[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[gNewSense-users] Trouble shooting with the nvidia drivers ...
From: |
aurelien |
Subject: |
[gNewSense-users] Trouble shooting with the nvidia drivers ... |
Date: |
Thu, 30 Jul 2009 19:06:21 +0200 |
Hello,
If I try to install the nvidia driver differents troubles append, in
general :
- At the restart point the screen (all pixels) seems burning !
- When i launch compiz ... all windows loose there frame
Thanks
Aurélien
My computer (laptop) M3438G Fujitsu Siemens
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-24-generic (address@hidden) (gcc
version 4.2.4 (Ubuntu 4.2.4-1ubuntu4)) #1 SMP Wed Jul 15 09:17:42 UTC
2009 (Ubuntu 2.6.24-24.56gnewsense6-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI
data)
[ 0.000000] BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 00000000fed13000 - 00000000fed1a000
(reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000
(reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 262096) 0 entries of 256
used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262096
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262096
[ 0.000000] On node 0 totalpages: 262096
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32465 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F8110 checksum 0
[ 0.000000] ACPI: RSDP 000F8110, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3FFD0000, 003C (r1 A M I OEMRSDT 10000505
MSFT 97)
[ 0.000000] ACPI: FACP 3FFD0200, 0084 (r2 A M I OEMFACP 10000505
MSFT 97)
[ 0.000000] ACPI: DSDT 3FFD0430, 4A43 (r1 UW____ F18_____ 1
INTL 2002026)
[ 0.000000] ACPI: FACS 3FFDE000, 0040
[ 0.000000] ACPI: APIC 3FFD0390, 0054 (r1 A M I OEMAPIC 10000505
MSFT 97)
[ 0.000000] ACPI: MCFG 3FFD03F0, 003C (r1 A M I OEMMCFG 10000505
MSFT 97)
[ 0.000000] ACPI: OEMB 3FFDE040, 0046 (r1 A M I AMI_OEM 10000505
MSFT 97)
[ 0.000000] ACPI: MCFG 3FFD4E80, 003C (r1 A M I OEMMCFG 10000505
MSFT 97)
[ 0.000000] ACPI: SSDT 3FFD4EC0, 03F6 (r1 AMI CPU1PM 1
INTL 2002026)
[ 0.000000] ACPI: DMI detected: Fujitsu Siemens
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:bed13000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000
- 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000
- 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000
- 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 260049
[ 0.000000] Kernel command line:
root=UUID=8ff488d7-093c-4350-abfe-4807c08eb7e2 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1866.736 MHz processor.
[ 9.210580] Console: colour VGA+ 80x25
[ 9.210584] console [tty0] enabled
[ 9.210875] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 9.211267] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 9.239103] Memory: 1027504k/1048384k available (2176k kernel code,
20220k reserved, 1007k data, 368k init, 130880k highmem)
[ 9.239111] virtual kernel memory layout:
[ 9.239112] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 9.239113] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 9.239114] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 9.239115] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 9.239116] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 9.239118] .data : 0xc0320188 - 0xc041bdc4 (1007 kB)
[ 9.239119] .text : 0xc0100000 - 0xc0320188 (2176 kB)
[ 9.239122] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 9.239154] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4,
CPUs=1, Nodes=1
[ 9.319098] Calibrating delay using timer specific routine.. 3736.54
BogoMIPS (lpj=7473086)
[ 9.319121] Security Framework initialized
[ 9.319127] SELinux: Disabled at boot.
[ 9.319141] AppArmor: AppArmor initialized
[ 9.319145] Failure registering capabilities with primary security
module.
[ 9.319152] Mount-cache hash table entries: 512
[ 9.319263] Initializing cgroup subsys ns
[ 9.319267] Initializing cgroup subsys cpuacct
[ 9.319277] CPU: After generic identify, caps: afe9fbff 00100000
00000000 00000000 00000180 00000000 00000000 00000000
[ 9.319287] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 9.319290] CPU: L2 cache: 2048K
[ 9.319294] CPU: After all inits, caps: afe9fbff 00100000 00000000
00042040 00000180 00000000 00000000 00000000
[ 9.319302] Compat vDSO mapped to ffffe000.
[ 9.319312] Checking 'hlt' instruction... OK.
