[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] [gnunet] branch master updated (9ffade313 -> 6ec659c53)
From: |
gnunet |
Subject: |
[GNUnet-SVN] [gnunet] branch master updated (9ffade313 -> 6ec659c53) |
Date: |
Wed, 03 Apr 2019 01:04:14 +0200 |
This is an automated email from the git hooks/post-receive script.
ng0 pushed a change to branch master
in repository gnunet.
from 9ffade313 man: fix and adjust uri
new 2732a27b7 man: uri
new 2bcf3d08a man: unindex
new c26a1a7ee man: transport
new 48c611bba man: gnunet-transport-certificate-creation.1
new dff83c5a8 man: timeout
new 04fa73ecf man: testing
new 7de800bc5 man: testing-run-service
new 64750c8e1 man: testing
new 6ec659c53 man: tbp
The 9 revisions listed above as "new" are entirely new to this
repository and will be described in separate emails. The revisions
listed as "add" were already present in the repository and have only
been added to this reference.
Summary of changes:
doc/man/gnunet-testbed-profiler.1 | 101 ++++++++++-------
doc/man/gnunet-testing-run-service.1 | 90 ++++++++-------
doc/man/gnunet-testing.1 | 98 +++++++++-------
doc/man/gnunet-timeout.1 | 72 ++++++------
doc/man/gnunet-transport-certificate-creation.1 | 69 ++++++------
doc/man/gnunet-transport.1 | 142 +++++++++++++-----------
doc/man/gnunet-unindex.1 | 108 ++++++++++--------
doc/man/gnunet-uri.1 | 2 +-
8 files changed, 372 insertions(+), 310 deletions(-)
diff --git a/doc/man/gnunet-testbed-profiler.1
b/doc/man/gnunet-testbed-profiler.1
index 7faacaee4..fe9d713b3 100644
--- a/doc/man/gnunet-testbed-profiler.1
+++ b/doc/man/gnunet-testbed-profiler.1
@@ -1,52 +1,67 @@
-.TH GNUNET\-TESTBED\-PROFILER 1 "September 13, 2014" "GNUnet"
-.SH NAME
-gnunet\-testbed\-profiler \- Profiling driver for the testbed.
-.SH SYNOPSIS
-.B gnunet\-testbed\-profiler
-.RI [ options ]
-.br
-.SH DESCRIPTION
-\fBgnunet\-testbed\-profiler\fP is a command line profiling driver for the
testbed.
-.SH OPTIONS
-.IP "\-c FILENAME, \-\-config=FILENAME"
+.Dd September 13, 2014
+.Dt GNUNET-TESTBED-PROFILER 1
+.Os
+.Sh NAME
+.Nm gnunet-testbed-profiler
+.Nd
+profiling driver for the testbed
+.Sh SYNOPSIS
+.Nm
+.Op Fl c Ar FILENAME | Fl \-config= Ns Ar FILENAME
+.Op Fl e Ar COUNT | Fl \-num-errors= Ns Ar COUNT
+.Op Fl H Ar FILENAME | Fl \-hosts= Ns Ar FILENAME
+.Op Fl h | \-help
+.Op Fl L Ar LOGLEVEL | Fl \-loglevel= Ns Ar LOGLEVEL
+.Op Fl l Ar LOGFILE | Fl \-logfile= Ns Ar LOGFILE
+.Op Fl n | \-non-interactive
+.Op Fl p Ar COUNT | Fl \-num-peers= Ns Ar COUNT
+.Op Fl v | \-version
+.Sh DESCRIPTION
+.Nm
+is a command line profiling driver for the testbed.
+.Sh OPTIONS
+.Bl -tag -width Ds
+.It Fl c Ar FILENAME | Fl \-config= Ns Ar FILENAME
Use the configuration file FILENAME.
-.IP "\-e COUNT, \-\-num\-errors=COUNT"
+.It Fl e Ar COUNT | Fl \-num-errors= Ns Ar COUNT
Tolerate COUNT number of continious timeout failures.
-.IP "\-H FILENAME, \-\-hosts=FILENAME"
+.It Fl H Ar FILENAME | Fl \-hosts= Ns Ar FILENAME
Name of the file with the login information for the testbed.
-.IP "\-h, \-\-help"
+.It Fl h | \-help
Print short help on options.
