[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] r22923 - gnunet-planetlab/gplmt/contrib
From: |
gnunet |
Subject: |
[GNUnet-SVN] r22923 - gnunet-planetlab/gplmt/contrib |
Date: |
Thu, 26 Jul 2012 15:00:56 +0200 |
Author: wachs
Date: 2012-07-26 15:00:56 +0200 (Thu, 26 Jul 2012)
New Revision: 22923
Added:
gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc8.xml
gnunet-planetlab/gplmt/contrib/deploy_to_tumple_deployment_fc8.conf
Log:
- deployment files for fc8
Added: gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc8.xml
===================================================================
--- gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc8.xml
(rev 0)
+++ gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc8.xml 2012-07-26
13:00:56 UTC (rev 22923)
@@ -0,0 +1,350 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<tasklist name="Deploy GNUnet"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="../tasklist_schema.xsd">
+
+ <run id="0" name="check peer">
+ <!-- Check if peer is working -->
+ <command>sudo date</command>
+ <arguments></arguments>
+ <timeout>10</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output>2012</expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+
+ <sequence enabled="false">
+ <!-- Install buildtools -->
+ <run id="1" name="Install dependencies with yum : gcc">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>gcc</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : make">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>make</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : automake">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>automake</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : autoconf">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>autoconf</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : gettext-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>gettext-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : texinfo">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>texinfo</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : zlib-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>zlib-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence enabled="false">
+ <!-- Install dependencies -->
+ <run id="1" name="Install dependencies with yum : libunistring-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>libunistring-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : gnutls-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>gnutls-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : libgcrypt-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>libgcrypt-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : sqlite-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>sqlite-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : postgresql-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>postgresql-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : mysql-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>mysql-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : libgsf-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>libgsf-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install dependencies with yum : libvorbis-devel">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>libvorbis-devel</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence enabled="false">
+ <!-- Setup subversion -->
+ <run id="1" name="Install dependencies with yum : subversion">
+ <command>sudo yum -y -t --nogpgcheck install</command>
+ <arguments>subversion</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Download GNUnet svn certificate">
+ <command>wget --no-check-certificate</command>
+
<arguments>https://gnunet.org/svn/gnunet-planetlab/gplmt/contrib/gnunet-svn-cert</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>-1</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ <run id="1" name="Install GNUnet svn certificate">
+ <command>mkdir .subversion; mkdir .subversion/auth; mkdir
.subversion/auth/svn.ssl.server; cp gnunet-svn-cert
.subversion/auth/svn.ssl.server/2bd0c10624fe8b217987bb45f1ec55bf</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>-1</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>false</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence enabled="false">
+ <!-- Install depencies from source -->
+ <sequence enabled="true">
+ <!-- Install libtool -->
+ <run id="1" name="Download libtool">
+ <command>mkdir libtool; cd libtool; wget </command>
+
<arguments>http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Unpack libtool">
+ <command>cd libtool; tar xfvz </command>
+ <arguments>libtool-2.4.2.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure libtool">
+ <command>cd libtool/libtool-2.4.2; ./configure </command>
+ <arguments>--prefix=/usr/local </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install libtool">
+ <command>cd libtool/libtool-2.4.2; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <sequence enabled="true">
+ <!-- Install glpk -->
+ <run id="1" name="Download glpk">
+ <command>mkdir glpk; cd glpk; wget </command>
+
<arguments>http://ftp.gnu.org/gnu/glpk/glpk-4.47.tar.gz</arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Unpack glpk">
+ <command>cd glpk; tar -xzvf</command>
+ <arguments>glpk-4.47.tar.gz</arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure glpk">
+ <command>cd glpk/glpk-4.47; ./configure </command>
+ <arguments> --with-gnutls</arguments>
+ <timeout>120</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install glpk">
+ <command>cd glpk/glpk-4.47; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>480</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ </sequence>
+
+ <sequence enabled="true">
+ <!-- Install libgpg -->
+ <run id="1" name="Download libgpg-error">
+ <command>mkdir libgpg-error; cd libgpg-error; wget </command>
+
<arguments>ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.10.tar.bz2</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Unpack libgpg-error">
+ <command>cd libgpg-error; tar -xjvf</command>
+ <arguments>libgpg-error-1.10.tar.bz2</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure libgpg-error">
+ <command>cd libgpg-error/libgpg-error-1.10; ./configure </command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install libgpg-error">
+ <command>cd libgpg-error/libgpg-error-1.10; sudo make
install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+
+ <sequence enabled="false">
+ <!-- Install libextractor -->
+ <run id="1" name="Download libextractor">
+ <command>mkdir libextractor; cd libextractor; wget </command>
+
<arguments>ftp://ftp.gnu.org/gnu/libextractor/libextractor-0.6.3.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Unpack libextractor">
+ <command>cd libextractor; tar -xzvf</command>
+ <arguments>libextractor-0.6.3.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure libextractor">
+ <command>cd libextractor/libextractor-0.6.3; ./configure
</command>
+ <arguments>--prefix=/usr/local </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install libextractor">
+ <command>cd libextractor/libextractor-0.6.3; sudo make
install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <sequence enabled="false">
+ <!-- Install GNUnet from svn -->
+ <run id="1" name="Download GNUnet">
+ <command>svn checkout</command>
+ <arguments> https://gnunet.org/svn/gnunet</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Bootstrap GNUnet">
+ <command>cd gnunet; libtoolize; ./bootstrap</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure GNUnet">
+ <command>cd gnunet; ./configure </command>
+ <arguments>--prefix=$HOME/gnbuild --with-extractor=/usr
--with-mysql=/usr/lib/mysql --enable-logging=verbose</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install GNUnet">
+ <command>cd gnunet; make install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+</tasklist>
Added: gnunet-planetlab/gplmt/contrib/deploy_to_tumple_deployment_fc8.conf
===================================================================
--- gnunet-planetlab/gplmt/contrib/deploy_to_tumple_deployment_fc8.conf
(rev 0)
+++ gnunet-planetlab/gplmt/contrib/deploy_to_tumple_deployment_fc8.conf
2012-07-26 13:00:56 UTC (rev 22923)
@@ -0,0 +1,39 @@
+[gplmt]
+nodes = contrib/test_node_fc8.nodes
+tasks = contrib/deploy_gnunet_fc8.xml
+
+# Which notification mechanism to use:
+# simple: print messages to stdout
+notification = simple
+
+[planetlab]
+slice = tumple_gnunet_deployment_fc12
+
+# Configuration for Planetlab API
+# Use PlanetLab nodes instead of nodes file
+use_pl_nodes = no
+# PlanetLab Europe
+api_url = https://www.planet-lab.eu/PLCAPI/
+# Planetlab
+#api_url = https://www.planet-lab.org/PLCAPI/
+
+# Planetlab username
+username = address@hidden
+# Planetlab password
+password = <password>
+
+[ssh]
+# Order of ssh authentication:
+#
+# The ssh_keyfile_filename passed in (if any)
+# Any key we can find through an SSH agent
+# Any "id_rsa" or "id_dsa" key discoverable in ~/.ssh/
+# Plain password auth, if a ssh_password was given
+
+#ssh_keyfile = <keyfile>
+ssh_password = <password>
+
+# Use system's SSH "known hosts" file
+ssh_use_known_hosts = yes
+# Add node hostkeys automatically
+add_unkown_hostkeys = yes
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] r22923 - gnunet-planetlab/gplmt/contrib,
gnunet <=