[ 9.335431] SMP alternatives: switching to UP code
[ 9.337127] Freeing SMP alternatives: 11k freed
[ 9.337227] Early unpacking initramfs... done
[ 9.660338] ACPI: Core revision 20070126
[ 9.660394] ACPI: Looking for DSDT in initramfs... error,
file /DSDT.aml not found.
[ 9.662589] CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
[ 9.662605] Total of 1 processors activated (3736.54 BogoMIPS).
[ 9.662752] ENABLING IO-APIC IRQs
[ 9.662926] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 9.806682] Brought up 1 CPUs
[ 9.806705] CPU0 attaching sched-domain:
[ 9.806708] domain 0: span 01
[ 9.806709] groups: 01
[ 9.806857] net_namespace: 64 bytes
[ 9.806866] Booting paravirtualized kernel on bare hardware
[ 9.807274] Time: 17:54:39 Date: 07/30/09
[ 9.807297] NET: Registered protocol family 16
[ 9.807467] EISA bus registered
[ 9.807487] ACPI: bus type pci registered
[ 9.807677] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
[ 9.807679] PCI: Using configuration type 1
[ 9.807692] Setting up standard PCI resources
[ 9.821004] ACPI: EC: Look up EC in DSDT
[ 9.822885] ACPI: Interpreter enabled
[ 9.822888] ACPI: (supports S0 S3 S4 S5)
[ 9.822900] ACPI: Using IOAPIC for interrupt routing
[ 9.857982] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 9.941396] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data =
0x62
[ 9.941399] ACPI: EC: driver started in interrupt mode
[ 9.941482] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 9.941931] Force enabled HPET at base address 0xfed00000
[ 9.941936] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 9.941940] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 9.942454] PCI: Transparent bridge - 0000:00:1e.0
[ 9.942477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 9.942603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 9.942709] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 10.964472] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 10.964574] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 10.964674] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12
14 15)
[ 10.964773] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12
14 15)
[ 10.964872] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 10.964972] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 10.965072] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 10.965172] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 10.965274] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 10.965302] pnp: PnP ACPI init
[ 10.965309] ACPI: bus type pnp registered
[ 10.970809] pnp: PnP ACPI: found 12 devices
[ 10.970811] ACPI: ACPI bus type pnp unregistered
[ 10.970815] PnPBIOS: Disabled by ACPI PNP
[ 10.971001] PCI: Using ACPI for IRQ routing
[ 10.971004] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 10.971009] PCI: Cannot allocate resource region 7 of bridge
0000:00:1e.0
[ 10.971033] PCI: Cannot allocate resource region 0 of device
0000:01:07.0
[ 10.971035] PCI: Cannot allocate resource region 1 of device
0000:01:07.0
[ 10.971037] PCI: Cannot allocate resource region 2 of device
0000:01:07.0
[ 10.971039] PCI: Cannot allocate resource region 3 of device
0000:01:07.0
[ 10.971041] PCI: Cannot allocate resource region 4 of device
0000:01:07.0
[ 10.971043] PCI: Cannot allocate resource region 5 of device
0000:01:07.0
[ 10.981528] NET: Registered protocol family 8
[ 10.981530] NET: Registered protocol family 20
[ 10.981671] hpet clockevent registered
[ 10.981676] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 10.981680] hpet0: 3 64-bit timers, 14318180 Hz
[ 10.982709] AppArmor: AppArmor Filesystem Enabled
[ 10.985511] Time: tsc clocksource has been installed.
[ 10.993536] system 00:01: iomem range 0xfed13000-0xfed19fff could not
be reserved
[ 10.993543] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 10.993546] system 00:08: ioport range 0x800-0x87f has been reserved
[ 10.993548] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 10.993551] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 10.993554] system 00:08: iomem range 0xfed20000-0xfed8ffff has been
reserved
[ 10.993557] system 00:08: iomem range 0xffb00000-0xffbfffff has been
reserved
[ 10.993560] system 00:08: iomem range 0xfff80000-0xffffffff could not
be reserved
[ 10.993564] system 00:09: iomem range 0xfec00000-0xfec00fff has been
reserved
[ 10.993567] system 00:09: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 10.993574] system 00:0a: iomem range 0xe0000000-0xefffffff has been
reserved
[ 10.993579] system 00:0b: iomem range 0x0-0x9ffff could not be
reserved
[ 10.993582] system 00:0b: iomem range 0xc0000-0xcffff could not be
reserved
[ 10.993585] system 00:0b: iomem range 0xe0000-0xfffff could not be
reserved
[ 10.993588] system 00:0b: iomem range 0x100000-0x3fffffff could not
be reserved
[ 10.993590] system 00:0b: iomem range 0x0-0x0 could not be reserved
[ 11.023918] PCI: Bridge: 0000:00:01.0
[ 11.023920] IO window: disabled.
