apollo1@apollo1-15IKB:~$ sudo apt install git libtool autoconf autopoint \ > build-essential libgcrypt-dev libidn11-dev zlib1g-dev \ > libunistring-dev libglpk-dev miniupnpc libextractor-dev \ > libjansson-dev libcurl4-gnutls-dev gnutls-bin libsqlite3-dev \ > openssl libnss3-tools libmicrohttpd-dev libopus-dev libpulse-dev \ > libogg-dev Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting 'libgcrypt20-dev' instead of 'libgcrypt-dev' autoconf is already the newest version (2.69-11). build-essential is already the newest version (12.4ubuntu1). libjansson-dev is already the newest version (2.11-1). libogg-dev is already the newest version (1.3.2-1). libopus-dev is already the newest version (1.1.2-1ubuntu1). libtool is already the newest version (2.4.6-2). zlib1g-dev is already the newest version (1:1.2.11.dfsg-0ubuntu2). libextractor-dev is already the newest version (1:1.6-2). libglpk-dev is already the newest version (4.65-1). libmicrohttpd-dev is already the newest version (0.9.59-1). miniupnpc is already the newest version (1.9.20140610-4ubuntu2). autopoint is already the newest version (0.19.8.1-6ubuntu0.3). git is already the newest version (1:2.17.1-1ubuntu0.5). libcurl4-gnutls-dev is already the newest version (7.58.0-2ubuntu3.8). libgcrypt20-dev is already the newest version (1.8.1-4ubuntu1.1). libidn11-dev is already the newest version (1.33-2.1ubuntu1.2). libsqlite3-dev is already the newest version (3.22.0-1ubuntu0.2). libunistring-dev is already the newest version (0.9.9-0ubuntu2). openssl is already the newest version (1.1.1-1ubuntu2.1~18.04.5). gnutls-bin is already the newest version (3.5.18-1ubuntu1.1). libnss3-tools is already the newest version (2:3.35-2ubuntu2.6). libpulse-dev is already the newest version (1:11.1-1ubuntu7.5). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. apollo1@apollo1-15IKB:~$ mkdir ~/gnunet_installation mkdir: cannot create directory ‘/home/apollo1/gnunet_installation’: File exists apollo1@apollo1-15IKB:~$ cd ~/gnunet_installation apollo1@apollo1-15IKB:~/gnunet_installation$ git clone --depth 1 https://gnunet.org/git/gnunet.git Cloning into 'gnunet'... warning: redirecting to https://git.gnunet.org/gnunet.git/ remote: Enumerating objects: 2268, done. remote: Counting objects: 100% (2268/2268), done. remote: Compressing objects: 100% (2030/2030), done. remote: Total 2268 (delta 501), reused 783 (delta 189) Receiving objects: 100% (2268/2268), 17.28 MiB | 360.00 KiB/s, done. Resolving deltas: 100% (501/501), done. apollo1@apollo1-15IKB:~/gnunet_installation$ cd ~/gnunet_installation/gnunet apollo1@apollo1-15IKB:~/gnunet_installation/gnunet$ ./bootstrap Removing folder 'libltdl'... Submodule 'contrib/build-common' (https://git.taler.net/build-common.git) registered for path 'contrib/build-common' Cloning into '/home/apollo1/gnunet_installation/gnunet/contrib/build-common'... Submodule path 'contrib/build-common': checked out '1915a74bbb4cd2ae9bc541a382dfebc37064a2fd' Synchronizing submodule url for 'contrib/build-common' Installing uncrustify hook and configuration Installing yapf symlink checking for libtoolize / libtool... Creating directory build-aux Copying file build-aux/config.rpath Copying file m4/wchar_t.m4 libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'. libtoolize: copying file 'build-aux/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:45: installing 'build-aux/compile' configure.ac:36: installing 'build-aux/config.guess' configure.ac:36: installing 'build-aux/config.sub' configure.ac:39: installing 'build-aux/install-sh' configure.ac:39: installing 'build-aux/missing' Makefile.am: installing './INSTALL' contrib/Makefile.am: installing 'build-aux/depcomp' parallel-tests: installing 'build-aux/test-driver' doc/handbook/Makefile.am:63: installing 'build-aux/mdate-sh' doc/handbook/Makefile.am:63: installing 'build-aux/texinfo.tex' /usr/share/automake-1.15/am/texinfos.am: warning: AM_MAKEINFOHTMLFLAGS was already defined in condition !ACTIVATE_TEXINFO4, which is included in condition TRUE ... doc/handbook/Makefile.am:23: ... 'AM_MAKEINFOHTMLFLAGS' previously defined here /usr/share/automake-1.15/am/texinfos.am: warning: AM_MAKEINFOHTMLFLAGS was already defined in condition !ACTIVATE_TEXINFO4, which is included in condition TRUE ... doc/tutorial/Makefile.am:21: ... 