 0 10`
# $TESTS determines which tests we should run.
# This construction is used to make it easy to
@@ -32,7 +32,7 @@ function exit_skip() {
# Exit, with error message (hard failure)
function exit_fail() {
echo $1
- kill `jobs -p`
+ kill `jobs -p` >/dev/null 2>/dev/null || true
exit 1
}
@@ -54,7 +54,7 @@ function run_audit () {
if test ${1:-no} = "aggregator"
then
- echo -e "Running exchange aggregator ..."
+ echo -n "Running exchange aggregator ..."
taler-exchange-aggregator -t -c test-auditor.conf
echo " DONE"
fi
@@ -65,7 +65,7 @@ function run_audit () {
taler-wire-auditor -r -c test-auditor.conf -m $MASTER_PUB >
test-wire-audit.json 2> test-wire-audit.log || exit_fail "wire auditor failed"
echo " DONE"
-
+
kill `jobs -p` || true
echo -n "TeXing ..."
@@ -245,7 +245,7 @@ fi
DELTA=`jq -r .total_wire_in_delta_plus < test-wire-audit.json`
if test $DELTA != "TESTKUDOS:5"
then
- exit_fail "Expected total wire delta plus wrong"
+ exit_fail "Expected total wire delta plus wrong, got $DELTA"
fi
echo OK
@@ -324,7 +324,7 @@ test_4() {
echo "===========4: deposit wire target wrong================="
# Original target bank account was 43, changing to 44
-OLD_WIRE=`echo 'SELECT wire FROM deposits WHERE deposit_serial_id=1;' | psql
taler-auditor-test -Aqt`
+OLD_WIRE=`echo 'SELECT wire FROM deposits WHERE deposit_serial_id=1;' | psql
$DB -Aqt`
echo "UPDATE deposits SET
wire='{\"url\":\"payto://x-taler-bank/localhost:8082/44\",\"salt\":\"test-salt\"}'
WHERE deposit_serial_id=1" | psql -Aqt $DB
run_audit
@@ -365,7 +365,7 @@ echo "UPDATE deposits SET wire='$OLD_WIRE' WHERE
deposit_serial_id=1" | psql -Aq
test_5() {
echo "===========5: deposit contract hash wrong================="
# Modify h_wire hash, so it is inconsistent with 'wire'
-OLD_H=`echo 'SELECT h_contract_terms FROM deposits WHERE deposit_serial_id=1;'
| psql taler-auditor-test -Aqt`
+OLD_H=`echo 'SELECT h_contract_terms FROM deposits WHERE deposit_serial_id=1;'
| psql $DB -Aqt`
echo "UPDATE deposits SET
h_contract_terms='\x12bb676444955c98789f219148aa31899d8c354a63330624d3d143222cf3bb8b8e16f69accd5a8773127059b804c1955696bf551dd7be62719870613332aa8d5'
WHERE deposit_serial_id=1" | psql -Aqt $DB
run_audit
@@ -405,8 +405,8 @@ echo "UPDATE deposits SET h_contract_terms='${OLD_H}' WHERE
deposit_serial_id=1"
test_6() {
echo "===========6: known_coins signature wrong================="
# Modify denom_sig, so it is wrong
-OLD_SIG=`echo 'SELECT denom_sig FROM known_coins LIMIT 1;' | psql
taler-auditor-test -Aqt`
-COIN_PUB=`echo "SELECT coin_pub FROM known_coins WHERE denom_sig='$OLD_SIG';"
| psql taler-auditor-test -Aqt`
+OLD_SIG=`echo 'SELECT denom_sig FROM known_coins LIMIT 1;' | psql $DB -Aqt`
+COIN_PUB=`echo "SELECT coin_pub FROM known_coins WHERE denom_sig='$OLD_SIG';"
| psql $DB -Aqt`
echo "UPDATE known_coins SET
denom_sig='\x287369672d76616c200a2028727361200a20202873202335423837314237433930364446433034424244304530393532464136424641324635373031393741313134373537463246323233323946444431463246433334453939394133363634303342334131333244444642394138333538334645363544423743354344453044414530353744383633364345414238344638433238433444463041443630303434304130383534353630393738334344313332393937364236424334373130413246324141324144354138333034324343463141394646353942444343463744
[...]