[ 11.023923] MEM window: faa00000-feafffff
[ 11.023925] PREFETCH window: bfe00000-dfefffff
[ 11.023929] PCI: Bridge: 0000:00:1c.0
[ 11.023931] IO window: d000-dfff
[ 11.023935] MEM window: bfc00000-bfcfffff
[ 11.023938] PREFETCH window: bfd00000-bfdfffff
[ 11.023961] PCI: Bridge: 0000:00:1e.0
[ 11.023962] IO window: disabled.
[ 11.023966] MEM window: fa900000-fa9fffff
[ 11.023969] PREFETCH window: disabled.
[ 11.023984] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 11.023988] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 11.024002] PCI: Enabling device 0000:00:1c.0 (0106 -> 0107)
[ 11.024005] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 11.024010] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 11.024018] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 11.024027] NET: Registered protocol family 2
[ 11.061493] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 11.061703] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 11.062441] TCP bind hash table entries: 65536 (order: 7, 524288
bytes)
[ 11.062915] TCP: Hash tables configured (established 131072 bind
65536)
[ 11.062918] TCP reno registered
[ 11.073581] checking if image is initramfs... it is
[ 11.485041] Switched to high resolution mode on CPU 0
[ 11.703326] Freeing initrd memory: 7087k freed
[ 11.703895] audit: initializing netlink socket (disabled)
[ 11.703910] audit(1248976479.704:1): initialized
[ 11.704072] highmem bounce pool size: 64 pages
[ 11.705803] VFS: Disk quotas dquot_6.5.1
[ 11.705873] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 11.706000] io scheduler noop registered
[ 11.706002] io scheduler anticipatory registered
[ 11.706004] io scheduler deadline registered
[ 11.706013] io scheduler cfq registered (default)
[ 11.732712] Boot video device is 0000:03:00.0
[ 11.732804] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 11.732831] assign_interrupt_mode Found MSI capability
[ 11.732856] Allocate Port Service[0000:00:01.0:pcie00]
[ 11.732922] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 11.732955] assign_interrupt_mode Found MSI capability
[ 11.732982] Allocate Port Service[0000:00:1c.0:pcie00]
[ 11.733011] Allocate Port Service[0000:00:1c.0:pcie02]
[ 11.733187] isapnp: Scanning for PnP cards...
[ 12.085972] isapnp: No Plug & Play device found
[ 12.109917] Real Time Clock Driver v1.12ac
[ 12.110019] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 12.111079] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 12.111145] input: Macintosh mouse button emulation
as /devices/virtual/input/input0
[ 12.111234] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 12.117082] i8042.c: Detected active multiplexing controller, rev
1.0.
[ 12.118104] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 12.118108] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 12.118111] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 12.118113] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 12.118115] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 12.128326] mice: PS/2 mouse device common for all mice
[ 12.128424] EISA: Probing bus 0 at eisa.0
[ 12.128430] Cannot allocate resource for EISA slot 1
[ 12.128450] EISA: Detected 0 cards.
[ 12.128453] cpuidle: using governor ladder
[ 12.128455] cpuidle: using governor menu
[ 12.128541] NET: Registered protocol family 1
[ 12.128574] Using IPI No-Shortcut mode
[ 12.128606] registered taskstats version 1
[ 12.128701] Magic number: 1:954:947
[ 12.128709] hash matches device ttya2
[ 12.128781] hash matches device tty4
[ 12.128799] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 12.128801] EDD information not available.
