Nokia 5140: gnokii configuration

[Johannes Dieterich]

Hello everybody,

tried to connect my Nokia 5140 via a ca-42 cable (better: look-alike...)  
to my openSuSE 10.2 using gnokii-0.6.14. I have seen that it does not  
appear in the compatibility list (yet, hopefully..) and that there has  
been a thread about the topic. My best result so far has been (first my  
/etc/gnokiirc, then the output when starting xgnokii):

/etc/gnokiircc:

[global]
port = /dev/ttyUSB0
model = 6510
initlength = default
connection = dku5
use_locking = yes
serial_baudrate = 19200
smsc_timeout = 10
[gnokiid]
bindir = /usr/sbin/
[connect_script]
TELEPHONE = 12345678
[disconnect_script]
[logging]
debug = on
rlpdebug = off
xdebug = off


output:

xgnokii
LOG: debug mask is 0x1

(xgnokii:16452): Gtk-WARNING **: horizontal scrolling not implemented

(xgnokii:16452): Gtk-WARNING **: horizontal scrolling not implemented
Lockfile /var/lock/LCK..ttyUSB0 is stale. Overriding it..
phone instance config:
model: 6510
port_device: /dev/ttyUSB0
connection_type: 2
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ttyUSB0
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Switching to FBUS mode
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
[Received Ack of type 1b, seq:  0]
[Sending Ack of type 1b, seq: 1]
Message received: 0x1b / 0x002e
01 39 00 08 00 01 58 28 00 23 56 20 33 2e 31 35 |  9    X( #V 3.15
0a 32 32 2d 31 30 2d 30 34 0a 4e 50 4c 2d 35 0a |  22-10-04 NPL-5
28 63 29 20 4e 6f 6b 69 61 2e 0a 43 00 00       | (c) Nokia. C
Received message type 1b
model length: 5
Received model NPL-5
Identifying...
Message sent: 0x1b / 0x0005
00 01 00 00 41                                  |     A
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
[Received Ack of type 1b, seq:  1]
[Received Ack of type 1b, seq:  2]
[Sending Ack of type 1b, seq: 2]
Message received: 0x1b / 0x001a
01 39 00 01 00 01 41 14 00 10 33 35 35 30 30 34 |  9    A   355004
30 30 35 30 34 33 39 39 30 00                   | 005043990
Received message type 1b
Received imei 355004005043990
[Sending Ack of type 1b, seq: 3]
Message received: 0x1b / 0x002e
01 39 00 08 00 01 58 28 00 23 56 20 33 2e 31 35 |  9    X( #V 3.15
0a 32 32 2d 31 30 2d 30 34 0a 4e 50 4c 2d 35 0a |  22-10-04 NPL-5
28 63 29 20 4e 6f 6b 69 61 2e 0a 43 00 00       | (c) Nokia. C
Received message type 1b
Received revision V 3.15
model length: 5
Received model NPL-5
Found model "NPL-5"
Found model "NPL-5"
Getting network info ...
Message sent: 0x0a / 0x0009
00 01 00 0b 00 02 00 00 00                      |
SM_Block: exiting the retry loop
Message sent: 0x0a / 0x0009
00 01 00 0b 00 02 00 00 00                      |
SM_Block: exiting the retry loop
Message sent: 0x0a / 0x0009
00 01 00 0b 00 02 00 00 00                      |
SM_Block: exiting the retry loop
Getting battery level...
Message sent: 0x17 / 0x0006
00 01 00 0a 02 00                               |
SM_Block: exiting the retry loop
Message sent: 0x17 / 0x0006
00 01 00 0a 02 00                               |
SM_Block: exiting the retry loop
Message sent: 0x17 / 0x0006
00 01 00 0a 02 00                               |
SM_Block: exiting the retry loop
Message sent: 0x19 / 0x0006
00 01 00 1f 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x19 / 0x0006
00 01 00 1f 01 00                               |
SM_Block: exiting the retry loop
Message sent: 0x19 / 0x0006
00 01 00 1f 01 00                               |
SM_Block: exiting the retry loop
Getting network info ...
Message sent: 0x0a / 0x0009
00 01 00 0b 00 02 00 00 00                      |
SM_Block: exiting the retry loop
Message sent: 0x0a / 0x0009
00 01 00 0b 00 02 00 00 00                      |

this "Message sent... SM_Block..." goes then on for ages without any  
result to it, so I've killed it. I also tried it with other models (no  
better results, mostly even worse) and other connections (dlr3p works in  
the same way).

Would be very grateful if someone has an idea how to do it. Preferably  
without killing my phone as mentioned in the one Nokia 5140 thread  
available here...

Thanks,

Johannes