gnewsense-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [gNewSense-users] Re: gNewSense-users Digest, Vol 40, Issue 30


From: Quiliro Ordóñez
Subject: Re: [gNewSense-users] Re: gNewSense-users Digest, Vol 40, Issue 30
Date: Tue, 26 Jan 2010 21:50:36 -0500

2010/1/26 Quiliro Ordóñez <address@hidden>:
> 2010/1/26 Peter Rock <address@hidden>:
>>> Message: 1
>>> Date: Mon, 25 Jan 2010 23:12:29 +0100
>>> From: Sam Geeraerts <address@hidden>
>>> Subject: Re: [gNewSense-users] lemote does not boot after install
>>> To: gNS users list <address@hidden>
>>> Message-ID: <address@hidden>
>>> Content-Type: text/plain; charset=UTF-8; format=flowed
>>
>>> Press del key upon powerup. On PMON type...
>>>
>>> load (usb0,0)/boot/vmlinux-2.6.31.6-libre1
>>> initrd (usb0,0)/boot/initrd.img-2.6.31.6-libre1
>>> g console=tty no_auto_cmd root=/dev/hda1 rootdelay=8 machtype=8.9
>>>
>>> It boots with the installed OS. When done open a terminal and type:
>>
>> Following the instructions on the wiki, I don't have a
>> initrd.img-2.6.31.6-libre1 file on my USB. I have 2 files:
>>
>> vmlinux-2.6.31.6-libre1
>> initrd.gz
>>
>> I tried "load (usb0,0)/vmlinux-2.6.31.6-libre1" and that seemed to be fine.
>> Then "initrd (usb0,0)/initrd.gz" and that didn't give me an error but
>> I don't know if this is what I'm to do
>
> I am very very sorry. the initrd line should read:
>
> initrd (wd0,0)/initrd.gz

Wait a minute..... The previous one was correct!


Are you sure you put:
root=/dev/hda1
on the g line?

-- 
Saludos/Greetings
Quiliro Ordóñez
593(02)340 1517 / 593(09)821 8696
http://quiliro.wordpress.com

"¿Sólo cuando el último árbol esté muerto, el último río envenenado y
el último pez atrapado nos daremos cuenta que no se puede comer
dinero?"
"Only when the last tree is dead, the last river is poisoned and the
last fish is caught will we realize that money is not edible?"




reply via email to

[Prev in Thread] Current Thread [Next in Thread]