[ 12.128981] Freeing unused kernel memory: 368k freed
[ 12.129006] Write protecting the kernel read-only data: 800k
[ 12.131312] input: AT Translated Set 2 keyboard
as /devices/platform/i8042/serio0/input/input1
[ 13.305817] fuse init (API version 7.9)
[ 13.324215] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 13.324221] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 13.325768] ACPI: Thermal Zone [THRM] (49 C)
[ 13.810763] usbcore: registered new interface driver usbfs
[ 13.810784] usbcore: registered new interface driver hub
[ 13.814516] usbcore: registered new device driver usb
[ 13.830927] USB Universal Host Controller Interface driver v3.0
[ 13.830985] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level,
low) -> IRQ 17
[ 13.830996] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 13.831000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 13.831322] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 1
[ 13.831349] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000e480
[ 13.831469] usb usb1: configuration #1 chosen from 1 choice
[ 13.831491] hub 1-0:1.0: USB hub found
[ 13.831496] hub 1-0:1.0: 2 ports detected
[ 13.934450] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level,
low) -> IRQ 18
[ 13.934462] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 13.934467] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 13.934488] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 2
[ 13.934515] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000e800
[ 13.934618] usb usb2: configuration #1 chosen from 1 choice
[ 13.934641] hub 2-0:1.0: USB hub found
[ 13.934646] hub 2-0:1.0: 2 ports detected
[ 13.945780] SCSI subsystem initialized
[ 13.990305] libata version 3.00 loaded.
[ 14.038342] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level,
low) -> IRQ 19
[ 14.038354] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 14.038358] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 14.038379] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 3
[ 14.038406] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000e880
[ 14.038515] usb usb3: configuration #1 chosen from 1 choice
[ 14.038538] hub 3-0:1.0: USB hub found
[ 14.038543] hub 3-0:1.0: 2 ports detected
[ 14.142226] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level,
low) -> IRQ 16
[ 14.142238] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 14.142242] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 14.142263] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 4
[ 14.142291] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[ 14.142393] usb usb4: configuration #1 chosen from 1 choice
[ 14.142413] hub 4-0:1.0: USB hub found
[ 14.142419] hub 4-0:1.0: 2 ports detected
[ 14.246295] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level,
low) -> IRQ 17
[ 14.246309] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 14.246313] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 14.246335] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 5
[ 14.250245] ehci_hcd 0000:00:1d.7: debug port 1
[ 14.250250] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 14.250257] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xfebffc00
[ 14.266023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 14.266122] usb usb5: configuration #1 chosen from 1 choice
[ 14.266144] hub 5-0:1.0: USB hub found
[ 14.266151] hub 5-0:1.0: 8 ports detected
[ 14.370078] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 14.370106] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 19 (level,
low) -> IRQ 18
[ 14.370126] r8169 0000:01:05.0: no PCI Express capability
[ 14.370328] eth0: RTL8169sb/8110sb at 0xf8832c00, 00:03:0d:38:f0:96,
XID 10000000 IRQ 18
[ 14.370892] ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 18 (level,
low) -> IRQ 19
[ 14.420590] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]
MMIO=[fa9ff000-fa9ff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 14.424704] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level,
low) -> IRQ 19
[ 14.424734] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 14.424746] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 14.427582] sata_via 0000:01:07.0: version 2.3
[ 14.427601] ACPI: PCI Interrupt 0000:01:07.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 14.427627] sata_via 0000:01:07.0: routed to hard irq line 10
[ 14.428606] scsi0 : sata_via
[ 14.429033] scsi1 : sata_via
[ 14.429450] scsi2 : sata_via
[ 14.429479] ata1: SATA max UDMA/133 port address@hidden bmdma 0x1400 irq
16
[ 14.429483] ata2: SATA max UDMA/133 port address@hidden bmdma 0x1408 irq
16
[ 14.429485] ata3: PATA max UDMA/133 port address@hidden bmdma 0x1410 irq
16
[ 14.893361] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 14.901696] ata1.00: ATA-7: FUJITSU MHT2080BH, 0000104B, max UDMA/100
[ 14.901700] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth
0/32)
[ 14.917678] ata1.00: configured for UDMA/100
[ 14.977248] Clocksource tsc unstable (delta = -2213284804 ns)
[ 14.981326] Time: hpet clocksource has been installed.