'AM_MAKEINFOHTMLFLAGS' previously defined here apollo1@apollo1-15IKB:~/gnunet_installation/gnunet$ export GNUNET_PREFIX=/usr/local apollo1@apollo1-15IKB:~/gnunet_installation/gnunet$ export CFLAGS="-g -Wall -O0" apollo1@apollo1-15IKB:~/gnunet_installation/gnunet$ ./configure --prefix=$GNUNET_PREFIX --disable-documentation --enable-logging=verbose checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking target system type... x86_64-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking for gawk... (cached) mawk checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking for gcc option to accept ISO C99... none needed checking for gcc... gcc checking whether we are using the GNU Objective C compiler... no checking whether gcc accepts -g... no checking dependency style of gcc... gcc3 checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... no checking for dlopen in -ldl... yes checking whether a program can dlopen itself... yes checking whether a statically linked program can dlopen itself... no checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for _LARGEFILE_SOURCE value needed for large files... no checking whether cc can use -fno-strict-aliasing... checking if gcc supports -Wno-address-of-packed-member flag... no checking for X... no checking for build target... linux checking whether unaligned 64-bit access works... yes checking for library containing gethostbyname... none required checking for library containing memrchr... none required checking for library containing memset_s... no checking for library containing memset_s... (cached) no checking for socket in -lsocket... no checking for log in -lm... yes checking for getloadavg in -lc... yes checking for getopt... true checking for pkgconf,... no checking for pkg-config... pkg-config checking for ssh... true checking for SSH key... ssh: connect to host 127.0.0.1 port 22: Connection refused checking for a Python interpreter with version >= 3.4... python3 checking for python3... /usr/bin/python3 checking for python3 version... 3.6 checking for python3 platform... linux checking for python3 script directory... ${prefix}/lib/python3.6/site-packages checking for python3 extension module directory... ${exec_prefix}/lib/python3.6/site-packages checking for perl... /usr/bin/perl checking for awk... /usr/bin/awk checking whether to install gnunet-logread... no checking for -iptables... no checking for iptables... /sbin/iptables checking for -ip6tables... no checking for ip6tables... /sbin/ip6tables checking for -ip... no checking for ip... /sbin/ip checking for -ifconfig... no checking for ifconfig... /sbin/ifconfig checking for ifconfig... /sbin/ifconfig checking for adduser... /usr/sbin/adduser checking for -sysctl... no checking for sysctl... /sbin/sysctl checking for sysctl... /sbin/sysctl checking for -upnpc... no checking for upnpc... /usr/bin/upnpc checking for checkbashisms... no checking for checkbashisms.pl... no checking for uncrustify... true checking for yapf... yapf checking for struct tm.tm_gmtoff... yes checking for getaddrinfo_a in -lanl... yes checking for libgcrypt-config... /usr/local/bin/libgcrypt-config checking for LIBGCRYPT - version >= 1.6.0... yes (1.7.6) checking LIBGCRYPT API version... okay checking whether gcry_mpi_set_opaque_copy is declared... yes checking whether struct in6_ifreq is declared... no checking if_tun.h usability... no checking if_tun.h presence... no checking for if_tun.h... no checking linux/if_tun.h usability... yes checking linux/if_tun.h presence... yes checking for linux/if_tun.h... yes checking whether to build documentation... no checking whether to include generated texi2mdoc output in installation... no checking for texi2mdoc binary... checking for texi2mdoc... no checking for texi2man perl script... checking for texi2man... no checking for mandoc binary... checking for mandoc... no checking whether to build only documentation... no checking whether to include man pages... yes checking whether to enable texinfo4 switches... no checking whether to poison freed memory... defaults to yes (extra logging is enabled) checking for working HMAC... yes checking for libbluetooth... --with-libbluetooth not specified checking for ba2str in -lbluetooth... no configure: WARNING: bluetooth not found checking for libzbar... --with-zbar not specified checking for zbar_processor_create in -lzbar... no configure: WARNING: zbar not found checking for libjansson... --with-jansson not specified checking for json_loads in -ljansson... yes checking jansson.h usability... yes checking jansson.h presence... yes checking for jansson.h... yes configure: jansson was found