-.IP "\-L LOGLEVEL, \-\-loglevel=LOGLEVEL"
-Use LOGLEVEL for logging. Valid values are DEBUG, INFO, WARNING and ERROR.
-.IP "\-l LOGFILE, \-\-logfile=LOGFILE"
+.It Fl L Ar LOGLEVEL | Fl \-loglevel= Ns Ar LOGLEVEL
+Use LOGLEVEL for logging.
+Valid values are DEBUG, INFO, WARNING and ERROR.
+.It Fl l Ar LOGFILE | Fl \-logfile= Ns Ar LOGFILE
Configure logging to write logs to LOGFILE.
-.IP "\-n, \-\-non\-interactive"
-Run profiler in non-interactive mode where upon testbed setup the
-profiler does not wait for a keystroke but continues to run until a
-termination signal is received.
-.IP "\-p COUNT, \-\-num\-peers=COUNT"
+.It Fl n | \-non-interactive
+Run profiler in non-interactive mode where upon testbed setup the profiler
does not wait for a keystroke but continues to run until a termination signal
is received.
+.It Fl p Ar COUNT | Fl \-num-peers= Ns Ar COUNT
Create COUNT number of peers.
-.IP "\-v, \-\-version"
+.It Fl v | \-version
Print GNUnet version number.
-.SH BUGS
-Report bugs by using Mantis <https://bugs.gnunet.org/> or by sending
electronic mail to <address@hidden>
-.SH "SEE ALSO"
-The full documentation for
-.B gnunet
-is maintained as a Texinfo manual. If the
-.B info
-and
-.B gnunet
-programs are properly installed at your site, the command
-.IP
-.B info gnunet
-.PP
+.El
+.Sh SEE ALSO
+The full documentation for gnunet is maintained as a Texinfo manual.
+If the
+.Xr info 1
+and gnunet programs are properly installed at your site, the command
+.Pp
+.Dl info gnunet
+.Pp
should give you access to the complete handbook,
-.IP
-.B info gnunet-c-tutorial
-.PP
+.Pp
+.Dl info gnunet-c-tutorial
+.Pp
will give you access to a tutorial for developers.
-.PP
-Depending on your installation, this information is also
-available in
-\fBgnunet\fP(7) and \fBgnunet-c-tutorial\fP(7).
+.sp
+Depending on your installation, this information is also available in
+.Xr gnunet 7 and
+.Xr gnunet-c-tutorial 7 .
+.\".Sh HISTORY
+.\".Sh AUTHORS
+.Sh BUGS
+Report bugs by using
+.Lk https://bugs.gnunet.org
+or by sending electronic mail to
+.Aq Mt address@hidden .
diff --git a/doc/man/gnunet-testing-run-service.1
b/doc/man/gnunet-testing-run-service.1
index 29e6258de..903810c7f 100644
--- a/doc/man/gnunet-testing-run-service.1
+++ b/doc/man/gnunet-testing-run-service.1
@@ -1,49 +1,53 @@
-.TH GNUNET-TESTING-RUN-SERVICE 1 "August 25, 2013" "GNUnet"
-.SH NAME
-gnunet\-testing\-run\-service \- Command line tool to start a service for
testing.
-.SH SYNOPSIS
-.B gnunet\-testing\-run\-service
-.RI [ options ]
-.SH DESCRIPTION
-\fBgnunet\-testing\-run\-service\fP is a command line tool to start a
-service for testing. It starts a peer, running only the service
-specified on the command line, outputs the path to the temporary
-configuration file to stdout.
-.PP
-The peer will run until this program is killed, or stdin is
-closed. When reading the character 'r' from stdin, the running service
-is restarted with the same configuration.
-.PP
-This executable is intended to be used by gnunet-java, in order to
-reliably start and stop services for test cases.
-.SH OPTIONS
-.IP "\-c FILENAME, \-\-config=FILENAME"
+.Dd August 25, 2013
+.Dt GNUNET-TESTING-RUN-SERVICE 1
+.Os
+.Sh NAME
+.Nm gnunet-testing-run-service
+.Nd
+command line tool to start a service for testing
+.Sh SYNOPSIS
+.Nm
+.Op Fl c Ar FILENAME | Fl \-config= Ns Ar FILENAME
+.Op Fl h | \-help
+.Op Fl s Ar SERVICE | Fl \-service= Ns Ar SERVICE
+.Sh DESCRIPTION
+.Nm
+is a command line tool to start a service for testing.