[ 15.033312] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 15.033846] ata2.00: ATA-7: FUJITSU MHT2080BH, 0000104B, max UDMA/100
[ 15.033850] ata2.00: 156301488 sectors, multi 16: LBA48 NCQ (depth
0/32)
[ 15.034550] ata2.00: configured for UDMA/100
[ 15.051343] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2080B
0000 PQ: 0 ANSI: 5
[ 15.051645] scsi 1:0:0:0: Direct-Access ATA FUJITSU MHT2080B
0000 PQ: 0 ANSI: 5
[ 15.055840] ata_piix 0000:00:1f.1: version 2.12
[ 15.055855] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level,
low) -> IRQ 19
[ 15.055887] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 15.056169] scsi3 : ata_piix
[ 15.056429] scsi4 : ata_piix
[ 15.057561] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0
irq 14
[ 15.057564] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8
irq 15
[ 15.065915] Driver 'sd' needs updating - please use bus_type methods
[ 15.065986] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[ 15.065997] sd 0:0:0:0: [sda] Write Protect is off
[ 15.066000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 15.066014] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 15.066057] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[ 15.066066] sd 0:0:0:0: [sda] Write Protect is off
[ 15.066068] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 15.066082] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 15.066085] sda: sda1 sda2 sda3
[ 15.091980] sd 0:0:0:0: [sda] Attached SCSI disk
[ 15.092428] sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors
(80026 MB)
[ 15.092438] sd 1:0:0:0: [sdb] Write Protect is off
[ 15.092441] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 15.092455] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 15.092491] sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors
(80026 MB)
[ 15.092500] sd 1:0:0:0: [sdb] Write Protect is off
[ 15.092502] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 15.092516] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 15.092519] sdb:<7>ieee1394: Host added: ID:BUS[0-00:1023]
GUID[00030d4971e37e1b]
[ 15.095716] sdb1
[ 15.095754] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 15.102552] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 15.102568] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 15.210012] ata4.00: ATAPI: _NEC DVD+/-RW ND-6650A, 1.42, max UDMA/33
[ 15.234094] ata4.00: configured for UDMA/33
[ 15.252721] scsi 3:0:0:0: CD-ROM _NEC DVD+-RW ND-6650A
1.42 PQ: 0 ANSI: 5
[ 15.252791] scsi 3:0:0:0: Attached scsi generic sg2 type 5
[ 15.259585] Driver 'sr' needs updating - please use bus_type methods
[ 15.269219] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda
tray
[ 15.269222] Uniform CD-ROM driver Revision: 3.20
[ 15.269262] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 15.317166] Attempting manual resume
[ 15.317170] swsusp: Resume From Partition 8:2
[ 15.317172] PM: Checking swsusp image.
[ 15.317391] PM: Resume from disk failed.
[ 15.344978] kjournald starting. Commit interval 5 seconds
[ 15.344986] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.395704] Linux agpgart interface v0.102
[ 19.491553] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 19.635415] shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
[ 19.675819] input: Power Button (FF) as /devices/virtual/input/input2
[ 19.689977] ACPI: Power Button (FF) [PWRF]
[ 19.690084] input: Lid Switch as /devices/virtual/input/input3
[ 19.690146] ACPI: Lid Switch [LID]
[ 19.690202] input: Sleep Button (CM) as /devices/virtual/input/input4
[ 19.700141] ACPI: Sleep Button (CM) [SLPB]
[ 19.700208] input: Power Button (CM) as /devices/virtual/input/input5
[ 19.715275] ACPI: Power Button (CM) [PWRB]
[ 20.262858] ACPI: AC Adapter [AC0] (on-line)
[ 20.507221] ACPI: Battery Slot [BAT0] (battery present)
[ 20.722474] ACPI Error (utglobal-0126): Unknown exception code:
0xFFFFFFFE [20070126]
[ 20.722482] Pid: 2966, comm: modprobe Not tainted 2.6.24-24-generic
#1
[ 20.722490] [<c024fe88>] acpi_format_exception+0x35/0x3f
[ 20.722501] [<c024ec8a>] acpi_ut_exception+0xc/0x55
[ 20.722506] [<f89eb9e4>] acpi_video_bus_add+0xb0b/0xb1a [video]
[ 20.722513] [<c01d788d>] sysfs_addrm_start+0x6d/0xb0
