[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: New with my Motorola C333
From: |
Fernando Gabriel Barceló Tomás |
Subject: |
Re: New with my Motorola C333 |
Date: |
Mon, 15 Mar 2004 13:40:53 -0300 |
I forgot to eneble usb modem support in may kernel configuration :-)
I'm recompiling it right now and going to try again, this night.
Thanks
El dom, 14-03-2004 a las 07:01, Ron Yorston escribió:
> Fernando Gabriel wrote:
> >But it seems that /dev/ttyACM0 is doesnt linked to the phone.
> >
> >I must change handly some usb configuration?
>
> Hmm, maybe. I'm not sure what you need to do to make it work in
> Debian. On my Fedora system the necessary driver is loaded when
> I plug in the cable. Here's the relevant part of the output from
> the dmesg command:
>
> hub.c: connect-debounce failed, port 1 disabled
> hub.c: new USB device 00:07.2-1, assigned address 2
> usb.c: USB device 2 (vend/prod 0x22b8/0x5802) is not claimed by any active
> driver.
> usb-uhci.c: ENXIO 80000280, flags 0, urb c07f7e00, burb c07f7f00
> usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 9 ret -6
> usb.c: registered new driver acm
> ttyACM0: USB ACM device
> acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN
> adapters
>
> The acm driver is loaded and ttyACM0 is assigned.
>
> Ron
>
>
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/gnokii-users
Saludos de Fernando Barceló
Desde Buenos Aires Argentina
Usuario Registrado Linux Nº 296158