+It starts a peer, running only the service specified on the command line,
outputs the path to the temporary configuration file to stdout.
+.Pp
+The peer will run until this program is killed, or stdin is closed.
+When reading the character 'r' from stdin, the running service is restarted
with the same configuration.
+.Pp
+This executable is intended to be used by gnunet-java, in order to reliably
start and stop services for test cases.
+.Bl -tag -width Ds
+.It Fl c Ar FILENAME | Fl \-config= Ns Ar FILENAME
Name of the template configuration file to use (optional).
-.IP "\-h, \-\-help"
+.It Fl h | \-help
Print short help on options.
-.IP "\-s SERVICE, \-\-service=SERVICE"
+.It Fl s Ar SERVICE | Fl \-service= Ns Ar SERVICE
Name of the service to run.
-.SH BUGS
-Report bugs by using Mantis <https://bugs.gnunet.org/> or by sending
-electronic mail to <address@hidden>
-.SH SEE ALSO
-The full documentation for
-.B gnunet
-is maintained as a Texinfo manual.
+.El
+.Sh SEE ALSO
+The full documentation for gnunet is maintained as a Texinfo manual.
If the
-.B info
-and
-.B gnunet
-programs are properly installed at your site, the command
-.IP
-.B info gnunet
-.PP
+.Xr info 1
+and gnunet programs are properly installed at your site, the command
+.Pp
+.Dl info gnunet
+.Pp
should give you access to the complete handbook,
-.IP
-.B info gnunet-c-tutorial
-.PP
+.Pp
+.Dl info gnunet-c-tutorial
+.Pp
will give you access to a tutorial for developers.
-.PP
-Depending on your installation, this information is also
-available in
-\fBgnunet\fP(7) and \fBgnunet-c-tutorial\fP(7).
+.sp
+Depending on your installation, this information is also available in
+.Xr gnunet 7 and
+.Xr gnunet-c-tutorial 7 .
+.\".Sh HISTORY
+.\".Sh AUTHORS
+.Sh BUGS
+Report bugs by using
+.Lk https://bugs.gnunet.org
+or by sending electronic mail to
+.Aq Mt address@hidden .
diff --git a/doc/man/gnunet-testing.1 b/doc/man/gnunet-testing.1
index 8c5a1f208..182da613d 100644
--- a/doc/man/gnunet-testing.1
+++ b/doc/man/gnunet-testing.1
@@ -1,55 +1,69 @@
-.TH GNUNET\-TESTING 1 "January 4, 2012" "GNUnet"
-.SH NAME
-gnunet\-testing \- Command line tool to access the testing library.
-.SH SYNOPSIS
-.B gnunet\-testing
-.RI [ options ]
-.br
-.SH DESCRIPTION
-\fBgnunet\-testing\fP is a command line tool to access the testing
-library.
-.SH OPTIONS
-.IP "\-C, \-\-cfg"
+.Dd January 4, 2012
+.Dt GNUNET-TESTING 1
+.Os
+.Sh NAME
+.Nm gnunet-testing
+.Nd
+command line tool to access the testing library
+.Sh SYNOPSIS
+.Nm
+.Op Fl C | \-cfg
+.Op Fl c Ar FILENAME | Fl \-config= Ns Ar FILENAME
+.Op Fl H | \-hostkeys
+.Op Fl h | \-help
+.Op Fl k | \-key
+.Op Fl L Ar LOGLEVEL | Fl \-loglevel= Ns Ar LOGLEVEL
+.Op Fl l Ar LOGFILE | Fl \-logfile= Ns Ar LOFILE
+.Op Fl n | \-number
+.Op Fl t | \-template
+.Op Fl v | \-version
+.Sh DESCRIPTION
+.Nm
+is a command line tool to access the testing library.
+.Sh OPTIONS
+.Bl -tag -width Ds
+.It Fl C | \-cfg
Create unique configuration files.
-.IP "\-c FILENAME, \-\-config=FILENAME"
+.It Fl c Ar FILENAME | Fl \-config= Ns Ar FILENAME
Use the configuration file FILENAME.
-.IP "\-H, \-\-hostkeys"
+.It Fl H | \-hostkeys
Host key file.