[ 20.722523] [<c02533ba>] acpi_device_probe+0x33/0x7c
[ 20.722528] [<c0282218>] driver_probe_device+0x88/0x190
[ 20.722533] [<c0216290>] kobject_uevent_env+0xf0/0x3d0
[ 20.722539] [<c028248e>] __driver_attach+0x9e/0xa0
[ 20.722544] [<c028164b>] bus_for_each_dev+0x3b/0x60
[ 20.722548] [<c0282096>] driver_attach+0x16/0x20
[ 20.722552] [<c02823f0>] __driver_attach+0x0/0xa0
[ 20.722555] [<c02819ca>] bus_add_driver+0x8a/0x1e0
[ 20.722560] [<f885402f>] acpi_video_init+0x2f/0x4d [video]
[ 20.722564] [<c0150806>] sys_init_module+0x126/0x19c0
[ 20.722579] [<c0253687>] acpi_bus_register_driver+0x0/0x38
[ 20.722586] [<c01043b2>] sysenter_past_esp+0x6b/0xa9
[ 20.722594] =======================
[ 20.722596] ACPI Exception (video-1718): UNKNOWN_STATUS_CODE, Cant
attach device [20070126]
[ 20.722708] input: Video Bus
as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input6
[ 20.734202] ACPI: Video Device [PEG] (multi-head: yes rom: no post:
no)
[ 21.218139] ACPI: WMI-Acer: Mapper loaded
[ 21.262201] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 21.262222] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 21.345566] intel_rng: FWH not detected
[ 21.453454] iTCO_vendor_support: vendor-support=0
[ 21.497403] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02
(26-Jul-2007)
[ 21.497477] iTCO_wdt: Found a ICH6-M TCO device (Version=2,
TCOBASE=0x0860)
[ 21.497505] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 21.641307] ieee80211_crypt: registered algorithm 'NULL'
[ 21.696691] ieee80211: 802.11 data/management/control stack,
git-1.1.13
[ 21.696695] ieee80211: Copyright (C) 2004-2005 Intel Corporation
<address@hidden>
[ 21.754135] input: PC Speaker
as /devices/platform/pcspkr/input/input7
[ 21.793083] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver,
1.2.2kmprq
[ 21.793087] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 21.793170] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 19 (level,
low) -> IRQ 18
[ 21.801189] ipw2200: Detected Intel PRO/Wireless 2200BG Network
Connection
[ 22.448843] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa0b1, caps:
0xa04713/0x20040a
[ 22.484556] input: SynPS/2 Synaptics TouchPad
as /devices/platform/i8042/serio2/input/input8
[ 23.125431] ipw2200: ipw2200-bss.fw request_firmware failed: Reason
-2
[ 23.125437] ipw2200: Unable to load firmware: -2
[ 23.125440] ipw2200: failed to register network device
[ 23.125510] ACPI: PCI interrupt for device 0000:01:03.0 disabled
[ 23.125525] ipw2200: probe of 0000:01:03.0 failed with error -5
[ 23.315880] lp: driver loaded but no devices found
[ 23.450712] Adding 2096472k swap on /dev/sda2. Priority:-1 extents:1
across:2096472k
[ 23.849998] EXT3 FS on sda3, internal journal
[ 24.338620] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.674542] No dock devices found.
[ 25.293888] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 25.293892] apm: overridden by ACPI.
[ 25.357409] ppdev: user-space parallel port driver
[ 25.439183] audit(1248969301.918:2): type=1503
operation="inode_permission" requested_mask="a::" denied_mask="a::"
name="/dev/tty" pid=4906 profile="/usr/sbin/cupsd" namespace="default"
[ 59.685264] Marking TSC unstable due to: cpufreq changes.
[ 60.670416] r8169: eth0: link up
[ 45.645347] Bluetooth: Core ver 2.11
[ 45.645963] NET: Registered protocol family 31
[ 45.645968] Bluetooth: HCI device and connection manager initialized
[ 45.645973] Bluetooth: HCI socket layer initialized
[ 45.700400] Bluetooth: L2CAP ver 2.9
[ 45.700406] Bluetooth: L2CAP socket layer initialized
[ 26.173967] Bluetooth: RFCOMM socket layer initialized
[ 26.173980] Bluetooth: RFCOMM TTY layer initialized
[ 26.173982] Bluetooth: RFCOMM ver 1.8
[ 63.358325] NET: Registered protocol family 17
[ 64.184890] NET: Registered protocol family 10
[ 64.185616] lo: Disabled Privacy Extensions
[ 29.926450] eth0: no IPv6 routers present
[ 146.811645] usb 2-2: new full speed USB device using uhci_hcd and
address 2
[ 146.882944] usb 2-2: configuration #1 chosen from 1 choice
[ 63.020438] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto
2 vid 0x04A9 pid 0x1091
[ 63.020676] usbcore: registered new interface driver usblp