run_audit
@@ -446,10 +446,10 @@ echo "UPDATE known_coins SET denom_sig='$OLD_SIG' WHERE
coin_pub='$COIN_PUB'" |
test_7() {
echo "===========7: reserves_out signature wrong================="
# Modify reserve_sig, so it is bogus
-HBE=`echo 'SELECT h_blind_ev FROM reserves_out LIMIT 1;' | psql
taler-auditor-test -Aqt`
-OLD_SIG=`echo "SELECT reserve_sig FROM reserves_out WHERE h_blind_ev='$HBE';"
| psql taler-auditor-test -Aqt`
-A_VAL=`echo "SELECT amount_with_fee_val FROM reserves_out WHERE
h_blind_ev='$HBE';" | psql taler-auditor-test -Aqt`
-A_FRAC=`echo "SELECT amount_with_fee_frac FROM reserves_out WHERE
h_blind_ev='$HBE';" | psql taler-auditor-test -Aqt`
+HBE=`echo 'SELECT h_blind_ev FROM reserves_out LIMIT 1;' | psql $DB -Aqt`
+OLD_SIG=`echo "SELECT reserve_sig FROM reserves_out WHERE h_blind_ev='$HBE';"
| psql $DB -Aqt`
+A_VAL=`echo "SELECT amount_with_fee_val FROM reserves_out WHERE
h_blind_ev='$HBE';" | psql $DB -Aqt`
+A_FRAC=`echo "SELECT amount_with_fee_frac FROM reserves_out WHERE
h_blind_ev='$HBE';" | psql $DB -Aqt`
# Normalize, we only deal with cents in this test-case
A_FRAC=`expr $A_FRAC / 1000000`
echo "UPDATE reserves_out SET
reserve_sig='\x9ef381a84aff252646a157d88eded50f708b2c52b7120d5a232a5b628f9ced6d497e6652d986b581188fb014ca857fd5e765a8ccc4eb7e2ce9edcde39accaa4b'
WHERE h_blind_ev='$HBE'" | psql -Aqt $DB
@@ -493,12 +493,202 @@ echo "UPDATE reserves_out SET reserve_sig='$OLD_SIG'
WHERE h_blind_ev='$HBE'" |
}
-# NEXT: wire transfer subject disagreement! (for wire-auditor!)
+# Test wire transfer subject disagreement!
+test_8() {
-# NEXT: wire fee disagreement! (for wire-auditor!)
+echo "===========8: wire-transfer-subject disagreement==========="
+OLD_ID=`echo "SELECT id FROM app_banktransaction WHERE
amount='TESTKUDOS:10.00' ORDER BY id LIMIT 1;" | psql $DB -Aqt`
+OLD_WTID=`echo "SELECT subject FROM app_banktransaction WHERE id='$OLD_ID';" |
psql $DB -Aqt`
+NEW_WTID="CK9QBFY972KR32FVA1MW958JWACEB6XCMHHKVFMCH1A780Q12SVG"
+echo "UPDATE app_banktransaction SET subject='$NEW_WTID' WHERE id='$OLD_ID';"
| psql -Aqt $DB
+run_audit
-# Test where h_wire in the deposit table is wrong
+echo -n "Test for inconsistency detection... "
+DIAG=`jq -r .reserve_in_amount_inconsistencies[0].diagnostic <
test-wire-audit.json`
+if test "x$DIAG" != "xwire subject does not match"
+then
+ exit_fail "Diagnostic wrong: $DIAG (0)"
+fi
+WTID=`jq -r .reserve_in_amount_inconsistencies[0].wtid < test-wire-audit.json`
+if test x$WTID != x"$OLD_WTID" -a x$WTID != x"$NEW_WTID"
+then
+ exit_fail "WTID reported wrong: $WTID"
+fi
+EX_A=`jq -r .reserve_in_amount_inconsistencies[0].amount_exchange_expected <
test-wire-audit.json`
+if test x$WTID = x$OLD_WTID -a x$EX_A != x"TESTKUDOS:10"
+then
+ exit_fail "Amount reported wrong: $EX_A"
+fi
+if test x$WTID = x$NEW_WTID -a x$EX_A != x"TESTKUDOS:0"
+then
+ exit_fail "Amount reported wrong: $EX_A"
+fi
+DIAG=`jq -r .reserve_in_amount_inconsistencies[1].diagnostic <
test-wire-audit.json`
+if test "x$DIAG" != "xwire subject does not match"