-.IP "\-h, \-\-help"
+.It Fl h | \-help
Print short help on options.
-.IP "\-k, \-\-key"
+.It Fl k | \-key
Create hostkey files from pre-computed hostkey list.
-.IP "\-L LOGLEVEL, \-\-loglevel=LOGLEVEL"
+.It Fl L Ar LOGLEVEL | Fl \-loglevel= Ns Ar LOGLEVEL
Use LOGLEVEL for logging. Valid values are DEBUG, INFO, WARNING and ERROR.
-.IP "\-l LOGFILE, \-\-logfile=LOGFILE"
+.It Fl l Ar LOGFILE | Fl \-logfile= Ns Ar LOFILE
Configure logging to write logs to LOGFILE.
-.IP "\-n, \-\-number"
+.It Fl n | \-number
Number of unique configuration files or hostkeys to create.
-.IP "\-t, \-\-template"
+.It Fl t | \-template
Configuration template.
-.IP "\-v, \-\-version"
+.It Fl v | \-version
Print GNUnet version number.
-.SH BUGS
-Report bugs by using Mantis <https://bugs.gnunet.org/> or by sending
-electronic mail to <address@hidden>
-.SH SEE ALSO
-The full documentation for
-.B gnunet
-is maintained as a Texinfo manual.
+.El
+.Sh SEE ALSO
+The full documentation for gnunet is maintained as a Texinfo manual.
If the
-.B info
-and
-.B gnunet
-programs are properly installed at your site, the command
-.IP
-.B info gnunet
-.PP
+.Xr info 1
+and gnunet programs are properly installed at your site, the command
+.Pp
+.Dl info gnunet
+.Pp
should give you access to the complete handbook,
-.IP
-.B info gnunet-c-tutorial
-.PP
+.Pp
+.Dl info gnunet-c-tutorial
+.Pp
will give you access to a tutorial for developers.
-.PP
-Depending on your installation, this information is also
-available in
-\fBgnunet\fP(7) and \fBgnunet-c-tutorial\fP(7).
+.sp
+Depending on your installation, this information is also available in
+.Xr gnunet 7 and
+.Xr gnunet-c-tutorial 7 .
+.\".Sh HISTORY
+.\".Sh AUTHORS
+.Sh BUGS
+Report bugs by using
+.Lk https://bugs.gnunet.org
+or by sending electronic mail to
+.Aq Mt address@hidden .
diff --git a/doc/man/gnunet-timeout.1 b/doc/man/gnunet-timeout.1
index 653f211cd..15abfe351 100644
--- a/doc/man/gnunet-timeout.1
+++ b/doc/man/gnunet-timeout.1
@@ -1,36 +1,42 @@
-.TH GNUNET-TIMOUET 1 "June 5, 2018" "GNUnet"
-.SH NAME
-gnunet\-timeout \- run process with timeout
-.SH SYNOPSIS
-.B gnunet\-timeout
-.RI TIMEOUT PROGRAM ARGS
-.SH DESCRIPTION
-\fBgnunet\-timeout\fP can be used to run another process with a
-timeout. Provided as the standard "timout" utility may not be
-available on all platforms.
-.SH BUGS
-Report bugs by using Mantis <https://bugs.gnunet.org/> or by sending
-electronic mail to <address@hidden>
-.SH SEE ALSO
-timeout(1)
-.PP
-The full documentation for
-.B gnunet
-is maintained as a Texinfo manual.
+.Dd June 5, 2018
+.Dt GNUNET-TIMEOUT 1
+.Os
+.Sh NAME
+.Nm gnunet-timeout
+.Nd
+run process with timeout
+.Sh SYNOPSIS
+.Nm
+.Ao Ar duration Ac
+.Ao Ar command Ac
+.Ao args ... Ac
+.Sh DESCRIPTION
+.Nm
+can be used to run another process with a timeout.
+It is provided because the standard "timout" utility may not be available on
all platforms.
+.Sh SEE ALSO
+.Xr timeout 1
+.sp
+The full documentation for gnunet is maintained as a Texinfo manual.
