[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] [gnunet] branch master updated: Attemot to fix #5134
From: |
gnunet |
Subject: |
[GNUnet-SVN] [gnunet] branch master updated: Attemot to fix #5134 |
Date: |
Mon, 25 Sep 2017 21:58:36 +0200 |
This is an automated email from the git hooks/post-receive script.
ng0 pushed a commit to branch master
in repository gnunet.
The following commit(s) were added to refs/heads/master by this push:
new b5d7a1a11 Attemot to fix #5134
b5d7a1a11 is described below
commit b5d7a1a11c713fbfb33643757a92928867cdad4b
Author: ng0 <address@hidden>
AuthorDate: Mon Sep 25 19:58:22 2017 +0000
Attemot to fix #5134
---
doc/gnunet-c-tutorial.texi | 102 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 100 insertions(+), 2 deletions(-)
diff --git a/doc/gnunet-c-tutorial.texi b/doc/gnunet-c-tutorial.texi
index 4f56ae5c4..3ff822795 100644
--- a/doc/gnunet-c-tutorial.texi
+++ b/doc/gnunet-c-tutorial.texi
@@ -58,6 +58,48 @@ important and do not hesitate to contact the GNUnet team if
you have
any questions or problems! Check here how to contact the GNUnet
team: @uref{https://gnunet.org/contact_information}
address@hidden
+
+* Installing GNUnet:: Installing GNUnet
+* Introduction to GNUnet Architecture:: Introduction to GNUnet Architecture
+* First Steps with GNUnet:: First Steps with GNUnet
+* Developing Applications:: Developing Applications
+
address@hidden
+ --- The Detailed Node Listing ---
+
+Installing GNUnet
+
+* Obtaining a stable version::
+* Installing Build Tool Chain and Dependencies::
+* Obtaining the latest version from Git::
+* Compiling and Installing GNUnet::
+* Common Issues - Check your GNUnet installation::
+
+Introduction to GNUnet Architecture
+
+First Steps with GNUnet
+
+* Configure your peer::
+* Start a peer::
+* Monitor a peer::
+* Starting Two Peers by Hand::
+* Starting Peers Using the Testbed Service::
+
+Developing Applications
+
+* gnunet-ext::
+* Adapting the Template::
+* Writing a Client Application::
+* Writing a Service::
+* Interacting directly with other Peers using the CORE Service::
+* Storing peer-specific data using the PEERSTORE service::
+* Using the DHT::
+* Debugging with gnunet-arm::
+
address@hidden detailmenu
address@hidden menu
+
@node Installing GNUnet
@chapter Installing GNUnet
@@ -150,6 +192,10 @@ $ sudo make install
$ cd ..
@end example
address@hidden
+* Installation::
address@hidden menu
+
@node Installation
@subsection Installation
Assuming all dependencies are installed, the following commands will
@@ -210,8 +256,8 @@ PASS: test_gnunet_prefix
=============
@end example
address@hidden Background: GNUnet Architecture
address@hidden Background: GNUnet Architecture
address@hidden Introduction to GNUnet Architecture
address@hidden Introduction to GNUnet Architecture
GNUnet is organized in layers and services. Each service is composed of a
main service implementation and a client library for other programs to use
@@ -351,6 +397,12 @@ The process is rather painful, but the description is
somewhat instructive.
In practice, you might prefer the automated method
(@pxref{Starting Peers Using the Testbed Service}).
address@hidden
+* Setup a second peer::
+* Start the second peer and connect the peers::
+* How to connect manually::
address@hidden menu
+
@node Setup a second peer
@subsection Setup a second peer
We will now start a second peer on your machine.
@@ -605,6 +657,12 @@ used, which is typically not needed):
@verbatiminclude tutorial-examples/001.c
@end example
address@hidden
+* Handling command-line options::
+* Writing a Client Library::
+* Writing a user interface::
address@hidden menu
+
@node Handling command-line options
@subsection Handling command-line options
@@ -657,6 +715,12 @@ Unique message types must be defined for each message
struct in the
@file{gnunet\_protocols.h} header (or an extension-specific include
file).
address@hidden
+* Connecting to the Service::
+* Sending messages::
+* Receiving Replies from the Service::
address@hidden menu
+
@node Connecting to the Service
@subsubsection Connecting to the Service
@@ -746,6 +810,11 @@ command-line to the service.
Before you can test the client you've written so far, you'll need to also
implement the corresponding service.
address@hidden
+* Code Placement::
+* Starting a Service::
address@hidden menu
+
@node Code Placement
@subsection Code Placement
@@ -810,6 +879,13 @@ is connect to the @code{CORE} service using:
@verbatiminclude tutorial-examples/009.c
@end example
address@hidden
+* New P2P connections::
+* Receiving P2P Messages::
+* Sending P2P Messages::
+* End of P2P connections::
address@hidden menu
+
@node New P2P connections
@subsection New P2P connections
@@ -900,6 +976,13 @@ The first step is to start a connection to the PEERSTORE
service:
The service handle @code{peerstore_handle} will be needed for all subsequent
PEERSTORE operations.
address@hidden
+* Storing records::
+* Retrieving records::
+* Monitoring records::
+* Disconnecting from PEERSTORE::
address@hidden menu
+
@node Storing records
@subsection Storing records
@@ -992,6 +1075,13 @@ The second parameter indicates how many requests in
parallel to expect.
It is not a hard limit, but a good approximation will make the DHT more
efficient.
address@hidden
+* Storing data in the DHT::
+* Obtaining data from the DHT::
+* Implementing a block plugin::
+* Monitoring the DHT::
address@hidden menu
+
@node Storing data in the DHT
@subsection Storing data in the DHT
Since the DHT is a dynamic environment (peers join and leave frequently)
@@ -1049,6 +1139,14 @@ in the service's respective directory. The
mandatory functions that need to be implemented for a block plugin are
described in the following sections.
address@hidden
+* Validating requests and replies::
+* Deriving a key from a reply::
+* Initialization of the plugin::
+* Shutdown of the plugin::
+* Integration of the plugin with the build system::
address@hidden menu
+
@node Validating requests and replies
@subsubsection Validating requests and replies
--
To stop receiving notification emails like this one, please contact
address@hidden
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] [gnunet] branch master updated: Attemot to fix #5134,
gnunet <=