checking for libpulse... --with-libpulse not specified checking for pa_stream_peek in -lpulse... yes checking pulse/simple.h usability... yes checking pulse/simple.h presence... yes checking for pulse/simple.h... yes configure: libpulse was found checking for libopus... --with-libopus not specified checking for opus_decode_float in -lopus... yes checking opus/opus.h usability... yes checking opus/opus.h presence... yes checking for opus/opus.h... yes checking whether OPUS_SET_GAIN is declared... yes configure: libopus was found checking for libogg... --with-libogg not specified checking for ogg_stream_flush_fill in -logg... yes checking ogg/ogg.h usability... yes checking ogg/ogg.h presence... yes checking for ogg/ogg.h... yes configure: libogg was found checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for GLIB... yes checking pbc/pbc.h usability... no checking pbc/pbc.h presence... no checking for pbc/pbc.h... no checking gabe.h usability... no checking gabe.h presence... no checking for gabe.h... no checking for gstreamer... checking for GST... no checking conversation feature set to build... checking for gawk... (cached) mawk checking for gnurl-config... no checking whether libgnurl is usable... no checking for gawk... (cached) mawk checking for curl-config... /usr/bin/curl-config checking for the version of libcurl... 7.58.0 checking for libcurl >= version 7.34.0... yes checking whether libcurl is usable... yes checking for curl_free... yes checking curl/curl.h usability... yes checking curl/curl.h presence... yes checking for curl/curl.h... yes checking whether CURLINFO_TLS_SESSION is declared... yes checking for curl_easy_getinfo in -lcurl-gnutls... yes checking for library containing __atomic_load_8... -latomic checking nss.h usability... yes checking nss.h presence... yes checking for nss.h... yes checking whether NSS_STATUS_UNAVAIL is declared... yes checking for kvm_open in -lkvm... no checking for kstat_open in -lkstat... no checking whether to compile GNU Taler Wallet library ONLY... no checking for libextractor... --with-extractor not specified checking extractor.h usability... yes checking extractor.h presence... yes checking for extractor.h... yes checking for EXTRACTOR_plugin_add_defaults in -lextractor... yes checking for libltdl... --with-ltdl not specified checking ltdl.h usability... yes checking ltdl.h presence... yes checking for ltdl.h... yes checking for lt_dlopenext in -lltdl... yes libltdl found checking for idn or idn2... checking for idn... checking idna.h usability... yes checking idna.h presence... yes checking for idna.h... yes configure: Found idna.h checking for idn2... checking idn2.h usability... yes checking idn2.h presence... yes checking for idn2.h... yes configure: Found idn2.h checking if libidn can be used... configure: Checking for libidn2 checking for idn2_to_unicode_8z8z in -lidn2... yes checking zlib.h usability... yes checking zlib.h presence... yes checking for zlib.h... yes checking for compress2 in -lz... yes checking for ld used by gcc... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking for shared library run path origin... done checking for iconv... yes checking for working iconv... yes checking for iconv declaration... extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); checking for libunistring... yes checking how to link with libunistring... -lunistring checking for libunistring version... 0.9.9 checking unistr.h usability... yes checking unistr.h presence... yes checking for unistr.h... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for ANSI C header files... (cached) yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking math.h usability... yes checking math.h presence... yes checking for math.h... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking stdio.h usability... yes checking stdio.h presence... yes checking for stdio.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for unistd.h... (cached) yes checking stdarg.h usability... yes checking stdarg.h presence... yes checking for stdarg.h... yes checking signal.h usability... yes checking signal.h presence... yes checking for signal.h... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for sys/stat.h... (cached) yes checking for sys/types.h... (cached) yes checking stdatomic.h usability... yes checking stdatomic.h presence... yes checking for stdatomic.h... yes checking malloc.h usability... yes checking malloc.h presence... yes checking for malloc.h... yes checking malloc/malloc.h usability... no checking malloc/malloc.h presence... no checking for malloc/malloc.h... no checking malloc/malloc_np.h usability... no checking malloc/malloc_np.h presence... no checking for malloc/malloc_np.h... no checking langinfo.h usability... yes checking langinfo.h presence... yes checking for langinfo.h... yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking sys/mount.h usability... yes checking sys/mount.h presence... yes checking for sys/mount.h... yes checking sys/statvfs.h usability... yes checking sys/statvfs.h presence... yes checking for sys/statvfs.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sockLib.h usability... no checking sockLib.h presence... no checking for sockLib.h... no checking sys/mman.h usability... yes checking sys/mman.h presence... yes checking for sys/mman.h... yes checking sys/msg.h usability... yes checking sys/msg.h presence... yes checking for sys/msg.h... yes checking sys/vfs.h usability... yes checking sys/vfs.h presence... yes checking for sys/vfs.h... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking for fcntl.h... (cached) yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking kstat.h usability... no checking kstat.h presence... no checking for kstat.h... no checking sys/sysinfo.h usability... yes checking sys/sysinfo.h presence... yes checking for sys/sysinfo.h... yes checking kvm.h usability... no checking kvm.h presence... no checking for kvm.h... no checking sys/file.h usability... yes checking sys/file.h presence... yes checking for sys/file.h... yes checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking ifaddrs.h usability... yes checking ifaddrs.h presence... yes checking for ifaddrs.h... yes checking mach/mach.h usability... no checking mach/mach.h presence... no checking for mach/mach.h... no checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking sys/timeb.h usability... yes checking sys/timeb.h presence... yes checking for sys/timeb.h... yes checking argz.h usability... yes checking argz.h presence... yes checking for argz.h... yes checking ucred.h usability... no checking ucred.h presence... no checking for ucred.h... no checking sys/ucred.h usability... no checking sys/ucred.h presence... no checking for sys/ucred.h... no checking endian.h usability... yes checking endian.h presence... yes checking for endian.h... yes checking sys/endian.h usability... no checking sys/endian.h presence... no checking for sys/endian.h... no checking execinfo.h usability... yes checking execinfo.h presence... yes checking for execinfo.h... yes checking byteswap.h usability... yes checking byteswap.h presence... yes checking for byteswap.h... yes checking for sys/types.h... (cached) yes checking for netinet/in_systm.h... yes checking for netinet/in.h... (cached) yes checking for netinet/ip.h... yes checking for SQLite... --with-sqlite not specified checking sqlite3.h usability... yes checking sqlite3.h presence... yes checking for sqlite3.h... yes checking for pkg-config... (cached) /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for the PostgreSQL libraries CPPFLAGS... Package libpq was not found in the pkg-config search path. Perhaps you should add the directory containing `libpq.pc' to the PKG_CONFIG_PATH environment variable No package 'libpq' found checking for the pg_config program... no postgres checking for sigset_t... yes checking for off_t... yes checking for size_t... yes checking for mysql... --with-mysql not specified checking for mysql_init in -lmysqlclient... no checking for MHD... no configure: WARNING: Building without libmicrohttpd checking whether NLS is requested... yes checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for pid_t... yes checking for size_t... (cached) yes checking for mode_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether stat file-mode macros are broken... no checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for struct sockaddr_in.sin_len... no checking for struct sockaddr_un.sun_len... no checking whether closedir returns void... no checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking whether gcc needs -traditional... no checking for working memcmp... yes checking for sys/select.h... (cached) yes checking for sys/socket.h... (cached) yes checking types of arguments for select... int,fd_set *,struct timeval * checking for uid_t in sys/types.h... yes checking for unistd.h... (cached) yes checking for working chown... yes