If the
-.B info
-and
-.B gnunet
-programs are properly installed at your site, the command
-.IP
-.B info gnunet
-.PP
+.Xr info 1
+and gnunet programs are properly installed at your site, the command
+.Pp
+.Dl info gnunet
+.Pp
should give you access to the complete handbook,
-.IP
-.B info gnunet-c-tutorial
-.PP
+.Pp
+.Dl info gnunet-c-tutorial
+.Pp
will give you access to a tutorial for developers.
-.PP
-Depending on your installation, this information is also
-available in
-\fBgnunet\fP(7) and \fBgnunet-c-tutorial\fP(7).
+.sp
+Depending on your installation, this information is also available in
+.Xr gnunet 7 and
+.Xr gnunet-c-tutorial 7 .
+.\".Sh HISTORY
+.\".Sh AUTHORS
+.Sh BUGS
+Report bugs by using
+.Lk https://bugs.gnunet.org
+or by sending electronic mail to
+.Aq Mt address@hidden .
diff --git a/doc/man/gnunet-transport-certificate-creation.1
b/doc/man/gnunet-transport-certificate-creation.1
index 9dc572acf..e896363e4 100644
--- a/doc/man/gnunet-transport-certificate-creation.1
+++ b/doc/man/gnunet-transport-certificate-creation.1
@@ -1,35 +1,40 @@
-.TH GNUNET\-TRANSPORT-CERTIFICATE-CREATION 1 "January 31, 2014" "GNUnet"
-.SH NAME
-gnunet\-transport\-certificate\-creation \- create certificate for HTTPS
transport
-.SH SYNOPSIS
-.B gnunet\-transport\-certificate\-creation
-.I privatekey certificate
-.SH DESCRIPTION
-\fBgnunet\-transport\-certificate\-creation\fP uses openssl to generate a RSA
-private key and then a self-signed certificate for HTTPS transport.
-.SH BUGS
-Report bugs by using Mantis <https://bugs.gnunet.org/> or by sending
-electronic mail to <address@hidden>
-.SH SEE ALSO
-gnunet\-transport(1)
-.PP
-The full documentation for
-.B gnunet
-is maintained as a Texinfo manual.
+.Dd January 31, 2014
+.Dt GNUNET-TRANSPORT-CERTIFICATE-CREATION 1
+.Os
+.Sh NAME
+.Nm gnunet-transport-certificate-creation
+.Nd
+create certificate for HTTPS transport
+.Sh SYNOPSIS
+.Nm
+.Op privatekey
+.Op certificate
+.Sh DESCRIPTION
+.Nm
+uses openssl to generate a RSA private key and then a self-signed certificate
for HTTPS transport.
+.Sh SEE ALSO
+.Xr gnunet-transport 1
+.sp
+The full documentation for gnunet is maintained as a Texinfo manual.
If the
-.B info
-and
-.B gnunet
-programs are properly installed at your site, the command
-.IP
-.B info gnunet
-.PP
+.Xr info 1
+and gnunet programs are properly installed at your site, the command
+.Pp
+.Dl info gnunet
+.Pp
should give you access to the complete handbook,
-.IP
-.B info gnunet-c-tutorial
-.PP
+.Pp
+.Dl info gnunet-c-tutorial
+.Pp
will give you access to a tutorial for developers.
-.PP
-Depending on your installation, this information is also
-available in
-\fBgnunet\fP(7) and \fBgnunet-c-tutorial\fP(7).
+.sp
+Depending on your installation, this information is also available in
+.Xr gnunet 7 and
+.Xr gnunet-c-tutorial 7 .
+.\".Sh HISTORY
+.\".Sh AUTHORS
+.Sh BUGS
+Report bugs by using
+.Lk https://bugs.gnunet.org
+or by sending electronic mail to
+.Aq Mt address@hidden .
diff --git a/doc/man/gnunet-transport.1 b/doc/man/gnunet-transport.1
index eef762174..f5ed47ad1 100644
--- a/doc/man/gnunet-transport.1
+++ b/doc/man/gnunet-transport.1
@@ -1,84 +1,92 @@
-.TH GNUNET\-TRANSPORT "1" "October 17, 2015" "GNUnet"
-.SH NAME
-gnunet\-transport \- measure and control the transport subsystem
-.SH SYNOPSIS
-.B gnunet\-transport
-[\fIOPTIONS\fR]
-.SH DESCRIPTION
-.PP
-gnunet\-transport is a tool to access various functions of GNUnet's
-transport subsystem from the command\-line. Most of these are not
-expected to be useful for end-users. gnunet\-transport can be used to
-evaluate the performance of the transports, force a peer to connect to
-another peer (if possible). Other functions should be added in the
-near future.