+then
+ exit_fail "Diagnostic wrong: $DIAG (1)"
+fi
+WTID=`jq -r .reserve_in_amount_inconsistencies[1].wtid < test-wire-audit.json`
+if test $WTID != "$OLD_WTID" -a $WTID != "$NEW_WTID"
+then
+ exit_fail "WTID reported wrong: $WTID"
+fi
+EX_A=`jq -r .reserve_in_amount_inconsistencies[1].amount_exchange_expected <
test-wire-audit.json`
+if test $WTID = "$OLD_WTID" -a $EX_A != "TESTKUDOS:10"
+then
+ exit_fail "Amount reported wrong: $EX_A"
+fi
+if test $WTID = "$NEW_WTID" -a $EX_A != "TESTKUDOS:0"
+then
+ exit_fail "Amount reported wrong: $EX_A"
+fi
+
+WIRED=`jq -r .total_wire_in_delta_minus < test-wire-audit.json`
+if test $WIRED != "TESTKUDOS:10"
+then
+ exit_fail "Wrong total wire_in_delta_minus, got $WIRED"
+fi
+DELTA=`jq -r .total_wire_in_delta_plus < test-wire-audit.json`
+if test $DELTA != "TESTKUDOS:10"
+then
+ exit_fail "Expected total wire delta plus wrong, got $DELTA"
+fi
+echo OK
+
+# Undo database modification
+echo "UPDATE app_banktransaction SET subject='$OLD_WTID' WHERE id='$OLD_ID';"
| psql -Aqt $DB
+
+}
+
+
+
+# Test wire origin disagreement!
+test_9() {
+
+echo "===========9: wire-origin disagreement==========="
+OLD_ID=`echo "SELECT id FROM app_banktransaction WHERE
amount='TESTKUDOS:10.00' ORDER BY id LIMIT 1;" | psql $DB -Aqt`
+OLD_ACC=`echo "SELECT debit_account_id FROM app_banktransaction WHERE
id='$OLD_ID';" | psql $DB -Aqt`
+echo "UPDATE app_banktransaction SET debit_account_id=1;" | psql -Aqt $DB
+
+run_audit
+
+echo -n "Test for inconsistency detection... "
+AMOUNT=`jq -r .missattribution_in_inconsistencies[0].amount <
test-wire-audit.json`
+if test "x$AMOUNT" != "xTESTKUDOS:10"
+then
+ exit_fail "Reported amount wrong: $AMOUNT"
+fi
+AMOUNT=`jq -r .total_missattribution_in < test-wire-audit.json`
+if test "x$AMOUNT" != "xTESTKUDOS:10"
+then
+ exit_fail "Reported total amount wrong: $AMOUNT"
+fi
+echo OK
+
+# Undo database modification
+echo "UPDATE app_banktransaction SET debit_account_id=$OLD_ACC;" | psql -Aqt
$DB
+
+}
+
+
+# Test wire_in timestamp disagreement!
+test_10() {
+
+echo "===========10: wire-timestamp disagreement==========="
+OLD_ID=`echo "SELECT id FROM app_banktransaction WHERE
amount='TESTKUDOS:10.00' ORDER BY id LIMIT 1;" | psql $DB -Aqt`
+OLD_DATE=`echo "SELECT date FROM app_banktransaction WHERE id='$OLD_ID';" |
psql $DB -Aqt`
+echo "UPDATE app_banktransaction SET date=NOW() WHERE id=$OLD_ID;" | psql -Aqt
$DB
+
+run_audit
+
+echo -n "Test for inconsistency detection... "
+DIAG=`jq -r .row_minor_inconsistencies[0].diagnostic < test-wire-audit.json`
+if test "x$DIAG" != "xexecution date missmatch"
+then
+ exit_fail "Reported diagnostic wrong: $DIAG"
+fi
+TABLE=`jq -r .row_minor_inconsistencies[0].table < test-wire-audit.json`
+if test "x$TABLE" != "xreserves_in"
+then
+ exit_fail "Reported table wrong: $TABLE"
+fi
+echo OK
+
+# Undo database modification
+echo "UPDATE app_banktransaction SET date='$OLD_DATE' WHERE id=$OLD_ID;" |
psql -Aqt $DB
+
+}
+
+
+# Test for extra outgoing wire transfer.
