[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] r20746 - gnunet
From: |
gnunet |
Subject: |
[GNUnet-SVN] r20746 - gnunet |
Date: |
Sat, 24 Mar 2012 16:36:55 +0100 |
Author: grothoff
Date: 2012-03-24 16:36:55 +0100 (Sat, 24 Mar 2012)
New Revision: 20746
Modified:
gnunet/README
Log:
-fix README to match default ports and proper config values
Modified: gnunet/README
===================================================================
--- gnunet/README 2012-03-24 15:24:38 UTC (rev 20745)
+++ gnunet/README 2012-03-24 15:36:55 UTC (rev 20746)
@@ -221,18 +221,18 @@
In order to hide GNUnet's HTTP/HTTPS traffic perfectly, you might
consider running GNUnet's HTTP/HTTPS transport on port 80/443.
However, we do not recommend running GNUnet as root. Instead, forward
-port 80 to say 8080 with this command (as root, in your startup
+port 80 to say 1080 with this command (as root, in your startup
scripts):
-# iptables -t nat -A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT
--to-ports 8080
+# iptables -t nat -A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT
--to-ports 1080
or for HTTPS
# iptables -t nat -A PREROUTING -p tcp -m tcp --dport 443 -j REDIRECT
--to-ports 4433
-Then set in the HTTP section of gnunet.conf the "ADVERTISED-PORT" to
-"80" and "PORT" to 8080 and similarly in the HTTPS section the
-"ADVERTISED-PORT" to "443" and "PORT" to 4433.
+Then set in the HTTP section of gnunet.conf the "ADVERTISED_PORT" to
+"80" and "PORT" to 1080 and similarly in the HTTPS section the
+"ADVERTISED_PORT" to "443" and "PORT" to 4433.
You can do the same trick for the TCP and UDP transports if you want
to map them to a priviledged port (from the point of view of the
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] r20746 - gnunet,
gnunet <=