-.TP
-\fB\-b\fR, \fB\-\-benchmark\fR
-measure how fast we are receiving data (from all connections). On
-exit, the data rate will be reported. Runs until aborted with CTRL-C.
-.TP
-\fB\-D\fR, \fB\-\-disconnect\fR
-force disconnection from a peer (used in conjunction with \-p).
-Note that you can use the gnunet\-ats command\-line tool to suggest connects.
-.TP
-\fB\-c \fIFILENAME\fR, \fB\-\-config=FILENAME\fR
+.Dd October 17, 2015
+.Dt GNUNET-TRANSPORT 1
+.Os
+.Sh NAME
+.Nm gnunet-transport
+.Nd
+measure and control the transport subsystem
+.Sh SYNOPSIS
+.Nm
+.Op Fl b | \-benchmark
+.Op Fl c Ar FILENAME | Fl \-config= Ns Ar FILENAME
+.Op Fl D | \-disconnect
+.Op Fl e | \-events
+.Op Fl h | \-help
+.Op Fl i | \-information
+.Op Fl L Ar LOGLEVEL | Fl \-loglevel= Ns Ar LOGLEVEL
+.Op Fl l Ar LOGFILE | Fl \-logfile= Ns Ar LOGFILE
+.Op Fl m | \-monitor
+.Op Fl p Ar PEER | Fl \-peer= Ns Ar PEER
+.Op Fl P | \-plugins
+.Op Fl s | \-send
+.Op Fl v | \-version
+.Op Fl V | \-verbose
+.Sh DESCRIPTION
+.Nm
+is a tool to access various functions of GNUnet's transport subsystem from the
command-line.
+Most of these are not expected to be useful for end-users.
+gnunet-transport can be used to evaluate the performance of the transports,
force a peer to connect to another peer (if possible).
+Other functions should be added in the near future.
+.Bl -tag -width Ds
+.It Fl b | \-benchmark
+measure how fast we are receiving data (from all connections).
+On exit, the data rate will be reported.
+Runs until aborted with CTRL-C.
+.It Fl c Ar FILENAME | Fl \-config= Ns Ar FILENAME
configuration file to use
-.TP
-\fB\-e \fB\-\-events\fR
+.It Fl D | \-disconnect
+force disconnection from a peer (used in conjunction with \-p).
+Note that you can use the gnunet-ats command-line tool to suggest connects.
+.It Fl e | \-events
provide information about all connect and disconnect events (continuously)
-.TP
-\fB\-h\fR, \fB\-\-help\fR
+.It Fl h | \-help
print help page
-.TP
-\fB\-i\fR, \fB\-\-information\fR
+.It Fl i | \-information
print information about our current connections (once)
-.TP
-\fB\-L \fILOGLEVEL\fR, \fB\-\-loglevel=LOGLEVEL\fR
+.It Fl L Ar LOGLEVEL | Fl \-loglevel= Ns Ar LOGLEVEL
Change the loglevel. Possible values for LOGLEVEL are ERROR, WARNING, INFO
and DEBUG.
-.TP
-\fB\-l \fILOGFILE\fR, \fB\-\-logfile=LOGFILE\fR
+.It Fl l Ar LOGFILE | Fl \-logfile= Ns Ar LOGFILE
configure logging to write logs to LOGFILE
-.TP
-\fB\-m\fR, \fB\-\-monitor\fR
+.It Fl m | \-monitor
print information about our current connections (continuously)
-.TP
-\fB\-p \fIPEER\fR, \fB\-\-peer=PEER\fR
+.It Fl p Ar PEER | Fl \-peer= Ns Ar PEER
the peer identity to connect to or monitor
-.TP
-\fB\-P, \fB\-\-plugins\fR
+.It Fl P | \-plugins
monitor session state of transport plugins
-.TP
-\fB\-s\fR, \fB\-\-send\fR
+.It Fl s | \-send
transmit (dummy) traffic as quickly as possible to the peer specified
with the \-p option. The rate will still be limited by the quota(s)
determined by the peers (ATS subsystem). Will run until CTRL\-C is
pressed or until the connection to the other peer is disrupted.