checking return type of signal handlers... void checking whether lstat correctly handles trailing slash... yes checking whether stat accepts an empty string... no checking for strftime... yes checking for vprintf... yes checking for _doprnt... no checking for sys/wait.h that is POSIX.1 compatible... yes checking for off_t... (cached) yes checking for uid_t in sys/types.h... (cached) yes checking for atoll... yes checking for stat64... yes checking for strnlen... yes checking for mremap... yes checking for getrlimit... yes checking for setrlimit... yes checking for sysconf... yes checking for initgroups... yes checking for strndup... yes checking for gethostbyname2... yes checking for getpeerucred... no checking for getpeereid... no checking for setresuid... yes checking for getnameinfo... yes checking for gethostname... yes checking for gethostbyname... yes checking for gethostbyaddr... yes checking for getaddrinfo... yes checking for getaddrinfo_a... no checking for getifaddrs... yes checking for freeifaddrs... yes checking for getresgid... yes checking for mallinfo... yes checking for malloc_size... no checking for malloc_usable_size... yes checking for getrusage... yes checking for random... yes checking for srandom... yes checking for stat... yes checking for statfs... yes checking for statvfs... yes checking for wait4... yes checking for sudo... no checking for doas... checking for doas... no checking for gnunetdns group name... gnunetdns checking for gnutls... --with-gnutls not specified checking gnutls/abstract.h usability... yes checking gnutls/abstract.h presence... yes checking for gnutls/abstract.h... yes checking for gnutls_priority_set in -lgnutls... yes checking gnutls/dane.h usability... yes checking gnutls/dane.h presence... yes checking for gnutls/dane.h... yes checking for dane_verify_crt_raw in -lgnutls-dane... yes checking if GNUnet is being configured to run on the SuperMUC... checking if NSE has to send timestamp information to testbed logger... no checking whether to run tests... checking whether to compile in benchmarks (currently for http and crypto)... no checking whether to run expensive tests... no checking whether to enable ports for gnunet-java... no checking whether to run benchmarks during make check... no checking whether to compile gnunet-testing... yes checking whether to compile experimental code... no checking whether to compile malicious code... no checking whether to start peer's services on demand by default... yes checking whether to create expensive statistics on memory use... 0 checking whether __thread is supported... yes checking whether to compile with support for code coverage analysis... no checking for svnversion... no checking for git... /usr/bin/git checking for source being under a VCS... checking for git... (cached) /usr/bin/git checking for source being under a VCS... yes, git-svn checking VCS version... "git-d554b80" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating bin/Makefile config.status: creating contrib/Makefile config.status: creating contrib/hellos/Makefile config.status: creating contrib/services/Makefile config.status: creating contrib/services/openrc/Makefile config.status: creating contrib/services/systemd/Makefile config.status: creating contrib/scripts/Makefile config.status: creating contrib/scripts/gnunet-logread/Makefile config.status: creating doc/Makefile config.status: creating doc/man/Makefile config.status: creating doc/doxygen/Makefile config.status: creating doc/handbook/Makefile config.status: creating doc/tutorial/Makefile config.status: creating m4/Makefile config.status: creating po/Makefile.in config.status: creating src/Makefile config.status: creating src/arm/Makefile config.status: creating src/arm/arm.conf config.status: creating src/ats/Makefile config.status: creating src/ats/ats.conf config.status: creating src/ats-tool/Makefile config.status: creating src/ats-tests/Makefile config.status: creating src/auction/Makefile config.status: creating src/block/Makefile config.status: creating src/cadet/Makefile config.status: creating src/cadet/cadet.conf config.status: creating src/core/Makefile config.status: creating src/core/core.conf config.status: creating src/consensus/Makefile config.status: creating src/consensus/consensus.conf config.status: creating src/conversation/Makefile config.status: creating src/conversation/conversation.conf config.status: creating src/curl/Makefile config.status: creating