+test_11() {
+
+echo "===========11: spurious outgoing transfer ==========="
+OLD_ID=`echo "SELECT id FROM app_banktransaction WHERE
amount='TESTKUDOS:10.00' ORDER BY id LIMIT 1;" | psql $DB -Aqt`
+OLD_ACC=`echo "SELECT debit_account_id FROM app_banktransaction WHERE
id=$OLD_ID;" | psql $DB -Aqt`
+# Change wire transfer to be FROM the exchange (#2) to elsewhere!
+# (Note: this change also causes a missing incoming wire transfer, but
+# this test is only concerned about the outgoing wire transfer
+# being detected as such, and we simply ignore the other
+# errors being reported.)
+echo "UPDATE app_banktransaction SET debit_account_id=2,credit_account_id=1
WHERE id=$OLD_ID;" | psql -Aqt $DB
+
+run_audit
+
+echo -n "Test for inconsistency detection... "
+AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_wired <
test-wire-audit.json`
+if test "x$AMOUNT" != "xTESTKUDOS:10"
+then
+ exit_fail "Reported amount wrong: $AMOUNT"
+fi
+AMOUNT=`jq -r .total_wire_out_delta_minus < test-wire-audit.json`
+if test "x$AMOUNT" != "xTESTKUDOS:10"
+then
+ exit_fail "Reported amount wrong: $AMOUNT"
+fi
+AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_justified <
test-wire-audit.json`
+if test "x$AMOUNT" != "xTESTKUDOS:0"
+then
+ exit_fail "Reported amount wrong: $AMOUNT"
+fi
+DIAG=`jq -r .wire_out_amount_inconsistencies[0].diagnostic <
test-wire-audit.json`
+if test "x$DIAG" != "xjustification for wire transfer not found"
+then
+ exit_fail "Reported diagnostic wrong: $DIAG"
+fi
+echo OK
+
+# Undo database modification (exchange always has account #2)
+echo "UPDATE app_banktransaction SET
debit_account_id=$OLD_ACC,credit_account_id=2 WHERE id=$OLD_ID;" | psql -Aqt $DB
+
+}
+
+
+# FIXME: Test for wire fee disagreement
+test_98() {
+
+echo "===========11: wire-fee disagreement==========="
+echo "UPDATE wire_fee SET wire_fee_frac='100';" | psql -Aqt $DB
+
+# Wire fees are only checked/generated once there are
+# actual outgoing wire transfers, so we need to run the
+# aggregator here.
+run_audit aggregator
+
+# FIXME: needs new DB where aggregator does stuff!
+# FIXME: check report generation!
+
+# cannot easily undo aggregator, hence full reload
+echo -n "Reloading database ..."
+full_reload
+echo "DONE"
+
+}
+
+
+
+# FIXME: Test where h_wire in the deposit table is wrong
test_99() {
echo "===========99: deposit wire hash wrong================="
# Modify h_wire hash, so it is inconsistent with 'wire'
@@ -515,9 +705,10 @@ run_audit aggregator
# FIXME: check for the respective inconsistency in the report!
-# Undo:
-# echo "UPDATE deposits SET
h_wire='\x973e52d193a357940be9ef2939c19b0575ee1101f52188c3c01d9005b7d755c397e92624f09cfa709104b3b65605fe5130c90d7e1b7ee30f8fc570f39c16b852'
WHERE deposit_serial_id=1" | psql -Aqt $DB
-
+# cannot easily undo aggregator, hence full reload
+echo -n "Reloading database ..."
+full_reload
+echo "DONE"
}
--
To stop receiving notification emails like this one, please contact
address@hidden.
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] [taler-exchange] branch master updated: more auditor tests, misc auditor bugfixes,
gnunet <=