-.TP
-\fB\-v\fR, \fB\-\-version\fR
+.It Fl v | \-version
print the version number
-.TP
-\fB\-V\fR, \fB\-\-verbose\fR
+.It Fl V | \-verbose
be verbose
-.SH "REPORTING BUGS"
-Report bugs by using mantis <https://bugs.gnunet.org/> or by sending
electronic mail to <address@hidden>
-.SH "SEE ALSO"
-\fBgnunet\-arm\fP(1), \fBgnunet\-ats\fP(1)
-The full documentation for
-.B gnunet
-is maintained as a Texinfo manual. If the
-.B info
-and
-.B gnunet
-programs are properly installed at your site, the command
-.IP
-.B info gnunet
-.PP
+.El
+.Sh SEE ALSO
+.Xr gnunet-arm 1 ,
+.Xr gnunet-ats 1
+.sp
+The full documentation for gnunet is maintained as a Texinfo manual.
+If the
+.Xr info 1
+and gnunet programs are properly installed at your site, the command
+.Pp
+.Dl info gnunet
+.Pp
should give you access to the complete handbook,
-.IP
-.B info gnunet-c-tutorial
-.PP
+.Pp
+.Dl info gnunet-c-tutorial
+.Pp
will give you access to a tutorial for developers.
-.PP
-Depending on your installation, this information is also
-available in
-\fBgnunet\fP(7) and \fBgnunet-c-tutorial\fP(7).
+.sp
+Depending on your installation, this information is also available in
+.Xr gnunet 7 and
+.Xr gnunet-c-tutorial 7 .
+.\".Sh HISTORY
+.\".Sh AUTHORS
+.Sh BUGS
+Report bugs by using
+.Lk https://bugs.gnunet.org
+or by sending electronic mail to
+.Aq Mt address@hidden .
diff --git a/doc/man/gnunet-unindex.1 b/doc/man/gnunet-unindex.1
index 580bdb4c2..e953ce23a 100644
--- a/doc/man/gnunet-unindex.1
+++ b/doc/man/gnunet-unindex.1
@@ -1,57 +1,67 @@
-.TH GNUNET-UNINDEX "1" "September 6, 2009" "GNUnet"
-.SH NAME
-gnunet\-unindex \- a command line interface for deleting indexed files from
GNUnet
-.SH SYNOPSIS
-.B gnunet\-unindex
-[\fIOPTIONS\fR] FILENAME
-.SH DESCRIPTION
-.PP
-gnunet\-unindex is used for deleting indexed files from GNUnet.
-.TP
-\fB\-c \fIFILENAME\fR, \fB\-\-config=FILENAME\fR
-use config file (defaults: ~/.config/gnunet.conf)
-.TP
-\fB\-h\fR, \fB\-\-help\fR
+.Dd September 6, 2009
+.Dt GNUNET-UNINDEX 1
+.Sh NAME
+.Nm gnunet-unindex
+.Nd
+a command line interface for deleting indexed files from GNUnet
+.Sh SYNOPSIS
+.Nm
+.Op Fl c Ar FILENAME | Fl \-config= Ns Ar FILENAME
+.Op Fl h | \-help
+.Op Fl L Ar LOGLEVEL | Fl \-loglevel= Ns Ar LOGLEVEL
+.Op Fl v | \-version
+.Op Fl V | \-verbose
+FILENAME
+.Sh DESCRIPTION
+.Nm
+is used for deleting indexed files from GNUnet.
+.Bl -tag -width Ds
+.It Fl c Ar FILENAME | Fl \-config= Ns Ar FILENAME
+Use config file FILENAME as config (default: ~/.config/gnunet.conf).
+.It Fl h | \-help
print help page
-.TP
-\fB\-L \fILOGLEVEL\fR, \fB\-\-loglevel=LOGLEVEL\fR
-Change the loglevel. Possible values for LOGLEVEL are NOTHING,
-ERROR, WARNING, INFO and DEBUG.
-.TP
-\fB\-v\fR, \fB\-\-version\fR
+.It Fl L Ar LOGLEVEL | Fl \-loglevel= Ns Ar LOGLEVEL
+Change the loglevel.
+Possible values for LOGLEVEL are NOTHING, ERROR, WARNING, INFO and DEBUG.