src/datacache/Makefile config.status: creating src/datastore/Makefile config.status: creating src/datastore/datastore.conf config.status: creating src/dht/Makefile config.status: creating src/dht/dht.conf config.status: creating src/dns/Makefile config.status: creating src/dns/dns.conf config.status: creating src/exit/Makefile config.status: creating src/fragmentation/Makefile config.status: creating src/fs/Makefile config.status: creating src/fs/fs.conf config.status: creating src/gns/Makefile config.status: creating src/gns/gns.conf config.status: creating src/gns/nss/Makefile config.status: creating src/gnsrecord/Makefile config.status: creating src/hello/Makefile config.status: creating src/identity/Makefile config.status: creating src/identity/identity.conf config.status: creating src/abd/Makefile config.status: creating src/abd/abd.conf config.status: creating src/include/Makefile config.status: creating src/integration-tests/Makefile config.status: creating src/json/Makefile config.status: creating src/hostlist/Makefile config.status: creating src/my/Makefile config.status: creating src/mysql/Makefile config.status: creating src/namecache/Makefile config.status: creating src/namecache/namecache.conf config.status: creating src/namestore/Makefile config.status: creating src/namestore/namestore.conf config.status: creating src/nat/Makefile config.status: creating src/nat/nat.conf config.status: creating src/nat-auto/Makefile config.status: creating src/nat-auto/nat-auto.conf config.status: creating src/nse/Makefile config.status: creating src/nse/nse.conf config.status: creating src/nt/Makefile config.status: creating src/peerinfo/Makefile config.status: creating src/peerinfo/peerinfo.conf config.status: creating src/peerinfo-tool/Makefile config.status: creating src/peerstore/Makefile config.status: creating src/peerstore/peerstore.conf config.status: creating src/pq/Makefile config.status: creating src/pt/Makefile config.status: creating src/regex/Makefile config.status: creating src/regex/regex.conf config.status: creating src/revocation/Makefile config.status: creating src/revocation/revocation.conf config.status: creating src/rps/Makefile config.status: creating src/rps/rps.conf config.status: creating src/secretsharing/Makefile config.status: creating src/secretsharing/secretsharing.conf config.status: creating src/scalarproduct/Makefile config.status: creating src/scalarproduct/scalarproduct.conf config.status: creating src/set/Makefile config.status: creating src/set/set.conf config.status: creating src/sq/Makefile config.status: creating src/statistics/Makefile config.status: creating src/statistics/statistics.conf config.status: creating src/template/Makefile config.status: creating src/testbed/Makefile config.status: creating src/testbed/testbed.conf config.status: creating src/testbed-logger/Makefile config.status: creating src/testbed-logger/testbed-logger.conf config.status: creating src/testing/Makefile config.status: creating src/topology/Makefile config.status: creating src/transport/Makefile config.status: creating src/transport/transport.conf config.status: creating src/util/Makefile config.status: creating src/util/resolver.conf config.status: creating src/vpn/Makefile config.status: creating src/vpn/vpn.conf config.status: creating src/zonemaster/Makefile config.status: creating src/zonemaster/zonemaster.conf config.status: creating src/rest/Makefile config.status: creating src/abe/Makefile config.status: creating src/reclaim-attribute/Makefile config.status: creating src/reclaim/Makefile config.status: creating pkgconfig/Makefile config.status: creating pkgconfig/gnunetarm.pc config.status: creating pkgconfig/gnunetats.pc config.status: creating pkgconfig/gnunetblock.pc config.status: creating pkgconfig/gnunetcadet.pc config.status: creating pkgconfig/gnunetconsensus.pc config.status: creating pkgconfig/gnunetconversation.pc config.status: creating pkgconfig/gnunetcore.pc config.status: creating pkgconfig/gnunetdatacache.pc config.status: creating pkgconfig/gnunetdatastore.pc config.status: creating pkgconfig/gnunetdht.pc config.status: creating pkgconfig/gnunetdns.pc config.status: creating pkgconfig/gnunetenv.pc config.status: creating pkgconfig/gnunetfragmentation.pc config.status: creating pkgconfig/gnunetfs.pc config.status: creating pkgconfig/gnunetgns.pc config.status: creating pkgconfig/gnunethello.pc config.status: creating pkgconfig/gnunetidentity.pc config.status: creating pkgconfig/gnunetmicrophone.pc config.status: creating pkgconfig/gnunetmysql.pc config.status: creating pkgconfig/gnunetnamestore.pc config.status: creating pkgconfig/gnunetnat.pc config.status: creating pkgconfig/gnunetnse.pc config.status: creating pkgconfig/gnunetpeerinfo.pc config.status: creating pkgconfig/gnunetpq.pc config.status: creating pkgconfig/gnunetregex.pc config.status: creating pkgconfig/gnunetrevocation.pc config.status: creating pkgconfig/gnunetrps.pc config.status: creating pkgconfig/gnunetscalarproduct.pc config.status: creating pkgconfig/gnunetset.pc config.status: creating pkgconfig/gnunetspeaker.pc config.status: creating pkgconfig/gnunetstatistics.pc config.status: creating pkgconfig/gnunettestbed.pc config.status: creating pkgconfig/gnunettesting.pc config.status: creating pkgconfig/gnunettransport.pc config.status: creating pkgconfig/gnunetutil.pc config.status: creating pkgconfig/gnunetvpn.pc config.status: creating gnunet_config.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile configure: zbar not found, gnunet-qr will not be built. configure: libgnurl not found, trying to use libcurl-gnutls instead. configure: bluetooth library not found, will not be able to use Bluetooth configure: GNUnet Configuration ==================== GNUnet version: 0.11.8 Host setup: x86_64-pc-linux-gnu Install prefix: /usr/local Compiler: gcc CFLAGS: -fno-strict-aliasing -Wall -g -Wall -O0 -I/usr/local/include CPPFLAGS: LDFLAGS: -Wl,--unresolved-symbols=report-all LIBS: -lm Build Target: linux Mac OSX framework build: no Default Interface: eth0 MySQL: no PostgreSQL: no sqlite3: yes gnurl: curl: yes bluetooth: no (optional) jansson: yes iptables: yes ifconfig: yes upnpc: yes gnutls: yes (with DANE support) libzbar: no java: libmicrohttpd: no (optional) libidn: libidn2 libopus: yes gstreamer: no libpulse: yes libextractor: yes texi2mdoc: yes mandoc: yes texinfo manual: no transpiled mdocml manual: no features: conversation sqlite experimental: configure: WARNING: Please make sure NOW to create a user and group 'gnunet' and additionally a group 'gnunetdns'. Make sure that '/var/lib/gnunet' is owned (and writable) by user 'gnunet'. configure: To do this on this system, run: # addgroup gnunetdns # adduser --system --disabled-login --home /var/lib/gnunet gnunet configure: WARNING: Each user of GNUnet should be added to the 'gnunet' group. configure: To do this on this system, run: # adduser USERNAME gnunet for each of your users, replacing "USERNAME" with the respective login name. Users may have to login again for the changes to take effect. configure: For detailed setup instructions, type 'info gnunet' after the installation or visit https://docs.gnunet.org/ apollo1@apollo1-15IKB:~/gnunet_installation/gnunet$ sudo addgroup gnunet addgroup: The group `gnunet' already exists. apollo1@apollo1-15IKB:~/gnunet_installation/gnunet$ sudo usermod -aG gnunet $USER apollo1@apollo1-15IKB:~/gnunet_installation/gnunet$ make -j$(nproc || echo -n 1) make all-recursive make[1]: Entering directory '/home/apollo1/gnunet_installation/gnunet' Making all in m4 make[2]: Entering directory '/home/apollo1/gnunet_installation/gnunet/m4' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/apollo1/gnunet_installation/gnunet/m4' Making all in bin make[2]: Entering directory '/home/apollo1/gnunet_installation/gnunet/bin' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/apollo1/gnunet_installation/gnunet/bin' Making all in src make[2]: Entering directory '/home/apollo1/gnunet_installation/gnunet/src' Making all in include make[3]: Entering directory '/home/apollo1/gnunet_installation/gnunet/src/include' Making all in . make[4]: Entering directory '/home/apollo1/gnunet_installation/gnunet/src/include' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/home/apollo1/gnunet_installation/gnunet/src/include' make[3]: Leaving directory '/home/apollo1/gnunet_installation/gnunet/src/include' Making all in util make[3]: Entering directory '/home/apollo1/gnunet_installation/gnunet/src/util' CC bandwidth.lo CC bio.lo CC client.lo CC common_allocation.lo CC common_endian.lo CC configuration.lo CC common_logging.lo CC configuration_loader.lo CC container_bloomfilter.lo CC container_heap.lo CC container_meta_data.lo CC container_multihashmap.lo CC container_multishortmap.lo CC container_multiuuidmap.lo CC container_multihashmap32.lo CC container_multipeermap.lo CC crypto_symmetric.lo CC crypto_crc.lo CC crypto_ecc.lo