[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
MacOSX success
|
From: |
michael eng |
|
Subject: |
MacOSX success |
|
Date: |
Fri, 15 Jul 2005 20:03:19 +0100 |
Hi everyone,
Writing to report success with the following configuration:
- Mac OS X 10.4.1
- Fink 0.8.0
- Nokia CA-41 cable
- Nokia 6100 phone, v5.51
- Works in both AT and FBUS mode
The build worked fine except make failed because it couldn't find Fink's
libintl in /sw -- this had to be tweaked manually.
The CA-41 is recognised immediately by the kernel, however, it is not
recognised by front end applications as anything other than a
straightforward USB modem.
The tty device assigned varies depending on which port the cable is
plugged into. I think this varies from previous versions.
Trace follows, for those interested...
Best regards,
Michael
--
michael eng
albino~$ uname -a
Darwin albino-w4.london.daydream.org.uk 8.1.0 Darwin Kernel Version 8.1.0: Tue
May 10 18:16:08 PDT 2005; root:xnu-792.1.5.obj~4/RELEASE_PPC Power Macintosh
powerpc
albino~$ dmesg | tail -1
AppleUSBCDCACMData: Version number - 3.1.3, Input buffers 8, Output buffers 4
albino~$ gnokii --identify
GNOKII Version 0.6.7
LOG: debug mask is 0x1
phone instance config:
model: AT
port_device: /dev/cu.usbmodem1911
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Initializing AT capable mobile phone ...
Serial device: opening device /dev/cu.usbmodem1911
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d | ATZ
write: [ATZ<cr>]
Message sent: 0x00 / 0x0005
41 54 45 31 0d | ATE1
write: [ATE1<cr>]
read : [ATE1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000b
02 41 54 45 31 0d 0d 0a 4f 4b 0d | ATE1 OK
Received message type 00
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d | AT+CMEE=1
write: [AT+CMEE=1<cr>]
read : [AT+CMEE=1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x0010
02 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 4f 4b 0d | AT+CMEE=1 OK
Received message type 00
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 4d 0d | AT+CGMM
write: [AT+CGMM<cr>]
read : [AT+CGMM<cr><cr><lf>Nokia 6100<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x001c
02 41 54 2b 43 47 4d 4d 0d 0d 0a 4e 6f 6b 69 61 | AT+CGMM Nokia
20 36 31 30 30 0d 0a 0d 0a 4f 4b 0d | 6100 OK
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 49 0d | AT+CGMI
write: [AT+CGMI<cr>]
read : [AT+CGMI<cr><cr><lf>Nokia<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0017
02 41 54 2b 43 47 4d 49 0d 0d 0a 4e 6f 6b 69 61 | AT+CGMI Nokia
0d 0a 0d 0a 4f 4b 0d | OK
Received message type 06
Message sent: 0x5e / 0x0009
41 54 2b 43 53 43 53 3f 0d | AT+CSCS?
write: [AT+CSCS?<cr>]
read : [AT+CSCS?<cr><cr><lf>+CSCS: "PCCP437"<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x5e / 0x0023
02 41 54 2b 43 53 43 53 3f 0d 0d 0a 2b 43 53 43 | AT+CSCS? +CSC
53 3a 20 22 50 43 43 50 34 33 37 22 0d 0a 0d 0a | S: "PCCP437"
4f 4b 0d | OK
Received message type 5e
Initialisation completed
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 4d 0d | AT+CGMM
write: [AT+CGMM<cr>]
read : [AT+CGMM<cr><cr><lf>Nokia 6100<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x001c
02 41 54 2b 43 47 4d 4d 0d 0d 0a 4e 6f 6b 69 61 | AT+CGMM Nokia
20 36 31 30 30 0d 0a 0d 0a 4f 4b 0d | 6100 OK
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 49 0d | AT+CGMI
write: [AT+CGMI<cr>]
read : [AT+CGMI<cr><cr><lf>Nokia<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0017
02 41 54 2b 43 47 4d 49 0d 0d 0a 4e 6f 6b 69 61 | AT+CGMI Nokia
0d 0a 0d 0a 4f 4b 0d | OK
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 52 0d | AT+CGMR
write: [AT+CGMR<cr>]
read : [AT+CGMR<cr><cr><lf>V 05.51 <cr><lf>27-02-04<cr><lf>NPL-2<cr><lf>(c)
Nokia. <cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0048
02 41 54 2b 43 47 4d 52 0d 0d 0a 56 20 30 35 2e | AT+CGMR V 05.
35 31 20 20 20 20 20 0d 0a 32 37 2d 30 32 2d 30 | 51 27-02-0
34 0d 0a 4e 50 4c 2d 32 0d 0a 28 63 29 20 4e 6f | 4 NPL-2 (c) No
6b 69 61 2e 20 20 20 20 20 20 20 20 20 20 20 20 | kia.
20 0d 0a 0d 0a 4f 4b 0d | OK
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 53 4e 0d | AT+CGSN
write: [AT+CGSN<cr>]
read : [AT+CGSN<cr><cr><lf>354311123456789<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0021
02 41 54 2b 43 47 53 4e 0d 0d 0a 33 35 34 33 31 | AT+CGSN 35431
31 30 30 30 32 31 30 31 34 39 0d 0a 0d 0a 4f 4b | 1123456789 OK
0d |
Received message type 06
IMEI : 354311123456789
Manufacturer : Nokia
Model : Nokia 6100
Revision : V 05.51
Serial device: closing device
albino~$ gnokii --identify
GNOKII Version 0.6.7
LOG: debug mask is 0x1
phone instance config:
model: 6100
port_device: /dev/cu.usbmodem1911
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/cu.usbmodem1911
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Serial device: opening device /dev/cu.usbmodem1911
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Serial device: opening device /dev/cu.usbmodem1911
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
[Received Ack of type 1b, seq: 0]
[Sending Ack of type 1b, seq: 1]
Message received: 0x1b / 0x0032
01 31 00 08 00 01 58 2c 00 26 56 20 30 35 2e 35 | 1 X, &V 05.5
31 20 20 20 20 20 0a 32 37 2d 30 32 2d 30 34 0a | 1 27-02-04
4e 50 4c 2d 32 0a 28 63 29 20 4e 6f 6b 0a 43 00 | NPL-2 (c) Nok C
00 00 |
Received message type 1b
model length: 5
Received model NPL-2
Identifying...
Message sent: 0x1b / 0x0005
00 01 00 00 41 | A
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
[Received Ack of type 1b, seq: 1]
[Received Ack of type 1b, seq: 2]
[Sending Ack of type 1b, seq: 2]
Message received: 0x1b / 0x001a
01 31 00 01 00 01 41 14 00 10 33 35 34 33 31 31 | 1 A 354311
30 30 30 32 31 30 31 34 39 00 | 123456789
Received message type 1b
Received imei 354311123456789
[Sending Ack of type 1b, seq: 3]
Message received: 0x1b / 0x0032
01 31 00 08 00 01 58 2c 00 26 56 20 30 35 2e 35 | 1 X, &V 05.5
31 20 20 20 20 20 0a 32 37 2d 30 32 2d 30 34 0a | 1 27-02-04
4e 50 4c 2d 32 0a 28 63 29 20 4e 6f 6b 0a 43 00 | NPL-2 (c) Nok C
00 00 |
Received message type 1b
Received revision V 05.51
model length: 5
Received model NPL-2
IMEI : 354311123456789
Manufacturer : Nokia
Model : NPL-2
Revision : V 05.51
Serial device: closing device
albino~$ exit
Process shell finished
- MacOSX success,
michael eng <=