+.It Fl v | \-version
print the version number
-.TP
-\fB\-V\fR, \fB\-\-verbose\fR
+.It Fl V | \-verbose
be verbose
-.SH NOTES
-You can only unindex files that you indexed and that you still have
-available locally in full. You should use gnunet\-unindex on files
-that you indexed (not inserted) and that you are going to delete or
-move locally.
-.SH FILES
+.El
+.Sh NOTES
+You can only unindex files that you indexed and that you still have available
locally in full.
+You should use gnunet-unindex on files that you indexed (not inserted) and
that you are going to delete or move locally.
+.Sh FILES
.TP
~/.config/gnunet.conf
GNUnet configuration file
-.SH "REPORTING BUGS"
-Report bugs to <https://bugs.gnunet.org/> or by sending electronic mail to
<address@hidden>
-.SH "SEE ALSO"
-\fBgnunet\-fs\-gtk\fP(1), \fBgnunet\-publish\fP(1), \fBgnunet\-search\fP(1),
\fBgnunet\-download\fP(1), \fBgnunet.conf\fP(5)
-The full documentation for
-.B gnunet
-is maintained as a Texinfo manual. If the
-.B info
-and
-.B gnunet
-programs are properly installed at your site, the command
-.IP
-.B info gnunet
-.PP
+.Sh SEE ALSO
+.Xr gnunet-fs-gtk 1 ,
+.Xr gnunet-publish 1 ,
+.Xr gnunet-search 1 ,
+.Xr gnunet-download 1 ,
+.Xr gnunet.conf 5
+.sp
+The full documentation for gnunet is maintained as a Texinfo manual.
+If the
+.Xr info 1
+and gnunet programs are properly installed at your site, the command
+.Pp
+.Dl info gnunet
+.Pp
should give you access to the complete handbook,
-.IP
-.B info gnunet-c-tutorial
-.PP
+.Pp
+.Dl info gnunet-c-tutorial
+.Pp
will give you access to a tutorial for developers.
-.PP
-Depending on your installation, this information is also
-available in
-\fBgnunet\fP(7) and \fBgnunet-c-tutorial\fP(7).
+.sp
+Depending on your installation, this information is also available in
+.Xr gnunet 7 and
+.Xr gnunet-c-tutorial 7 .
+.\".Sh HISTORY
+.\".Sh AUTHORS
+.Sh BUGS
+Report bugs by using
+.Lk https://bugs.gnunet.org
+or by sending electronic mail to
+.Aq Mt address@hidden .
diff --git a/doc/man/gnunet-uri.1 b/doc/man/gnunet-uri.1
index 1dc8caf86..bb525ef7f 100644
--- a/doc/man/gnunet-uri.1
+++ b/doc/man/gnunet-uri.1
@@ -11,7 +11,7 @@ invoke default handler for GNUnet URIs
.Op Fl h | \-help
.Op Fl L Ar LOGLEVEL | Fl \-loglevel= Ns Ar LOGLEVEL
.Op Fl v | \-version
-.Op URI
+URI
.Sh DESCRIPTION
.Nm
can be used to invoke the correct tool to handle a GNUnet URI.
--
To stop receiving notification emails like this one, please contact
address@hidden
- [GNUnet-SVN] [gnunet] branch master updated (9ffade313 -> 6ec659c53),
gnunet <=
- [GNUnet-SVN] [gnunet] 01/09: man: uri, gnunet, 2019/04/02
- [GNUnet-SVN] [gnunet] 02/09: man: unindex, gnunet, 2019/04/02
- [GNUnet-SVN] [gnunet] 05/09: man: timeout, gnunet, 2019/04/02
- [GNUnet-SVN] [gnunet] 07/09: man: testing-run-service, gnunet, 2019/04/02
- [GNUnet-SVN] [gnunet] 03/09: man: transport, gnunet, 2019/04/02
- [GNUnet-SVN] [gnunet] 04/09: man: gnunet-transport-certificate-creation.1, gnunet, 2019/04/02
- [GNUnet-SVN] [gnunet] 06/09: man: testing, gnunet, 2019/04/02
- [GNUnet-SVN] [gnunet] 08/09: man: testing, gnunet, 2019/04/02
- [GNUnet-SVN] [gnunet] 09/09: man: tbp, gnunet, 2019/04/02