CC crypto_ecc_dlog.lo CC crypto_ecc_setup.lo CC crypto_hash.lo CC crypto_hash_file.lo CC crypto_hkdf.lo CC crypto_kdf.lo CC crypto_mpi.lo CC crypto_paillier.lo CC crypto_pow.lo CC crypto_random.lo CC crypto_rsa.lo CC disk.lo CC dnsparser.lo CC dnsstub.lo CC getopt.lo CC getopt_helpers.lo CC helper.lo CC load.lo CC mst.lo CC mq.lo CC nc.lo CC network.lo CC op.lo CC os_installation.lo CC os_network.lo CC os_priority.lo CC peer.lo CC plugin.lo CC program.lo CC regex.lo CC resolver_api.lo CC scheduler.lo CC service.lo CC signal.lo CC strings.lo CC time.lo CC tun.lo CC tweetnacl-gnunet.lo CC speedup.lo CC proc_compat.lo CC test_plugin_plug.lo CC gnunet-resolver.o CC gnunet-config.o CC gnunet-ecc.o CC gnunet-scrypt.o CC gnunet-uri.o CC gnunet-service-resolver.o CC gnunet-timeout.o CC gnunet-config-diff.o CC test_common_logging_dummy.o CCLD libgnunetutil.la CCLD libgnunet_plugin_test.la CCLD gnunet-timeout CCLD gnunet-config CCLD gnunet-resolver CCLD gnunet-ecc CCLD gnunet-scrypt CCLD gnunet-uri CCLD gnunet-service-resolver CCLD gnunet-config-diff CCLD test_common_logging_dummy make[3]: Leaving directory '/home/apollo1/gnunet_installation/gnunet/src/util' Making all in nt make[3]: Entering directory '/home/apollo1/gnunet_installation/gnunet/src/nt' CC nt.lo CCLD libgnunetnt.la make[3]: Leaving directory '/home/apollo1/gnunet_installation/gnunet/src/nt' Making all in gnsrecord make[3]: Entering directory '/home/apollo1/gnunet_installation/gnunet/src/gnsrecord' CC gnsrecord.lo CC gnsrecord_serialization.lo CC gnsrecord_crypto.lo CC gnsrecord_misc.lo CC plugin_gnsrecord_dns.lo CCLD libgnunetgnsrecord.la CCLD libgnunet_plugin_gnsrecord_dns.la make[3]: Leaving directory '/home/apollo1/gnunet_installation/gnunet/src/gnsrecord' Making all in hello make[3]: Entering directory '/home/apollo1/gnunet_installation/gnunet/src/hello' CC hello.lo CC address.lo CC hello-ng.lo CC gnunet-hello.o CCLD libgnunethello.la CCLD gnunet-hello make[3]: Leaving directory '/home/apollo1/gnunet_installation/gnunet/src/hello' Making all in block make[3]: Entering directory '/home/apollo1/gnunet_installation/gnunet/src/block' CC block.lo CC bg_bf.lo CC plugin_block_test.lo CC plugin_block_template.lo CCLD libgnunetblock.la CCLD libgnunetblockgroup.la CCLD libgnunet_plugin_block_template.la CCLD libgnunet_plugin_block_test.la ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/home/apollo1/gnunet_installation/gnunet/src/block' Making all in statistics make[3]: Entering directory '/home/apollo1/gnunet_installation/gnunet/src/statistics' CC statistics_api.lo CC gnunet-statistics.o CC gnunet-service-statistics.o CCLD libgnunetstatistics.la CCLD gnunet-statistics CCLD gnunet-service-statistics make[3]: Leaving directory '/home/apollo1/gnunet_installation/gnunet/src/statistics' Making all in arm make[3]: Entering directory '/home/apollo1/gnunet_installation/gnunet/src/arm' CC arm_api.lo CC arm_monitor_api.lo CC gnunet-arm.o CC gnunet-service-arm.o CC mockup-service.o CCLD mockup-service CCLD gnunet-service-arm CCLD libgnunetarm.la CCLD gnunet-arm make[3]: Leaving directory '/home/apollo1/gnunet_installation/gnunet/src/arm' Making all in testing make[3]: Entering directory '/home/apollo1/gnunet_installation/gnunet/src/testing' CC testing.lo CC gnunet-testing.o CC list-keys.o CCLD list-keys CCLD libgnunettesting.la CCLD gnunet-testing make[3]: Leaving directory '/home/apollo1/gnunet_installation/gnunet/src/testing' Making all in json make[3]: Entering directory '/home/apollo1/gnunet_installation/gnunet/src/json' CC libgnunetjson_la-json.lo CC libgnunetjson_la-json_mhd.lo CC libgnunetjson_la-json_generator.lo CC libgnunetjson_la-json_helper.lo CC libgnunetjson_la-json_gnsrecord.lo CCLD libgnunetjson.la .libs/libgnunetjson_la-json_mhd.o: In function `GNUNET_JSON_post_parser': /home/apollo1/gnunet_installation/gnunet/src/json/json_mhd.c:315: undefined reference to `MHD_lookup_connection_value' collect2: error: ld returned 1 exit status Makefile:780: recipe for target 'libgnunetjson.la' failed make[3]: *** [libgnunetjson.la] Error 1 make[3]: Leaving directory '/home/apollo1/gnunet_installation/gnunet/src/json' Makefile:572: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '/home/apollo1/gnunet_installation/gnunet/src' Makefile:637: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/home/apollo1/gnunet_installation/gnunet' Makefile:527: recipe for target 'all' failed make: *** [all] Error 2 apollo1@apollo1-15IKB:~/gnunet_installation/gnunet$